To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (1000 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.This was installed on a 2016 highlander le plus. As advertised it fits perfectly and looks great. As a DIY-er, I was able to successfully install this hitch alone and make the correct cuts in under an hour. The hitch weights about 50lbs and once you set it into position (with help from jack stands), the screws go right in. It really is as simple as the video available online. Highly suggest this hitch. If negative things happens I will post a follow-up review. I don't expect it. Worth the price!
Can be installed by one person. The trick is rest the passenger side on the muffler, while having the driver side on a jack and lift it till it is semi-wedged against the frame. You don't want it too tight, just enough to keep it from moving while you get the passenger side bolts started. You can also zip-tie the hitch to the jack to keep it stable.
I haven't actually used a trailer since install, but at least it's there if I do. It would be nice to have the electric plug outside on the hitch, but with all the towing I do, the harness is better in the 'trunk'.
Installation of the trailer hitch and four wire trailer interface were straightforward using instructions on the Trailer website. I use my utility trailer about once a month. The hitch works very well and still looks like new no signs of rust or paint problems. I would buy both items again.
I received the hitch on time and no damage to the box and no scratches on the hitch. The directions were easy to follow and had the hitch installed in about 1.5 hours, I didn't have to jack up my vehicle (2016 Toyota Highlander), the hitch was light enough that I was able to lay it on my lap and start a bold on each side then work my way back installing the remaining 4 bolts. I torqued the bolts to specifications as stated in the directions then installed the wiring harness, that only took 15 min start to finish. I towed a 5' x 8' [rental] trailer with furniture on a 8 hour trip with no issues. Buying the hitch was cheaper that renting a truck to move my daughter into an apartment for her Junior year of college. Thanks again for a great product at a great price.
Daniel
9/5/2020
A really great product, towed a trailer 5 times since I installed the hitch, very pleased with my purchase!
I purchased after speaking with a customer service representative who confirmed this hitch will work with a full size spare tire. I installed it on 2015 Highlander and full size spare doesn’t fit. I was told I could return it. Not worth the aggravation to uninstall and return. Quality is good. Misleading customer service is another story. Not happy.
The Curt Trailer Hitch Receiver was easy to install and looks great. I had never installed a hitch before and it went really quick and was straightforward. I looked at the other hitch options available and felt this hitch did the best job of blending in with the vehicle, as if it had been there sense day one.
Nathan P.
4/7/2016
After one year Im still very happy with the purchase. Id recommend it.
We had a 2009 Toyota Highlander, that had no hitch when, we bought it. I used e-trailer and had a successful installation. We had no issues with the hitch or the electrical. We just purchased a 2015 Toyota Highlander without a hitch. I again used e-trailer for parts and installation instructions. I am very pleased with their products and service. Believe me you want to be sure about the products and installation instructions, when your spouse walks into the garage and sees the car taken apart. If I can do it, so can you.
Larry P.
4/16/2016
Still very pleased with the product. Between errand trips with Uhaul trailers, bicycle rack a d boat trailers, the hitch has been used on a weekly basis.
Perfect fit ! Easy install with help of a $10 metric socket set -if you don’t have one. No need to drop spare tire or jack up car. Definitely helps to have an extra set of hands to lift and hold the hitch mount under the car. I used a $20 zip saw to cut the Driver Side underbody panel after it was removed and Passenger exhaust deflector in place. Cutting-edge instruction diagram could be improved a bit. It appeared as an optical illusion to me.
Jscberry
8/8/2021
Great
I had to modify the instructions slightly. My vehicle is a 2015 Highlander, XLE. Installation was not difficult. Most of the time was spended on trimming the drivers side underbody panel to my liking. Passenger side trim don't have to be remove. On the metal facial tab, only remove the existing m12 bolt. I removed the bolts holding the muffler to give me easier access because this was a one man installation. Follow the rest of the information. Shipping was done fast and the vendor was always helpful providing information.
David R.
12/14/2015
I also have a 2015 XLE. Did you have it on a rack or did you crawl underneath?Did you need to use torque wrenches or were good standard socket wrenches okay?Did all the attachment bolts come with the kit?
Fits great. Install was fairly easy (more so than expected with cutting some undercarriage plastic required for fit). Watch a video for better visual instructions.
