bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13406
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$205.61
Retail:$318.95
You Save: $113.34
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13406 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (99)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13406

  • 2 Inch Hitch
  • Class III
  • 3500 lbs GTW
  • Concealed Cross Tube
  • 350 lbs TW
  • CURT
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13406 Curt Class 3 Trailer Hitch Receiver

Installation Details C13406 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13406

Average Customer Rating:  4.7 out of 5 stars   (99 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:
2016 Toyota RAV4

This is the second Curt hitch receiver I have installed on a vehicle. Great products that go in easily as a DIY project and look good when mounted.



by:

I found exactly what I wanted for a concealed 2" receiver trailer hitch. It was easy to order, I received great customer service, and the product arrived as promised. Very pleased. Thank you.

Robin profile picture

Robin

12/4/2023

Great



by:

Nice hitch reciever! Installation was fairly smooth. One of the outer flanges that the bolts go through was bent slightly inward, probably from UPS mishandling. Other than that, it’s a very nice hitch. Recommended!



by:

Looks great, incredibly stable quite durable and has great powder coating on it. Installation video was as clear as it could be on my particular vehicle. Already used it to pull a small trailer a few hundred miles without any issues at all.



by:

2018 Toyota RAV4 - Super fast shipping , arrived in perfect condition. Installation was fairly easy but an extra set of hands to lift is ideal. Trimming the underbody plastic covers to fit around the hitch took a bit of time. Overall, it looks factory, great quality, highly recommended!



by:
2017 Toyota RAV4

This is a solid hitch, and overall I'm happy with it. Installation took two hours, but we were taking our time and checking every step against the installation video because this was the first hitch install for both of us.

Pros:
* Great appearance because the actual hitch is hidden; only the receiver tube shows.
* No loss of ground clearance.
* Installation video was extremely helpful: no need to take hitch to a shop for install.

Cons:
* Had to cut pieces out of two under-body panels. This was not a surprise, because it was in the video, but still I hate cutting pieces out of my car.
* Safety chain loop interferes slightly with using wrench to secure the bike rack.
* Template mentioned in the video was not included with the instructions, but they did give the dimensions so we made our own template.



by:
2018 Toyota RAV4

Install instructions excellent! Since I was installing on 4 year old car in the North East US it took a little longer. My vehicle was missing the passenger side frame rail cover and the frame mounting holes were crud. I had to use a 12mm-1.25 thread tap with an extension to clean them. Luckily I was able save the threads so bolts torqued to specs. If not my next step would have been to drill and tap the car frame mounting holes to SAE 1/2 inch 20 thread. Since this size is just a bit larger two new SAE 1/2-20 grade 8 bolts would have done the trick. Hopefully this helps anyone with issues as I did. I love the fact that the hitch cross tubing is not visible. Nothing worse than a rusty visible hitch that is inevitable in my climate. EXCELLENT PRODUCT!



by:
2017 Toyota RAV4

Perfect fit and excellent instructions between the included paper doc and the online video.



by:

This does not fit on a 2018 RAV4. Specifically there is module on the passenger side that interferes with the installation. I attempted to install over it however this ended up preventing the lift gate from operating properly.

Katrina D. profile picture
Etrailer Expert

Katrina D.

9/15/2023

I have gotten in contact with the manufacturer and they have looked into this and have had no other reports of this issue for the 2018 Toyota RAV4. They have stated that they do have a warning in the instructions, "Hands Free, Foot-activated power liftgate may only work in limited areas when the hitch is installed".



by:

Went on smoothly and it looks nicer than the one my wife has on her RAV she got installed at Uhaul



by:

Was really easy to install.



by:

I am very happy with the hitch I purchased last year. I am getting ready to purchase another one for my wife's car soon.



by: 07/31/2023

im happy with this peoduct. Let see the rest…..



by:

The hitch is great and I like the fact that it’s hidden. The finish is holding up it still looks new.

