2-1/8" Long x 1" diameter shank featuring a ball with a 2" high rise above the platform. Fine threads provide superior strength, and the nickel chrome finish offers corrosion protection.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we are going to be taking a look at the CURT trailer ball. So this trailer ball is a little special. What makes it special Is this right here. You can actually get two inches of rise, just by putting this ball on our ball mount. So our ball mount is a four-inch drop and a two-inch rise. But with this, we're actually kind of swapping it around.
We're going to have a two-inch drop and if we flipped it around, we'll have a four-inch rise. So that's kind of crazy how just one ball can completely change what your ball mounts gonna do for you. So if you liked the ball mount, or you just like, "It gets the job done, why do I need a new one I just need an extra inch or two." This is really going to shine for that. We also have some that are only going to be about an inch. So whatever tickles your fancy, just go ahead and grab whatever size is gonna be right for you.
This one is a two-inch rise, but it's also a two-inch ball. So just look on your coupler, make sure it's the same size. And then also take into consideration, that this thing has a capacity of 6,000 pounds. So with our ball mounts 7,500, and then the ball is 6,000. So the lower number of the two is going to be the max of what we can use with this setup.
So 6,000 pounds for this setup. You wanna make sure that you pair that up. And that's one of the things you need to kind of look for. Also, another thing you need to look for is the hole on your ball mount that you have or the ball mount that you're gonna get it needs to be an inch in diameter because the shank is an inch in diameter. We don't want it any bigger because there'll be so much play.
And then anything smaller, of course, is not really going to fit. So that's two things that you need to look for whenever you kind of pairing this up because this thing by itself isn't going to do anything. You need a ball. We have a lot of different options on our website, so just figure out what you need, figure out exactly what you want, and then etrailer's here to hook you up. There really isn't a whole lot when it comes to trailer balls, this was just super awesome. 'Cause, it has that extra rise there. Made of steel. And if you we're to maybe add something else to the setup, just grab some grease just to keep this ball nice and shiny for all the years of use that you're going to do with it. All in all, this is gonna be a great option for ya. And again, this was the CURT two-inch rise, two-inch trailer ball..
Average Customer Rating: 4.8 out of 5 stars (614 Customer Reviews)
2-1/8" Long x 1" diameter shank featuring a ball with a 2" high rise above the platform. Fine threads provide superior strength, and the nickel chrome finish offers corrosion protection.I haven’t used it. I bought it just-in-case and never needed it. I can say that I bought a standard chrome ball at the same time which lost its chrome and instantly rusted so I appreciate that this is matte rather than polished. I’m also glad this exists because it was the perfect solution to a problem I thought I might have had… I just ended up not having that problem. If you buy one, but from etrailer. No better site on the internet
Exactly what I needed for my 4 wheeler to keep the tongue of the trailer from being too low. The price was good and the delivery was quick. The only thing I had to do was to enlarge the hole to fit the one inch shank. Thanks etrailer for having what I needed.
Works for intended purpose quite well. Glad this exists!
Works great. Kept me from having to purchase anew receiver.
Got it to get mor hitch height on my UTV. Amount of rise is as described and solved the issue for my application.
exactly as shown. video of the ball answered questions that I had. easy tightening. Some reviews stated that the ball didnt have cuts for tightening for two wrenches one to tighten the other to keep it from turning. I didnt have a problem one lock washer is chinsed down flat your good. Put it in your hitch for a quarter more turn and your good. with 2" drop this allowed it to become zero drop which was my goal . ordered from etrailer before and will if need in the future. live in cali so it took a few days but it was shipped out a couple hours after I ordered it. Now my bassboat trailer is level
The ball arrived and is exactly as described by the seller. The ball arrived on time and in good condition.
Very good quality product and Customer service was also great.
Perfect fit for 95 Nissan pickup
A simple solution to a sometimes tricky problem, the extra rise on the Curt hitch balls will enable you to zero in on getting the trailer level with minimal effort.
threads were messed up on new ball
Worked as expected
Appears to be excellent quality. Installed easily and will raise the front of my trailer to level it without modifying my hitch
Over and above service. When I ordered I screwed up and ordered two items that were incompatible. I promptly received a call wondering if it was for two seperate applications or to be used together. I was able to rectify the mistake and received the corrected order promptly. Thank you for such good customer service. and the products work wonderfully..Thanks again.
I needed to raise my tongue height to make trailer tow level. This looks like it will do the job. Thanks. etrailer was quick and convenient, got the ball 2 days earlier than promised.
Great quality, Excellent chrome plate over copper plate base on the steel. No problem as long as you can access the nut to tighten it. However, in my application the nut is captured in a recess, so you have to turn the ball to tighten it. There are no flats to wrench he ball. Strap wrench just slipped, leather over pipe wrench jaws got two turns before chrome polished the leather and slipped, triple wrap of duct tape got two more turns before tape ripped and adhesive slipped. Gave up and cranked pipe wrench. To cover scratched chrome masked off ball and around base and painted black to match hitch. Looks like it was made that way.
My popup trailer sits at about neutral to my Tacoma TRD. With a standard hitch it would sit too low/too high depending on orientation. This riser hitch ball is the perfect solution and now my popup is within 3/4" of level to my Tacoma. There are however two bad details about this ball: The design is poor because there is no wrench flat on the body to help tighten the nut. There is no other way than clamping in a vise to tighten the nut. Second, even with a rag, the substandard plating wore off when tightened in the vise. This exposed the copper substrate plating, which will corrode. I had to cover the exposed area with 2 part epoxy to prevent corrosion. I am a huge fan of e-trailer. This product fills my need, but the quality is below average.
The package showed up empty. The end flap of the box ripped. I called and Will said he would ship another one. Please put tape on the box so it doesn’t rip so easily.
easiest way to get a couple more inches rise and keep load capacity
Worked out perfectly. When my truck bed was loaded with heavy
material, could not get trailer tongue wheel completely staight
and locked. Just needed a bit more height, and far cheaper then a whole
new setup !
Needed to make my trailer a bit level when traveling...thank you for product
availability!!!
Solved the problem of getting the trailer level and being able to use the dolly wheel on the trailer. The shaft on the dolly wheel was too short and this extended ball took care of the problem. Great product....great solution.
Nice well made product. It's what I was needing.
Haven't had a chance to use it yet however this saved me quite a bit of money. I needed a rise for my 2011 Dodge Grand Caravan however I already had a ball mount from a previous vehicle. I flipped that ball mount and used this ball with a 2" rise and was able to get close enough to the hitch height I wanted with no issues.
This product was the only way I could find to pull my trailer level. I wish there were 2" ball mounts made with just 1" or less drop. As is with this product the drop significantly reduces ground clearance compared to the level of the receiver.
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.