I bought the Hitch, Cargo Carrier, and Bag one year ago, and total cost was less than one airline ticket. We just traveled with 4 adults and 2 car seats to Silver Dollar City and had plenty of room in the car. The quality and ease of use is terrific. I hang the carrier in the garage and one person can load it easily onto the hitch. The waterproof bag allows loose items to be packed easily. Go for it, you won’t be disappointed!
Outstanding Value! I installed in about 2 hours by myself and didn't lower the spare tire. The installation video was very helpful. But, there are a few items in the video that need updating/clarification. At 4:46, the bracket doesn't get re-installed. That's even mentioned at 7:39 in the video. As well, at 5:00 the muffler bracket doesn't need to be removed and you can see that it wasn't removed at 7:04 in the video. Nothing was mentioned about cutting the plastic muffler shield, which is seen cut at 7:02. I was able to just push it out of the way with the hitch. So, I didn't cut it off like the written instructions stated. And for trimming the driver's side panel at 7:55, I trimmed a lot less, see my photos. Lastly, be sure and adjust the hitch side to side before tightening the bolts to ensure it's centered. I highly recommend etrailer and am very happy with my purchase!
Excellent step by step installation instructions down to the smallest detail. Perfect fit! The Carpod basket is perfect for hauling any kind of cargo, including extra large garbage cans!
Billy
5/24/2019
Still an awesome product! Been using it weekly to haul garbage and more recently for carrying my push mower and weed eater.
The Curt 13200 is a great substitute for the factory hitch. Fit is perfect. Comes right to the bumper, but does not extend out like the factory hitch. Installation was easy following instructions in the etrailer video. I cut a little less off the left side cover. Works well with hitch-mounted bike rack. I Don't know how it would work with towing applications.
After owning this trailer hitch for one year, it still looks and operates the way it did from day one. It is extremely solid, and as far as I can tell, flawless. Highly recommended.
Reuben
4/28/2022
A year later, this hitch is still operating like new. No issues whatsoever!
Attaching this hitch to my 2014 Toyota Highlander LE Plus was pretty straight forward. It is much easier to have a second set of hands. I attached the hitch by myself. I had a couple of stands to help me. I was fortunate because I have access to a car lift which made the installation very convenient. The only issue I had with the installation instructions was the section where they tell you to trim the driver side panel. The instructions tell you to trim off way more than you need to. The only cutting that needs to be done is a 1” wide cut from the back of the panel to around 2” past the existing hole in the panel (See photo). For placement of the cut compare the panel to the hitch bracket. As for function… I have not attached anything to the receiver yet.
Fast delivery, good instructions and a video on you tube on my exact car. Turned out great. Now we can load the bike rack on
Thanks!
Juan R.
7/21/2021
Product still is great. Bike rack fits great still, and no corrosión or wear seen on the hitch
I seldom take the time to write a review but I felt compelled to share my excellent overall experience with etrailer.com. I ordered the C13200 trailer hitch receiver, 2" ball, 2" ball mount receiver, pin/clip, and C56217 wiring harness for my 2017 Toyota Highlander XLE. All arrived in no time and in excellent condition. The installation videos and PDF documents are outstanding. I installed the hitch receiver in roughly 45 minutes - includes time to convince brother in-law to come over to help hoist it into place. Wiring harness installation was a breeze, roughly 20 minutes (again, great instructional videos). I could not be happier with the finished product. Thanks etrailer.com for making this a trouble free installation. If you are considering adding a hitch, etc. go no further, you are at the right place...order away. Its very easy to install and you will save a trailer load of cash!!!
Looks great on my 2018 Toyota Highlander Hybrid! I ordered in on a Sunday afternoon and it arrived (Maryland) on Thursday in great shape. I reviewed the installation video a couple of times and took some notes and started the install. I am a car novice and I don't do anything to my vehicles but put gas in them. But based on the great videos and all the reviews about the ease of installation, I decided to save some money and do it myself. It was totally worth it! If I can do it, you can too. The video was spot on with a couple of exceptions:
- At 3:48 of the installation video you can see the "lower fascia exhaust air deflector" although they never mention it. You have to cut off that deflector down to 2" or you won't be able to get the hitch onto the frame. They don't mention it at all in the video, and so I made the mistake trying to install the hitch without cutting it. You MUST cut it first.