John profile picture

John

4/17/2022

It still looks new and no problems. I haul my jet ski and bikes with it , still very happy with it



by:

This is a solid hitch, and one year later, we're still extremely happy with it. We had a shop install it because we didn't have experience and wanted to make sure it got done right. Overall, great product.

Mark profile picture

Mark

7/14/2023

We love it! Still works great.



by:
2018 Toyota RAV4

Super easy install thanks to all the videos on your site. So far so good with the hitch and bike carrier, should have done it long ago.



by:
2015 Toyota RAV4

Great addition to my 2015 RAV4 to utilize Thule hitch style bike rack. Recommend watching etrailer install video before beginning work. Provided written instruction differ and the video identifies different/better rear bumper trip techniques/locations.

Tim profile picture

Tim

11/22/2021

Extra utility from this hitch addition on 2015 RAV4 has been awesome. From Nick racks to extra storage platform it has performed as expected. Slim profile! Solid as a rock! Great addition!!!!



by:

I owned the Curt hitch that was not tucked behind the bumper which resulted in me scraping on steep curbs. I bought this to give my back end more clearance and it worked. I have at least 3 inches more height in the rear.
Quality wise, the two mounting brackets weren’t perfectly parallel, leading to difficulty getting the mounting holes to align. This is a quality issue on Curt’s end. Fortunately I got it mounted but one hole is still unable to align, I only have 4 bolts on vs 5.

Jenny N. profile picture
Etrailer Expert

Jenny N.

5/27/2022

It sounds like that the side brackets were knocked out of alignment which is why the bolt holes are not lining up. This can happen while in transit to our facility or to you. We do have a great FAQ that provides ways to move the brackets back into alignment so the hitch can be installed.



by:

Fits nicely and works just fine.



by:

I haven't installed the hitch yet. I love the way etrailer.com helps you find the right hitch. Alexis was very helpful. they didn't have a wiring harness because of covid 19 hard to get items, but told me if I couldn't find one call her back. I found one at U Haul so everything worked out fine. Thanks for your company going the extra mile for the customer.

Dennis B. profile picture

Dennis B.

9/27/2021

no problems with the hitch so far. great fit and heavy duty. should last as long as I have the car.



by:
2017 Toyota RAV4

This hitch looks great and wasn’t hard to install. The instructions didn’t mention it’s super important to chase the threads before trying to thread the new bolts to the frame. I used a 12x1.25 tap and it made starting the bolts super easy. Also, I don’t know why Curt thinks a novice can do this in 40 minutes ?? I’m a “handy” person and it took me 2 hours



by:

Trailer setup works great



by:
2016 Toyota RAV4

hitch and video were great my 2016 rav4 rusty attachment bolts not so great hads to drill and tap 2 holes on the right, thanks again nice hitch great service



by:

Excellent product, exactly what I needed. Arrived in perfect condition



by:

Buyer beware! Does this hitch technically fit a Toyota RAV4? Yes. Does the correct installation of the hitch prevent the power lift gate from working and prevent total use of the lift gate at all? Also yes. I bought this hitch, installed myself, brought to a local place to check, and even though it lined up with the underside of my car it pushed up from under the latch for the lift gate and caused all sorts of issues. I contacted etrailer and even though I could not use it, they offered me no sort of refund and actually told me id be better off trying to scrap it. Several hundred dollars down the drain for an unusuable hitch, and a very disappointing outcome.


