bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13284
lowest price pledge
Retail:$265.46
Our Price: $188.71
You Save: $76.75
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 35 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13284 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (130)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - C13284

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • CURT
  • Concealed Cross Tube
  • 600 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 4,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 600 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13284 Curt Class 3 Trailer Hitch Receiver

Installation Details C13284 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13284

Average Customer Rating:  4.9 out of 5 stars   (130 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

I was very please with how easy this bolted on. The instructions would have been enough but there was a video online that showed how to install making it an easy project. An extra set of hands or two would help bolting on the hitch, but after that,one person is all you need. The hitch reciever feels well made and this item was delivered promptly and price was unbeatable. The company has great customer service. I highly recommend!




by:
2020 Mazda CX-9

Great experience and resources. From the web site confirming correct trailer hitch, to "How To" videos, very smooth process. Delivery was really quick. Had my friend help out, he didn't see the videos and got the mounting plate "stuck" inside the channel, but I was able to rescue it and then get the hitch mounted correctly. Friend was really impressed with the manufacturing and how well it was designed. Also got the Wiring Harness (ignore the Toyota First Aid Kit in the Wiring Picture) and installed just in case I will need to use a trailer with lighting on it. Currently will use the hitch to transport bikes.
Well Done!




by:
Buick Enclave

I purchased and installed primarily for a carryall for luggage. But recently purchased a utility trailer and it works great! Second hitch receiver I purchased for both of my vehicles. Buick Enclave and a 2020 Mazda CX-9.




by:
2020 Mazda CX-9

Bolted right up, nice hardware included.


Comments
Worked well, no rust no flaws
Tom - 03/21/2022


by:
2018 Mazda CX-9

Excellent product and easy to install! I decided not to wait for my wife to get home, but lifted the hitch on some 2x scrap I had. I didn't realize you supplied the pull wires, but they helped immensely!
The completed hitch doesn't stick out beyond the bumper! Nice!!!


Comments
Still happy! It just works. Thousands of trouble free miles pulling my Sooner.
Barrie R - 07/04/2019


by:

etrailer is the place to shop because their products are top notch quality and they ship fast! Installation of Curt Trailer Hitch Receiver - Class III - 2" on my 2019 Mazda CX9 was super simple thanks to etrailer's step by step instructional videos.




by:

I needed a hitch in a hurry and they did NOT disappoint, the customer service was excellent and the shipping super fast. Pricing very reasonable as well. Highly recommend!




by:

I put it by myself on my 17 cx9. Great product, sturdy, tough and nice looking. Easy to install and after a year it is still properly attached and no issues. I use it only to hold bike racks and never on real hitching. Nevertheless, great product!




by:

Calls for 2 man installation, I did it myself with a floor jack and jack stands. Raised the back a few inches, then lowered the exhaust onto a jack stand, maybe 4-6 inches. Then used another hydraulic jack to hold Hitch in place while I secured nuts. Probably easier than using a lift.




by:
Mazda

Works as expected. No issues. Installed on a 2019 Mazda CX-9. Towing a 17’ aluminum V Hull boat.




by:

Quality hitch. Easy to install and the instructional videos were extremely helpful. It did arrive with the paint rubbed off on one corner due to shipping that I had to touch up the paint, which is why I'm not giving it full stars.




by:

ETrailer was prompt to answer my question concerning the correct hitch. I purchased the recommended hitch and it arrived quickly and nicely packaged. Good company!




by:
Mazda

This trailer hitch fit great with our 2016 Mazda CX-9.




by:
2021 Mazda CX-9

Took Auto F/X approximately 1 hour to install the hitch. Looks great on our 2021 Mazda CX-9.




by:

Great instructions and installation video, was able to install it fairly easily.




by:
2019 Mazda CX-9

Highly recommend this site! The whole purchase, shipping and installation process was simple, fast and efficient. Easy to identify the correct hitch for my vehicle, competitive pricing, great communication from order submission to shipment to receipt of the part plus awesome installation video made this a simple DIY project. Thank you etrailer.com!




by:
2017 Mazda CX-9

Installation was a breeze, I took my time and still was done in less than an hour! With the wire supplied for fishing the bolts through it was so easy my kids could have installed it!!




by:

Perfect fit, took 20 minutes in my garage to install. Very easy.




by:

Great service and fast shipping




by:

