bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class I
  5. 1000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11254
Retail:$406.95
Our Price: $256.94
You Save: $150.01
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 24 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11254 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (58)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C11254

  • 1-1/4 Inch Hitch
  • Class I
  • 1000 lbs GTW
  • Visible Cross Tube
  • CURT
  • 100 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 1,000 lbs
    • Maximum tongue weight: 100 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11254 Curt Class 1 Trailer Hitch Receiver

Installation Details C11254 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11254

Average Customer Rating:  4.8 out of 5 stars   (58 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

installation was easy, shipping was fast, quality is wonderful. the reason it gets 4 starts is because the hitch sits REAL close to part of the exhaust tips and at Idle it rattles quite bad. I had to take the hitch back off and grind down the corners that rattled with the exhaust. (I only use this hitch for a spare tire mount so I wasn't worried about messing up the integrity of the hitch while under load)

Charles H.

5/17/2024

It has been great to me, I actually use this to tow a small trailer with my motorcycle on it. sometimes 4 hours of interstate or a couple hours of highway. does great!



by:
2013 Hyundai Veloster

Yes, I received the Class I hitch that I ordered for my 2013 Hyundai Veloster. It truly fits like a glove. The installation was simple. The look and work of the hitch is superb. I am very pleased with the look of the product, it feels very sturdy and secure. I will say, I have not attached the bike rack yet, so I will follow-up with you when I put the hitch to work. Back to the product tho, the instructions were so right on. I am very impressed with not only the product but the ease of installation. The hardest part was making that one hole a bit larger like instructed but again very easy to do with the right tools. I want to thank you for an excellent product and also would like to mention your company and the service I have received. You guys are what having a business is about. Very professional and attentive. Amazing customer service! Thank you again!

Natalia

7/25/2014

What type of rack did you buy? How many bikes can you load?

Etrailer Expert

Rachael H.

7/25/2014

Since this trailer hitch is classified as a Class I hitch, it is limited to only supporting 2 bikes on a bike rack. The additional weight and leverage of more than 2 bikes loaded on a bike rack will exceed the forces that the hitch is rated for. This could cause dammage to the hitch, the vehicle, bike rack or bikes.


by:
2017 Hyundai Veloster

Absolutely perfect! This arrived within the expected timeframe and went on without any issue. We were able to pull a small motorcycle trailer around on a cross country trip that accumulated almost 6k miles and not once did we feel we’d lose the hitch or the trailer. There was a minor hiccup out in the middle of nowhere AZ where we hit a cattle guard a bit too high rate of speed and the only damage was losing the electrical connector plug. Easy fix and we were back on the road and we were very happy that the hitch did not budge or bend. Extremely happy with the purchase!!



by:

I haven't used the bike rack yet, I did finally installed the Curt Trailer Hitch, I like it, it looks nice especially the color, it matches the color of my vehicle, not only liking your products, your Employees are the best in all of the whole package deal. I live in Alaska and I had so many problems getting a straight answer on a single question from my local trailer dealer, from the parts employee to his supervisor,every time I called about my order for my hitch, I would get a different excuse, always some kind of runaround, I was not happy TO say the least, this went on for a few days, until finally I called the General manager, guess what, I was put through to a voice mail, And he never returned my phone call, I almost forgot to mention this was after ordering my hitch and patiently waiting almost or even a whole month, needless to say, from now on Etrailer is the only place I would like to do business with.



by:

I love my trailer hitch for my Veloster 2017. The direction is so easy to follow, and I installed it myself! It's been a year, and it's holding very well! Thank you!



by:

Product is great, really well built and is really sturdy feeling. Came in a good sized box so it didn’t have any damage or anything. I bought it in March and it got here in May. I’m sure the delay had to do with the way that everything is right now. I called customer support to see if there were any updates and they were very helpful. Bottom line is they have great products and are a great help!

