bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

lowest price pledge
Retail:$227.78
Our Price: $163.13
You Save: $64.65
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 40 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13105 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (825)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • CURT
  • Visible Cross Tube
  • 350 lbs TW
  • 5000 lbs WD GTW
  • Custom Fit Hitch
  • 500 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13105 Curt Class 3 Trailer Hitch Receiver

Replaces 13256

Item # C13105

Installation Details C13105 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13105

Average Customer Rating:  4.8 out of 5 stars   (825 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:
2018 Toyota Sienna

I installed this trailer hitch on my 2018 Toyota Sienna. It is very well-built, and fit perfectly. Customer service was very responsive when I had some questions, and responded right away, both by phone and email. The instructions were very good, but could benefit from additional information regarding cutting the car’s rear trim panel. In addition to the cut that needs to be made for the trailer hitch bolting plate to go through on the driver’s side , it also needs to be cut around the main bar / receiver area. Instead of cutting a big slot for the main bar, I cut out around the receiver plates, and put drain holes in the ends that would otherwise collect water. One shortcut that I found was that I was able to move the exhaust out of the way far enough by just removing the rearmost hanger, rather than removing the two hangers as shown in the video.


Comments
Every time that I have used this hitch, it has performed flawlessly. No complaints after a year of use. It is a well-made product.
Chuck - 07/30/2019


by:
2011 Toyota Sienna

2012 Sienna LE FWD. Watch the 2011 installation video before you start. This 13105 hitch tucks in even prettier than I expected, and now my brother is jealous. Note I made the cutout in the underbody panel narrower, starting 1.75 inches from the hole (see photo), for a closer fit, and there is still room for torque wrench. I also cut a slit out to the front edge, so I could slip it on with the hitch in place, and for better access to my air hoses inside the left fender. I decided to add Airlift after reading reviews, since on trips I carry a maximum load. Installed single-handed, raised on jack stands.


Comments
Hi Mike,I was ready to purchase a 2014 Sienna until I found out Toyota would not put a hitch on this vehicle because of low ground clearance. I will be carrying heavy loads and have heard you bottom out on the hitch when going into parking lots etc. At times when the van is fully loaded I will also have a travel trailer attached which adds 400 lbs. to the tongue weight. Even with this hitch it may not be the right van for my needs. Do you have experience that can help me?Can you tell me what type of Airlift assist you put on and if you ever have trouble bottoming out on your hitch.How does the Airlift affect the ride both when heavily loaded and empty?Thank you for your time and have a great Labor Day weekend.
-- comment by: Terry B - 08/31/2014


by:
2010 Toyota Sienna

True bolt on for a 2010 Toyota Sienna.

The only issue I encountered was that the driver side threading was really dirty and needed to be blasted with some PB blaster and wire brush cleaned. But that doesn't really have to do with the hitch itself. The passenger side must have been cleaner because the exhaust covered up that side a little bit.

Once everything was cleaned, the bolts were torqued to 79 lb/ft and I was good to go.

Thanks!


Comments
No problems!
Josh - 07/23/2014


by:

Thank goodness my brother-in-law helped me install this. Because he's really good with cars. I had all the right tools but it was my first time doing a trailer hitch.


Comments
Just fine. All good.
Tim - 05/12/2022


by:
Toyota Sienna

Perfect fit and easy installation in my Sienna. No complaints. I suggest however that you consider ride height and hitch clearance and whether with a load (such as my 6-bike rack) and full van you may need air bags to prevent dragging through gutters and over speed bumps. Not the hitch’s fault but something to consider when you add a hitch




by:
2012 Toyota Sienna

Hitch is great and the video is a great tool for installing. I'm not mechanical so without the video I would have been stuck. A few items of advice for installers:
1. Make sure you have an extension for your ratchet like the video shows. I didn't have that and it made it difficult around the exhaust. The video that is on the Curt webside recommends moving the exhaust out of the way for the install. If you don't have an extended ratchet, that is what I'd do (if you have the tool to do that). We made it work, but I needed to use my wife's smaller hands to get the bolts started on that side.
2. The instructions says that you don't need to raise the vehicle. I didn't raise ours, but in retrospect, I would have raised it up or at least put a jack under it so I could lay on a roller or something. I'm an accountant so manual labor laying on concrete makes me sore - and it gets pretty tight under there :)
3. Our van was very dirty underneath so I got a lot of dirt in my eyes when taking off the plastic cover - might be worth wearing some glasses when you do it.
4. my only complaint is that the hitch is a little lower to the ground than I'd like - I think it will be grounding out on some driveways. that really isn't the hitch's fault though - it is fitting pretty snug underneath the van, but the van just sits pretty low to start with.
I have a picture of my 5 year old helping me - yes, he is still alive under the van. I didn't intend to attach that but can't figure out how to remove :)




by:

