bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13356
Our Price: $217.94
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
Trailer Hitch 13356 - Visible Cross Tube - CURT
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13356 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (140)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - 13356

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Visible Cross Tube
  • CURT
  • 350 lbs TW
  • 4000 lbs WD GTW
  • 400 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 4,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 400 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

13356 Curt Class 3 Trailer Hitch Receiver

Installation Details 13356 Installation instructions

This Product Fits The Following Vehicles

Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
350 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
4,000 lbs.

Tongue Weight (TW):
400 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

On AWD models the sway-bar brackets will need to be removed, then re-installed with the spacer blocks provided. No drilling required for installation , Exhaust must be temporarily lowered for installation

Customer Satisfaction Score:

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13356

Average Customer Rating:  4.8 out of 5 stars   (140 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Excellent product. Excellent customer service from etrailer !

2011 Toyota Venza

This is hitch is Custom Designed to fit this 2011 Toyota Venza and fits like a glove. See my photo. My son-in-law and I installed this hitch in 30 minutes. Extremely pleased with the quality material used and the workmanship to designed to fit the vehicle. It's beautiful sleek design fits perfectly into the vehicle's molded body design.



Does it rub at all on the bottom of bumper? Did you have to use spacers?



Roger, No it did not rub on the bottom of the Venza bumper body. I only used the parts they sent to use.

Toyota Venza

Ordered the Curt Trailer hitch receiver (2”) from; once delivered I watched the video from their website and proceeded to install the receiver. The install took around 40 min due to the seized nuts under my 11-year old Venza. Other then needing a bit of WD-40 the install was quick and simple. Once on the Venza I dropped in my Thule T2 Pro XTB 2 Bike Rack (also great). Overall a great install, doesn’t look bad and functionally everything I could ask for.

2010 Toyota Venza

The hitch arrived really fast and it was an even faster install. Instructions were clear and helpful. Got everything installed in about 40 minutes. Excited to use it with the bike I just got. Thanks etrailer!

2011 Toyota Venza

Much beefer hitch than it looked online. Will use for more than swagman bike rack.had it installed locally. I felt that I could install myself but my wife said at 70 yr old better not try it lol .installed for $50 in 45 min. Thanks for ur help . We are set to have fun on our bikes


Great second purchase, and easy to delivery, great communication. I called with questions, very helpful and friendly. I bought the Curt trailer hitch, and i made custom bike rack. Thanks again! Chuck


Installation was reasonably easy, start to finish in about an hour. Bolting exhaust back was a little tricky as the hitch is in the way on drivers side. A knuckle socket on end of extension did the trick. raising muffler with a four wheel floor jack helped


Great hitch at a good price. Holding up well. My 3rd hitch from etrailer. Installation fairly straight forward. Some basic skills required, certainly doable for most.


Simple to install. The shipment was complete. Make sure to have extenders when securing sway bar, gas tank and this hitch. Hitch rusts fast! Bought a rust preventative primer and paint.

2015 Toyota Venza

Everything as presented! Prompt on time delivery. Exact fit for our 2014 Toyota Venza. My local auto service center (Wilks Tire and Battery) did the install in 15 minutes. Said in would have been a few more minutes if it had been AWD vehicle but still not difficult.


This is my 2nd trailer hitch from e-Trailer. I have a small trailer I use to haul brush, furniture & my recumbent bike. I was very pleased with my first hitch, but after getting a new car, I needed another hitch. The quality products and video instructions make it straight forward to install. My kit required a wire to run from the back of the vehicle to the battery in front. The video outlined the best path to route the wire to avoid hot parts or areas where the wire could be damaged. The connection at the battery included a fuse to prevent a electrical fire if somehow the wire got damaged, like in an accident. When I ordered the 2nd hitch, I received an email letting me know the hitch I selected was no longer available within 3 hours of my order. They suggested another hitch to fit my vehicle. Whenever the need for another hitch arises I know the only place I will go, etrailer.

Jim M.


The hitch is still working marvelously.

2013 Toyota Venza

The web site provides a great amount of information that made selecting the right trailer hitch easy. I purchased the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2". Ordering and shipping were easy and the product arrived exactly as presented. I cannot say enough about the available installation videos - outstanding and spot-on for my vehicle. Installation was exactly as presented by eTrailer. Overall, my purchase was an great experience and my expectations were exceeded. I will certainly be a repeat customer and will definitely recommend this company based on the incredibly positive experience I had.