Elijah

5/23/2022

This Hitch has been absolutely perfect. Ive been able to bring my bikes with me anywhere I want to go! I Work in a bike shop and customers often ask about hitch installation for bike racks. I usually refer them to etrailer because of how much I trust their products. After a year 1010 recommend.



by:

This hitch works great. Shout out to etrailer for being the only website that had this model in stock



by:
2016 Hyundai Veloster

Was fairly easy to install live it so f ar.



by:
2017 Hyundai Veloster

It took 20 min to put on fit like a glove.very good product. Going to use with bicke rack



by:
2016 Hyundai Veloster

Amazing product, had a. 16 hour drive and it held up nicely.

Patrick J.

6/1/2019

I still use this product now and again works great. I do recommend this product for anyone with a veloster who needs towing.



by:
2016 Hyundai Veloster

I installed the Curt trailer hitch this morning on my 2016 Veloster Turbo. Extremely straight forward install with one caveat. The 2016 has a plastic/fiber shroud on the driver side the impedes the location of the access hole for the carriage bolt. I found it necessary to cut away the section that lies between the frame and the hitch. Without the removal of the plastic, the attachment of the lower most carriage bolt was not possible. Not a big deal and very simple to work around. Perhaps a better solution would be to remove this all together. In my opinion, this is a high quality product and a great value. Video of the install was very helpful. I used 8 1/2 inch Rhino ramps and an extra set of hands just to get the bolts started.

Thomas B.

12/9/2015

I was wondering what style of Turbo you have? i have the 2016 Veloster Turbo and i removed the Shroud all together and it still would not go and and I could not tell what was impeding i thought it was just the exhaust and maybe it was a design change... any help would be great..

Kirk C.

12/9/2015

Thomas B., Thomas, I cut away the plastic shroud on the drivers side of the vehicle. This allowed the hitch to be bolted in place. I had to bench press the hitch in place and my wife ed to bolt that runs horizontal. It required a bit of force but once the bolt was in place, it snugs up nicely. I also used a couple of zip ties to approximate the exhaust pipe support and the body. It raised the exhaust pipe up just a bit to clear the metal ringflange ? so that it would not bang on the hitch.Hope this helps,



by:
2013 Hyundai Veloster

Very easy installation, just follow the directions. Fast delivery as usual with etrailer. Hitch looks great and comes with everything for installation (except tools). Takes 30 minutes to an hour to install depending on how good you are with tools.

Edward

3/27/2014

The hitch is great! I use it a lot in the summer. Thanks for the follow up....



by:

Fit perfectly and more the video you have to put it on help so much put it on my car in no time thanks



by:
2013 Hyundai Veloster

Wont buy again. Didnt line up like it was suppose to. The tow package sat litterally 3 mm from the exhaust and was hitting the exhaust. It would rattle like a bat outta hell. Had to change the exhaust hangers to raise the exhaust. The package rubs the bumper like crazy. And i have the package bolted up correctly. Its kinda hard to mess it up because it can only bolt in the holes that are there. Just a disappointment. The videos made it look so great. It really isnt. Other than that. Good product.

Etrailer Expert

Mike L.

8/13/2018

The exhaust system at the rear of the car is attached to the vehicle using rubber isolators and easily bendable exhaust hangers. Because of this, the actual position of the exhaust system can vary a bit from vehicle to vehicle. When the hitch is installed, its position will not vary from vehicle to vehicle. The large tolerances in the exhaust system is what can allow the rattle to occur. In other words, its not the fault of the hitch or its design. Youll just need to create a bit more space between the hitch and the exhaust. This is a common occurrence that is easily remedied by slightly bending the exhaust hanger. Ive linked you to a help article that addresses how to easily fix the rattle.



by:
Ford Edge

Very tight fit on my Hyundai Veloster. No room for error. Plan on wrestling with the hitch if you don't have access to a lift. Both of the factory chrome trim pieces for the exhaust come in contact with the hitch and make a rattling sound when taking off and stopping. You have to slightly bend the edge of the exhaust trim rings to stop the rattling. Otherwise a great hitch. Sure beats using a hatch mounted carrier. Highly recommended.



by:
2005 Nissan Frontier

This is a front hitch for my 2005 Nissan Frontier pickup. The packaging and required bolts were intact, and the accompanying instruction were easy to understand. As noted previously by someone elses post, the mounting holes didn't quite line up to the holes in the frame, but a handful of whacks with a 6 pound sledge fixed it easily. This is a 2 person task or one person with very strong arms.