Hello Matthew, as I ordered the hitch, brackets and wiring hookup assembly several weeks ago, I only installed it just recently. Hitch was well made, all welds clean, no weld splash, etc, and painted excellent. Plug in light wiring, easy to hook up and brackets worked like they should with no difficulty. Great kit and reasonably priced. Sets real low on the back of my Toyota Sienna (no fault of the product) so I bought a adjustable ball hitch so I can level for what ever trailer or load I pull. Thanks for guiding me into purchasing this American made product instead of the Chinese one which was not available at the time. Not sure you read these notes personally, but if you do, have a Happy Holiday Season under the existing circumstances.


Comments
hope you had a good holiday yesterday. Regarding the hitch on my 2008 Toyota Sienna, its everything I needed and has worked out great. As someone mentioned, because it sets so low no fault of the hitch I have drug going in and out of driveways and curbs, etc. The hitch, being well made, has taken that all with no damage. As to installation, my son and I slipped it on by ping the tail pipe from rear hanger and letting it just droop there, giving us room to slide the hitch right in over the exhaust pipe to bolt it to frame to the factory predrilled holes which we had already run a metric thread tap into. Wiring harness matched up perfectly to the existing light harness. Everything turned out like it couldve been factory installed. I guess Im kinda bragging, but my son and I are both good backyard mechanics. If, in the future, I need another hitch, I will be getting it from same place I ordered this one.
Burton - 12/06/2021


by:
2006 Toyota Sienna

Hitch Installation 2006 Toyota Sienna

How
I Did It:
I had no plastic bottom splash cover on this van to work around.
The van was not jacked up.. I simply hooked the passenger side of the hitch over the exhaust pipe (to support the hitch).

Using a block of wood on a jack I raised the (center receiver) of the hitch to draw the driver side up into the mounting position.

A 8-in heavy shank Phillips screwdriver and a tapered piece of wood helped to 'align' the (3) holes, and loosely set the driver side (bolts with washers), into place.

Moving to the passenger side.. I used a 2nd jack (with a piece of 2x4x6 (on the jack) placed between the body and exhaust to rise the hitch up and away form the tail pipe, and into mounting position.
Alternating between center jack supporting the "receiver", and passenger side jack (raising the right Hitch side), I kept the hitch level as the hitch was snugged into mounting position.

Again, using the tapered wood and screwdriver as an alinement set, I screwed in 2 of the 3 right side bolts. The third bolt, refused to 'catch' and failed to screw into place even though alinement appeared good, and the bold had been tested as screwing into the hole cleanly, prior to raising the hitch....

My solution to this was to use a 'bolt & nut of the proper size that I had on hand', identical to the supplied bolts but mine happened to be shorter, but with good threads. I placed a nut on this bolt.

I ground a leading cone shape taper (grinding about 4-threads away to make the taper), on the end of this new "alignment bolt". I oiled the treads, and then removed the nut to 'self-clean' the threads out to it's new end taper. I did not cut a thread-cutting chip-relief 'notch' in this bolt end, as I knew the van threads were good as pretested.
Using this modified bolt I was able to now 'catch' the van hole's lead-thread, and cinch-up this modified aligning bold tightly.

Or,... if you don't have an extra nut and bolt laying around, you can use one of the supplied hitch bolts, a grinder and a small file to touch-up the lead thread. There is plenty of length on a new Hitch bolt to work with.
(Be sure you have cleaned & pretested all 6 of the Van's bolt-hole threads with the supplied bolts prior to your install efforts!)

I also found it handy to have another small block of 2x4 to pry the exhaust pipe out of the way of your hand/tools, when using the socket set on the right side bolt holes.

With my modified bolt tight and in place, I then tightened the 2 installed right-side bolts.. remove the 'modifier aligning bold' and installed the 3-rd and final hitch bolt with it's washer.

Time To Tighten All the Bolts Down:
A point about torque on this Hitch/bolt install.
Though the instructions say to use a torque wrench, it seemed rare for anyone in comments/Product Review, to actually mention "using" a torque wrench with their installs.

