bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13293
Retail:$319.95
Our Price: $206.65
You Save: $113.30
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 37 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13293 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (111)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13293

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • Visible Cross Tube
  • CURT
  • 750 lbs TW
  • 6000 lbs WD GTW
  • 750 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 750 lbs
      • Maximum TW when used with weight distribution: 750 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13293 Curt Class 3 Trailer Hitch Receiver

Installation Details C13293 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13293

Average Customer Rating:  4.8 out of 5 stars   (111 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Installed this on a 2017 GMC Acadia SLT-1. Instructions were spot on. Required cutting heat shield and trimming some caulking, but well worth it for a safe & proper fit. Not hard at all. Tin snips and a pocket knife.
The fish-wire makes installation a breeze and I was able to put the washer and bolt on through the end of the frame instead of the minute "access" hole. Two sets of hands would make lifting this into place and holding it there much easier, but can be done with some blocking while finger tightening the nuts.
There is enough clearance to install without jacking, but I just backed up my oil change ramps for lots of extra room. Took about 2 hours from box opening to turning the light off in the garage.



by:
GMC Acadia

Very impressed with the hitch. Looks very well put together. It sits just below the bumper on the Acadia, which is right where I wanted it. It was no 20-40 min instal. And I’m not a novice. There had to be more width to remove off of the heat shield and along the sides to make this fit easier. I had to really hit it hard with a rubber mallet to get it to line up with the holes. I cut the heat shield as shown in the instructions. For this one, it would have been less length and more width. But after prying it over, beating it and working it, I got it. Wife and my arms were sore after holding that up and all the adjustments. I’d also note that some of the caulking that is up behind where the two mufflers attach needs to be shaved off to allow the hitch to lay flat and make it easier to get that nut on.

Those were my only parts that I struggled with but I love it. It’s a great looking hitch. Thank you.



by:

Still a PITA, had to break one of the rear exhaust nuts, 2 per each side is overkill anyway, no way bending was gonna allow hitch to sit flush. It’s a tough project if doing at home, not a lot of room to work under these Acadia’s.



by:

This has been a great product so far. The kit came with everything that I needed. From lifting the car to hooking up a trailer to test was about 3.5 hours of work on my own. Everything fits perfectly and I haven't had any issues so far, given it's only been a few days.



by:
2021 GMC Acadia

Completed my installation. Took about 3 hours, but that was mostly because I was stopping to look at the video each step of the way. Completed by myself with no help. Used jack stands to help hold the hitch up while bolting the first side. Messed up on one spot, but I just misunderstood which speeder nut stud needed pulled off with the pliers. Got it figured out after I pulled off the wrong ones, but definitely my fault. Attention to detail :). Looks really good, also installed the trailer cable. I’ll be towing a trailer about 2,000 pounds next month for my move to CA from TX (13 hour drive). My 2021 Acadia (V6) doesn’t have the equipped package with the upgraded radiator and what not, but hoping it should still work out. Dealership has no clue what to tell me lol.



by:

Hitch fit great and came with everything needed to install it, including very easy to understand instructions



by:
2019 GMC Acadia

Per the installation video, it went in as shown and was easy to do.



by:
2021 GMC Acadia

Fit in well on the 2021 Acadia. Make sure any caulk or tin from heat shield is REALLY out of the way. Every ounce of space makes a difference for getting hitch into place. If at all possible hold hitch in place to mark where heat shield needs to be trimmed. The wire bolt pulls worked GREAT. Videos online by etrailer are big help. I installed alone, yes help from a friend is BETTER than my floor jack. 1.5 hours on this. I would recommend etrailer to a friend.



by:
2019 GMC Acadia

For our 2019 Acadia, this was a toss-up between this hitch receiver and the other one. In the end, the deciding factor was ease-of-install. I won't say this install ended up being easy, but one person can do it (use a jack to get it close and feed the fishwire for each bolt through the accompanying hole in the receiver, so you don't lose the bolt in the frame as you jack it up). Big tip: the instructions state to scrape off excess caulk on the frame...spend the time to mock up exactly where the receiver will go on the body, then use a sharpie to mark what sections of the caulk to remove. Getting the frame prepped for proper installation of the receiver took the most time. Other than that, it's a pretty straightforward job and the receiver fits snugly just under the bumper. No trimming required. Perfect!