I would recommend this item



by:
2012 Hyundai Veloster

My hitch came well packed, and it looks like a well made product. The paint finish is good, and there are no weld boogers or anything nastying the surface up.

The hitch is RIDICULOUSLY SIMPLE to install, with EXCELLENT clear, easy to follow instructions.

The hardest part of the install was getting the hitch onto the bolts, and it was only hard because I was doing it solo. I used a spare jack stand to hold one end up while I attached the other. If you have a helper for the lift onto the bolts, then this is the easiest job you'll do all day.

Once installed, I'm not 100% thrilled with the pin/clip that holds the ball mount in place. The pin goes in fine, but then there's no good angle to get the clip in. I have to come up through the safety chain holes with the clip, that that doesn't seem optimal. I'll likely end up getting a receiver lock instead, so it's not a huge deal.



by:
2013 Hyundai Veloster

I absolutely love this trailer hitch! I bought it to use with a Yakima HoldUp bike rack and it works perfectly. Though I do have a con about this hitch. I have a 2013 Hyundai Veloster Turbo and this was quite difficult to install. Took about 2 hours. Definitely wasn't as easy as the video. You'll have to pull the under-plastic shroud out a little to prevent it from pushing against the hitch so you can line up the 3 main bolts. I also had to jack up the center of the hitch while the 3 main bolts were installed in order to for the 4th large bolt to fit through the tow loop. It just wouldn't line up. The center plastic of the exhaust in the bottom was in the way. You can cut a little slot to allow for clearance but I just used a jack to push the hitch up so the bolt will go through the tow loop. Take note that the hitch will touch against the bottom plastic but no need to worry as it fits perfect. That was the hardest part. This hitch fits 100% very snug with no wiggle room which is why it was difficult to install. After that everything was good. All in all the hitch works perfectly! I'm very satisfied. :) I'll put pictures up soon.



by:
2019 Toyota RAV4

Great product and easy to install. Looks good also.



by:
2016 Hyundai Veloster

Solid product and the videos were extremely helpful.
I have a 2016 Velostar which requires some modification of the rear driver's side plastic splashguard but it's easy to remove: 2 screws to the undercarriage and 2 plastic push pins on to the bumper and wheel well respectively (These can be easily pulled with a standard screwdriver.
Installation required either a lift or set of ramps. I have a set of steel ramps and that's all the height needed.
a second person helps with holding up the steel bar but the prep only takes about 10 minutes.
Mount the top drivers side bolt finger tight first then do the two passenger side bolts. I recommend tightening these enough to make mounting the last larger bolt to the tow. This required a little finesse to mount then tighten all bolts as described.

Over all very pleased with this mount.



by:
2013 Hyundai Veloster

Very happy with the product, service and speedy delivery. The hitch installed very easily. 2013 Veloster turbo, mounted on in about 30 minutes with no problem. A hammer was the only additional tool needed. That was to bang the exhaust plate back just slightly. Using this hitch to pull a Sea Doo ski. Very nice tight fit, no modification needed when installing correctly.



by:

Really faster shipping



by:

Hitch was very easy to install even by myself. I will say on the turbo model it does fit but has 1 trim bracket on passenger side of rear fascia that gets in the way. It's your choice to trim it off or get below the hitch frame when mounting. Pics on etrailer.com show a turbo model but I don't see the trim bracket in photos. I have a 2013 year model. I would recommend this to others for hauling bikes and light duty items.



by:
Hyundai Veloster

I recently purchased a hyundia veloster and needed to carry two bicycles. This trailer hitch made that possible. The hitch fit as expected. One hole had to be drilled and the heat shield bent. There were some hidden nuts ghat had to be installed with fish wire. I had a dealer install mine sine it is too heavy to hold and mark the drill hole by myself. Looks good below the exaust.



by:
2013 Hyundai Veloster

Very nice hitch kit. Straightforward and simple installation. Requires drilling one hole, but its just boring out an existing hole, so its not that difficult. 0ther than that, hitch bolts on very firmly and tucks in nicely directly below the exhaust pipe on a 2013 Hyundai Veloster. Using it for a bike rack, and it's working great.