- The tow hook that they mention and remove at 4:17 of the video was NOT on my 2018 Toyota Highlander Hybrid. I thought I must be missing something, but it the video you can see it's attached to two of the holes that are used for mounting the hitch. There was no tow hook on my vehicle - it just had the plastic plugs in those spots.
- There is a bracket on the frame rail mentioned and removed at about 4:55 of the video. They also mention that it is reinstalled later "sandwiched in between the hitch." However, it is never mentioned again in the video. The written instructions make no mention of reinstalling it so I left it off.
A couple of other notes:
- A hacksaw works great for trimming the panels if you choose to reinstall them.
- Lower and remove the spare tire. It gives you a lot more room during the installation.
- Unless you are a superman or rig up some kind of holder for the hitch, you'll need another set of hands to get a bolt in each side.
- Last note is that I don't know how you would possibly get 86lbs of torque on the mounting bolts unless you actually have a torque wrench. I don't, but I'm lucky enough to have access to an auto skills center so I set the torque on the bolts there. Even with the 1/2" torque wrench that I used there that is about two feet long, it took a LOT of work to put 86lbs of torque on those bolts. If I was only using my own socket set to set the bolts, I wouldn't feel comfortable with the installation.
I primarily installed the hitch to use for a bike rack, which I haven't purchased yet. I'll update when I buy one and get it mounted on the new hitch!
This Curt trailer hitch looks great on my 2015 Toyota Highlander. The installation was just as the instruction videos demonstrated. No surprises. The end product is high quality and has enabled me to tow my trailer and use my bike hitch.
Awesome! I was worried about the look of this hitch vs OEM clean look. But this is really clean looking, easy install, you do need an extra hand for like 5 minutes only. OEM is like 3 times the price. Thanks. My 2nd hitch from this company.
Did this install by myself on my 2017 Highlander XLE.
I am not a tall person, and am 68 years old, but was able to use a bucket to raise the hitch high enough to get one side screw stared, then the other. After that, it was easy. Hardest part was putting 86 pounds of torque in a laydown position, but after a few grunts, and chosen words, my torque wrench clicked. The Hitch itself is low profile enough not to hit shins when putting in groceries, which the wife likes, as well as a very good finish.
Thank you. Great Hitch, Great Price, and Great instructions.
This was by far the worst packaging i have ever received from etrailer. I have bought at least 3 different ones and this one was the worst.
It came bear to my doorstep not even a box to come with it. It was scratched and all.
Very pleased with this product - high quality and “easy” installation. As some others have mentioned, the packing for shipping could use some reinforcement or padding. The shipping box arrived pretty beat up and the hitch had some dings as there really wasn’t any padding / protection. That said, cosmetic issues for something that goes under the car wasn’t that big of a deal for me. The installation itself was about as straightforward as can be. Make sure to watch the videos and read the instructions multiple times. Having done so I was fully prepared. I would suggest having a couple of extra sets of strong hands to help position the hitch while the initial screws are set. I tried to use my wife and 12 year old daughter - we got it done, but they struggled to hold the hitch in place for the initial screws. They were troopers and we got it done. Very pleased with the quality and aesthetics of the end product.
Super easy install of the C13200 on my 2018 Highlander Limited. I reviewed the videos for installing hitch and harness. They were well done and missed nothing. I set the hitch on an overturned 5 gallon bucket and was able to easily start the bolts on each side without a second set of hands. I marked and cut the panels with a fresh blade in a utility knife. The plastic panels are just soft enough.
I did not have to take the spare down but I do see where you would need to tilt it when raising and lowering it into place.
One suggestion for the folks at e-trailer: put your decals on straight if you'd like me to advertise for you. Mine was slapped on crooked and creased so I took it off. You do a great job on everything else!
This was the second time I've bought a hitch from you and am completely happy with your products and service. Oh, and wiring harness was a cinch, too!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Atyakker
12/12/2024
A year later and the hitch is rock solid. I have used it several times this year and it is as expected. Install following directions and you should be good. Highly recommend.