bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13390
lowest price pledge
Retail:$265.46
Our Price: $178.24
You Save: $87.22
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 35 lbs
Quantity: 
In Stock
13390 - 600 lbs TW CURT Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13390 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (80)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - 13390

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • CURT
  • Visible Cross Tube
  • 600 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
    • Maximum tongue weight: 600 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13390 Curt Class 3 Trailer Hitch Receiver

Installation Details 13390 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13390

Average Customer Rating:  4.9 out of 5 stars   (80 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Easy install of both hitch and wiring. Second hitch I bought from these guys and have been happy with both.




by:
2010 Subaru Outback Wagon

I think this will serve my purpose. I wish to pull a 4x8 utility trailer with 4-wheeler. My son hopes the bolts are strong enough as intended. I thought the hitch would be more hidden but it will be ok as is. Less expensive than the dealership price.
The wiring instructions have it going thru the back and out of the hatch door. Not a good idea so we installed wiring underneath.


Comments
I just purchased a 2014 Subaru outback. I need a 2 hitch to haul my bikes. I already have a Hollywood rack that holds 4 bikes and would like to drive the outback some of the time instead of my gas guzzling Toyota Tundra. Recommendations?
-- comment by: MikeM - 07/14/2013



by:
2013 Subaru Outback Wagon

This Curt trailer hitch fits our 2013 Subaru Outback perfectly. I've installed many hitches and there were no surprises installing this one.
.
The black finish is flawless. You can readily see the hitch when you look at the car but that's OK as it looks very robust. I peeled the stickers of the hitch (like I always do) and it looks like it came with the car from the factory.
.
Oh yea, it works too. I only buy cars that can be equipped with a 2" hitch... for trailers, bike racks or roof rack load extenders. This hitch helps the Outback be a big boy toy.


Comments
The Curt trailer hitch along with the Yakama load extender also from eTrailer turns my Subie into a truck that can haul 4x8 sheet material and lumber up to 20 feet. No need to borrow or rent trucks for these kinds of home improvement runs.
John C - 11/08/2021


by:
Subaru Outback Wagon

Just exactly as the youtube installation video said it would go. My Dad and I noted that the written instructions, hardware kit, and youtube install directions were all in perfect alignment. Excellent quality product that actually went in exactly as it was described! (shocking to us). My Dad was so impressed he's thinking of buying a hitch kit for "Grandma's SUV". Great website, great product videos, great shipping/tracking, and great product! So easy we did it right in the driveway!




by:

The box arrived pretty beat up, but other than some minor scratches, it was ok. The mounting area did not sit flat with the subframe, so O had to shim it with 2 large washers. It sit quite low on the back of the car, but I guess that's to be expected, not being a factory design. The [online] video from etrailer was excellent in showing how to do it. The paper instructions are useless other then giving you how much to torque the bolts. The fit is good. Trimming the exhaust shield was a pain and had to do it several times until it cleared the hitch. Remember to paint the bare metal on all 4 holes you will drill for this car so it doesn't rust. You will need a second person to put the hitch in place. Putting the exhaust back on the hangers is very hard. Remove the rubber hangers completely and lube the hanger bars with silicone or Windex to make it easier to go back on. Don't use oil.


Comments
It is possible that the hitch arrived flexed which could the brackets to not lie flat against the frame. We do have an FAQ that can help with correcting flexed hitches. I am also including a link on hitch installation tips for lowering the exhaust.
-- Etrailer Expert Jenny N - 10/18/2021


by:
2012 Subaru Outback Wagon

Perfect. Instructions and online video helped immensely. Super easy and only slow part for me was drilling new holes, probably a better drill bit would help but with patience I got it. This site could score some extra revenue by selling the size drill bit you need. It's a hefty item, you will need two people to hang it, as the video mentions. Can't wait to get my trailer and get rolling


Comments
Great! No wear or tear noticed even after a year of hauling
Joshua - 05/19/2021


by:

Easy install fit perfect. Video was extremely helpful.




by:
Subaru

It was a pain putting on my Subaru but this hitch is solid so I get why it was difficult to install. I would definitely do it again on my next car!!! It was worth the investment.




by:

Seems to be what I expected. I recommend having a friend help you position the receiver in place. The instructions illustrations were fairly poor; the image made it difficult to determine which factory hole to use. I was roasting in the driveway and rushed which led me to using the wrong factory hole and some re work ( removing those square nuts isnt easily performed). Double check the alignment of the receiver before drilling your holes.


