Curt Trailer Hitch Receiver - Custom Fit - Class V - 2"
(326 reviews)
Price: $306.03
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class V - 2"
Item # C15302
Retail:$531.95
Our Price: $306.03
You Save: $225.92
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (326)
- Q & A (0)
- Photos
- Why etrailer?
CURT Trailer Hitch - C15302
- Class V
- 2 Inch Hitch
- 16000 lbs GTW
- Visible Cross Tube
- CURT
- 2400 lbs TW
- 17000 lbs WD GTW
- Custom Fit Hitch
- 2400 lbs WD TW
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum GTW when used with weight distribution: 17,000 lbs
- Maximum tongue weight: 2,400 lbs
- Maximum TW when used with weight distribution: 2,400 lbs
- Maximum gross trailer weight: 16,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15302 Curt Class 5 Trailer Hitch Receiver
Replaces 15321
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2010 GMC Sierra 2500 - 6-1/2 Foot Bed
- 2001 - 2006 GMC Sierra 2500 HD - 6-1/2 Foot Bed
- 2007 - 2007 GMC Sierra Classic 2500 HD - 6-1/2 Foot Bed
- 2007 - 2007 GMC Sierra New Body 2500 - 6-1/2 Foot Bed
- 2008 - 2010 Chevrolet Silverado 2500 - 6-1/2 Foot Bed
- 2001 - 2006 Chevrolet Silverado 2500 HD - 6-1/2 Foot Bed
- 2007 - 2007 Chevrolet Silverado Classic 2500 HD - 6-1/2 Foot Bed
- 2007 - 2007 Chevrolet Silverado New Body 2500 - 6-1/2 Foot Bed
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not fit
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V - 2" - C15302
Average Customer Rating: 4.9 out of 5 stars (326 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Mike07/29/2022
The hitch was an excellent fit. The only drawback is that there’s not a spot to mount the trailer plug I see where other people have welded something on it would just be nice if it had it. I plan on buying a bracket and mounting it to my bumper. It took about 30 minutes to install once I had all the tools together. Looks great
by: Alex Y.07/16/2022
2008 Chevrolet Silverado
Direct bolt on. Make sure to keep hardware from old hitch if doing replacement like myself this utilizes 2 bolts from factory. Very easy install. Definitely a nice upgrade from my rusted into pieces factory hitch. Could tel right away it was good xonstruction weighs about twice as much as factory hitch. We'll see how she pulls soon.
by: Adam12/23/2022
Pretty nice upgrade to match truck’s real towing capacity.
by: Luke05/21/2020
Arrived 3 days free shipping....
Installation a snap although we have a lift !
Appreciate the bolt stays so it can be installed by just tightening but on underside no wrench on top needed !
Used on a 2005 Silverado 2500 with 6.6 Dura
Also included pic of original equipment ....broke 15 years later and much WORK
Comments
Product is great after 1 year no ptoblems !!!
Luke - 05/23/2021by: Nick04/15/2022
Does not fit exact on 2004 chevy Silverado 2500hd crew cad. Drilling required. Maybe other trucks for whatever reason it fits but mine does not. Hitch itself looks great
by: Ted 11/29/2022
Great product. I have put 3 on different trucks. All have been awesome bolt on hitches. Highly recommend these.
by: Bill F07/08/2021
2002 Chevrolet Silverado
This hitch is beefy and nice, love the looks and will be a big upgrade from my factory one that was starting to rip at the welds.
Comments
Still an amazing hitch
Bill F - 07/14/2022by: Eric 10/22/2022
2003 Chevrolet Silverado
Installed on a 2003 Chev 2500HD. Very strong well made receiver hitch. Easy to install however it did not use the same holes from the stock hitch. Did not have to drill. Bolted on with 6 bolts instead of the 8 bolt original. Did not bolt onto the bumper. Approx 13-14 lb heavier than original hitch. The receiver is set back 1" from the bumper so no shin buster.
by: Steve 01/18/2023
This was an easy install with an impact.
