bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13427
Our Price: $223.31
You Save: $149.64
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 34 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13427 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (425)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13427

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 750 lbs TW
  • 6000 lbs WD GTW
  • 750 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 750 lbs
      • Maximum TW when used with weight distribution: 750 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

13427 Curt Class 3 Trailer Hitch Receiver

Installation Details C13427 Installation instructions

This Product Fits The Following Vehicles

Weight Carrying Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
750 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
6,000 lbs.

Tongue Weight (TW):
750 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia. , Spare tire will need to be lowered or removed temporarily for hitch installation , Exhaust must be temporarily lowered for installation

Customer Satisfaction Score:

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13427

Average Customer Rating:  4.9 out of 5 stars   (425 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Sturdy hitch clean looks after installing much better than others I have seen. I found it easier to install 2 of the bolts in opposite direction 1 so I didn’t have to cut wiring cover on drivers side and 1 on right side because it was binding up when putting into hole in vehicle. Overall really nice hitch.




2020 Hyundai Palisade

I was going to purchase, and have installed, a receiver hitch locally for my 2020 Hyundai Palisade but could not find a shop that could do it in time for a weekend trip. So, I decided I would purchase this unit from and do the installation myself. I received the unit within a few days which was great. I watched the installation video ahead of time to familiarize myself with the installation process.

I must say that it was super easy, and the directions were spot on. The entire install took me less than an hour. It would be helpful to have two people when it comes time to lift the receiver into place, but I managed to do it myself. Tools needed are a ratch or open-end wrench, plastic prybar or screwdriver, and a rubber mallet.

The receiver is solid and looks great. Clearance seems the same and I have not scraped the bottom of the receiver or anything hitched to it on anything so far. I have a steep street entrance apron and have not had any problems. I mount a 4-bike platform rack on it and it goes in easy and feels solid in the receiver.
Very happy with this product and the purchase process.



One year later and still happy with this hitch. No issues at all. I use this hitch weekly for bike racks and haul a trailer once a month. The hitch has worked fine.


Excellent products. Fast shipping. Informative install videos really aid in DIY.
One note on the install though. If you put the driver's side bolts through outboard to inboard, you don't have to cut the plastic cover or bolt cover.

2023 Hyundai Palisade

As many people have probably figured out with the 2023 Palisade there is not currently available the hidden behind the panel hitch. I could not wait until Hyundai figures themselves out for a tow hitch so I went ahead with this one. It is an excellent quality hitch. I installed it by myself. A FEW TIPS: don't put bolts thru without the washers like in the video as this just adds extra steps, just put them on when you put it in place originally. You also dont have to take the furthest forward muffler holder off. Do yourself a favor and jack up the back end of it to torque the bolts and make sure you have a 19 mm box wrench because you have to have one due to space issues. Other than that it's extremely straight forward.
As far as etrailer goes: I purchased my last hitch for my previous vehicle on [online] due to price a few years ago. This time I ordered on [online] instinctively then checked etrailer and immediately cancelled my [online] order and ordered from here. The hitch was cheaper shipped with tax than the base price on [online]. There are many positives during the experience (they called within 10 minutes of me submitting my order to verify my address and email. It was purchased on the 17th and arrived on the 19th. BUT what really set them apart is the last hitch I got from [online] was just wrapped in shrink wrap and was dented and dinged horrendously, to the point where I had to hammer a portion straight for holes to line up. etrailer sent it in a hefty box, and it was secured 360 and was in perfect condition when it arrived. Their install videos are also top notch. Great experience, will buy from here going forward.


I reversed some of the 12mm bolt directions and didn't need to trim the exhaust shield on one side or the plastic panel on the other. Great product. Clean install. Fit perfectly on 2023 Palisade Calligraphy. Love that it doesn't have the tubes showing from underneath like most hitches I've seen on Palisades.

2024 Hyundai Palisade

Excellent product. Hitch fits perfectly and hardware is the correct size. Only comment is that the written instructions say that the largest wrench you will need is 19mm. The through-bolts have a 19mm head but have a 21mm nut. I think the video may mention this. I would recommend this product to anyone.