Comments
Still works as it should !
Christopher - 08/17/2021


by:

easy to order, fit the first time. still going strong


Comments
Great. I had it professionally installed. No issues
Cathy - 05/14/2022


by:
2011 Subaru Outback Wagon

I'm no novice when it comes to working on cars, but this installation was much harder than I expected, and took much longer than the estimated 90 minutes on the instructions (that's for a novice). I would definitely recommend removing the muffler, rather than simply removing the rubber hangers. The fit also isn't perfect, it's very snug around the spare tire well.




by:
2010 Subaru Outback Wagon

I purchased this hitch for our Suburu Outback to be able to tow a small camper. After making the purchase it arrived within a few days, and my son and I had installed by the end of that week. What made this easier was the video to show exactly how to install it and the wiring harness that I got with it. The only problem we had with the installation was drilling through the subframe of the car, I'm thinking sharper drill bits next time. We spent 4 days towing the camper around for a short state park vacation and I have since used it for towing u-haul trailers without any issues. A great product, and thanks to etrailer for providing such informative videos.




by:

Installed to be able to use hitch mount bike rack. Works perfect. Was able to throw on a hitch ball and move an open car trailer. Installation on our 2010 Subaru Outback took someone with mechanical knowledge and tools.




by:

Followed the installation instructions; took my time cutting the bolt "fishing" access holes to keep them as small as possible. Reused the plastic caps and RTV'd the holes to keep water and debris out. The hitch fits around the spare tire well like a glove. Excellent.




by:

Received but haven't installed yet. Instructions look fairly straight forward.


Comments
Great
Tommy M - 05/18/2021


by:

Was a tight fit but it works great




by:

Received this hitch in perfect condition in a timely manner. Bit tricky to install but the enclosed innstructions are very clear. I was not too crazy about having to drill holes into the mainframe of a car only 3 weeks old though. Had to patch up the holes with a super quality 3m marine sealant designed for below waterline use. This was to provide a permanent moisture barrier to prevent rust from forming on the freshly cut metal edges. Had the inside rails resprayed with rustproofing compound. Overall, the entire install took me 51 minutes with basic hand tools. I was fortunate that my neighbour has a gargae and provided me with a hoist. Installing this hitch without having the car elevated would be nearly impossible. No pics, sorry. Hands way too dirty to handle a camera. Etrailer has always provided me with exceptional service. They also price matched as per their policy immediately.




by:

This is the third Curt hitch I have purchased from etrailer.com. All have been very well made and relatively easy to install. With this one, however, I thought I might pass on a couple of recommendations. 1. The instructions which accompany the hitch show only three holes in in the frame rail. There are actually four. Using only the three shown in page 1 of the instructions actually places the hitch 4 inches forward (toward the front of the car) than it actually needs to be. Worse yet, these mounting holes (1/4" in diameter) are the exact distance apart for the hitch, so all one needs to do is enlarge them to 1/2 inch for the bolts, so it is easy to mistakenly mount the hitch in the wrong location. If one views the installation video first, it is less easy to be confused, but still possible. 2. I suggest modifying the instructions to show 4 (four) holes and advise the reader to remove the plugs on the two rear-most (on each side) holes. These are already the correct size for the bolts. Mate the two rear-most holes of the hitch with these holes and after affixing the hitch with two bolts using these holes, drill new holes on each frame rail for the other two (forward) attachment points. Continue the installation as shown in the video. I also suggest modifying the instruction document to reflect the information provided in the video - - it is correct. Thank you for a great product and for great service.




by:
2012 Subaru Outback-Wagon

Installation was easy. I recommend watching installation video 1st. Great hitch at a great price ordered on a Sunday....At my door on Wednesday




by:
2013 Subaru Outback Wagon

Great product fit my 2013 Subaru Outback perfectly the instructions and video were helpful for the installation of the hitch and wiring harness. I suggest having someone help you for lifting into place. The hitch works perfect for towing my fishing boat and looks great on the Outback. The price is right also!