Phillip

5/17/2021

It’s been a year since I installed this hitch receiver. And what are my thoughts about it? Honestly, not much, and I think that’s a perfect recap. It just works. Still just as snug as when it was first installed and so easy to use. During COVID, my wife and I took up a lot more biking and this hitch receiver greatly simplified the process of “taking the bikes”. Within minutes we were picked up and on the way to the trail. I have no regrets about purchasing this receiver. Great product! Thank you, etrailer!



by:
2020 GMC Acadia

Received parts quick and packed very nicely as always. The fishwife for the bolts was sweet. Definitely have to drop the exhaust down. Worst part is taking the heat shields off to trim. Only had to trim plastic cover a little with a razor. Turned out nice.



by:

Followed instructions on video and did it by myself until it came time to lift the hitch up. Very easy instructions, perfect fit!



by:

Shipped earlier than expected! Great packaging! Easy and quick install and instructions! Less than 45 minutes, start to finish! Highly recommended!



by:
2019 GMC Acadia

The trailer hitch was too long for our 2019 Acadia. We had to pay an installer $150 to take the exhaust off only to find out it was the wrong hitch. VERY DISAPPOINTED! Please let us know shipping and tracking information on replacement hitch that was to be sent out 3/24/2002. We are anxiously awaiting it so we can leave on vacation.

Etrailer Expert

Jenny N.

4/5/2022

I will have our Customer Service team reach out to you. This hitch is a fit for the 2019 GMC Acadia. It sounds like that the hitch may have been flexed. This means that the side brackets were knocked out of alignment. This can happen while in transit to our facility or to you. We do have a great FAQ that provides ways to move the brackets back into alignment so the hitch can be installed.



by:

Looks great on my 2019 Acadia!



by:
2017 GMC Acadia

Fit perfectly for my 2017 GMC Acadia. Well built, install medium difficulty, plenty of how to videos and pictures, but a little hard to do by yourself. And you have to make sure that 100% of the glue for the heat shields are removed, otherwise the hitch will not sit flush to the bottom of the car. Overall very happy with the purchase.



by:
2019 GMC Acadia

Installed easily. Has held up on my GMC Acadia for over a year with multiple uses



by:

Great hitch. Just follow the instructions and installation very straight forward.



by:
GMC Acadia

It fit perfect and worked just like all of my Curt hitches that I have purchased from etrailer. I don't shop any place else for any of my trailer or towing needs. As far as I can tell some things I might have to give a couple of cents more for but they make up for it in their customer service. Erika and George are the greatest and are always eager to help me out if I need it. I will and do, highly recommend etrailer to any one looking to get a fair deal on trailer parts and accessories. It's a shame that the GMC ACADIA doesn't have the power it needs to tow anything bigger than the mother-in-law though
The one complaint I have is that there is no place to mount the vehicle electrical plug without using a little Micky mouse bracket...



by:

Approximately a year ago I ordered a receiver and luggage rack for my GMC Acadia. We have used them on two trips, and they have worked great. Installation wasn't difficult. I would highly recommend this product.



by:
2019 GMC Acadia

The body shop owner and myself watched the how to install video. We took down the exhaust as indicated on the video, the hitch did not fit as indicated. We had to grind the egg shaped holes larger, in order to make the hitch fit. The installation took 4 hours and two men working.

Etrailer Expert

Sierra K.

7/14/2021

Thank you for your review. It sounds like your hitch receiver was flexed. We have solutions for this problem attached in a help article:



by:

Hitch Fit as stated,it went together well. Son in law and I put it on in about 1 1/2 hr on a blacktop driveway. We were pleased an it was a good project with money saved. Also wire harness for trailer was very easy plug in route. Lights even worked correctly haha. Nice. Money saving.



by:

I like that it was very easy to install with help of yawls [online video] Thank yawl



by:

Very good product and instructions, just note that this installation takes a little bit of time.

Joel B.