Tracking was great. New exactly where it was in the process and shipped out the same day I ordered. Received quickly. Was able to install myself without too much trouble.




by:

Had it for a year now. Easy to install and met all my expectations. Highly recommend.




by:

Solid construction and easy to install. You can’t beat it. Plus a year later it still looks new.




by:
Mazda

Delivery time was great (3-4 days). Put the hitch on my Mazda CX9. Installation was a 2-3 hour job with an experienced mechanic (Master). Directions provided were a big help. Hitch is well built and comes with a durable paint on it. I will be using it for a enclosed 5X8 trailer and a bicycle rack. I would recommend this product to everyone!




by:
2018 Mazda CX-9

Well, the box was beaten to smithereens but the contents were fine. The holes in the box were of sufficient size for the mounting hardware to have fallen out - but whomever packed it secured them to the hitch! Hooray - no delay waiting for more parts. Having used Curt hitches in the past, I knew about the quality, and this one is no different. The tiebreaker for etrailer is the plethora of information regarding specific vehicles on the web site. I can't say I wouldn't do this again, because I DID do this again!! Not my first order by a long shot, and based on my own history - probably not my last. I have always found their accessories, and component parts to be first rate, and keeps me coming back for more!




by:

Easy to install!



25
131
Show More Reviews

See what our Experts say about this CURT Trailer Hitch



  • Recommended Trailer Hitch for 2018 Mazda CX-9
    It looks like the second generation for the Mazda CX-9 began in 2016 and continues through the current model. The changes to the rear frame and bumper on the new generation were enough to require a new trailer hitch for it to fit properly. As you suspected, you will need to obtain a new hitch for your 2018 Mazda CX-9 and I recommend the Curt Hitch Receiver # C13284. This Class III hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation....
    view full answer...
  • Will the Curt Hitch for a 2020 Mazda CX-9 Work with the Hands Free Lift-Gate Feature
    The Curt Trailer Hitch Receiver part # C13284 which is a fit for a 2020 Mazda CX-9 will work on models with the hands free lift gate feature. That said, you will need to place your foot on either side of the receiver tube in order to activate it but that's it. The Curt hitch is an excellent option which offers bolt-on installation and a hidden design.
    view full answer...
  • Can Hands Free Lift Gate On 2021 Mazda CX-9 Be Used With Curt Trailer Hitch C13284 Installed?
    You will still be able to use the hands free lift gate feature on your 2021 Mazda CX-9 with the Curt Trailer Hitch Receiver # C13284 installed, but you will need to put your foot on either side of the receiver and move it in and out until you find the sweet spot of the sensor. After doing this a few times it will become second nature on where to place your foot. I included a video of the # C13284 being installed for you to take a look at.
    view full answer...
  • How Much Does The Curt Class III Hitch Receiver For My 2020 Mazda CX-9 Weigh
    According to Curt, the Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C13284, weighs 34.1 lbs. It has a shipping weight of 40 lbs. It has a maximum tongue weight of 600 lbs and a maximum gross trailer weight of 4,000 lbs. I have included a video installation link below.
    view full answer...
  • Is There a 2 Inch Trailer Hitch Receiver For 2022 Mazda CX-9
    There is indeed a trailer hitch with a 2 inch receiver that fits your 2022 Mazda CX-9. It is from Curt, and I verified with them that the hitch is a fit for your '22; the correct part is the following: - Curt Trailer Hitch Receiver # C13284 The # C13284 is a complete bolt-on installation so you don't have to do any drilling to the frame of your 2022 CX-9, and also has a concealed crosstube so only the receiver is showing, allowing your Mazda to keep a more streamlined appearance.
    view full answer...
  • Re-Securing Sensor On Factory Hitch for 2017 Mazda CX-9 with Curt Class III
    I can't be certain as to what the sensor is but I have heard before that there are studs on the body you can re-attach it to which is used on models without the factory hitch. You can then proceed with the Curt Trailer Hitch Receiver part # C13284.
    view full answer...
    Image 1 for
  • Removal of Lower Trim Panel for Trailer Hitch Receiver Installation on 2016 Mazda CX-9
    On both the Draw-Tite # 76020 and Curt # C13284 trailer hitch receivers the lower trim panel on the 2016 Mazda CX-9 is not reinstalled. I've linked videos as well as the install instructions of both hitches for you to take a look at.
