Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

See what our Experts say about this CURT Trailer Hitch

• Recommended Hitch for a 2023 Honda Passport
  The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item # C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely leaving only the 2" x 2" receiver visible. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. I have linked a couple of pictures below along with an installation video so...
  view full answer...
  
• Does Trim of 2019 Honda Passport Get Modified to Install Curt Trailer Hitch
  I checked with Curt and the trailer hitch part # C13421 that you referenced does fit your 2019 Honda Passport and does not require any rear trim panel modifications. Basically the hitch just gets raised into position and from there you just bolt it into place!
  view full answer...
• Hitch for 2021 Honda Passport for Using Rhino Rack T-Load Hitch Load Assist
  Yes, the Rhino Rack T-Load Hitch Load Assist part # RTL002 can be used on a 2021 Honda Passport. You'd just need to have a 2 inch hitch installed on the vehicle as well like with the Curt part # C13421 which is a confirmed fit. I really like this hitch because it has an easier install, has great towing capacities, and is mostly hidden since only hitch opening hangs below rear bumper.
  view full answer...
• Hitch Depth Differences for the etrailer, Curt, and Draw-Tite Hitches for a 2021 Honda Passport
  The etrailer hitch item # e44AR you referenced has the same protrusion from your rear fascia as the Curt Trailer Hitch Receiver item # C13421. These hitches are manufactured by the same company and are identical except for the matte coating on the etrailer hitch over the gloss coating on the Curt. The hitch pin hole on both of these hitches sits 4" inside of your Passports bumper. The end of the receiver is online with the rear bumper of your Passport. I have linked an installation video...
  view full answer...
• Recommended Hitch for a 2024 Honda Passport
  Yes, I would be happy to! To add a hitch to your 2024 Honda Passport, I recommend the etrailer item # e44AR. This hitch is custom fit and bolts to your Honda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight. I really like the etrailer hitch item # e44AR because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. This not only looks better but helps with ground...
  view full answer...
• Curt vs. etrailer Trailer Hitch Receivers For 2023 Honda Passport
  There is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Honda Passport, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your '23 Passport are the following part numbers: - etrailer Trailer Hitch Receiver # e44AR - Curt Trailer Hitch Receiver # C13421 The matte black finish is nice as it hides the inevitable dings, scuffs and scratches...
  view full answer...
• Recommended Trailer Hitch/Trailer Wiring For A 2023 Honda Passport
  When installing a trailer hitch onto your 2023 Honda Passport I recommend The Curt Trailer Hitch Receiver # C13421. I like the Curt hitch because it has a concealed cross tube so when installed your Honda will have a clean off the factory look. The Curt hitch is manufactured in the USA. When installing a trailer wiring harness, I recommend the Curt T-Connector Vehicle Wiring Harness # C56291. This harness has a powered converter that will help reduce the strain on the wiring system and...
  view full answer...
• Trailer Hitch Receiver Fit For 2023 Honda Passport
  There is indeed a trailer hitch receiver that fits your 2023 Honda Passport, from Curt. I verified this fit directly with the manufacturer for you, with the correct part number being the following: - Curt Trailer Hitch Receiver # C13421 The # C13421 is about as easy an install as there is for a hitch, as all you have to do is lift it into place and secure it with the included bolts. This will give your '23 Passport a hitch with a 5,000 lb towing and hefty 750 lb tongue weight capacity...
  view full answer...
• What Mounting Bracket Will Secure The Tekonsha 7-Way To a 2021 Honda Passport?
  You will be able to use the Mounting Bracket # PK12711U when you install the T-One Vehicle Wiring Harness # 118291 on your 2021 Honda Passport. This mounting bracket can be bolted to your rear fascia or attached to the mounting bracket on the Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 if you are also adding a receiver. You could also use the Mounting Bracket # C58000 if you have a receiver like the Curt # C13421 and do not want to drill into your rear fascia. This bracket mounts...
  view full answer...
• Is There A Hitch That Won't Affect Liftgate Sensor Functionality On A 2023 Honda Passport
  Hi Burt, Because of the placement of the sensors compared to the position that the hitch will mount there are no trailer hitches available that won't impact the functionality in some way. Typically if you wave you foot on either side of the receiver tube you'll still be able to activate the liftgate sensors, it's just going to take a bit of playing around to find the sweet spot. For your 2023 Honda Passport I recommend the etrailer Trailer Hitch Receiver # e44AR. This hitch comes with...
  view full answer...
• Are Curt and Draw-Tite Class III Trailer Hitches for 2020 Honda Passport Hidden Behind Bumper
  Both the Curt # C13421 and the Draw-Tite # 76290 Class III hitches for the 2020 Honda Passport will install so that the hitch crossbar is concealed behind the vehicle bumper, but the receiver tube and the safety chain hooks will be visible. When the hitch is installed, the receiver tube will sit against the underside of the bumper fascia as shown in the provided photo. The main differences between the two are the weight capacity, as well as the fact that the Draw-Tite # 76290 provides...
  view full answer...
  
• Recommended Trailer Hitch With the Best Finish For A 2022 Honda Passport
  I tend to prefer the look of the American made Curt hitch # C13421 for your 2022 Honda Passport as it is less obvious than the Draw-Tite once installed. This has a black powder coat finish over a protective base coat and I have found it to hold up very nicely. This is also a very quick and easy install that will require no drilling. I do need to mention that this, as with any hitch, will limit the area of the Hands-free Liftgate sensors to either side of the receiver opening. This is pretty...
  view full answer...
  