(Forgot to clean the dirt on top of the frame rail
so had to remove bolts and reinstall them!)
and torque to specs
by: Michael 01/25/2023
Beefy well built hitch. Nice finish, nothing bad to say.
by: Max 11/18/2022
Vast improvement over the factory hitch. Fit perfect only took about 20 minutes to swap out. My factory hitch was nearly ripped off hauling my skid steer. This hitch has been holding up just great for a year now.
by: Sean P05/29/2022
Awesome hitch! Makes the oem look like a plastic toy. Easy install, I can't think of anything negative about this product. Will out last the truck it's bolted to!
by: Charles12/22/2022
I had originally purchased the wrong product. An etrailer agent was extremely helpful and was able to return the product and order the correct one in a expedited manner.
by: Dustin 12/03/2022
It’s a beast. Puts the factory to shame. I also used it to take the truck from 2 1/2” to 2” because I have invested quite a bit in 2” hitches over the years.
by: Ken 11/04/2022
2007 GMC Sierra
I just got it delivered and I will install it on my nephews truck in the next few days. The hitch looks very well built compared to the hitch on my 2007 GMC Sierra 2500HD. I would buy this receiver for my truck if I needed one.
by: Steve 08/08/2022
Nicely made. Factory one was whimpy and weak looking. I pull a 10k trailer everywhere. Hitch safety chain hookup is large enough to get my oversized hooks in. Over all I'm happy with it.
by: Steve 07/22/2022
2007 Chevrolet Silverado Classic
Fasteners too short!
First, I removed the original bumper and receiver hitch. Then i installed an ETrailer supplied OEM rear bumper with supplied fasteners. Then I proceeded to install the Curt trailer hitch receiver. To install the receiver, the rearmost fasteners of the bumper had to be removed, the receiver located for installation and then those same fasteners re-installed to secure both the bumper and receiver in place. Wouldn’t you know that the rearmost fasteners for the bumper (fasteners that had to be removed for receiver installation) were TOO SHORT to engage the fixed nut on the truck frame with both receiver and bumper installed. Fortunately I had saved the original rearmost fasteners and THOSE were just long enough to engage the fixed nuts’ threads. By rights I should buy similar nuts that are 1/2 inch longer to have adequate thread engagement. Just an unanticipated p.i.t.a.
Other than that, it fit up nicely.
by: Shawn 08/08/2022
The process was painless and shipping was quick. Product was exactly as described. Fit was correct, had to modify exhaust hanger as this beefier hitch rubbed the exhaust pipe.
by: Geoff 08/12/2022
2006 Chevrolet Silverado
Just installed the hitch last night, very easy install everything lined up perfectly from where the factory hitch was removed. Appears to be a excellent quality/build, I have not used the hitch yet so cannot speak to that yet. Only complaint I have is it does not have the electrical connector bracket, but in their defense I didn't see any on the competitive brand either.
Etrailer is top notch excellent service extremely fast shipping!!!
by: Jason11/21/2021
It fit so nice on my 2004 duramax. I also did the newer style bumper with the steps and it worked perfectly.
by: Darrell 04/21/2021
My Curt trailer hitch works great, no sagging with a heavy load on the farm. Installation was pretty good with a tight fit on the frame. Much heavier than the OEM hitch.
Comments
After a year my hitch is holding up good, no problems.
Darrell - 04/22/2022by: Colin 09/09/2022
Bolted up incredibly easy. The thought out hardware selection and figment was perfect. ROCK SOLID part, we’ll made, assembled, and packaged. Hopefully will never have to buy another hitch but if I do it’ll be this one
by: Timothy 10/29/2022
Delivered on time. Installation lined right up with original manufacturers bolting pattern.
by: Louis 11/28/2022
2005 Chevrolet Silverado
Website was easy to query for applicable product for the desired vehicle. Product was as described with installation also being correctly indicated.
by: Gregory 11/30/2022
Very good insulation was easy fit to factory mount perfect!
25
326
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Height Difference Between Curt C15302 and Factory Chevy 2006 2500hd ReceiverThe Curt Hitch part # C15302 will fit very tight to your rear bumper. It would be hard for me to venture a guess as to how much higher it would sit than your factory hitch. But I can give you a way for you to figure it out. When installed, the # C15302 will sit 2.625 inches below the mounting surface it attaches to on the frame of your 2006 Chevy Silverado. You can compare that to the same dimension for your factory hitch to determine the hitch height difference. If you find that you...
view full answer... - Will Curt Class V Trailer Hitch Receiver # C15302 Fit with Oversized 285mm Width Spare TireAccording to my technical contact at Curt Manufacturing their Class V Hitch # C15302 will fit your truck, if it were equipped with a standard 265mm wide spare, with about an inch of extra space. The hitch was engineering with this tire size in mind. With your wider 285mm tire there will be no space between the tire and hitch. The hitch may still bolt up but not without at least contacting the tire.
view full answer... - How Many Bolts are Used to Install the Curt Hitch C15302There will be a total of 6 fasteners that will be used to install the Curt Hitch part # C15302. Four come with the hitch and the other two are bolts that are in the truck's frame currently. That is why there are only 4 bolts in the product pictures that the hitch comes with and 6 holes on the hitch.
view full answer...