Since the bolts are to be tightened to almost 80ft/lb this is ALLOT of force.. and even with the torque wrench it seems you will break the bolts, until you hear the wrench's refreshing STOP 'click'.

For those just 'guessing' as they use a beaker bar, or just grunting the bolts into place, I imagine allot of trailers are being pulled at 60mph+, with essentially loose bolts, or at the least, under-tightened/under torqued hitch bolts.
Hmm, overloaded trailer, over speed pulling, and under tightened bolts.... Sounds like fun!

Seriously, try very hard to get your hands on a proper torque wrench and be surprised at the amount of oomph it takes to properly tighten these bolts.

Anyway, the Hitch? Great bumper-cover hugging design.
Good paint-job and pretty "gold colored" bolt and washer set.
The instructions are clear.

Plastic Problems:
Some who have it installed, have goofed and cut the wrong side for the rear plastic underside splash panel. Just mark BOTH sides of the same lift side, so you don't get confused, or cut it, installed, and in place, as some have done with a utility-knife or tin snips. (Consider also a soldering-iron tip and steady hand).

Matching It All Together:
I also found that the CURT ball (one with a 2-in body rise) brought my ball-mount (it's a 1-in rise) and ball combo up to an acceptable (3-in rise), and level, to within 1/2~3/4-in connected to the trailer.

Final Thought:
I'm all for advertizing but not all over the van, so I pulled the stick-on labels off the hitch. It looks cleaner for me. Sorry eTrailer!
If someone asks, I'll tell e'm I got it from you. :-)

The takeaway? This is a good company to buy from... Thanks!











by:
2014 Toyota Sienna

Great hitch, fairly easy to install. The only issue I had was I didn’t slide the bracket over the exhaust isolator bracket before I stated the rear bolts. Had to undo it and start over. But after that, very easy to install.


Comments
Still working great! Using it in conjunction with a weight distribution hitch system and it is working flawlessly!
Roy M - 06/29/2020


by:
2015 Toyota Sienna

-The Curt C13105 hitch arrived quickly and fit well. The 2015 Sienna LE AWD has a long DROPPED RIDGE in the plastic underbody guard. The dropped ridge runs parallel to the (round) hitch crossbar nearly it's entire length.
-The measurements given to trim the driver's side for the hitch plate were perfect. There was mention of "some models need additional trimming" (and a photo that I did not find useful) - the 2015 Sienna tray needed additional trimming.
-So, I mounted the hitch and let it "pivot" from the front-most bolt on each side (leaving the rear 2 out). A floor jack is handy, as recommended when doing this solo. I used the jack to lift the rack up against the underbody guard and trace where to trim. It was easy to trim just around the receiver tube and gusset plate. The cross-bar traps and "sandwiches" underbody guard nicely if you do not cut out the whole dropped ridge. I chose to do this, and it's snug and secure with only slight distortion of the guard, and I believe trimming out the whole ridge would leave floppy, unsupported edges. It is important to secure the guard with it's fasteners first before using the floor jack to "squeeze" the rack up into it's final location and assembling the final rear bolts.

Oh, and the CURT box makes a great, clean, slightly cushioned surface for laying on if you're doing this at home in the garage. Much better than a mechanic's creeper for a task like this.

Also, I took a few minutes to chase the Sienna weld-nuts with a M12x1.25 tap. The bolts were then easy to start by hand.




by: 06/11/2021
2014 Toyota Sienna

The Hitch looks amazing installed and seems very steady. Will use it for a bike rack. Will update later.




by:

I was amazed how easy this was for my man to install. Just raising the Sienna rear tires by a couple inches by rolling up the back end of the van into the garage, was plenty for my man to get under there and install the hitch, with the help of my dad who hand-spun the bolts in on the one side. Definitely use a torque wrench -- tighten to 79 lb-ft the instructions said. Looks fantastic.




by:
2010 Toyota Sienna

I feel the hitch bar was of good solid material and well made. When I first received the hitch it did not fit my 2010 Sienna. So with the quick and friendly guidance from Will at etrailer.com, I was able to open the hitch mounting arms and fit it to my Van. The mounting arms are flexible by design and can bend during shipment. I would definitely recommend this product to the next customer.




by:
2008 Toyota Sienna

Hitch appears to be solidly built and was a breeze to install, especially after watching the installation video.