    view full answer...
  • Installed Position of Draw-Tite & Curt 2-Inch Hitches on 2016 Mazda CX-9
    We have not yet had a local customer bring in a 2016 Mazda CX-9 for a hitch install but I can give you some help in determining the installed position for a hitch. I went to our warehouse and measured Draw-Tite hitch # 76020 and Curt hitch # C13284 so you can use those dimensions to give you a close approximation of where the hitch tube will be relative to your bumper and to the ground when installed. Since both install on the bottom surface of the car's frame what I did was measure from...
    view full answer...
    Image 1 for
  • Will Curt Trailer Hitch from 2009 Mazda CX-9 Fit 2019 Mazda CX-9
    Your brand new 2019 Mazda CX-9 will require a new trailer hitch. The Curt Class III Hitch # 13575 you currently have installed on your 2009 CX-9 is only compatible with this vehicle up through the 2015 model year. Based on my research it looks like the CX-9 went through a generational change for the 2016 model year and there were enough differences to the rear of the vehicle that a new hitch fitment was needed. For your 2019 Mazda CX-9 the Curt Class III # C13284 will work perfectly....
    view full answer...
  • How to Know Correct Torque Values for Hitch Installation Hardware for Curt Class III Hitch C13284
    Trailer hitches we sell always include the appropriate hardware kit and instructions that specify the torque values for the fasteners. Sometimes a hitch may use more than one bolt size and these might in some instances use different torque values. But again the hitch installation instructions will detail this as well as the specific tools required to install it. Curt 2-inch Class III hitch # C13284 install instructions are linked for you. I also linked an install video showing your exact...
    view full answer...
  • Which Hitch for 2021 Mazda CX-9 Has Best Clearance for Bike Rack
    The Curt hitch part # C13284 has the best clearance for a bike rack to fit past the rear bumper. It has 5 inches from it's pin hole out to the furthest edge of the rear bumper whereas the Draw Tite # 76020 has 7 inches.
    view full answer...
  • Mounting Plate For Attaching 7-Way & 4-Way Trailer Connectors To 2" Receiver With Hidden Cross Tube
    I recommend using the Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors # C58000 for attaching a 7-way plug onto your 2021 Mazda CX-9. The bracket will mount to the face of the receiver on the Curt Trailer Hitch Receiver # C13284. This is the cleanest way to attach the 7-way where it easily accessable and will not require you to drill a mount into your bodywork since your receiver tube is hidden up behind the bumper.
    view full answer...
  • Which Curt Hitch Fits 2020 Mazda CX-9
    Yes, the Curt hitch part # C13284 that you referenced is confirmed as a fit for your 2020 Mazda CX-9. For trailer wiring the Tekonsha part # 118278 is a confirmed fit and easy to install as well! I attached install videos for both of these for you to check out too. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
    view full answer...
  • Best Hitch for Bike Rack On 2019 Mazda CX-9
    The best trailer hitch we offer for a 2019 Mazda CX-9 to use with a bike rack is the Curt Trailer Hitch Receiver part # C13284 because the receiver tube is closer to the edge of the bumper than other options which allows for more clearance with a bike rack. The distance from the center of the hitch pin hole to the edge of the bumper is 5". In regards to a 1Up Bike Rack, this is not a brand we carry so I would not be able to confirm fit. However, so long as the distance from the center...
    view full answer...
  • What is Weight Distribution Capacity for Hitch that Fits 2020 Mazda CX-9
    Trailer hitches sometimes have higher towing capacities when you use a weight distribution system with them like the Curt Hitch part # C13284. What a weight distribution system does is use spring bar leverage to distribute some of the trailer's tongue weight up to the front axle of the tow vehicle which ends up reducing rear suspension sag, improves handling, and braking. I attached a help article on weight distribution systems for you to check out as well. The Strait Line system part...
    view full answer...
  • Compatability Of The Curt Trailer Hitch Receiver With The Hands Free Liftgate On 2021 Mazda CX-9
    We have received reviews for the Curt Trailer Hitch Receiver # C13284 confirming that the hands-free liftgate will operate with the receiver installed on a 2021 Mazda CX-9. You should not have any issues using yours on your CX-9 but as a general guide line I do recommend testing it after the receiver is installed as generally one side may work better at sensing the foot movement. The Tekonsha T-One Vehicle Wiring Harness # 118278 will allow you to have a 4-way flat trailer connector by...