- Why Does a Factory Class V Hitch on a GMC Sierra have Lower Capacities than Aftermarket HitchesMost aftermarket Class V hitches will have higher ratings than factory hitches. Most aftermarket hitches have higher ratings than the vehicles they are designed for. Since your hitch is factory GMC probably just decided to put the rating that the vehicle has instead of just the hitch so as not to confuse people. Going with a hitch with a higher rating than what the vehicle is rated for would not give you additional capacity. You are only as strong as your weakest component. With that...
view full answer... - Does Curt Trailer Hitch # C15302 Have Same Ground Clearance as Factory HitchIf you check out the picture I attached you can see that the hitch opening for the Curt # C15302 that you referenced tucks right up under the rear bumpers so it would give you the exact same ground clearance as your current hitch. Which means your current ball mount would work well too.
view full answer...
- What Part of Trailer Frame Does Curt Hitch # C5302 Attach to on 2002 Chevy Silverado 2500HDThere are quite a few holes on the frame of your 2002 Chevy Silverado 2500HD short bed that hitches can attach to like the Curt you mentioned part # C15302. This is why the hitch fits for your truck have a few different bolt hole variations. I attached a picture that shows the holes that this hitch uses to attach for you to check out so that you can see that it will install properly.
view full answer...
- How Far Apart are the Bolt Holes on the Curt Trailer Hitch Receiver # C15302The bolt holes on the Curt Trailer Hitch Receiver # C15302 sit across from each other 39" on center and are separated front to back by 7-1/2" on center. This is a custom fit for the following vehicles: 2008 - 2010 GMC Sierra 2500 - 6-1/2 Foot Bed 2007 - 2007 GMC Sierra New Body 2500 - 6-1/2 Foot Bed 2008 - 2010 Chevrolet Silverado 2500 - 6-1/2 Foot Bed 2007 - 2007 Chevrolet Silverado New Body 2500 - 6-1/2 Foot Bed 2001 - 2006 GMC Sierra 2500 HD - 6-1/2 Foot Bed 2007 - 2007 GMC Sierra Classic...
view full answer... - Higher Capacity Trailer Hitch Recommendation for 2009 Chevy Silverado 2500HDFor a 2 inch hitch confirmed as a fit for your 2009 Chevy Silverado 2500 short bed that has a 16k capacity we have the Curt hitch part # C15302 which would work well. It's a 2 inch hitch too so you wouldn't have to keep using the hitch reducer you mentioned that's adding the play and movement you noted.
view full answer... - Trailer Hitch Recommendation for 2002 Chevy Silverado with Factory HitchFor your 2002 Chevy Silverado you will need to go with a hitch that will fit trucks that do have a factory trailer hitch. For that you would want the Draw Tite hitch part # 41944 which will fit your truck once you remove the factory hitch. This attaches to bumper brackets near the frame but not to the bumper itself.
view full answer... - Does Curt Class V Hitch C15302 Have Reinforced Hitch Pin HoleThe receiver tube on the Curt Class V hitch # C15302 does not have any reinforcement around the hitch pin hole. I went to our warehouse and checked this hitch to be sure. When this feature is included on a hitch it will usually be easy to see since it will be on the outside of the receiver tube. So long as you remain within the hitch and vehicle towing capacities and use the correct size hitch pin or lock you should not experience any rounding-out of the hitch pin hole on this Curt hitch.
view full answer... - Class V Trailer Hitch Recommendation for 2005 GMC Sierra 2500HD Short BedFor your 2005 GMC Sierra 2500HD short bed the Curt Class V hitch part # C15302 is a confirmed fit and would work well. It has towing capacity of 16,000 lbs which would be more than what your truck is rated for.