Comments
After a year it still is working great as one would expect.
David - 05/25/2021


by:
2015 Toyota Sienna

I installed the hitch on a 2004 Sienna. Very happy that Toyota pre-fits bolt holes. My wife bought a newer 2015 Sienna and when I'm done beating up her old van I can move the hitch to the new one! Only issue on the van is that the hitch sits pretty low to the street (I flipped the ball on the mount to gain some height). But it works fine and was easy to install.
It was a great purchase, thanks, Paul

Note: cleanout and test your bolt holes before wrestling with the hitch. Instructions said to remove the tailpipe holder, I was able to just wiggle the tailpipe out of the way.


Comments
Thanks for reaching out. Everything is fine, it was a great purchase. Im very satisfied. I thought my original review was clear and complimentary, I dont feel the need to say it again. If you want to post this under my name go ahead.
Paul - 01/23/2019


by:
2015 Toyota Sienna

Excellent service, Alexis L, took my call and in minutes had the Curt Trailer Hitch Receiver that does fit my Car 2004 Sienna along with the Harness C55580. I watched the etrailer.com video helped get it done perfectly.

One thing I noticed on the 2015 Sienna video and not on the 2004 Sienna Video, is there is a small rubber gasket in the trunk of the 2004 Sienna you can run the hitch wire through. Lucky there is no plastic cover underneath I had to deal with only the exhaust rubber connector was removed for installation.

Lastly if did it again, spray and wire brush the threads on the car a lot.

The packaging by Mark R, great, just a few box dings but other then that came in great shape all the way from Wentzville, MO, as they say in MO they sure did Show ME !!!

thanks everyone.


Comments
The receiver is mainly used with bike rack, both great product. Bike rack matches up perfectly with hitch.
James - 09/11/2021


by:

The hitch came on time and was easy to install. It took 45 minutes to install on our Sienna. Tomorrow we will load the whole family and both my bikes up for a week in the mountains. I am also looking forward to being able to take all 5 of us to my races now. With the bikes and triathlon gear in the van things could get a bit tight. With the hitch on the van and the bikes outside everyone will be more comfortable.




by:
2010 Toyota Sienna

Customer support was great. The biggest issue was cleaning out the bolt holes, which took about 45 minutes. Having the right tools is really key. Once the bolt hole was clear, took about 15 minutes for the remainder of the install. Came out great. Have not hooked up the bike rack but don't anticipate any problems.


Comments
Product working great. No issues.
Ryan R - 07/19/2015


by:

If I had known how easy it was going to be to install this hitch I would have done it years ago! Instructions and videos were amazingly helpful. The fit was perfect! I did have some rust on the threaded holes under the van and ended up buying a Chasing Tap to clean up the threads. Hitch has been great. Mostly we use it to mount a bike rack and it is very sturdy. It occasionally hits the pavement when going up a steep driveway, but less than I expected, since it is quite close to the bumper. I am so glad I installed the Hitch, I have been recommending this product to others


Comments
still Working great. Use it all the time for Bike Rack. Have never actually pulled a trailer.
Scott H - 08/04/2021


by:
2012 Toyota Sienna

Super solid hitch receiver, but I bottom out going in and out of my driveway whenever I'm towing our trailer (even with Airlift airbags installed).
The hitch receiver even bottoms out without anything installed in it from time to time depending on driveway.
If I had to do it again, I'd get one of the concealed receivers. I hadn't seen them when I ordered mine, but wish I had.
This hitch receiver is totally fine, though. We went on a two week road trip with our trailer this summer with no issues at all from the hitch - other than bottoming out!


Comments
This hitch offers one of the highest ground clearances currently available for the Sienna. There are a number of vehicles that have trailer hitch options that offer a concealed receiver design, such as hitches designed by Stealth Hitches, but at this time there are not hitches like that for the Sienna.
-- Etrailer Expert Victoria B - 01/06/2020
One star. If you have a gen3 sienna, do not get this hitch. I couldnt take it anymore. Anyone looking at this hitch receiver should look at the Curt C13343 receiver instead. I ended up selling my C13105 hitch receiver and getting the Curt C13343 after continuous disappointment with the C13105 bottoming out. The C13343 hitch receiver is not only totally concealed on the sides, but I gained over 1 of clearance on the receiver tube, and its 1 inch further back on the vehicle - which helps with bikes on bike rack not hitting window. Im also a bit disappointed with the etrailer expert comment on my initial review. Based on the dates on reviews of the C13343, it was completely available at the time of my first review of the C13105.
Dan G - 12/31/2020


by:
2007 Toyota Sienna

Excellent product. Installed easily with no vehicle modifications on the 2007 Sienna van. It was a simple bolt on installation. I'm glad the instructions specified the torque settings (79 ft. lbs.) because I would have never known to snug them that tight. It seems that the cupped washers had to be compressed to serve as lock washers. That seemed like a lot of torque. I was afraid that the bolts were going to shear, but they did not. Once the washers got compressed the bolts tightened up to recommended torque.