Good morning and thank you for following up. I remain completely satisfied with my purchase from etrailer. We have made good use of the product and have absolutely no complaints or concerns. Your company has provided outstanding customer service throughout and I remain most appreciative of the exceptional installation videos you make available.I remain very happy with my decision to purchase through etrailer and refer people to your site when ever I can.


Made in the USA. Heavy, solid, in great shape when received and packed well. Went on without a hitch (Never heard that one before?). Worse part was putting up driver side muffler bracket but that is merely access to the area. Helpful hint was I got the hitch above the muffler pipes and tied up the Driver side as far as I could since it was a little heavy for this 72 year old to hold in place. Had small floor jack under center of hitch and lifted the unit into place high enough to get [assenger bolts started. Finished on Driver side. My 4th etrailer hitch. Will buy nowhere else. Great service.

Dan M.


Great. No surprises. Hindsight I should have looked more at the video cause I mounted the box in the wrong place on my Venza but it is working fine so.. All good. Finish still looks like new.


There were a few scratches on the hitch, but nothing major. It's going under the car. It's going to have more stuff to deal with now.

The instructions and video were very helpful.
I also didn't drop the exhaust. It took 2 people to install. Most people don't have a hoist. What I did was use my two hydraulic jacks to lift the rear end a few more inches to make it easier to move the hitch into place and get the bolts in. That's the easy part. The hardest part was trying to torque the bolts on the driver side of the hitch. The exhaust pipes are almost directly in the way.

It did take me 1hr to install. A good portion of my time was spent looking for an extender and a deep 14mm socket and my swivel adapter. If you aren't going to drop the exhaust. You'll need one to get to the bolts on the one side. But I was able to torque them all down.

Ray G.


Its been terrific! I use it primarily to attach my Yakima bike tray. But Ive hauled reno material in a trailer. The hitch is indispensable.


Made in the USA. Heavy, solid, in great shape when received and packed well. Went on without a hitch (Never heard that one before?). Worse part was putting up driver side muffler bracket but that is merely access to the area. Helpful hint was I got the hitch above the muffler pipes and tied up the Driver side as far as I could since it was a little heavy for this 72 year old to hold in place. Had small floor jack under center of hitch and lifted the unit into place high enough to get [assenger bolts started. Finished on Driver side. My 4th etrailer hitch. Will buy nowhere else. Great service.

Dan M.




Fabulous looking hitch that was installed by my mechanic with no issues.

2013 Toyota Venza

Vehicle= 2013 Toyota Venza. Fit and finish= 2nd to none! Ease of install= 5 stars as in anybody could do this job. Wiring kit= excellent wuality & fit. Shipping was faster than expected!
Overall, I would deal with this company again and again! Far nicer looking product than Reese or Drawtite (all rights reserved and with due respect). The Curt looks as if it came factory installed



Used hitch to move from OH to ME. 1,400 miles with a 3,000 lb Uhaul trailer! And it has come in handy for utility trailers because I dont have a truck. I like that the harness stays inside near the spare tire until needed because it doesnt get all full of dirt and that annoying green corrosion that blows fuses. I still like it alot. I also like the way it looks. It fits up inside the bumper so its mostly hidden, and it looks like a factory installed hitch.


Great Trailer Hitch. Easy to install. The only reason I did not give it 5 stars is the box did not secure it well during shipping so it got a little scratched up during delivery.

Etrailer Expert

Katrina B.


Sometimes the hitches will receive scratches in shipping. When this happens, we recommend using a rust-oleum type paint to cover up those scratchesspots to ensure that they do not corrode in the future. I have attached a link for reference on rust prevention. I have also sent your review over to customer service so they can reach out to you.


It was easier to install then we antisapated...we installed the hitch within the 30 min. as per the instructions.
The most difficult part was re-securing the muffler after we had dropped it for the hitch installation. My brother in law recommend your site. I have recommend it to my friends.

Albert G.


Great no problems. Went to FL with it and worked great


Great product, great price, free fast delivery, both written and video installation instructions. Wow the perfect site for trailer equipment. The product reviews are even educational offering alternative approaches and clarification of already thorough instalation instructions. I wish everything was as exceptional as

Thank You!

Fred C.


Great The Hitch has worked like a charm

2013 Toyota Venza

I took the product to the shop and they installed it 1/2 hour. They were amazed at how easily it was installed. Exactly as advertised. This is the second hitch I have bought and installed and just like the first on my Element this one on my Venza, every hole/bolt lined up perfectly

Bill G.