by:
2011 Subaru Outback Wagon

I just finished installing my new hitch on my 2011 outback. I am very happy with the results, the hitch fit like a glove and the hardware and instructions are great. I highly recommend watching the instructional
video, it is very helpful. Installation took me about an hour using basic tools. the hitch works very well with my bike rack.
Thanks again to e-trailer for providing a great product and excellent service at a fair price.




by:

Easy install! Make sure you order the proper carbide cutting bit before you start. This will make the installation super easy!




by:
2012 Subaru Outback Wagon

I used this kit on a 2012 Subaru Outback wagon after i got the high price for add-on from the dealer. I viewed the website video, read the instructions and installed it, but in three hours, not 90 minutes. The things i liked were the quality of hardware, good instructions, and the web video. I really liked the bolt snaking tool. The only difference between the 2011 and 2012 is that the muffler is mounted differently, so i had to figure that out myself, but it was pretty easy. The wiring instructions were very good and lead me right to the factory connector. I like the hitch, the quality of the accessory hardware, the bag, and the US flag filler. The only thing i did not like was that the instructions for drilling / enlarging the hole to fish in the bolt seemed to be for smaller bolts than mine and took more time and effort. Again though, i saved $500.00 and this is an excellent kit




by:
2012 Subaru Outback Wagon

The Good:
The product showed up right
away and fits nicely. It seems of good quality, but time will tell for sure. The fish wire method work really well, I was worried it would be troublesome.

The bad:
The written instructions are not the best. I didn't realize I need a 1 1/8" hole saw and thus did not pre-order one. I highly recommend watching the video before you start, its great.




by:

The hitch looks good & does the job.