Comments
How did you attach the trailer wiring harness to the hitch? I did not see an attachment for it in the pictures. Thank you.
-- comment by: Josh - 03/03/2015



by:
Toyota Sienna

Sorry to say, I've wasted my money ordering from ETrailer.com, I just found out if you don't open the box when you first get the product to verify it's the right hitch, then you're stuck with it. In my case I didn't have the means to install it right away and passed the 5 day contact window, the hard part with hitches is they all look about the same and the issue didn't become apparent until i was in the act of installing the hitch. So now, not only am i stuck with a useless hitch for a different van which I won't be able to resell for near what I paid, but my van has a hole in the bottom of it because I was dumb enough to trust that etrailer would actually send me the product I ordered. Needless to say this is the last time I'll be doing business with them. Anyone out there need a hitch to a Honda Odyssey? I have a Toyota Sienna so I don't need it, but's it's brand new out of box :(, see photo below.




by:

Super easy to install!




by:
2013 Toyota Sienna

Installed on a 2013 Toyota Sienna. It was easier than I expected. Overall, the hitch is great. Note of warning for any mini-van owners; the clearance on most mini-vans is already relatively low. This will of course lower it a bit more resulting in scraping on the driveway entry and other high spots. Not a huge deal but worth knowing ahead of time




by:
2018 Toyota Sienna

Receiver works, however on my wife's 2018 Sienna Limited it hangs lower and when pulling into or exiting a drive if you are not careful it scrapes.