7/25/2020

working great...looks good



by:

everything I have purchased from etrailer has gone as stated. the last purchase was a receiver hitch and was easy to install. it will my life a lot easier when pulling or hauling different item with it. I don't know if I should say this but don't know why not the people you talk to, to make sure that I get the right one for my cars are excellent, could not be happier with them . I don't wright reviews for much of anything but these people are very good and the prducts are very good.



by:

Curt trailer hitches are a great product. This is my second one. The ordering process through Etrailer is always a pleasant experience. Thank you !


25
142
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Trailer Hitch For A 2023 GMC Acadia
    We have the perfect trailer hitch that is confirmed to fit your 2023 GMC Acadia! The Curt Trailer Hitch Receiver # C13293 has a bolt-on installation with no welding required. It has a gloss black powder coated finish that is over a protective base coat that offers superior rust resistance. The trailer hitch has a maximum gross trailer weight up to 5,000 pounds and has a maximum tongue weight up to 750 pounds. I would recommend checking your vehicle's manual to find the proper towing...
    view full answer...
  • Correct Curt Trailer Hitch to Fit 2020 GMC Acadia
    The Curt Class III Trailer Hitch Receiver # C13293 is indeed a confirmed fit for your new 2020 GMC Acadia and it's going to line right up to existing holes in the vehicle's frame rails for a bolt-on (no-drill) installation. The only minor modification that needs to be done is some trimming on the heat shield to allow for fitment with the hitch. I have attached the section from the install manual that details this step so you can see exactly what's required. I have also attached a full...
    view full answer...
    Image 1 for
  • Distance Between Mounting Holes Left to Right For Curt Trailer Hitch Receiver On a 2020 GMC Acadia
    I measured one of the Curt Trailer Hitch Receivers # C13293 in our warehouse and it came up 40-1/8" wide measuring from the center of the mounting holes from the drivers side frame to the passenger side frame rail. I have included this in an image below as well.
    view full answer...
    Image 1 for
  • Is 2020 Cadillac XT6 Compatible with Curt Hitch Receiver 13293
    I think it is a safe assumption because you have confirmed the OEM hitch fit that the frame locations will be the same. The trim would be the big question then because hitch # C13293 hasn't been tested on the 2020 CADILLAC XT6 yet. The fit for the 2020 Acadia excludes the AT4 model for off-road fun for example but you may want to give it a try. We don't confirm fits unless the manufacturer has or unless we have tested it to confirm a fit ourselves. Unfortunately at this time (May 2020)...
    view full answer...
  • Hitch Receiver Recommendation For My 2022 GMC Acadia
    I have two hitch receivers that are compatible with your 2022 GMC Acadia. The first hitch receiver is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C13293. This is a Class III hitch receiver, meaning that it is a 2" hitch receiver. It has a maximum tongue weight of 750 lbs and a maximum gross trailer weight of 5,000 lbs. It is powder coated steel to help resist rust and corrosion. This hitch receiver will bolt on your vehicle. The next hitch receiver is the Draw-Tite...
    view full answer...
  • Trailer Hitch and Wiring Harness for 2019 GMC Acadia
    The trailer hitch I strongly recommend for your 2019 GMC Acadia is the Curt # C13293 because it is a bolt-on installation that will not require drilling into your Acadia's frame to install, and is designed so that much of the hitch is not visible, as you can see in the accompanying photo. This Class III, 2" trailer hitch has a black powder coat finish which helps protect it from corrosion and also has a 5,000 lb towing capacity and 750 lb tongue weight capacity. The Curt # C13293 is made...
    view full answer...
    Image 1 for
  • Why Won't the Mounting Bracket on My Curt Hitch # C13293 Fit My 2020 GMC Acadia?
    I'm sorry to hear about your hitch! Given that your vehicle is a non-AT4 model 2020 GMC Acadia, one of the common issues people have with hitches is bending/bowing of the hitch during delivery. If the angle on the welded end of the driver's-side brackets does not match the frame rail, it does indeed sound like an issue with bending/bowing of the Curt Trailer Hitch - 2" # C13293. While we have not heard of the # C13293 not fitting your vehicle, bending/bowing is more common than people...
    view full answer...
  • Comparing the Draw-Tite and Curt Trailer Hitches For 2020 GMC Acadia