25
58
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • How to Carry Bikes with a 2014 Hyundai Veloster
    I have a solution that will allow you to transport bikes with your 2014 Hyundai Veloster, but there are no trunk racks that are confirmed as fits for your vehicle. Instead you would want to go with a hitch mounted option. For a hitch you would want the Curt part # C11254. I attached an install video for you to check out as well. The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to use, and because the rack has an angled shank that would raise the bike...
    view full answer...
  • Is a Trailer Hitch and Hitch Mount Bike Rack a Good Idea on 2013 Hyundai Veloster w/Center Exhaust
    To be perfectly honest a hitch mount bike rack is not the best idea on a 2013 Hyundai Veloster or any vehicle that has center exhaust. The best option if a hitch mount bike rack is what you want is to use one that is made all of metal. Aluminum bike racks, such as Kuat racks, dissipate heat better than steel. Plastic will melt. However repeatedly heating and cooling metal can damage it over time so I would avoid going with a hitch mount bike rack. The better option if you want to carry...
    view full answer...
  • Trailer Hitch and Bike Rack for 2017 Hyundai Veloster
    For a hitch that fits your 2017 Hyundai Veloster we have the Curt part # C11254 as the only option but it will work great to carry a 2 bike rack like the Hollywood Racks Trail Rider part # HR200Z that I recommend highly as well since it's a easy to load/unload rack that's very stable and also very well built.
    view full answer...
  • Is There a Trailer Hitch for a 2017 Hyundai Veloster
    I spoke with Curt and they said they have not yet had a 2017 Hyundai Veloster in to test the Curt Trailer Hitch Receiver part # C11254 which is why they do not list this as a fit. However, we have had a customer (see below) who installed this on their 2017 model and confirmed it was in fact a fit.
    view full answer...
    Image 1 for Image 2 for
  • Hitch Mounted Bike Rack Recommendation for a 2012 Hyundai Veloster
    The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to use, and because the rack has an angled shank that would raise the bike rack up by three inches providing additional ground clearance. Because of that, this is the rack I'd recommend for you. The rack includes an anti-rattle hitch bolt, but a combination anti-rattle hitch lock/cable lock is available separately as part # S64031. This rack can accommodate bikes with wheelbases that are up to 66 inches...
    view full answer...
  • Recommended Trailer Hitch Receiver and Bike Rack for 2015 Hyundai Veloster
    The Saris Bike Porter was a fit for your 2015 Hyundai Veloster but the manufacturer has discontinued that product. The good news is we have had an updated fit for a trailer hitch and now have a confirmed fit for your Veloster in the Curt Trailer Hitch Receiver - Class I # C11254. Then I recommend a Class I compatible bike rack like the Swagman XC 2-Bike Rack # S64650. Then I also recommend the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 1-1/4" & Combo Shanks - 7' # S64031...
    view full answer...
  • Trailer Hitch Fit for a 2016 Hyundai Veloster
    The Curt Trailer Hitch Receiver # C11254 that fits your 2014 Hyundai Veloster is also a fit for the 2016 Veloster so you're good to go! Just be sure to pick up new hardware as hitch hardware is designed to only be torqued down once. To replace your hardware you need the part # RHK where you'll enter your hitch info and we'll send you out a hardware kit! Attached is an installation video for you to check out.
    view full answer...
    Image 1 for
  • Bike Rack Recommendation for a 2013 Hyundai Veloster
    I have a solution for carrying bikes with your 2013 Hyundai Veloster, but there are no trunk mounted options available that are confirmed as fits. You would need to go with a hitch mounted option. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info. For a hitch you would then need the...
    view full answer...
  • Largest Cargo Carrier Recommendation for 2015 Hyundai Veloster