    view full answer...
  • Tongue Weight Limit of 2019 Mazda CX-9 With Curt Trailer Hitch C13284
    You are always limited to the lowest-rated component, whether that is your vehicle - in your case a 2019 Mazda CX-9 - or the equipment. So I took a look at the owner's manual of your '19 CX-9 and it says the max towing is 3,500 lbs like you mentioned, but didn't specify a max tongue weight, just that it needs to be 10% - 15% of the trailer weight. So your tongue weight can be more than 350 lbs on your '19 CX-9, and up to 525 lbs with the Curt hitch that fits: - Curt Trailer Hitch Receiver...
    view full answer...
  • Will Curt Hitch part # C13284 Fit a 2016 Mazda CX-9 Signature
    Yes, the Curt hitch part # C13284 is a fit for your 2016 Mazda CX-9 Signature. The Signature model is basically a really nice interior package that would not interfere with the hitch compatibility. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage...
    view full answer...
  • Stable Bike Rack Recommendation for 2016 Mazda CX-9 for Carrying Bikes with Fenders
    If you plan to carry bikes with fenders you'll need a bike rack that only grabs the bikes by the frame as the wheel mount style will not work with the fenders. The Thule DoubleTrack Pro XT bike rack part # TH92BJ is a very stable rack option that will fit the Curt hitch part # C13284 that you referenced for your 2016 Mazda CX-9.
    view full answer...
  • Is It Better To Use 1-1/4" or 2" Hitch on 2020 Mazda CX-9 for 5 Bike Rack
    In regards to stability, using a 1-1/4" shank with a 1-1/4" hitch will be more sturdy than using a 1-1/4" shank with 2" adapter with a 2" hitch. However, the 2" hitch will have a greater weight capacity than a 1-1/4" hitch which may be needed for five bikes so the latter is what I recommend. The Curt Trailer Hitch Receiver part # C13284 with the Thule Apex XT 5 Bike Rack part # TH9026XT is what I recommend. The SnugTite stinger on the Thule Apex will do a great job of reducing sway/rattle...
    view full answer...
  • Recommended Bike Rack for Aventon Aventure Fat Tire E-Bike
    The Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes part # HLY84FR works great for a fat tire e-bike, straight out of the box without any additional adapters. It has an 80 lb per bike weight capacity and is compatible with 5" wide tires. It also has locks for security, both the bike and rack. Please note, you will need a 2" trailer hitch for this bike rack option so if you don't have one I recommend the Curt Trailer Hitch Receiver part # C13284.
    view full answer...
  • What Hitch And Wire Harness Works On A 2021 Mazda CX-9
    I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13284. It is a custom fit, bolt on installation with no welding or drilling required to install. You will need the T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 118278 to get you trailer lights. And a Mounting Bracket 4-Pole Flat # 18144 to keep the connector off the ground and protected. To complete the basic set up you will also need a ball and ball mount kit like the...
    view full answer...
  • Can Thule Helium Bike Rack be Used in Class I Trailer Hitch
    I verified with Thule that the Helium Platform XT rack will indeed fit and work in a Class I hitch with a 1-1/4" receiver, and also work on a vehicle with a 2" hitch. It comes with a 2" sleeve that you'd leave on when using it in the 2" hitch and you'd just remove the sleeve when using it in the Class I, 1-1/4" hitch. So here is what you'd need for the rack and hitches for your VW and Mazda: - Thule Helium Platform XT Bike Rack for 2 Bikes # TH53GC - Curt Trailer Hitch Receiver - Class...
    view full answer...
  • Trailer Hitch Receiver, Wiring and Ball Mount For Pulling a U-Haul Trailer With a 2022 Mazda CX-9
    The Curt Trailer Hitch Receiver # C13284 is a confirmed fit for your 2022 Mazda CX-9. I verified this with Curt. When we installed this on a 2020 CX-9 we found the receiver height to be 13-1/2" from the ground. I recommend the etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit # EBMK4 as its 2-3/4" rise will put you at 16-1/4" and most trailers have a 16" coupler height. You will also need the T-One Vehicle Wiring Harness # 118278 to operate the trailer lights on the U-Haul trailer. The Mounting...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Matthew E
Updated by:
Matthew E
Employee Isabelle B
Updated by:
Isabelle B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-833-496-1390