The product has performed without a hitch pun intended. I have towed my RV a few times and my utility trailer many times, all without any problems with the hitch. I certainly expect it to continue to serve me as intended.


Everything was as stated, ease of install, quality parts, customer service. Shipped and received fast(I'm local)

Toyota Venza

I ordered a 2" CURT trailer hitch for my Toyota Venza. Excellent customer service, fast shipping, and clear and simple installation instructions. After watching an installation tutorial for my specific vehicle on YouTube, I felt confident to install it my myself and saved money. I could not be happier with my purchase, thanks

2015 Toyota Venza

A little concerned because the hitch had torn through the shipping box, but no damage or missing parts. The installation was very straight forward (nice to have the video!). The exhaust makes it impossible to torque properly without a 10" extension. All in all very happy with this hitch on our 2015 Venza.

2012 Chevrolet Volt

Install of both trailer hitch and wiring harness went very smoothly. Total install time for both items to me 1 hour 47 minutes and that included watching etrailer’s online video. The most time consuming part of the install was routing the 12 volt power wire from the spare tire compartment to the battery. Everything was well designed for a do it yourself person at home.

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Recommended Hitch and Wiring Harness for 2015 Toyota Venza
    For your 2015 Toyota Venza the hitch I recommend for you is the Curt # 13356, which is a very popular hitch for your vehicle and our customers who use it have given it a nearly unanimous 5-star review. This is a 2" hitch with a towing capacity of 3,500 lbs and a tongue weight of 350 lbs so you will have no problems using any type of bike rack. I've added a photo of a customer who is using it with a 4-bike Thule rack so you can see how your set up might work. The wiring harness you'll want...
    view full answer...
    Image 1 for
  • Curt or Draw-Tite Class III Hitch for 2015 Toyota Venza
    Between the Curt # 13356 and the Draw-Tite # 75663 Class III trailer hitches for your 2015 Toyota Venza I recommend the Curt # 13356 because of its superior black powder coat finish. This finish tends to last much longer than those from other manufacturers to help extend the overall lifespan on the hitch and resist rust/corrosion. As you probably realized when looking at the two hitches, these units are otherwise pretty much identical. They are going to line right up to existing holes...
    view full answer...
  • Is There a Mounting Spot for the Wiring Harness on a Curt Trailer Hitch Receiver # 13356
    There is a way to store the wiring harness plug for your 2014 Toyota Venza but there is no actual mounting spot on the Curt Trailer Hitch Receiver # 13356. The way demonstrated in the installation video I have attached for the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118482, is to store the wiring under the floor covering inside the hatch. You can then pull out the wiring to connect to your trailer, being sure to stay away from the latch in the center. Using this...
    view full answer...
  • Comparing Trailer Hitch Options for a 2013 Toyota Venza
    For starters I recommend going with a 2" hitch receiver over the 1-1/4" receiver for your 2013 Toyota Venza. The 1-1/4" options tend to have more restrictions as to what they can be used with when it comes to accessories. As for the Draw-Tite # 75663 and the Curt # 13356, these trailer hitches are nearly identical as they have the same weight capacities and designs. The only real difference between the 2 options is that the Curt hitch was made in the USA. I have attached installation...
    view full answer...
  • Are Spacer Blocks Included with Curt Trailer Hitch Receiver # 13356 for 2011 Toyota Venza
    Yes, the spacer blocks are included in the hardware that comes with the Curt Trailer Hitch Receiver, # 13356, for the 2011 Toyota Venza. I have attached a picture of the installation hardware for you.
    view full answer...
    Image 1 for
  • Vehicle Sag To Carrier About 3 Inches Off The Ground In 2010 Toyota Venza
    I looked at your owners manual and your 2010 Venza is not designed to carry a lot of weight. Your hitch may be rated for 350 lbs tongue weight and 3500 lbs towing capacities, but your vehicle is designed primarily as a passenger vehicle. It definitely sounds like you are overloading your vehicle capacity even if the hitch and carrier can hold it, your vehicle cannot. I definitely do not recommend using this combination if your vehicle sags to 3 inches off the ground. Riser kits would...
    view full answer...
  • Does Exhaust have to be Lowered to Install Curt Trailer Hitch on a 2012 Toyota Venza All-Wheel Drive