    For your 2015 Hyundai Veloster the Curt Hitch part # C11254 is a confirmed fit and would work well for carrying a cargo carrier. You will need to use the stabilizer strap part # 18050 with this hitch when the carrier is installed as Curt requires the use of a stabilizer strap with this hitch when carrying a non-supported load. The biggest carrier we have that fits a Class I hitch like this is the Reese part # 63155 which measures 20 inches by 47 inches. This carrier has a rise shank of...
    view full answer...
  • Trailer Hitch Availability for 2013 Hyundai Veloster
    We only have one Class I hitch available for your 2013 Hyundai Veloster. For that you'd want the Curt hitch part # C11254. The higher Class hitches for vehicles are only available for vehicles that have higher towing capacities.
    view full answer...
  • Recommendation for Carrying 2 Bikes on the Trunk of a 2012 Hyundai Veloster
    At the time we answered that question we did not have any fits that would work on the 2012 Hyundai Velostar. At the current time, I have the SeaSucker Komodo Bike Rack for 1 Bike - Fork Mount - Vacuum Cup Mounted - Aqua Blue # 298-BK1910-AB. This unique rack will work with your Velostar and comes in 4 colors. Check out the link to see this amazing product. I attached a review video for this rack for you to check out.
    view full answer...
  • Trunk Rack for 2013 Hyundai Veloster
    The 2-bike trunk-mount carrier you referenced, the Thule Passage # TH910XT, is not a good fit for vehicles like your Veloster that have a rear spoiler at roof level. That spoiler prohibits the use of a traditional trunk rack. You have two ways that you can still carry bikes on your Veloster. First, you could use the suction-cup type carriers # 298-BK1910-AB but this only carries one bike and is quite costly. Therefore, my recommendation for you is to install a Curt hitch # C11254 which...
    view full answer...
  • Center Exhaust on 2013 Hyundai Veloster Can Melt Plastic Trailer Hitch Accessories
    The center exhaust on the 2013 Hyundai Veloster is fairly high up in relationship to where a hitch receiver would be. That is going to be a problem for any hitch mounted accessory. Interestingly enough the bike rack probably ended up protecting the bikes. The only option for this is to have an exhaust down turn, see link, to direct the exhaust downward instead of straight out. The only problem with this is finding one that fits the exhaust on a Veloster. A metal handle is not available...
    view full answer...
  • Trailer Hitch Fit for 2015 Hyundai Veloster Turbo
    Good question. You can tow with a vehicle up to whatever trailer weight its manufacturer says you can. Your owner's manual should indicate towing capacity. I checked an online edition of the manual and towing the car when it is disabled is covered starting on page 6-27 but there is no mention made to trailer towing. You will want to check the printed manual supplied with the car to confirm if it can tow and if so how much trailer weight. Sometimes a hitch that is made for a given car...
    view full answer...
  • Trailer Hitch Recommendation for a 2013 Hyundai Veloster
    The only hitch we have for your 2013 Hyundai Veloster is the Curt part # C11254 which is a 1-1/4 inch trailer hitch. 2 inch hitches are reserved for larger vehicles like trucks and SUVs. I attached an install video for you to check out as well. There's no way to install the 2 inch bike rack on your vehicle so you would have to upgrade your bike rack at this time. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670....
    view full answer...
  • Platform Bike Recommendation for a 2013 Hyundai Veloster
    To use a platform rack with your 2013 Hyundai Veloster you are going to first need to install a hitch on your vehicle since I checked Thule does not recommend the Thule OutWay part # TH65JV for your vehicle. Let's start with a hitch, for that I would recommend the Curt hitch part # C11254. Curt recommends that all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. Failure to properly support these loads will void your hitch warranty...
    view full answer...
  • Is Drilling Required to Install Curt Trailer Hitch # C11254 on a 2012 Hyundai Veloster
