To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (59 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.Great hitch. Not hard to install, if you have the right tools. I didn’t want to drop the muffler on my 2007 Honda Accord, so I used an extension to get the drill bit to one of the holes to widen it to allow the block and wire to pass. Also, the hitch moved slightly up and down when I was finished. I used a large washer in the main bolt to take up the 16th of an inch or so of space that had allowed it to move. I have used the hitch for a bike rack, a hitch hauler that has carried two push lawnmowers and frequently attach a 6x8 trailer loaded with a 46 inch riding lawn mower. Great product.
Speedy Gonzales shipping, gracias!I received the box damaged fearing the hitch was also scratched up & damaged but thank goodness it was not. [online] wanted close to $XX more for this product that I got from etrailer thank you for $XXX. I installed on a 2006 Honda Accord EX 4-door V4, the shims or flat metal with was too large for the holes of the subframe which is stated in many forums being true - why CURT hasn't been corrected is beyond me!? I had to grind the side down on in order for it to slide in the hole of the subframe, I could not lower the muffler easily, so I had to work around it but was successful through trial and error & helps with smaller hands. The torque specs on the subframe is XX ft lb & at the hitch/receiver area was XXX ft lb, they tell you to use a 3/8 ratchet wrench but in order to get that foot pound rating you really need a 1/2"ratchet wrench. The subframe was 11/16 & the bolt over the muffler I had to use a regular wrench and torque it up the best I could to get to 70' lbs. The hardest part was the one above the muffler but everything worked as it should, lined up and torqued fine. I put white reflectors horizontally on the back of the hitch as a nice touch, the reflectors were left over from [online] purchase of a wood mailbox I had installed and never put on the white reflectors. Extremely happy with my purchase and instructions that etrailer provides. Will definitely be recommending etrailer to family friends and acquaintances. Sorry I did not include pictures of the final installation but everybody knows what a trailer hitch looks like
Stephen P.
4/21/2023
Excellent, all is well - thank you so much for an excellently manufactured product. Im rechecking the torque specs after a few tow for safety and thats the reason I returned to get the PDF file to confirm the torque ratings for verification & safety!
This is a great hitch to hook up accessories. I use it for a two bicycle Thule rack and it works perfectly. Can open and access trunk with two bikes attached. It was easy to install...except for re-hanging the rubber muffler mount. My advice...use silicone spray on the rubber mount and the muffler peg and it would've saved so much effort and time.
The hitch that you have sent me has been installed as of 1:30 this morning. The installation was very easy and quick. Thank you for the great service!
I received the package from etrailer yesterday.
Everything was packed well, in a single carton and undamaged.
I prepped this morning to install the hitch and wiring T harness on my 2005 Honda Accord Hybrid (V6, dual muffler, heat shields).
Not including prep (gathering tools, level spot etc) it took a little over 2 hours to complete. As expected (pointed out in videos) the metal bracket did not quite fit through the access hold in the frame.
I found it much easier to file down the bracket than to widen the hole in the frame.
Overall, very very happy.
I went a few hours later and purchased a 5X8 utility trailer and pulled it for about an hour on the highway and in traffic.
No issues.
Robert P.
8/21/2016
Nice. I received an email this morning asking how I like the product after a year. No complaints at all, still works like a champ.
Fit perfectly, arrived quickly, and was a reasonable price. Great service!
Easy to install. Took this from NC to CA and back. Use loctite on the bolts, though.
Fast shipping…Received in a couple of days. Packaged well. Straightforward install. I use this hitch as a mount for a platform-style bicycle rack on my 2007 Honda Accord. Love it…should have done this years ago.
Great customer service when I called. Supper fast shipping.I am very satisfied.
Everything was correct and fit perfectly on 2004 Honda accord. Easy to install, less than 1 hour.Looks good.
Great product, I would recommend friends and colleagues to buy this product
The receiver is well made and I expect it to last a long time. It fit our 2007 Honda Accord SE perfectly. We plan to use it to mount a bike rack and perhaps pull a small sailboat.
I had two issues with the installation that cost me some extra time.
1. The provided measurement from the fore-most hole in the heat shield to the center of the 5/8" hole for the receiver bolt was 4-1/2". The center of the hole in the frame for the mount bolt was actually at 4" back. Once we figured that out, we opened up the hole in the heat shield to the actual size of the frame hole, as this was going to be covered by the receiver anyway.