• Does the Draw-Tite # 76290 and Curt # C13421 Install Through the Bumper of My 2022 Honda Passport?
  Both the Draw-Tite # 76290 and the Curt # C13421 are a bit different than the fitment of the OEM hitch on your 2022 Honda Passport. However, both of these hitches feature a hidden design that gives your vehicle a better look overall by avoiding any visible bulky crosstubes. I went ahead and attached a video of both of these hitches installed on a 2021 model Passport. The hidden installation on your 2022 model is virtually identical. Out of these two options, I recommend the Draw-Tite #...
  view full answer...
• Does Curt Hitch for 2019 Honda Passport Install Below the Bumper
  Yes, the Curt Trailer Hitch Receiver # C13421 for your 2019 Honda Passport will sit right below the bumper, as shown in the attached photos. It installs ridiculously easily in two steps: 1. Raise hitch into position and secure with the provided M14 bolts and 9/16" conical washers. NOTE: Weldnut cleaning may be required prior to installation. A nylon tube brush like # 814092 and some spray lubricant is all you need. 2. Torque M14 bolts to specs listed in the included installation instructions. I've...
  view full answer...
  
• Does the Curt 13421 Hitch Fit on a 2019 Honda Passport
  Yes. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13421 is a confirmed fit on the 2019 Honda Passport, and will provide you with a 2" receiver for your vehicle that is ideal for both towing and carrying hitch mounted accessories. If you're planning on towing with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For wiring, I recommend using the Curt # C56291, which will provide you with an easy to install harness with a 4 way trailer plug. For...
  view full answer...
• Tools Needed for Curt Trailer Hitch on 2022 Honda Passport
  The socket size required to install the Curt Trailer Hitch Receiver part # C13421 on a 2022 Honda Passport 2022 Honda Passport is a 22MM. I have attached a list of all other tools required for the install per Curt. - Ratchet - 6" Socket Extension - 22MM Socket - Torque Wrench - Wire Pipe Brush - Safety Glasses
  view full answer...
• Does the Draw-Tite or Curt Hitch For the 2020 Honda Passport Require Fascia/Bumper Modifcation
  The Draw-Tite Class III trailer hitch part # 76290 for the 2020 Honda Passport does not require bumper or fascia modification. The installation is simply lining the bracket holes up with the frame holes and using the included hardware to tighten it down. The other Class III hitch option for the 2020 Honda Passport Curt hitch part # C13421 does not require any fascia or bumper modification either. If you plan on doing some towing, you will need wiring. For that I recommend Curt T-Connector...
  view full answer...
• Recommended Hitch for a 2023 Honda Passport
  The best hitch for your 2023 Honda Passport is going to be the Curt Trailer Hitch Receiver item # C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it installs right below your rear bumper cover and and the only portion visible is the 2" x 2" receiver. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. So you will have plenty of ability to haul cargo in...
  view full answer...
  
• 2" Trailer Hitch to Carry a Bike Rack on a 2023 Honda Passport
  We do have a 2" trailer hitch confirmed to fit your 2023 Honda Passport. - Curt Trailer Hitch Receiver # C13421 This hitch is made in the USA, has a bolt-on, no-drill installation and has the 2" hitch receiver you are needing. The 2" receiver is the most common size used for hitch mounted accessories like bike racks, cargo carriers and ball mounts.
  view full answer...
• Will The Draw-Tite Or Curt Trailer Hitch Receiver Sit Behind The OEM Panel On a 2022 Honda Passport?
  Both the Curt Trailer Hitch Receiver # C13421 and Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 will have the cross tube that sits behind the removable cover on your 2022 Honda Passport, but the receiver tube itself will still be exposed. This does save you from having to remove the panel and store it when you are needing to use the receiver. While both the receivers are nearly identical I do prefer that the Draw-Tite # 76290 already has the tab welded on for attaching either a 4-Way...
  view full answer...
• Will the Curt Hitch C13421 Interfere With the Lift Gate Sensor on a 2021 Honda Passport
  Though the Curt # C13421 will definitely fit your 2021 Honda Passport, installing any hitch may interfere with Hands-free Liftgate sensors and functionality may be very limited or possibly lost. However, it is exceptionally rare for the use of the sensor to be completely lost. Typically you will just need to mess with it a little to find the spot where your foot will activate it and you will be good to go. If you check out the install video I included, the sensor is talked about as well.
  view full answer...
• Will Curt or Draw-Tite Trailer Hitch For My 2021 Honda Passport Install In The Bumper Like OEM Hitch
  Neither the Curt # C13421 or Draw-Tite # 76290 trailer hitch receivers you were looking at for your 2021 Honda Passport will mount through the bumper like the factory hitch would. These receivers mount just under the bumper and leave just the receiver itself visible once installed. If you are alright with that then I recommend going with the # C13421 as the absolute max possible towing capacity of your Passport based on its options is 5,000lbs which lines up with the 750lb tongue weight...
  view full answer...
  
• How Much Does the Curt and Draw-Tite Hitch for a 2021 Honda Passport Weigh
  The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76290 and Curt Trailer Hitch Receiver part # C13421 which are both fits for a 2021 Honda Passport weigh 43 lbs and 44 lbs respectively.
  view full answer...
• Hatch Clearance with RockyMounts MonoRail Solo # RKY10007 without Tilt on a 2019 Honda Passport
  While I do not have the length of your fully-extended trunk available of your 2019 Honda Passport, there is a way you can measure to know with certainty if you can fully open your trunk with the RockyMounts MonoRail Solo Bike Rack for 1 Bike - 1-1/4" and 2" Hitches # RKY10007 attached with no bikes loaded. I confirmed with RockyMounts that the cradle sits 13 inches from the center of the hitch pinhole at 15-3/4 inches high. This is the part of the rack that determines whether you can fully...
  view full answer...
  

Do you have a question about this Trailer Hitch?