    To install the Curt trailer hitch # C11254, on your 2012 Hyundai Veloster, there is some drilling involved but only to enlarge existing holes on the frame where the hitch will bolt into place. Take a look at the instructions I have linked for you. This is a Class I hitch and it has a gross trailer weight of 1,000 pounds and a tongue weight capacity of 100 pounds. Consult your vehicle owners manual to determine if you can tow anything with the hitch. It comes with a ball mount, hitch pin...
    view full answer...
  • Does Curt Hitch # C11254 Fit 2016 Hyundai Veloster Turbo Rally Edition
    Curt has told us that their hitch part # C11254 fits all models of the 2016 Hyundai Veloster so it would work on the Turbo Rally Edition as well.
    view full answer...
  • Fit and Compatibility of Curt Trailer Hitch on a 2014 Hyundai Veloster Automatic
    Great news! The Curt Trailer Hitch # C11254 is a confirmed fit for all models of the Veloster including your automatic with more of the rectangular exhaust. We just had the opportunity to video a different model Veloster than yours here at our studio. The installation will be the same just the design of the exhaust will look slightly different. I've linked an image of the photo Curt uses in their instructions which is the exhaust I believe you are referring to. It's important to note...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch, Wiring, and Ball Mount for 2016 Hyundai Veloster
    Starting with the trailer hitch, the Curt Class I Round Tube Receiver Hitch # C11254 that you referenced is confirmed to fit your 2016 Hyundai Veloster and will work well. This Class I hitch will provide you with a 1-1/4 inch receiver opening and features a towing capacity of 1,000 pounds. I also recommend verifying the vehicle's capacity by checking your copy of the owner's manual. You will always need to follow whichever limit is lower, the vehicle's or the hitch's. One thing of note...
    view full answer...
  • What Does Curt Hitch C11254 Weigh
    The Curt hitch # C11254 that you referenced weighs 25 lbs.
    view full answer...
  • Bike Rack Solution for Carrying 2 Bikes with 2012 Hyndai Veloster
    I can help you carry two bikes with your 2012 Hyundai Veloster hatchback but the trunk racks that fit your vehicle are only single bike racks and are pretty expensive for what you'd get. So instead you'd need a hitch like the # C11254 so that you could carry a bike rack like the Hollywood Racks Destination part # HLY94FRwhich is lighter weight, easy to load, and very stable. The lighter duty hitches like what fit lighter duty vehicles like yours are limited to carrying up to two bikes...
    view full answer...
  • Compatibility of Yakima Bowdown and Thule Hull-a-Port Kayak Carriers on Roof Rack of 2013 Veloster
    You are correct that the short curved roof line on your 2013 Hyundai Veloster poses a challenge to fitting both roof racks and some roof-mount accessories such as your Yakima Bowdown and Thule Hull-a-Port kayak carriers, as well as other items such as cargo boxes. Also, operation of the rear hatch and optional glass sun roof may be interfered with by either a roof rack itself or by certain accessory items installed on it. I suggest that your first step be a confirmation with your local...
    view full answer...
  • Capacity for the Curt Hitch part # C11254 for a 2013 Hyundai Veloster
    Yes, the Curt Hitch part # C11254 that you referenced has a 1,000 lb maximum trailer weight rating. If the trailer you plan on towing is less than 1,000 lbs and has a tongue weight of less than 100 lbs then this hitch would work well for you. To complete your towing setup you may also be interested in the Wiring Harness Part # C59496. Curt Ball Mount part # C45521, Hitch Ball with 1-7/8 inch diameter part # A-80, and # A-82 for a 2 inch ball may also interest you.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Dan D
Edited by:
Dan D
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Written by:
Lindsey S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Chris R
Video by:
Chris R
Employee Jacob H
Video by:
Jacob H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.