    According to the instructions for Curt hitch # 13356, linked for reference, lowering of the exhaust is required on all models. And on AWD models you also have to disconnect the sway bar brackets like you said. It might be possible to angle the hitch in without lowering the exhaust but it would be difficult. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or...
    view full answer...
  • Ball Mount Recommendation for 2015 Toyota Venza for 3-1/2 inches of Rise
    For your 2015 Toyota Venza with a 2 inch trailer hitch like the Curt part # 13356 you want to go with a ball mount that allows the trailer to be towed as level as possible. Based on the dimensions you listed you would need a rise of 3-1/2 inches so that the trailer can be towed level. Since we don't have exactly 3-1/2 inches of rise the best choice is a 4 inch rise since the Venza's suspension is most likely going to settle a bit with the tongue weight of the hitch on it and put you right...
    view full answer...
  • Does The Curt Trailer Hitch 13356 For A Toyota Venza Stick Past The Bumper More Than The C12341?
    Both the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13356 and Curt Trailer Hitch Receiver - Class II # C12341 measure 3-1/2" from the center of the hitch pin hole to the most outward part of the rear bumper, so both will stick out exactly the same amount. Between these options I recommend the # 13356 as it does not require a stabilizing strap when using non-trailer loads, and it also has a 2" receiver which gives you a lot more options when it comes to accessories now...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2013 Toyota Venza
    For your 2013 Toyota Venza I recommend Curt Class III trailer hitch # 13356. My father-in-law also has a 2013 Venza and this is the hitch we put on his car. I have linked a video showing that installation for you. The hitch has help up quite well over the years and they have been very happy with it. They also use it for carrying bikes. For a compatible bike rack that will work with mountain bikes I recommend the Kuat Transfer # KU74FR. This rack holds the bikes at the wheels. It tilts...
    view full answer...
  • 2 Class III Trailer Hitch Receiver and Wiring Recommendation For a 2015 Toyota Venza AWD
    The etrailer Trailer Hitch Receiver # e22AR and Curt Trailer Hitch Receiver # 13356 are our only class III receivers that are confirmed to fit your 2015 Toyota Venza AWD. Both receivers include spacer blocks to relocate the rear sway bar since you have an AWD version. I recommend installing the Tekonsha T-One Vehicle Wiring Harness # 118482 when you install the receiver. This 4-way connector will allow for you to connect to most small trailers as well as use Auxiliary Lights # C53201....
    view full answer...
  • Parts Needed to Tow a Trailer with 2009 Toyota Venza
    First you would need a hitch on your 2009 Toyota Venza. For that the most popular option is the Curt hitch part # 13356. This is a Class III hitch with a 2 inch opening that would work well for you. I attached an install video for you to check out as well. For trailer wiring you would then want the part # 118482 which is a custom fit for your vehicle. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a...
    view full answer...
  • Will the Curt Trailer Hitch for the 2010 Toyota Venza Fit with Dual Exhaust and Sway Bar
    As long as the dual exhaust on your Venza is stock the Curt Trailer Hitch for the 2010 Toyota Venza, item # 13356, will fit on your vehicle. The sway bar is located farther forward than the hitch and the hitch will bolt up between the stock exhaust, in two holes in the frame rail, that are covered with tape from the factory. I have provided links to the installation instructions and an installation video for you to review.
    view full answer...
  • Recommended Trailer Hitch and Accessories for Towing 5 x 8 Foot ATV Trailer with 2015 Toyota Venza
    If all you'll ever use the hitch for is towing the trailer you described, the Curt Class II trailer hitch, part # C12341 would work great for you. This hitch uses the smaller 1-1/4 x 1-1/4 inch receiver opening. You also need the ball mount # C45521, pin and clip # F-4, and a 1-7/8 inch ball # A-80 or a 2 inch ball, part # A-82. However, if there's any chance at all you'd use the hitch as an attachment point for a bike rack or a cargo carrying tray like # C18151, you'd be better off going...
    view full answer...
  • Parts Needed For Towing Setup For 2012 Toyota Venza For Towing Pop-Up Camping Trailer
    You have done your homework and have almost everything you need. For your complete towing setup, you will need: Item # 13356 - Curt Hitch (confirmed fit for your 2012 Venza) Item # C56079 - Trailer Wiring Item # ETBC7 - 4-Way to 7-Way Universal Installation Kit for Brake Controller Item # TK94FR- Prodigy RF Wireless Trailer Brake Controller Item # 18159 - Mounting Box (optional, mounting bracket included in Item # ETBC7) Item # 989891 - Ball Mount Kit (Includes: 1 fixed ball mount, 2...