25
99
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Fit of Curt Class III C13406 Trailer Hitch on 2016 Toyota RAV4 Hybrid
    According to Curt, their # C13406 Class III hitch is a confirmed fit for all models of the 2016 Rav4, including the Hybrid model. If you'll be towing with the hitch, you'll also need a # 118578 trailer wiring harness, a # 2753 ball mount an either a # 19260 1-7/8 inch or a # 63845 2 inch trailer ball. I've linked to installation videos for the hitch and the trailer wiring harness.
    view full answer...
  • Best Trailer Hitch for Bike Rack on a 2014 Toyota RAV4
    The trailer hitch I recommend for a 2014 Toyota RAV4 is the Curt Trailer Hitch Receiver part # C13406 which offers a bolt-on install with hidden design that provides the best ground clearance. It has the larger 2" receiver tube opening so you can use pretty much any bike rack without issue. In regards to displaying the license plate, the Yakima PlateMate License Plate Holder for Bike Racks part # Y02713 will be a great option for this.
    view full answer...
  • Recommendation for Hidden Trailer Hitch on 2018 Toyota RAV4
    For your 2018 Toyota RAV4 I highly recommend the Curt Class III Max Frame # C13406 because it features the sleek hidden crosstube design that you're looking for where only the 2 inch receiver is visible from behind the vehicle. I have attached a couple images of this hitch installed on the RAV4 so you can see exactly how it will look. This Class III hitch will use existing holes in the vehicle's frame for a no-drill installation and it features a 3,500 pound towing weight capacity with...
    view full answer...
    Image 1 for Image 2 for
  • Cleaning Trailer Hitch Installation Weld Nuts in Frame of 2015 Toyota RAV4
    Since the nylon brC13406 hitch installed, the next thing I'd try is giving those threads a complete soaking in a spray lubricant like Kroil, WD-40 or PB Blaster, and giving them a good scrub with a wire battery terminal brush like what's included with # DW00254. Spray the threads down, let it sit for a few minutes then give it a good scrub. You might need to repeat this procedure a few times. If that doesn't do the trick, you'll need to bust out the nuclear option by using an M1 x 1.25...
    view full answer...
  • Trailer Hitch Receiver For 2016 Toyota RAV4 With Most Ground Clearance
    There is a trailer hitch receiver that is going to give your 2016 Toyota RAV4 a bit more clearance than the Curt Trailer Hitch Receiver # C13149 you currently have installed, which is another hitch from Curt: - Curt Trailer Hitch Receiver # C13406 When we test fit this hitch on a 2016 RAV4 we found that from the ground to the top inside of the hitch was 14-1/2 inches, which is the most highest clearance of any hitch that fits your RAV4. When you take away about 2-1/2 inches or so to account...
    view full answer...
    Image 1 for
  • Comparing EcoHitch and Curt Hitch for 2018 Toyota RAV4
    The Curt hitch part # C13406 and EcoHitch part # 306-X7219 are both a confirmed fit for your 2018 Toyota RAV4 and will provide a trailer hitch that has a concealed crosstube making it less visible than most hitches overall. The key differences are that the EcoHitch claims a shorter install time, is quite a bit more expensive, and is made from all recycled materials. So you pay a bit more for a shorter install time and a more environmentally friendly hitch. I attached a picture of what the...
    view full answer...
    Image 1 for
  • Correct Hidden/Concealed Trailer Hitch for 2010 Toyota RAV4
    The only hidden/concealed trailer hitch available for a 2010 Toyota RAV4 is the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7152 for models with spare tire storage on back and part # 306-X7174 for models with spare tire storage underneath vehicle. These are both great bolt-on options with no drilling or cutting/trimming required. The Curt Trailer Hitch Receiver part # C13406 is for a newer model.
    view full answer...
  • What Is The Difference Between The Square And Round Tube Curt Hitches For A 2016 Toyota RAV4
    There are a couple key differences between the round tube Curt # C13149 and the square tube Curt # C13406, but from what I could find out, the maximum towing capacity of a 2016 RAV4 is 1,500 pounds, which will make the tongue weight capacity 150 pounds (this can be lower as well so you will need to check your owner's manual to verify), so it does even the weight rating playing field between the two hitches. Both of these will require trimming to get installed, but more so with the # C13406....
