bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. 200 lbs TW
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11576
lowest price pledge
Our Price: $200.77
You Save: $86.68
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 28 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos


Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Lowest Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11576 can be ordered online at or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (60)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - C11576

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Uses existing factory hardware
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Installation instructions included
  • Hitch assembled in the USA, bolts overseas


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

11576 Curt Class 1 Trailer Hitch Receiver

Replaces 12176

Installation Details C11576 Installation instructions

This Product Fits The Following Vehicles

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11576

Average Customer Rating:  4.8 out of 5 stars   (60 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

2019 Toyota Avalon

Bought a Curt 1 1/4" hitch and put it on this afternoon, I wanted to compliment for their wonderful customer service. They actually had a knowledgeable fellow (Drew) manning the phone on a Sunday afternoon, he walked me right through the solution to my question. The instructions were a bit wonky IMO but Drew referenced me to a video on their website and it all went on fine.

Toyota Camry

Once again Curt hit the mark on my Camry Hybrid, overall easy install. Hour and a half top for install. Hides nicely under rear end, very solid. Couple of months of weekly use. Makes me happy to know I have a solid well engineered product hanging out back, doing its job at a high-level Thanks Happy Hitcher!

2018 Toyota Camry

The hitch works really great for my bike rack. But the 2021 Camry SE is difficult to attach a hitch. When I put a hitch on my 2018 VW GTI it took no time and was easy.


I am so glad I decided to do this. I am a novice and it took my a little longer to install it but I had no issues. It is very sturdy and stable. This allowed me to install a lockable bike rack for mountain biking trips. I have been using this for 2 months now on 7 or 8 mountain bike outings and this hitch is solid. Great purchase. Well worth it.


Fits our 2021 Camry LE Hybrid perfectly. Had the Receiver installed by a professional. Using for a bike rack.

Toyota Camry

I use this hitch on my 2020 Camry SE Hybrid to hold a platform style bike rack. The installation was a bit challenging without an extra set of hands. However, with the help of a couple of appropriate length 2x4's used as supports, I was able to manage. The grinding of the frame holes to make them large enough to insert the flat nuts was one of the more time consuming steps to the installation process. I used grinding bits in my electric drill and it took forever :(. Once complete, the hitch is very solid and I LOVE how it is nearly completely hidden by the bumper. The only aspect of this hitch that I don't like (which isn't unique to this hitch) is that it is too much work to remove it for the winter and keep it away from the road salt of Wisconsin.

After a year of use, this hitch is still rock solid! It just went through its first salty Wisconsin winter. Only a small portion of the hitch is exposed to the elements and, so far, it isnt rusty.
Craig - 03/01/2022


Had local shop install, it was quick for them. It's been working fantastic! Love how tucked to the car it is, so all you see is the hole for the hitch, have only nicked it a couple of time on some steep garages. Would get another!

Still working great! a little rust and I still nick it on things, but hasnt had any issues that I can think of.
Samuel - 05/15/2022


Hitch fit very well, easy to install. No need to cut the muffler heat shield per directions. Just get a witness mark by pushing heat shield up into place and punch out area where the mounting bolt hits. Only negative input regarding directions is the crude diagram for cutting out the cover panel. Probably could have been a bit better. Great product


Seems pretty solid. There were blobs of something internally [casting deformity or paint or both?] and had to file them down before bike rack could be inserted. Did not come with a cap. Had to buy one separately. A decent product but a little pricey considering I had to pay an additional $xx.xx to have it installed.

Okay. Dont use it much.
Richard - 07/02/2022

Toyota Camry

Took about 2-3 hours with two people. Needed a majority of tools. I have a 21’ Camry le. I took the exhaust off. Used a step bit for the 1” carriage bolt. Used the reverse fish wire for the bolt and plate. Did have to Dremel the bolt holes and elongate them. Did need to cut my exhaust heat shield. Did need to cut a chunk for the hitch post. And cut about 1-2 in off the rear valance for the hitch support under the bumper to not hit. Pretty good setup


No problems, use it for bike rack. Well built unit with good quality.

2020 Toyota Camry

I have a 2020 Toyota Camry XSE. I was taking it and my bike to Florida from the midwest-so I ordered this hitch and the Kuat sherpa 2.0. The hitch arrived FAST. My local mechanic did a great job installing it and the bike made it safely to Florida. Love the hitch and the Kuat!!!


This is a well-designed and well-made product. I especially like that most of the hitch is hidden behind the bumper cover. The included direction sheet is poor. Especially the trim diagrams, which are next to useless. The underbody trim photo is too dark and the white masking tape is confusing. In the video, the minimal trimming that the guy does on this panel does not work on my car. Now that I've done it, I understand the photo, but it didn't help much before.