25
825
Show More Reviews

See what our Experts say about this CURT Trailer Hitch



  • Recommended Trailer Hitch for 2015 Toyota Sienna XLE
    For your 2015 Toyota Sienna XLE, I recommend the Curt Class III Round Tube Receiver Hitch # C13105. This Class III hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. The installation process for this particular hitch is the easiest between all the model hitches available for your Sienna. It will provide you with a 2 inch receiver opening and has a 350 pound tongue weight capacity along with a 3,500 pound towing weight capacity. I...
    view full answer...
  • How to Correct for Hitch Installation Hardware That Appears to Be Wrong Size
    When installing a hitch like # C13105 on a vehicle that is even just a few years old, or certainly on your 2004 Sienna, it can often seem that the included hardware is way too big for the holes in the vehicle frame. This happens due to corrosion and trapped foreign material building up in the threads of the weld nuts in the frame rails. It will absolutely appear that the hardware is too big but in fact you just need to clean out those weld nuts. Please refer to the linked article which...
    view full answer...
  • Can't Thread in Trailer Hitch Bolts on a 2009 Toyota Sienna
    It sounds like you have corrosion compacted in the weldnuts on your 2009 Toyota Sienna. All you can do is spray the lubricant, let it sit from about 15 minutes, and then go at the weldnuts with a wire brush. Do this repeatedly. If that doesn't help you will likely have to use a thread tapper. An auto parts store can usually loan out a tap and die set. Just make sure that the set has the right M12 size and thread pattern to match the bolts. If you haven't used a thread tapper before then...
    view full answer...
  • Cleaning Out Weldnuts to Install a Trailer Hitch on a 2002 Toyota Highlander
    Since tapping new threads can result in threads that are not cut straight I recommend taking some steps to clean out the weldnut on your 2002 Toyota Highlander before attempting to tap new threads. What you can do is use some spray lubricant like WD40 or PB Blaster and liberally spray into the affected hole. Let it soak for about 15 minutes and then go at it with a wire brush, like a battery terminal cleaner. Repeat this process until you can thread the bolt all the way in. I have included...
    view full answer...
  • Fit of Thule 964 Revolver and Curt Class III # 13105 Trailer Hitch on 2015 Toyota Sienna
    When we installed the Curt Class III hitch # C13105 on a 2015 Toyota Sienna, we found that the distance from the hitch pin hole to the furthest rearward point of the rear bumper is 4-1/4 inches. This means that the bike rack you choose need so have a shank whose hitch pin hole to closest upright portion of the rack is longer than 4-1/2 inches. The discontinued Thule Revolver has a hitch pin hole to closest portion of the rack measurement of 7-1/2 inches, which means the rack will fit just...
    view full answer...
  • Trailer Hitch Fit for 2016 Toyota Sienna
    The hitches that fit a 2016 Toyota Sienna like the Curt part # C13105 have been a fit for the Sienna since 2004. This hitch so far has been confirmed as a fit up to the 2017 year. That's a pretty long time. That means it most likely would carry over since Toyota doesn't change the Sienna much. But we can't tell the future, so that's just an educated guess.
    view full answer...
  • How To Lower The Exhaust Pipes For A Trailer Hitch Install On A 2013 Toyota Sienna
    In order to install the Curt Trailer Hitch Receiver part # C13105 on your 2013 Toyota Sienna, you will first need to lower the exhaust pipes from the rear of the vehicle. To do this, you will need a can of spray lubricant such as WD40 or PB Blaster in addition to either a large pry bar or exhaust hanger removal tool. The rear exhaust pipes are attached to the frame by a metal exhaust hanger and a rubber isolator. The isolators are located underneath the vehicle just behind the rear mud...
    view full answer...
    Image 1 for
  • Trimming the Appearance Panel when Installing Curt # C13105 on a 2017 Toyota Sienna
    I added a picture of the drawing from the instructions. If you click on it it will enlarge the picture so that you can better see where the measurements need to be taken. An installation video of the Curt Trailer Hitch # C13105 being installed on a 2015 Toyota Sienna has also been linked for you to check out. This process will be identical to your installation. If you jump to the 7:15 mark you can see our installation team member cut the fascia and then install the trailer hitch. The fascia...
    view full answer...
    Image 1 for
  • How to Prevent Exhaust Rattle After Trailer Hitch Install on a 2006 Toyota Sienna
    Yes, what you are going to want to do is place a large pry bar between the hitch/exhaust hangers and bend them slightly just enough to prevent the exhaust from contacting the hitch. This is rather common as the exhaust placement from the factory can vary ever so slightly. If you need a more in depth explanation then we do have a help article which I have attached for you on this very same procedure. Please let me know if you have any other questions.
    view full answer...
  • What Size Bolts are Used to Install Hitch in a 2015 Toyota Sienna
    The Curt hitch part # C13105 which is a fit for your 2015 Toyota Sienna comes with bolts that are size M12-1.25x40. I attached an install video for this hitch for you to check out as well.
    view full answer...
    Image 1 for
  • How To Order Replacement Hardware for Curt Trailer Hitch
    We sure do have the mounting hardware for the Curt Trailer Hitch Receiver, part # C13105. If you visit our website and enter RHK in the search box, it will direct you to a page where you can enter the manufacturer and the model number of the hitch you need the hardware for. then just enter the quantity and you can place the order.
    view full answer...
  • Tap Size One Size Bigger than M12 - 1.25 for Hitch Install with Stripped Nut
    I would retap the threads with the next size up. Which from my research would be M12-1.5. If you are still unsure you can take the bolt you have with you to a hardware store, tell them you are in need of a tap that is the next size up, and they will set you up.