    view full answer...
  • Does Curt Hitch C13406 Fit 2018 Toyota RAV4 Hybrid
    The Curt hitch part # C13406 does fit the hybrid models of the 2018 Toyota RAV4.
    view full answer...
  • Mostly Hidden Trailer Hitch Recommendation for 2017 Toyota RAV4 Hybrid
    The Curt trailer hitch part # C13406 is what I recommend for a mostly hidden trailer hitch that fits your 2017 Toyota RAV4. Only the hitch opening hangs below the rear bumper, so you get a mostly concealed look like you are looking for. I attached an install video for more info for you to check out as well. This will work really well with your Thule bike rack too. For a roof rack extender, the Rhino-Rack T-Load part # RTL002 is a really great option too. It fits this hitch and is also...
    view full answer...
  • Trailer Hitch Receiver with the Most Ground Clearance on a 2017 Toyota RAV4
    I compared ground clearance measurements for all of the 2" trailer hitch receivers we have for your 2017 Toyota RAV4 and found that the Curt Trailer Hitch Receiver part # C13406 has a great clearance from the ground to the top of the hitch receiver tube opening. When we tested this trailer hitch on a similar 2017 Toyota RAV4, we found that the distance from the ground to the top of the hitch receiver tube opening was about 15". Please, please keep in mind that 2017 Toyota RAV4 we tested...
    view full answer...
    Image 1 for
  • Where To Reinstall the Keyless Entry Sensor On A 2016 Toyota RAV4 After Curt Hitch Install
    The keyless entry sensor on your 2016 Toyota RAV4 Hybrid is located under the rear bumper on the passenger side of the vehicle. The installation instructions for the Curt Trailer Hitch Receiver part # C13406 state to move this under the cross tube of the hitch in same basic area it was removed from with cable ties. I have attached a photo for you that shows how one of our customers relocated the sensor.
    view full answer...
    Image 1 for
  • Best Hitch for a Thule Apex Bike Rack with an Easy Install on a 2018 Toyota RAV4
    For your 2018 Toyota RAV4 and your Thule Apex bike rack, I strongly recommend the etrailer Class III Custom Hitch, part # e98864. This hitch will give you plenty of clearance and allow you to access your rear hatch. It will be able to handle your bike rack with ease with its maximum gross tongue weight of 525 pounds, keeping the Apex from bouncing and sagging down on the road. It also has a matte black powder finish that will match your Apex bike rack very well. The installation of this...
    view full answer...
  • What is Weight of Curt and EcoHitch Trailer Hitches that Fit 2017 Toyota RAV4
    The EcoHitch part # 306-X7219 that you referenced weighs 42 lbs and the Curt part # C13406 weighs34 lbs so there really isn't a significant difference. Also worth noting is that the weight of hitches do not count against the towing capacity of the vehicle since essentially the hitch becomes a part of the vehicle frame.
    view full answer...
  • Hitch Mount or Trunk Mount Bike Rack for a 2018 Toyota RAV4 - Which is Better?
    The Saris Bones EX 3 Bike Rack # SA803 will fit your 2018 Toyota RAV4 but the only time I really recommend using a trunk mount rack over a hitch mount rack is when you either don't have room to store a hitch mount rack or you only plan on using it a few times a year and you don't want the expense of the hitch and a bike rack. Aside from that the hitch is 100% the better way to go since hitch racks have a wider variety of design and capability compared to trunk mount options plus the rack...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch for 2018 Toyota RAV4 for Bike Rack
    For your 2018 Toyota RAV4, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13406. This is the same size hitch receiver as anything that fits the 2001 Jeep Grand Cherokee so if your bike rack fit your Jeep it will fit this receiver as well. The hitch pin hole will be 3 inches recessed from the outer bumper on your RAV4 so even if you have a folding bike rack it will fit well. I've linked the page to all the hitch fits for both vehicles to help. There is not...
    view full answer...
  • What is Required for Trimming the Panel on my 2018 Toyota Rav4 to Fit the Curt Hitch
    When trimming for the Curt Trailer Hitch Receiver part # C13406 I generally use a razor knife. As you can see in the linked video my buddy Ryan used some snips to do the trimming. There really is nothing you can see in passing after installation unless you really bend own and look for it specifically. Again this can be seen in the video Ryan did. It is on a 2016 model but it is the same installation process. If you're going to be hauling the Tekonsha T-One Vehicle Wiring Harness with...