    view full answer...
  • How Visible Is the Draw-Tite #75663 Installed on 2011 Toyota Venza
    Hidden Hitch (which is the same model as the Draw-Tite) is a brand name, and will not necessarily describe how visible the hitch is. If you look at the hitches available for your 2011 Toyota, you will see that they are all similarly designed and would install under the vehicle in the same manner. Neither of them would be more or less visible. I have provided a photo of the Curt Class III hitch, part # 13356 which would be pretty representative of how the available hitches would appear...
    view full answer...
    Image 1 for
  • Is There a Max Depth Dimension for Curt and Draw Tite Hitches that Fit 2009 Toyota Venza
    Both the Draw Tite hitch # 75663 and the Curt # 13356 have open back hitch tubes so your bike rack would fit easily without a depth interference like you mentioned.
    view full answer...
  • Is Hardware Included with Curt Trailer Hitch Receiver for 2013 Toyota Venza
    I looked up your current order and the Curt Trailer Hitch Receiver # 13356 that you purchased does include all the necessary hardware for installation. If you're going to be towing with your 2013 Toyota Venza you'll also need a wiring kit, like # 118482, and ball mount like # 36061. Then for a 2 inch hitch ball use # 19258 or for a 1-7/8 inch use # 19257. I've linked install videos on the hitch and wiring for you to take a look at.
    view full answer...
  • Will the Thule T2 Bike Rack Clear the Rear Bumper on a 2013 Toyota Venza with Rack Folded Up
    With Curt trailer hitch # 13356 installed on a 2013 Toyota Venza we have found that the distance from the center of the hitch pin hole out to clear the rear bumper is 3-1/2 inches, see linked video showing installation. On the Thule T2 for 2 inch trailer hitches 916, 916XT, 916XTR, or TH9044-TH9046 the distance from the center of the hitch pin hole to the closest part of the rack is 4-1/2 inches. So provided you have one of the T2 models listed you will have 1 inch of clearance between...
    view full answer...
  • Parts Needed to Tow Trailer and Carry Hitch Bike Rack on Toyota Venza
    Dual-receiver adapters such as # D-192 and combo ball mount/receivers like # D210 are made for sturdier 2-inch hitches but no such item is made for a 1-1/4-inch hitch since using one would put too much stress on the hitch and possibly even the vehicle too. Your hitch will have a sticker that indicates its Class Rating (Class I or Class II) and its weight capacity, both tongue weight and towing weight. Your Venza owner's manual will tell you if the vehicle can tow and how much weight...
    view full answer...
  • A 4 Bike Rack with 2 Inch Shank Will Fit a CURT Class III Trailer Hitch on a 2011 Toyota Venza
    The CURT Trailer Hitch, # 13356, is a Class III trailer hitch with a 2 inch receiver. It can handle a 4 bike trailer hitch mount bike rack and accepts racks with a 2 inch shank like yours. I have included a link to the installation instructions for the hitch for you to view. I have also included a link to an FAQ article on hitch classes.
    view full answer...
  • Will Curt Hitch 13356 Fit Both 4 Cylinder and 6 Cylinder Models of the 2010 Toyota Venza
    Curt hitch, part # 13356, will fit both the 6 cylinder and 4 cylinder models of your 2010 Toyota Venza. I double checked with a couple of our manufacturers just to make sure.
    view full answer...
  • Where to Install Support Strap When Using Curt Trailer Hitch on 2011 Toyota Venza with Yakima HoldUp
    To avoid contact with the spoiler on your 2011 Toyota Venza you can connect the Stabilizing Strap # 18050 to the safety chain loop on the Curt Trailer Hitch Receiver # C12341 and then loop it around the Yakima HoldUp # Y02445 bike tray that is closest to your trunk. If you want to avoid using the strap altogether you can use the Draw-Tite Trailer Hitch Receiver # 36512 instead. This has the same basic design as the Curt option but it doesn't require the use of a stabilizing strap to keep...
    view full answer...
  • Trailer Hitch Mounted Bike Rack for Hybrid Bikes and an E-Bike on a 2011 Toyota Venza
    The Thule T2 Pro, part # TH83JV is a great bike rack, though it won't be able to hold your A2B E Bike, its still a great rack for your other bikes. If you're really interested in that compatibility with the E-Bike, then the Hollywood Racks Sport Rider, part # HLY84FR is the way to go. With an 80 pound per bike capacity and the ability to carry bikes with up to a 60 inch wheelbase, this rack is built to move the largest bikes on the market. It does come with a hitch and bike lock as well....
    view full answer...

< Previous

Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Robert C
Test Fit:
Robert C
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Jonathan Y
Video by:
Jonathan Y

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.