Very easy to install as long as you follow directions and I would recommend using a step bit to enlarge the holes. Product looks great when attached. Using for a bike rack.

2021 Toyota Camry

Came fast with no problems, installed and using it. Perfect transaction!!

Toyota Camry

Perfect fit to a 2021 Toyota Camry Hybrid. Install instructions were good, I had no problems. Trimming the plastic cover plate at the end of the install was guess work because the instructions could be written better with better pics. Finished install looks great, can barely see hitch. Nice product, thank you


Great people to order from. I hit the right hitch at a reasonable price and good communication from date of order to its arrival.
The hitch fit perfectly and the how to install video was helpful.
Now, I can haul my bike to my favorite riding areas, thank you etrailer!

Still perfect, 1 year later, no issues at all. Still looks new
Bill - 09/01/2021


Fits well. My cousin was able to install it for me.comes with easy instructions and there is a video on their site. Looks factory.

Toyota Camry

This hitch was exactly what I was hoping for, I have a Camry with no interest n pulling trailer but I needed to haul my MT bike to the trail head. I’m no mechanic and I was able to I install it on my own…it had its moments but I overcame them.
Paired with a 1up bike rack it looks slick on a common grocery getter.


Amazing snug fit! I’ve installed plenty of hitches over the years. This one wins for hiding up in the bodywork nicely! Took me a solid 2 plus hours, mainly due to taking my time trimming and deciphering instructions between US and Japan made cars. Instructions could be a bit more clear. US made cars don’t use largest bolts.


Received it with some delay because of covid 19 . Did receive it quickly once e trailer got some in. Very good response by e trailer. Got it installed. Will use to haul bikes to trails.


Fit perfectly

2021 Toyota Camry

I needed a trailer hitch for my 2021 camry hybrid, other sites I was on had incomplete info as to whether the hitch would work on the car. Etrailer's site was clear on what would work took out the guesswork.


Courteous and knowledgeable Representative, fast delivery

great product
rob r - 02/28/2022


that's what I'm talking about.
installation. Thank you.
Product Review:

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Curt Trailer Hitch Installation on 2019 Toyota Camry
    The Curt Trailer Hitch Receiver # C11576 on your 2019 Camry will fit. The double wall on that frame does make it a little tricky to get those bolts and plates into the correct position. I reached out to my tech contact at Curt who said you will need to enlarge the holes as previously stated and he said they reverse fishwire the bolts and blocks into place. Reverse fishwiring is when you put on the backing plate, thread on the bolt, then shove them into the same hole they will need to...
    view full answer...
    Image 1 for
  • Fixing Exhaust Rattle After Installing Curt Hitch on 2019 Toyota Camry
    Hitch rattle isn't a super common issue but there are some easy ways to relieve the noise. The easiest solution is to bend the exhaust hanger up so that the muffler sets further above the hitch. If bending the hanger does not provide a solution, another option is to try and replace the rubber exhaust isolater with a shorter isolater. The shorter isolater will help raise the tailpipe up futher away from the hitch. I have attached a help article that covers these ways to help correct...
    view full answer...
    Image 1 for
  • Will Curt Trailer Hitch Rub Against Exhaust on 2019 Toyota Camry
    We have not heard any complaints or feedback regarding the Curt Trailer Hitch # C11576 rubbing against the exhaust of your 2019 Toyota Camry when installed. This particular hitch is a bit more concealed but both it and the Draw-Tite alternative install in the same manner so both will be in pretty much the same position in relation to the exhaust when mounted. While I don't foresee this as being an issue on your Camry, contact with the exhaust isn't a terribly uncommon occurrence when...
    view full answer...
  • Recommended Trailer Hitch for 2020 Toyota Avalon Hybrid
    For your 2020 Toyota Avalon Hybrid I highly recommend the Curt Trailer Hitch Receiver # C11576, which is confirmed to fit your Hybrid model and features a nice hidden crosstube design that allows only the 1-1/4" receiver to be visible behind the vehicle. This creates a really sleek, OEM-like appearance on your Avalon. I have attached an image of the hitch installed so you can see exactly what I mean. I have included the written installation manual below. All the necessary hardware is...
    view full answer...
    Image 1 for
  • Can the Curt Trailer Hitch Receiver for a 2019 Toyota Camry Be Installed At Home
    Yes, the Curt Trailer Hitch Receiver part # C11576 which is a fit for a 2019 Toyota Camry can be installed by someone at home with little tools or mechanical knowledge. In fact, these hitches are actually based around this premises that someone at home with very little tools or mechanical knowledge will be installing them so the design needs to be as simple as possible. The vehicle does not need to be lifted for installation though if you had a few floor jacks for the rear it might give...
    view full answer...
    Image 1 for
  • Installation of Curt C11576 Class I Hitch on 2020 Toyota Camry Hybrid
    We don't have any recommendations regarding an specific installer in your area, but any trusted auto service or auto body technician should be able to handle the installation without difficulty in 2 hours or less. I've linked to an installation video and the instructions for you.
    view full answer...
  • Will Curt Trailer Hitch Receiver C11576 Fit A 2021 Toyota Camry TRD?
    While the Curt Trailer Hitch Receiver # C11576 you were looking at is confirmed to fit all models of the 2021 Toyota Camry including your 2021 Toyota Camry TRD, you may have to trim the middle section of the lower bumper if it sticks down any further than the standard middle section. Curt did not have any complaints stating trimming was required, and based on the picture you provided it looks like it is pretty close to the same dimensions of the standard middle section, but I am unable...
    view full answer...
    Image 1 for
  • Recommended Trailer Receiver Hitch For A 2021 Toyota Camry LE Hybrid
    For your 2021 Toyota Camry LE Hybrid I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Item # C11576. It is confirmed to fit all models, hybrid and non-hybrid, and has a 2,000lbs GTW and 200lbs TW capacity. This trailer receiver hitch has a bolt on design and a gloss black powder coat finish over a protective base coat that offers superior rust resistance. Tech Tip: Underbody panel, if present, will be removed, trimmed, and reattached. Heat shields will need...
    view full answer...
  • What Hitch do You Recommend for My 1UP USA Quick Rack on My 2022 Toyota Camry?
    For the best route of hitch that is compatible with your 1UP USA Quick Rack with a 1-1/4" shank on your 2022 Toyota Camry, I recommend the Curt Hitch # C11576. This hitch comes with a 200 pound tongue weight and an outer gloss coat over the base powder coat that provides ultimate resistance from rust and corrosion. Given the available specs of the Quick Rack, I unfortunately could not find the shank length of the rack. With that being said, even though we do not have the exact bumper...
    view full answer...
  • Recommended Trailer Hitch With Most Ground Clearance 2022 Toyota Avalon
    The only available hitch receiver for a 2022 Toyota Avalon is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11576. It is a concealed cross-tube design and will drop below the rear bumper 2-1/4 inches.
    view full answer...
  • Installation and Cutting Requirements for a Hitch Receiver on a 2022 Toyota Camry
    I took a look at the installation video and instructions for the Curt Trailer Hitch Receiver item # C11576. It does look like you are going to have to do some trimming of the under panel to accommodate the receiver portion of the hitch and the lip for the main beam. I have linked a video of a different hitch being installed on a single exhaust Camry. The panel does not extend to where the exhaust is so the installation on your 2022 Toyota Camry will be easier and you will only have to trim...
    view full answer...
    Image 1 for
  • Trailer Hitch that Fits 2022 Toyota Camry Hybrid
    We have hitches that fit your 2022 Toyota Camry Hybrid like with the Curt part # C11576 but since it's a lighter duty vehicle we only have the smaller 1-1/4 inch hitch size as the 2 inch hitch size is generally only seen on higher capacity vehicles like trucks and SUVs. I really like this hitch for your vehicle as it has a mostly hidden look since only the hitch opening hangs below the rear bumper.
    view full answer...
  • Which Trailer Hitch is Most Hidden on a 2018 Toyota Camry