    view full answer...
    Image 1 for
  • Best Ground Clearance with Trailer Hitch for 2015 Toyota RAV4
    The most ground clearance offered with a trailer hitch for a 2015 Toyota RAV4 is the Curt Trailer Hitch Receiver part # C13406. This hitch has a hidden design so the receiver tube will be tucked up under the bumper as close as possible giving you the most ground clearance. It does require that you trim the fascia so you can get a tighter fit. It's still possible certain situations will require you to use caution when going up a steep incline but this hitch will be best to reduce this chance.
    view full answer...
  • Will the Curt 13406 Work For a Thule Bike Rack and Will It Still Allow Lift Sensors to Function
    I'll start off by saying that the Curt # C13406 would work just fine to carry a Thule bike rack since the hitch sticks out far enough to where the center of the hitch pin hole to the back of the bumper is going to be roughly 2-1/2"; so as long as the measurement of the center of the hitch pin hole to the closest part of the rack is greater than that you won't have to worry about it touching the RAV4. Additionally, this is a 2" Class III hitch receiver, so it's going to be well rated for...
    view full answer...
  • Recommended Trailer Hitch for a 2018 Toyota RAV4 Hybrid
    Yes, we do. I recommend Curt, part # C13406. It's a fit for all of the 2018 RAV4's including the Hybrid model like you have. I like how the crosstube is hidden behind the RAV4's bumper and all you see is the receiver tube sticking out. Take a look at the picture I attached. I've also linked the install video for you, which isn't on a Hybrid model but the install is the same. The wiring harness # HM11141820 from Hopkins gives you a 4-way to power the trailer lights. It plugs into...
    view full answer...
    Image 1 for
  • Will A Trailer Hitch Interfere With The Hands-Free Lift Gate On A 2017 Toyota Rav4 Platinum
    While installing a trailer hitch can cause some interference of the hands-free liftgate function for your 2017 Platinum Toyota RAV4, it can definitely still work. The hitch mounting location can mean that only the centrally-positioned sensor will be affected. Those to the sides of the hitch tube usually function without issue. The Curt hitch part # C13406 we have found does not interfere as much and will work fine if you kick with your feet to the sides of the hitch to engage the sensor. ....
    view full answer...
  • Availability of Trailer Hitch that Fits 2016 Toyota RAV4
    Sometimes our website does have issues which can be really frustrating but we do have hitches that fit your 2016 Toyota RAV4 like with the Curt part # C13406 which has great towing capacities and since only hitch opening hangs below rear bumper it's mostly hidden.
    view full answer...
  • What is the Hitch Height of the Curt 13406 2 Inch Hitch Installed on a 2017 Toyota RAV4
    The hitch height of the Curt # C13406 on most 2017 Toyota RAV4 is going to be 15" from the top of the receiver to the ground, but this is going to vary slightly from vehicle to vehicle depending on the suspension condition. I've linked our installation video of this hitch for you to check out as well, which details this measurement around the 1:30 mark. If you also need a wiring harness I recommend the Tekonsha T-One # 118578 which has the highest amp rating of any of the available harnesses...
    view full answer...
  • Which Hitch for 2018 Toyota RAV4 Has Best Ground Clearance
    The hitch for your 2018 Toyota Rav4 that has the best ground clearance is the Curt part # C13406 as it sits the highest and also because only the hitch opening hangs below the rear bumper which means turning into an elevation change like a steep driveway would not be affected at all since the bumper would still be the lowest part of the rear of the vehicle at the sides of it.
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Thomas T
Video by:
Thomas T
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee John S
Video Edited:
John S
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Eric H
Updated by:
Eric H
Employee Kristina F
Written by:
Kristina F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Ian F
Test Fit:
Ian F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924