25
80
Show More Reviews

See what our Experts say about this CURT Trailer Hitch



  • Sealing Openings During Installation of Curt Trailer Hitch # 13390 On 2012 Subaru Outback Wagon
    It is not a requirement to fill any holes created during the installation of the Curt Class III 2-Inch Trailer Hitch # 13390 on your 2012 Subaru Outback Wagon. The bolts will be tight enough when the hitch is installed to maintain a tight seal. If you would like to seal the holes, you can use spray paint or aerosol undercoat to spray the bare metal prior to attaching the hitch. You would need to let the spray dry before hitch installation. I have provided links to the installation instructions...
    view full answer...
  • How Does the Curt Hitch part # 13390 Install on a 2010 Subaru Outback Wagon
    The only way to install the Curt Hitch part # 13390 is to attach it to the rear frame rails of your 2010 Subaru Outback Wagon. See the picture I attached as well as the install video.
    view full answer...
    Image 1 for
  • Compatibility of the Curt Class III Hitch # 13390 on a 2012 Subaru Outback with Dual Exhaust
    My contact at Curt confirmed that the Curt Hitch # 13390 will fit both single and dual exhaust models of the 2012 Subaru Outback. After the hitch is installed and when re-hanging the exhaust, the heat shields will need to be trimmed to be reattached. The instructions will show you exactly where to cut on the shields so they can be reattached to the car.
    view full answer...
  • Dimensions for Curt Trailer Hitch Receiver # 13390 for 2013 Subaru Outback Wagon
    I went out to our warehouse to take a few measurements of the Curt Trailer Hitch Receiver # 13390 referenced in your question. I have attached an image with these dimensions labeled. The total width of the trailer hitch is 25-3/4 inches. The length of the brackets that will attach to your Subaru's frame is 11 inches. The square receiver tube length is 6-1/2 inches. Also, when installing this trailer hitch onto the 2012 Subaru Outback Wagon, there was a measurement of 2-1/2 inches from...
    view full answer...
    Image 1 for
  • Availability of Install Hardware for Curt Trailer Hitch # 13390
    We do sell all of the install hardware for the Curt hitch part # 13390 that you referenced as part # RHK. You'd need to select Curt from the drop down menu on the RHK product page and then enter the part 13390 in the box and you'd be set.
    view full answer...
  • Comparing the Curt and Draw-Tite Trailer Hitches for a 2020 Subaru Legacy
    The Curt Class III Round Tube Receiver Hitch part # 13390 and Draw-Tite Class III Max Frame Receiver Hitch part # 75673 are both excellent options for a 2020 Subaru Legacy. I recommend the Curt Trailer Hitch Receiver because the receiver tube is not tucked back under the bumper as much when compared to the Draw-Tite Class III Max Frame Receiver Hitch. The receiver tube aspect is important, especially for a bike rack as you could have bumper clearance issues when you go to fold the back...
    view full answer...
    Image 1 for
  • 2-Inch Trailer Hitch for 2012 Subaru Outback Wagon
    The three compatible hitches offered for your 2012 Subaru Outback Wagon are 2-inch Class III types like the Curt # 13390, which is the one I recommend for its greater clearance at your bumper. This hitch installs using included hardware and its installation is shown in the linked video; written instructions and helpful hitch install articles are also linked for you. Curt's warranty requires that you use a stabilizing strap like # 18050 to help support the load on the hitch if you use...
    view full answer...
  • Hitch Recommendation for 2011 Subaru Outback Wagon that Allows Thule Doubletrack to Fit
    I have a great solution for you but using the # 75673 would be too close for me to be able to safely recommend the Thule Doubletrack you mentioned. The Curt hitch part # 13390 on the other hand has a distance of only 3-1/2 inches from the pin hole to the outer edge of the bumper to the Thule DoubleTrack TH9054 which should clear folded up or down. This would be the best setup we can recommend.
    view full answer...
  • What Trailer Wiring Harness Is Needed For A 2011 Subaru Outback Wagon
    On the 2011 Subaru Outback Wagon the wiring harness you will need is the Tow Ready T-One Vehicle Wiring Harness, # 118467. I am sending a link to the installation instructions on the wiring harness and a video link of the wiring harness being installed on a 2010 Subaru Outback Wagon.
    view full answer...
  • Best Looking Trailer Hitch Recommendation for a 2012 Subaru Outback Wagon
    All of the hitches we offer for the 2012 Subaru Outback Wagon will have the crosstube and hitch opening visible from the rear. The biggest difference will be whether or not the crosstube is round or square. I think the round tubes stand out less than the square ones so I would think the Curt part # 13390 would be the one you would like most. However, the Draw Tite # 75673 is a bit more recessed under the rear of the vehicle when installed so it would be a trade off. I attached a video...
    view full answer...
  • Differneces Between Class II Hitches Offered for 2010 Subaru Outback
    Hidden Hitch no longer manufactures the hitch for your 2010 Subaru Outback, but I will do a comparison for you. Draw-Tite and Hidden Hitch were essentially identical in style and capacity. The price of the Hidden Hitch model was higher because the hitch included the manufacturer recommended ball mount and the pin and clip used to secure the ball mount into the receiver.The Draw-Tite hitch is a quality hitch and is available in a Class II, # 36493, or Class III option, # 75673. The Curt...
    view full answer...
  • Will the Curt Hitch # 13390 Fit a 2013 Subaru Outback 3.6R with Dual Exhaust
    I spoke with my contact at Curt and he informed me that they have test fit a Curt Hitch # 13390 on a 3.6R with a 6 cylinder and dual exhaust just like yours and it fit just fine. To complete your towing setup you may be interested in the following products: etrailer Ball Mounts # 989900 Tow Ready Custom Fit Vehicle Wiring # 118467