2. Only one fishing wire was provided with the receiver. Two would have made installation much easier. Working through the heat shield, I was concerned about shoving the bolts back into the frame. We worked around this by fishing and loosely mounting one side. Then we fished the bolt, reinstalled the heat shield, and mounted the second side. We kept the fishing wire on each bolt until it was through the receiver. This approach worked well.
I was able to install the hitch in my driveway using ramps, thanks to the available youtube video the install is very easy. The only issue I had was torquing the carriage bolt to 110 ft-lb. I ended up stopping over to my local Pep Boys and giving the mechanic 5 bucks to do it for me. Worked out great. The hitch itself is pretty nice, I have no complaints thus far, it's a hitch it does what a hitch is supposed to do.
I just finished installing this on my 2003 accord. It took much longer than necessary because the backing washer that is supposed to go in the frame didn't fit into the frame. I had to spend about a half hour grinding the edges down to get them to fit. These parts are clearly not sized properly for this application. In addition the frame bolts could be a few threads longer. It was very difficult to get the nut on without pushing them back into the frame.
In addition getting the pull wire off the first bolt is very difficult and almost ruined it. The really should be two of these provided. Then they could be left on until the heat shield is re installed.
Overall this is a poor set up and not nearly as easy as my other hitch I got from you.
I was very pleased with the trailer hitch,extension, and ball I received. The recommendations were spot on. The only recommendation I have to make was the instructions left a lot to be desired. Please consider adding links to youtube tutorials ( that's what I used) or make tutorial videos yourself. Other. Than that,mi would definitely order from this company again.
The product was exactly what my auto prescribed for (unlike U-haul who ordered the wrong part that delayed my project two weeks), and that was due to your sales rep Vince who was very patient in dealing with a Boomer. Rather than being charged $65 for installation, I decided to install it myself. Rather than the half hour that was predicted, I took two hours because the washer needed to be grinded down in order for it to fit the hole on the frame.Your video tutorials were a great confidence builder..I would not have entertained the idea to do it myself otherwise
I have used it for my bike rack with no problems. Nice clean piece, the install videos were good and helped save money. Need a torque wrench to do it right.
Very well made and a simple installation. I am amazed by the paint quality of this receiver hitch as it seems to be extremely well done. Installation time was approximately 1.5 hours, with the most difficult part taking about 30m, which included dropping the exhaust off the rear three hangers and shifting it out of the way of the frame hole so I could widen it slightly with a file. All in all this was an excellent purchase.
Wow. Out of every aftermarket kit I have ever installed, this was the easiest and a snap to install. Works perfectly and I use it many times throughout the week with my bike rack. Have not pulled anything with it.
The material for this is awesome and not crappy. Installed on a 2007 Honda Accord.
Just installed it tonight. The install video was excellent. I'm sixty plus and still like to do projects and have the satisfaction of doing it my self. The toughest part of the job is removing the upper exhaust hanger, be sure to spray liberally wth wd-40. Also make sure you support exhaust with strap before removing hangers.
You folks know how to do business!
Thank you
Awesome ! Went right on ,no problem! Looks good ,feels good ! This is my second hitch (2 different cars) and both of them are flawless ! I can haul my ATV ..landscaping equipment ...but no I still won't help you MOVE !!!!!
Hitch arrived in 4 days, I used the free shipping option, one end was poking out of the box but no damage to the hitch. Followed the video instructions and was done in 50 min. removing the exhaust was the hardest part. Use lube it really helps.
Pretty painless install, all that was required was to drill a couple of holes in the heat shields. Everything lined up perfectly. Etrailer beat everyone's price and shipped it quickly, thanks!
This hitch arrived 3 days earlier than expected and was pretty easy to install. I have not had an opportunity to use it to tow my trailer yet but I plan to.
The high is solid and it was easy to install. It fitted perfectly on my 2007 Honda Accord sedan, will definitely recommend purchasing from etrailer
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
8/26/2023
The hitch is working like the day I installed it. I’ve used it with a hitch hauler to transport push mowers, a 6x8 trailer and a bike rack. The hitch hasn’t shifted. I really like the way it hides under the rear bumper when you don’t have the drawbar installed. Great product.