    view full answer...
  • How to Stop Exhaust Pipe of Toyota Sienna From Rattling Against Trailer Hitch
    What you describe is not an unusual occurrence that has some easy fixes, as you can see by clicking on the help article links I've provided for you. When a hitch is installed, its location is fixed, because it's bolted to the vehicle. Exhaust systems, however use flexible rubber isolators or dampeners that mean the exact location of the exhaust can vary slightly from vehicle to vehicle. This can sometimes lead to the exhaust rattling against the hitch with varying degrees of severity....
    view full answer...
  • Does the Rear Appearance Panel of a 2014 Toyota Sienna Get Trimmed When Curt Hitch is Installed
    The underbody panel of your 2014 Toyota Sienna will need to get trimmed to install the Curt Hitch part # C13105 that you referenced. If you check out the installation instructions and the install video I attached you will see more info on how it gets trimmed. Leaving the panel off would be an option, it wouldn't cause any corrosion or have any undesired effect as this is just an appearance panel.
    view full answer...
    Image 1 for
  • Is There Lower Panel Trimming Required to Install Hitch on a 2016 Toyota Sienna
    For the Curt hitch part # C13105 that you referenced is a fit for your 2016 Toyota Sienna. There is actually two different trim diagrams that can be used and in the videos you referenced one uses diagram one and the other uses diagram two.
    view full answer...
    Image 1 for
  • Which Trailer Hitch Receivers Are Compatible with the 2017 Toyota Sienna AWD
    Yes, the trailer hitch receivers for your 2017 Toyota Sienna, like the Curt Trailer Hitch Receiver # C13105, are compatible with the All Wheel Drive models.
    view full answer...
  • Exhaust Pipe of 2006 Toyota Sienna is Rattling Against Hitch
    The Curt # C13105 is indeed a fit for your Sienna. Here's how the exhaust can rattle against the hitch, even if the correct hitch has been installed. The exhaust system at the rear of the car is attached to the vehicle using rubber isolators and easily bendable exhaust hangers. Because of this, the actual position of the exhaust system can vary a bit from vehicle to vehicle. When the hitch is installed, its position will not vary from vehicle to vehicle. The large tolerances in the exhaust...
    view full answer...
  • Trailer Hitch for 2014 Toyota Sienna
    According to my Curt representative, the discontinued # 13256 was a fit for 2004-2010 second-generation Sienna models, but it will not fit the 2014 model. The # C13105 you referenced is a fit for your 2014 Sienna. If you will be towing with your Sienna, you might also need the following: Trailer Wiring Harness, part # 118498 Ball Mount, part # 2753 2 Inch Trailer Ball, part # 63845 1-7/8 Inch Trailer Ball, part # 19261 I have linked you to the instructions and installation videos for...
    view full answer...
  • Torque Specs for the Installation Hardware for the Curt Hitch part # C13105
    I attached a set of the installation instructions that has the torque figures listed for all the installation hardware. I also attached an install video for you to check out.
    view full answer...
  • Will Installing Trailer Hitch # C13105 on 2011 Toyota Sienna Void the Vehicle Warranty
    The Curt 2-Inch Class III Trailer Hitch # C13105 is indeed a correct fit for your 2011 Toyota Sienna. For your reference I have linked an installation video and the written instructions. Many of our customers ask, Will your product void my vehicles manufacturer’s warranty? While the answer is straightforward from a legal standpoint, it’s important to educate our customers (and all after-market consumers) on some industry realities and offer some common sense precautions to minimize your...
    view full answer...
  • Is There a Minimum Hitch Receiver-to-Ground Height Clearance Requirement for Trailer Hitches
    I am not aware of any legally mandated minimum ground clearance requirement for trailer hitch receivers in any states and my online research did not reveal any such laws. However, I did find on an internet forum for Sienna owners posts related to your exact concern: too little hitch receiver-to-ground clearance. This vehicle simply sits quite low to the ground. Typically the various hitch receivers offered by the major manufacturers will tend to be of fairly similar proportions, which...
    view full answer...
  • Can I Use A Hitch Extender On A 2007 Toyota Sienna XLE
    On your 2007 Toyota Sienna, if you are going to use a hitch extender, you do need to know that it will reduce the overall weight capacity of the lowest rated item in your towing system by 50 per cent including your vehicle. You will need to check your owners manual for the maximum towing capacity of your vehicle. On your Curt Class III Trailer Hitch Receiver, # C13105, it has a maximum towing capacity of 3,500 lbs. and a maximum tongue weight of 350 lbs. If you use a hitch extender...
    view full answer...
  • Will the CURT Trailer Hitch, # 13256 Transfer from a 2004 Toyota Sienna to a 2011
    Yes, if you have the CURT Trailer Hitch, # C13105, for the Toyota Sienna, it will fit on your 2011 model van. If the hitch on your 2004 van is an OEM installed hitch then I have no way of knowing if the hitch will install properly or if the installation would be safe on a newer model of the Sienna minivan.
    view full answer...
  • Fit of CURT Trailer Hitch Part # 13256 on 2011 Toyota Sienna SE
    I have spoken with one of our friends at CURT Manufacturing, who assured me that the CURT Class III Receiver Hitch, part # 13256 will fit all models of the 2011 Toyota Sienna, including the SE model. The different bumper on the SE should not hinder the installation. I have provided a link below to the installation instructions for you to review. Also linked is an FAQ on trailer hitch installation tips.
    view full answer...


< Previous
123. . .9



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Patrick B
Test Fit:
Patrick B
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.