    view full answer...
  • Motorcycle carrier on a 2019 Subaru Legacy 3.6 sedan
    When using the combination of the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch part # e98873 and the Curt Trailer Hitch Receiver part # 13390 the carrier center would be 18 5/16", 16 5/16" or 14 5/16" from the rear bumper of your Legacy depending on which pin hole you choose on the carrier.. You will have to check your owners manual for the information as far as you Legacy's maximum tongue weight rating to ensure you don't exceed that. If your bike is 410 and the carrier is 64 lbs....
    view full answer...
  • Rear Bumper Clearance for Trailer Hitch Receiver on 2013 Subaru Outback When Using Bike Rack
    The Curt Trailer Hitch Receiver # 13390 is a confirmed fit for your 2013 Subaru Outback. The center of the hitch pin hole will be 2-1/2 inches back from the outermost part of the bumper to allow compatibility with any of the bike racks we carry to fit well. For use of this hitch receiver with a bike rack, you will also need stabilizer strap # 18050 in order not to void Curt's warranty. If you do not wish to use the stabilization strap, then I recommend the Draw-Tite trailer hitch receiver...
    view full answer...
  • Curt 13390 Compatibility with 2017 Subaru Outback Wagon
    The Curt Trailer Hitch Receiver # C13206 is a confirmed fit for your 2017 Subaru Outback. The Curt # 13390 is similar in look but will not fit your 2017 Outback. It only fits 2010-2013 model years. The dimensions are different even though the style is similar.
    view full answer...
  • Trailer Hitch for a 2012 Subaru Outback Wagon for Thule T2 Bike Carrier
    On a 2012 Subaru Outback Wagon Draw-Tite trailer hitch # 75673 measures 5-1/4 inches from the center of the hitch pin hole back to clear the bumper on a 2012 Subaru Outback. We have not installed the Curt hitch # 13390 on a 2012 model. But on a 2011 it measured 3-1/2 inches, on a 2014 it was 3 inches, on a 2015 it was 3-1/2 inches, and on a 2010 it was 4 inches. Based on all of this information it would seem the Curt hitch would be the best option. The only catch is that Curt says you...
    view full answer...
  • Best 2 inch Hitch Recommendation for a 2011 Subaru Outback Wagon
    For your 2011 Subaru Outback Wagon I would recommend the Draw-Tite part # 75673 over the Curt Hitch part # 13390 because the Draw-Tite has higher towing capacities and because it does not require the use of a stabilizer strap like part # 18050 when used with a non-supported load like bike rack or cargo carrier.
    view full answer...
  • Which Curt Class III Hitch is a Fit for 2015 Subaru Outback
    The difference is what vehicles each of those hitches will fit. Trailer hitch # C13206 fits 2014 to 2016 Subaru Outbacks. And # 13390 fits the 2015 to 2016 Legacy and 2010 to 2013 Outback. Although the hitches look very similar for your 2015 Outback you would want the # C13206. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Trailer Hitch Installation on a 2013 Subaru Outback 3.6R with Dual Exhaust
    If your 2013 Subaru Outback has dual exhaust the installation process will be the same. You would just follow the same procedure on the right side as you would on the left side. We don't have a video showing installation on a dual exhaust model though. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch...
    view full answer...
  • Does Curt Hitch # 13390 Fit 2011 Subaru Outback 3.6R with Dual Exhaust
    I spoke with my contact at Curt and he informed me that they have test fit a Curt Hitch # 13390 on a Subaru Outback 3.6R with a 6 cylinder and dual exhaust just like your 2011 Subaru Outback 3.6R and it fit just fine. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with...
    view full answer...
  • Curt Class lll Hitch Compatibility With Factory Dual Exhaust On 2011 Subaru Outback 3.6R
    Your 2011 Subaru Outback 3.6R has a 3,000 lb towing capacity. I spoke with my contact at Curt and he stated that the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13390 will fit the 2011 Subaru Wagon with factory dual exhaust. There is some heat shield modification that will need to be done so the trailer hitch will fit properly. I have included a link to the installation instructions for reference and a video showing installation on a similar model. For the 2011 Subaru...
    view full answer...
  • Trailer Hitch, Ball Mount, and Trailer Hitch Ball Recommendations for a 2011 Subaru Outback
    Yes, the 75673 hitch will carry over and fit the 2011 model Outback. We also have the Curt Trailer Hitch, # 13390. This is a Class III trailer hitch rated at 3,500 pounds of gross trailer weight and 350 pounds tongue weight capacity, and it has a 2 inch receiver. I have included a link to the installation details below for the hitches. If you plan on doing some towing with the hitch, I recommend the etrailer.com Ball Mount Kit, # 989900. This kit comes with two ball mounts, two balls,...
    view full answer...
  • Which Trailer Hitch Receiver Will Have the Most Ground Clearance For 2011 Subaru Outback
    Each hitch is positioned to sit tucked up and close to the bumper as you can see on the product page pictures. All of the hitch receivers available for the 2011 Subaru Outback will sit in the same general position with ground clearance varying slightly from each hitch. For example, from the ground to the top of the receiver on the Draw-Tite Trailer Hitch, part # 75673, measures 14-1/2 inches. So you would have approximately 12-1/2 inches from the ground to the bottom of the receiver, as...
    view full answer...
  • Trailer Hitch Recommendation for a 2015 Subaru Outback Wagon
    The 2014 and 2015 Subaru Outback Wagons share the same hitch fits. So the Curt Hitch # 13390 would fit either vehicle. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Eric H
Updated by:
Eric H
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Ryan G
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.