2024 Hyundai Palisade

The part fit exactly the way it's supposed to. The installation wasn't bad on my 2024 palisade. Make sure to Watch videos to help make easier


Everything fit. Great video for home installation. Looks like good quality but time will tell. A little rust spot forming from hitch area

2023 Hyundai Palisade

Absolutely impressed with e-trailer’s fast shipping and customer service. And, the system they use to show how your order is progressing through the shipping maze. Best ever, really!! The CURT hitch went on without a hitch! Many others have left tips for how to install on the 2022 Palisade. I just installed on a 2023 Palisade with no issues. The one surprise on my Palisade was that there was no trailer lights module. Or, they have moved it somewhere else as compared to where it is on the 2022 (based on some e-trailer user photos). Still, a best-in-class experience with etrailer. Well done!!

2023 Hyundai Palisade

Have not it had the opportunity to install the hitch yet but the delivery was very fast and it arrived in great condition. I have received hitch’s from trailer in the past and have all expectations that the unit will go in quickly and look great. Considering it is close to Christmas they did a great job filling and delivering the order. Well done!!


Great quality and arrived early. Easy to install after watching the video online. Perfect fit.

2023 Hyundai Palisade

Very satisfied with product information, the ordering process, delivery time, and packaging. One thing you could consider doing is supplementing installation instruction's with a level of difficulty “for each step” - this could leverage your company over competitors. Some of the installation steps were very easy, done moderate and some hard. Had i known to expect such difficulty with certain parts of the installation I would have paced myself differently and better estimated the completion time.
Very satisfied with etrailer company.

2020 Hyundai Palisade

We installed the CURT C13427 Hitch and CURT CU94FR Wiring Harness in my 2020 Hyundai Palisade. The hitch is very heavy. It takes two people to position it and put the first bolts in. Once you've got one in on each side, the rest is easy. The supplied parts were high quality and fit perfectly. The video showing how to do it on the Palisade was very good, but so too were the written instructions.

The CURT Wiring Harness was also easy to install and came with good instructions. The only thing I did different was wrap the 4 wires leading from the circuit box to the trailer plug in spiral harness wire wrap. I didn't like seeing those wires out and somewhat exposed.

I've seen the Hyundai / KIA factory towing packages. I think this combination from CURT and eTrailer is every bit as good if not better. And it cost a lot less than buying through Hyundai.

Wayne B.


One year later Im still VERY happy with this hitch and harness.

2020 Hyundai Palisade

The hitch is really good quality. It wasn't that difficult to put on especially after watching the videos. My order from trailer was packed excellent to prevent shipping damage and arrived on time.

2024 Hyundai Palisade

It was fairly easy to install. The factory installed heat shield for exhaust made it difficult to install the passenger side top bolts/washers. Had to use a long punch to tap the bolts thru and had to pry the heat shield up to get a socket wrench on the bolts.

2023 Hyundai Palisade

Hitched was delivered in front of garage instead of covered porch and was rained on. The soaking wet box had a big hole in it where the hitch part had punched through and paint chipped off. There was no packing to keep the hitch from shifting in the box. I won't know if the hitch is bent until I try to install on my vehicle. Deducted one star for poor packaging.

Etrailer Expert

Katrina B.


Im sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.


I got this for our 2021 Palisade. This looks way better than the factory hitch. They even have a massive recall on the factory hitch system. I will be buying another for our Toyota! Highly recommend!


Wish I could give this 5 stars because etrailer’s service was great and everything arrived in good condition…and fast! The hitch itself is also very nice and looks good now that it is installed. However, installing it was much more difficult than I thought it would be. Probably some of this was because I bought my 2020 Palisade used and it already had considerable rust in the built in vertical bolt openings. I really tried cleaning it with lubricant and a wire brush like recommended by etrailer, but it was still very hard to insert and tighten the bolts going into those holes.
More disappointing was that the diagram provided in the paper instructions shows the long horizontal bolts going from the middle towards the outside of the frame, but we found that it was not feasible to do this. On the muffler side, the frame had a raised lip adjacent to the posterior hole that prevented us from tightening the bolt from that side. It only worked with the nut on that side and the boxed end wrench angled to avoid that lip (the socket would not fit around the bolt head and go in flush straight into the frame.) This may have been an anomaly in the frame from Hyundai as there is no good reason that this raised ridge/lip should be so close to the bolt hole… But we had a different problem on the driver side too…if the posterior bolt was placed going outward the end had enough length that it blocked us from replacing the plastic frame cover on that side when we were all done. It worked fine when we reversed it so the head of the bolt was on the outside and snug against the frame. I didn’t look back at the video to see if it was recommended to go from outside to inside or vice versa, but the written diagram that we had while installing very clearly shows the bolts going outwards.