    For your 2018 Toyota Camry, it appears that the Curt Trailer Hitch Receiver part # C11576 will be the least visible which you can also see for yourself from the attached photo. Unfortunately, we have not yet installed the Curt Trailer Hitch Receiver part # C11576 or the Draw-Tite Trailer Hitch Receiver part # 36643 so I do not have any ground clearance measurements for you. These measurements are also going to vary by vehicle due to different tire sizes and cargo which is why the manufacturer...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2019 Toyota Camry
    There was a big enough change to the Toyota Camry in 2018 that the hitch manufacturers had to come up with a new fit. So the hitch from your 2015 Camry would not transfer to the 2019 and you'd need a new hitch. For that the Draw Tite hitch part # 36643 is a confirmed fit and would work well. I really like this hitch over the others because it does not require a stabilizer strap when carrying a bike rack like the similar Curt hitch # C11576 does. It also shows a shorter install time length too.
    view full answer...
  • Trailer Hitch Recommendation for 2018 Toyota Camry for Carrying Bike Rack
    The trailer hitch I recommend for your 2018 Camry is the Draw Tite part # 36643 because unlike the Curt hitch part # C11576 that also fits your vehicle it does not require a stabilizer strap when carrying a non-supported load like a bike rack. The picture I attached shows the hitch installed on a 2018 Camry just like yours with a Thule T2 bike rack TH9035XTS installed in the hitch.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2018 Toyota Camry Hybrid
    For your 2018 Toyota Camry Hybrid the Curt Class I Receiver Hitch # C11576 will work perfectly and it is actually the only hitch available that is confirmed to fit the Hybrid model of your vehicle. This custom hitch features a tongue weight capacity of 200 pounds and its durable welded powder coated steel construction will hold up great over time. I have attached the written installation instructions that you can check out as well. One important thing to keep in mind with this particular...
    view full answer...
  • Will Installing A Hitch On The Toyota Camry SE Affect Lower Body Molding
    We currently have two trailer hitch receiver options for your 2018 Toyota Camry SE which are the Curt Trailer Hitch Receiver part # C11576 and the Draw-Tite Trailer Hitch Receiver part # 36643. Both of them install in a similar way and the difficulty is about the same. When installing the # 36643 on your 2018 Toyota Camry, you need to trim the underbody appearance panel to a 9" x 7" area. Also the heat shield must have a 10" by 12" area trimmed on it. When installing # C11576 you will...
    view full answer...
    Image 1 for Image 2 for
  • 2018 Toyota Camry with Curt Trailer Hitch Receiver Ground Clearance
    The Curt Trailer Hitch Receiver - Class I # C11576 is a confirmed fit for your 2018 Toyota Camry. We haven't had the chance to install this hitch yet for photos or a video, but I've attached a photo of this hitch on a 2018 Toyota Camry to assist. We also haven't had the chance to measure ground clearance due to this, but based on the photo and the 16-19 inch wheels available on the 2018 Camry, it appears you will have 12 inches of ground clearance or more. It is less visual than the...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2018 Toyota Camry Hybrid
    For a trailer hitch that is a confirmed fit for a 2018 Toyota Camry Hybrid you'd want the Draw Tite part # 36643 or the Curt hitch part # C11576 that you referenced as both are a fit.
    view full answer...
  • Recommended Trailer Hitch With Most Ground Clearance for a 2020 Toyota Avalon
    The trailer hitch that offers the most ground clearance for a 2020 Toyota Avalon is the Curt Trailer Hitch Receiver part # C11576. The receiver tube on the Curt hitch is going to sit right up under the rear bumper which you can see in the attached photo. Furthermore, the Curt hitch has a hidden design so it will also look the best while mounted on the rear of the vehicle. The Draw-Tite Trailer Hitch Receiver part # 36643 on the other hand does not have a hidden design so it will be much...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2018 Toyota Camry
    The best hitch for your needs will depend on what you're using the hitch for and how visible you'd care for it to be. We have the Curt Class I, part # C11576 and the Draw-Tite Class II, part # 36643 both of which fit a 2018 Toyota Camry. It appears 2018 was a split model year for the Camry, but that makes no difference as far as hitch fits go. Both the XV70 and the XV50 use the same hitches. If you were planning on using the hitch for carrying bikes, and only needed to carry 2, the Curt...
    view full answer...
    Image 1 for
  • Trailer Hitch Receiver Compatibility with 2018 Toyota Camry
    For your 2018 Toyota Camry, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11576 is the only confirmed fit. None of the models you listed will work with your vehicle. If you want a slightly stronger hitch for greater compatibility with accessories, you can use the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36643 instead. The Class II hitches have less restrictions but there is more of a visual crossbar to this hitch so slightly reduced ground...
    view full answer...
  • Hitch Solution for 2020 Toyota Camry SE that holds 1Up USA Bike Rack 2
    I do have a solution for you, however there isn't a 2" receiver available for your Toyota Camry. The Camry just does not have the capacity to match what a 2" receiver offers. You can use the Curt # C11576 1-1/4" Class-I hitch and add a # HTAD 1-1/4" to 2" Hitch Adapter that your bike rack can attach to. I have attached a link to these items. I prefer the Curt hitch as it is mostly hidden under the bumper when not in use. I have attached a picture to show you that. It is important...
    view full answer...
    Image 1 for
  • Availability of Mostly Hidden Hitch that Fits 2020 Toyota Camry
    Yes we do offer the Curt hitch part # C11576 that you referenced which fits your 2020 Toyota Camry and has a mostly hidden appearance since only the hitch opening hangs below the rear bumper. The price is available at the product link down below as well. I also attached an install video as well.
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Thomas T
Video by:
Thomas T
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Eric H
Updated by:
Eric H
Employee Conner L
Test Fit:
Conner L
Employee Ryan G
Test Fit:
Ryan G
Employee Kristina F
Written by:
Kristina F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.