    Both the Draw-Tite part # 76023 and Curt part # C13293 trailer hitches available for the 2020 GMC Acadia are great choices however there are some differences that set them apart. The Curt hitch is easier to install and more visible on the vehicle while the Draw-Tite is requires a longer, more invasive install process but has a hidden cross tube for a cleaner look. I personally recommend the Draw-Tite over the Curt because once installed it looks nicer. I have attached a video of the installation...
    view full answer...
    Image 1 for Image 2 for
  • Fit of Curt Hitch on 2017 GMC Acadia
    The Curt Trailer Hitch Receiver # C13293 is a confirmed fit for your 2017 GMC Acadia. Keep in mind this hitch is going to require the use of stabilizing straps # 18050 with all non-trailer accessories such as bike racks and cargo carriers in order to maintain the warranty. I've added a link to a demonstration video which shows you how the straps are used.
    view full answer...
  • Photo of Hitch Panel Trimmed on 2020 GMC Acadia With Draw-Tite Hitch
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76023 is a great option for a 2020 GMC Acadia. The hitch knockout panel can be re-installed with the hitch in place but it must be trimmed in order to do so. I have attached a photo below which shows what it will look like once trimmed and re-installed. If you were to use the Curt Trailer Hitch Receiver part # C13293, the hitch knockout panel would be re-installed but with no trimming required.
    view full answer...
    Image 1 for
  • Comparing Curt and Draw Tite Trailer Hitches for 2019 GMC Acadia
    We have two hitch options for your 2019 GMC Acadia. We have the more hidden but harder to install Draw Tite part # 76023 and the easier to install but more visible Curt # C13293. It really comes down to what you value the most. If you want a shorter install time that's less invasive you should go with the Curt. But if you are one of those people who hates the look of a hitch hanging off the back of a vehicle the Draw Tite is easily the way to go as it allows you to reinstall the rear bumper...
    view full answer...
    Image 1 for
  • Does Curt Trailer Wiring Harness Fit 2020 Acadia without Factory Tow Package
    Yes, the Curt wiring harness # C56325 does fit your 2020 GMC Acadia. You can verify by finding the connector behind your Acadia's muffler. If you don't already have a trailer hitch I recommend the Curt # C13293 because it's a much easier install than the other option for your SUV.
    view full answer...
  • Comparing Curt and Draw Tite Trailer Hitches for 2020 GMC Acadia
    We have two hitch options for your 2020 GMC Acadia. We have the more hidden but harder to install Draw Tite part # 76023 and the easier to install but more visible Curt # C13293. It really comes down to what you value the most. If you want a shorter install time that's less invasive you should go with the Curt. But if you are one of those people who hates the look of a hitch hanging off the back of a vehicle the DrawTite is easily the way to go as it allows you to reinstall the rear...
    view full answer...
  • Recommended Wiring Harness for 2019 GMC Acadia
    You're looking for the Tekonsha T-One # 118720, which will provide you with a 4 way plug to be used on your 2019 GMC Acadia and the Curt # C13293 hitch. This harness will tee into your existing wiring with a single plug, so it's super easy to install- I've attached a video of the installation process for you to have a look at, as well. If you don't already have a ball mount and hitch ball, the etrailer Ball Mount Kit # 989900 provides you with 2 ball mounts that will allow you to cover...
    view full answer...
  • Trailer Wiring Harness for a 2019 GMC Acadia Without the Factory Tow Package
    From the information I can find I believe your 2019 GMC Acadia will have the wiring routed back towards the rear of your vehicle whether you have the factory tow package or not (see attached photo). If you check up under the rear bumper of your Acadia you should find the wiring harness that you would plug the T-One # 118720 (for a 4-Way) or # 118276 (for a 7-Way) into. I have attached some installation videos on a 2017 Acadia as well as the written instructions for you to reference. I like...
    view full answer...
    Image 1 for
  • Which Curt Hitch Fits 2020 GMC Acadia
    We have a Curt hitch that fits your 2020 GMC Acadia with the part # C13293 but the part number you mentioned is not a confirmed fit. I attached an install video for this on a similar Acadia for you to check out as well.
    view full answer...
  • Curt Receiver Hitch and Complete Towing Set Up for 2021 GMC Acadia