2021 Hyundai Palisade

I purchased this and did a self install on my 2021 Palisade about a year ago. The self install process was super easy (requires two people) and the hitch itself has worked great thus far. It's very high quality and was flawless. I would definitely recommend.

Etrailer was great to work with as always.

2020 Hyundai Palisade

5 STAR +++ rating. had the lowest price I found on the Internet and Super FAST shipping!!! I ordered the hitch on Saturday morning and received it on Tuesday before noon. It arrived in a heavy duty carboard box with no shipping damage. Install was pretty simple, except for torqueing down the bolts on the exhaust side. Took one to hold a wrench and one to Tighten the nut. However, for being 67 years old I was pretty happy I could handle the install with a little help, especially lifting it into place(with help) and putting the first couple of bolts through the frame on each side. I like the clean hidden look much better than the Hyundai factory hitch. I added the 4 wire connector bracket to the bottom of the bumper cover by drilling two 3/16" holes in the lower black trim and attached with #10 1/2" bolts and nuts. I like the way that everything looks and no wires hanging down. I did reverse the bolt on the driver's side that was not able to go through because of a plastic piece being in the way. Overall I very pleased with the Curt hitch and with


This hitch was a snap to install in our driveway with common hand tools plus a torque wrench!

2020 Hyundai Palisade

This hitch looks miles better on our Palisade then the factory version from Hyundai. The receiver is all that hangs below the bumper, which affords a clean look. I wanted 7pin wiring, so I ordered the T-one wiring harness (118784), curt 4 to 7 pin adapter (C57672), and the curt long mounting bracket (C57202). I made a 90 degree bend in the mounting bracket 1.5 inches from the end and mounted it vertically off the hitch. This resulted in a factory look with 7 pin wiring. The vehicle is equipped with a wiring harness capped behind the rear bumper cover behind the left rear wheel. There is full 12v trailer power, ground, left turn, right turn, brake, running lights, and and extra wire that I assume is reverse lights. The t-one harness used all but the extra wire, so I was able to tap into the wires in the t-one harness for power and ground on the 7 pin. I didn’t have to touch any wires on the vehicle prior to the harness. Install was easy, besides the required bend in the wiring mounting bracket.


Product has been great, we had it installed at a local installer and have had zero issues with this hitch. I have seen different after market hitches on other Hyundai Palisades and the Curt Trailer Hitch looks much better.

2020 Hyundai Palisade

Easy install with minimal tools. Looks great and I love that the bar is hidden and only the receiver is visible. I think I like it better than the factory tow package I’ve seen.


This trailer hitch is exactly what u was looking for for my Palidade. The quality and price is absolutely a no brainer. I almost spend a fortune on OEM before I found Curt class III for my Palisade. Installation was also a breeze after watching the video. Everything fits perfectly and the only thing visible is the 2" tube. I am completely satisfied with my purchase. I highly recommend this trailer hitch to all Huyndai Palisade owners.