    For your 2021 GMC Acadia, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C13293. This receiver hitch has a maximum gross trailer weight of 5,000 lbs and a maximum tongue weight of 750 lbs. This is the highest rated hitch receiver for the 2021 GMC Acadia. This fully welded trailer hitch receiver bolts onto your GMC Acadia's frame with no welding required. The powder coated steel is sturdy and corrosion resistant. I recommend the Curt T-Connector Vehicle...
    view full answer...
    Image 1 for
  • Hitch & Bike Rack For Two Electric Bikes on 2019 GMC Acadia
    From what I could find in the owner's manual of a 2019 GMC Acadia, the maximum tongue weight is 100 lbs for all models except the 3.6L with the V92 heavy duty towing package; if you have that the maximum tongue weight is 400 lbs. We don't offer OEM parts so I can't tell you exactly what the hitch ratings are, and GM doesn't offer those specs. What you can do to be sure is replace your hitch with one that does have the necessary ratings for a bike rack and two ebikes, the Curt Trailer...
    view full answer...
  • Curt vs. Draw-Tite Trailer Hitch Receiver For 2021 GMC Acadia
    Good question and we can definitely get you set up with the better option between the Curt Trailer Hitch Receiver # C13293 and the Draw-Tite Trailer Hitch Receiver # 76023. There are a few important differences to take note of, which is their visibility, clearances, and install. Let's start with the visibility, as the Draw-Tite has a hidden crosstube, while the Curt hitch has a visible crosstube, so you're going to see the entire body of the Curt hitch, so the Draw-Tite allows a much...
    view full answer...
  • Comparing Curt and Draw-Tite Hitches for a 2022 GMC Acadia
    The main difference between the Curt # C13293 and Draw-Tite # 76023 hitches for your 2022 GMC Acadia is the style of how it looks once installed. The Draw-Tite fits a little more snug up to the bumper of your vehicle and it's what I recommend going with because it looks a bit more clean. Aside from that they have different weight ratings (but that doesn't matter because your vehicle is rated lower than both) and the install for both will look a little different. The Curt will be easier...
    view full answer...
    Image 1 for Image 2 for
  • Which Heat Shield Studs Are Removed For etrailer e36AR Installation on 2017 GMC Acadia
    When installing the etrailer Trailer Hitch Receiver # e36AR you will remove one heat shield stud on each side after reinstalling the heat shields. The stud you will be removing is the one near the exhaust hanger where you removed the two bolts to lower the exhaust. See the attached picture. The installation process is the same as the # C13293. I have attached the instructions for the Curt hitch along with an installation video you can check out. If you jump to the 4 minute mark you will...
    view full answer...
    Image 1 for
  • What is the Difference between the Curt Hitch # C13293 and the Draw-Tite # 76023 for a 2021 Acadia?
    As far as the Curt # C13293 and the Draw-Tite # 76023 for a 2021 GMC Acadia, the Curt is only compatible with non-AT4 models whiile the Draw-Tite is compatible with both AT4 and non-AT4 models. Also, the Curt has a 750 pound maximum tongue weight capacity/5,000 pound gross towing capacity while the Draw-Tite has a 675 pound max tongue weight/4,500 pound maximum gross towing capacity. Another thing to consider is ground clearance and bumper clearance. For the Curt, it has a ground clearance...
    view full answer...
  • Best Hitch Receiver for a 2021 GMC Acadia AT4
    I have a solution for you but the Curt Trailer Hitch item # C13293 you referenced does not fit the AT4 model of the 2021 GMC Acadia. You are going to need the Draw-Tite Hitch item # 76023. This hitch is custom fit and made specifically for the AT4 models. It bolts to your Acadia with included hardware and requires no drilling. I have linked an installation video below. If you need a wiring harness and have the tow package, I recommend the Tekonsha T-One Vehicle Wiring Harness for Factory...
    view full answer...
  • Recommended Hitch for a 2022 GMC Acadia SLE
    The best hitch for your 2022 GMC Acadia is going to be the Draw-Tite Hitch item # 76023. This hitch is custom fit and bolts to your GMC with included hardware. I really like the Draw-Tite hitch because it installs behind your rear bumper cover and can be completely hidden when you are not towing. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity, and a 675 lbs maximum tongue weight. It can be used with a weight distribution system but this will not increase...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924