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Does Installing The Curt C13427 On My 2022 Hyundai Palisade Require Any Drilling Or Trimming?
    Installing the Curt # C13427 on your new 2022 Hyundai Palisade will not require any drilling to get fully installed. With that said, there is a very minor, and I do mean very minor, trimming that may be needed to get a panel reinstalled after the hitch is in place. This doesn't actually have to be done all the time, but I did include an install video we did showing what you will need to do if trimming does need to be done on your Palisade.
    view full answer...
  • What Does Curt Hitch for 2021 Hyundai Palisade Weigh
    The Curt hitch part # C13427 that you referenced weighs 34 lbs.
    view full answer...
  • Does Heat Shield Need To Be Removed To Install Curt Trailer Hitch C13427 On 2021 Hyundai Palisade?
    You do not need to remove the heat shield to install the Curt Trailer Hitch Receiver # C13427 on your 2021 Hyundai Palisade. Based on the picture you provided it looks like the hitch is pretty close to the heat shield, but you can use the handle end of a hammer or something similar to push and bend the heat shield to clear the hitch. I included a video of the # C13427 being installed on a 2021 Hyundai Palisade for you to take a look at.
    view full answer...
    Image 1 for
  • Does Curt Traile Hitch Fit 2024 Hyundai Palisade Calligraphy Night
    Yes it will; I checked with Curt, and according to them all models of the 2024 Hyundai Palisade are compatible with their hitch: - Curt Trailer Hitch Receiver # C13427 So it will indeed fit your Calligraphy Night Edition.
    view full answer...
  • Solution for Hitch Install Where Weld Nut Broke in Vehicle Frame
    Sounds like you broke the weld nut in the trailer frame of your vehicle as you were torquing the hitch bolts down. Normally this doesn't happen but if the torque wrench used is out of calibration it's easier to do. One solution would be to weld the weld nut back in place so you can tighten the nut or you could fishwire in new hardware. I attached a video that demonstrates fishwiring for you to check out. I also attached a link to a page with all of our bolt leaders we offer as well.
    view full answer...
  • Can A Hitch From A 2021 Palisade Fit A 2022 Palisade
    Yes it will fit, the current model/generation is 2020 to present and the Palisade will get a generational redesign in 2025. If you are looking at a hitch receiver like the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13427 It will fit on your 2022 Hyundai Palisade.
    view full answer...
  • Hyundai Palisade Dealership Class III Hitch Capacity
    A hitch installed at the dealer is likely an aftermarket hitch. If your owner's manual states 350 lbs. VCW that is the number you want to use as the rule. There should also be a stated towing rating in the manual that you will want to use as your guide for the maximum trailer weight. While there is no real way to tell exactly what that hitch on there is if the dealer installed it and gave you zero information about weight ratings they are obligated to cover it up to what is stated in...
    view full answer...
  • Trailer Hitch Receiver for 2020 Hyundai Palisade Limited
    The 2020 Hyundai Palisade Limited does not come standard with a trailer hitch receiver, that is something that is an option - and an expensive one at that. To add a trailer hitch to your 2020 Palisade you will save yourself a big expense with an aftermarket trailer hitch, the Curt Trailer Hitch Receiver # C13427, which I confirmed with the manufacturer does fit your vehicle. This hitch is a bolt-on installation so no drilling is needed; this is something that most people are comfortable...
    view full answer...
  • Which Trailer Hitch Should I Get For My 2022 Hyundai Palisade
    The main difference between the Curt Hitch # C13427 and the Draw-Tite Hitch DT32RR is that the Curt hitch has a higher tongue weight rating. I recommend going with the Curt hitch just for that reason and that it is made in the USA.I recommend checking your vehicle's manual to make sure you do not exceed the capacity of your vehicle. I attached a install video link below.
    view full answer...
  • Trailer Hitch that Fits 2022 Hyundai Palisade that Allows Spare to be Stored Underneath
    We had the chance to install the Curt hitch part # C13427 on a 2022 Hyundai Palisade like yours and we were able to keep the spare underneath it like you can see in the attached picture and install video.
    view full answer...
    Image 1 for
  • Correct Trailer Hitch Fit for a 2023 Hyundai Palisade
    I checked with the manufacturer and was able to confirm the fit for your 2023 Hyundai Palisade is the Curt Trailer Hitch Receiver # C13427.
    view full answer...
  • Availability of Replacement Hardware for Curt Trailer Hitch # C13427
    Yes we have replacement hardware for all of the hitches we carry with the part # RHK which you'd just need to enter the part number of the hitch you have and we'd ship you out the correct hardware.
    view full answer...
  • Solution for Hard to Thread Hitch Install Bolts of 2023 Hyundai Palisade
    This a very common problem even on newer vehicles like yours. The solution is to either made a thread tap like you mentioned or get one from a hardware store to clean the threads out. You can also try wire brushes and other similar solutions but the thread tap gets it done the easiest and would be what I would recommend.
    view full answer...
  • Are Aftermarket Trailer Hitches for Hyundai Palisade Approved by Manufacturer
    We do have a selection of trailer hitches available that are specifically designed to fit your 2021 Hyundai Palisade, but I think your question is more specific to any potential warranty issues with Hyundai when it comes to installing one of these. The good news here is that when installing aftermarket products like trailer hitches on your vehicle, you're covered by what is known as the Federal Magnusson-Moss Warranty Act. In simple terms this basically says that a manufacturer cannot...
    view full answer...
    Image 1 for
  • What is the Maximum Weight I Can Transport with the Curt Cargo Basket # C18150 with the # C13427?
    With your 20 x 59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs # C18150 and your Curt Hitch - 2" # C13427 on your 2022 Hyundai Palisade, you will be able to use the full 500 pound weight capacity of the cargo basket given you are not using any hitch extender or dual hitch adapter on your hitch. Since the measurement of the end of the basket to the center of the hitch pinhole of the basket does measure 31-13/16 inches long, Curt constructed the basket to accommodate the full 500 pounds...
    view full answer...
  • Highest Capacity Hitch for a 2023 Hyundai Palisade
    The highest capacity hitch for your 2023 Hyundai Palisade is going to be the Curt Trailer Hitch Receiver item # C13427. This hitch is custom fit and bolts to your Honda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. The towing capacity can be increased to 6,000 lbs when used with a weight distribution system. This is our highest rated hitch available for the 2023 Palisade. I have linked a couple...
    view full answer...
    Image 1 for
  • Easy to Install Brake Controller for 2021 Hyundai Palisade
    At this time (September 2020) we are not aware of any brake controller install harnesses on the 2021 Palisade but we do have the very easy to install Curt Echo Mobile part # C51180 which plugs into an active 7-way and once synced to a smart phone is ready to tow.
    view full answer...
  • Recommended Trailer Hitch and 5-Way Wiring Harness for 2022 Hyundai Palisade
    I recommend the etrailer Trailer Hitch Receiver # e95ZR for your 2022 Hyundai Palisade. This Class III hitch has a maximum gross trailer weight of 5,000 lbs and tongue weight of 750 lbs. It has a concealed cross tube which gives it a factory look, and also has a matte black finish which helps hide dirt and dings. For wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118784. This plugs directly into existing wiring and will give you a 4-way connection at the back. Once this...
    view full answer...
  • How to Determine Correct Rise/Drop for Ball Mount on 2022 Honda Palisade Limited
    The correct rise/drop for a ball mount on your 2022 Honda Palisade Limited depends on the trailer you will be towing. In order to determine this you will need 2 measurements. The first is the hitch height and the second is the coupler height. It is also worth noting that the rise and drop on the ball mount are measured from the top of the shank to the top of the ball platform. The hitch height is the distance from the ground to the top of the receiver opening. For the # C13427 that measurement...
    view full answer...
  • Recommended Hitch And Wiring For A 2024 Hyundai Palisade
    Yes, Curt has confirmed that the Curt Trailer Hitch Receiver # C13427 is going to be a compatible fit for the 2024 Hyundai Palisade. For the wiring you'll need the Curt T-Connector Vehicle Wiring Harness # C43FV. This wire harness has easy plug-in connectors for a fast installation. You'll just need to run a power wire up to the battery for the control module and the ground wire directly to the frame of the vehicle. If you plan on completing the installation yourself then I recommend...
    view full answer...
  • Trailer Hitch Receiver & Wiring For 2024 Hyundai Palisade
    We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver # C13427 - T-Connector Vehicle Wiring Harness # C43FV
    view full answer...
  • Curt Trailer Hitch Receiver For a 2023 Hyundai Palisade
    We do have the Curt Trailer Hitch Receiver # C13427 which is confirmed to fit your 2023 Hyundai Palisade. For the wiring you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496. Hyundai removed the factory style connector used on previous years from models which do not have the factory tow package. This ModuLite will allow you to tie into the tail light wiring to add a 4-way flat connector. The Curt Mounting Bracket # C58001 will allow you to secure...
    view full answer...
  • Comparing The etrailer Hitch And The Curt Trailer Hitch For A 2023 Hyundai Palisade
    When it comes to installing a trailer hitch onto your 2023 Hyundai Palisade the only difference between The Curt Trailer Hitch # C13427 and The etrailer Hitch # e95ZR is the finish on the hitches. The Curt hitch has a glossy finish and the etrailer has a matte finish. Out of the two hitches I recommend The etrailer hitch # e95ZR because its matte finish will help hide scratches and dings after installation from road debris. I linked an installation video link below of the etrailer hitch...
    view full answer...
  • Recommended Hitch for a 2022 Hyundai Palisade
    I would be happy to help you. Both the Curt hitch item # C13427 and the etrailer item # e95ZR are identical hitches except for the powder coat. They each weigh 34 lbs and are confirmed to fit a 2022 Hyundai Palisade. They each have a 5,000 lbs towing capacity and a 750 lbs tongue weight. Out of these two hitches, I recommend the etrailer item # e95ZR. This hitch has a matte powder coated finish that blends in nicely when installed. The finish also provides great rust protection.
    view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Bradley B
Test Fit:
Bradley B
Employee John A
Test Fit:
John A
Employee Kristina F
Written by:
Kristina F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924