view full answer... - Curt Hitch for 2006 GMC Sierra with High Towing Capacities and Fits with Larger SpareThe Curt hitch part # C15302 which fits your 2006 GMC Sierra 2500 would occupy the same amount of space as your factory hitch so if your current spare fit with it would also fit with this hitch.
view full answer... - Does Spare Tire Get Removed When Installing Curt Trailer Hitch C15302Yes, the spare tire will get lowered - but only temporarily - when you are installing the Curt Trailer Hitch Receiver # C15302. After you complete the install and torque the bolts down of the Curt Hitch # C15302, you will then raise and reinstall the spare tire so it will ultimately stay put.
view full answer... - Class V Trailer Hitch that Fits 2001 Chevy Silverado 2500HDThe Curt Class V hitch part # C15302 is a confirmed fit for your 2001 Chevy Silverado 2500HD and would work great. It has a 16,000 lb trailer towing capacity and has a 2 inch opening.
view full answer... - Does The Curt Receiver C15302 Not Require The Bumper Mount Bolts on a 2009 Silverado 2500HD?Yes, the Curt Trailer Hitch Receiver # C15302 does not have the bolt holes that also secure it to the bumper on your 2009 Chevrolet Silverado 2500HD with the short bed. This is fine as the construction for this receiver is much stronger than that on your factory receiver. And it is designed to work on trucks that both came with a factory receiver as well as ones without a factory receiver.
view full answer... - Curt Class V Hitch for 2001 Chevy Silverado 2500 HD 6-1/2' Bed Does Not Line Up with Factory HolesIn regards to the Curt Trailer Hitch Receiver part # C15302 which is a fit for a 2001 Chevrolet Silverado 2500 HD - 6-1/2 Foot Bed, there are only two factory weld nuts in the frame which get reused, they are the two closest to the bumper. The other four holes are secured with carriage bolts using pre-existing holes in the frame which you can see from the diagram below.
view full answer...
- Does Install of Curt Hitch # C15302 Require Using Factory Install BoltsWhen installing the Curt hitch part # C15302 you do need to reuse the factory 14 mm bolts that the factory hitch was using but since you have lost yours you could get replacements from a dealer or find matching bolts at a hardware store.
view full answer... - Hitch Recommendation for a 2004 Chevy Silverado 1500 for Towing a 6,000 lb TrailerIt never hurts to have more hitch capacity than needed. The correct Class V hitch for your 2004 Chevy Silverado 1500 though is the Curt Hitch part # C15323. This hitch would work great to tow your 6,000 lb trailer. However, you also need to check the owners manual of your truck to determine what Chevy lists as the capacity for your vehicle and be sure not to exceed the lower of the two capacities (hitch capacity vs. vehicle capacity) as your setup is only as strong as the weakest component...
view full answer... - Hitch Recommendations for a 2003 Chevy SilveradoThe biggest difference will be capacity. The Curt Hitch part # C15302 that you referenced is on the high end of the capacity spectrum. It's a Class V hitch that has the following capacities: Maximum gross trailer weight: 16,000 lbs Maximum GTW when used with weight distribution: 17,000 lbs Maximum tongue weight: 2,400 lbs Maximum TW when used with weight distribution: 2,400 lbs On the opposite end of the capacity spectrum is the Curt Hitch part # 13208 which has the following capacities: Maximum...
view full answer... - Trailer Hitch Fit Recommendation for 2000 Blue Bird CV200We have only one hitch that I can guarantee will fit a 34-1/4 inch I-beam frame. For that you'd want the part # 13703 which can fit basically any frame style between 22 and 72 inches apart.
view full answer... - Location of Curt Hitch C15302 on a 2003 Chevy Silverado 2500 Short Bed and 7-Way Mounting BracketWith Curt Trailer Hitch Receiver # C15302 installed on a 2003 Chevy Silverado 2500 short bed the hitch will be in the same position as a factory hitch or at least within a fraction of an inch. By that I mean the receiver will be right under the rear bumper. To mount your 7-Way connector I like mounting box # 18159 for a clean look. I have linked a video of it for you. I have included a link to all of the 7-Way mounting devices we have.
view full answer...
- Trailer Hitch Recommendation for 2016 GMC Savana Van with 1,200 lb Tongue Weight CapacityFor your 2016 GMC Savana Van 3500 we have the Reese Hitch part # 41946 as a confirmed fit that has a 1,200 lb tongue weight capacity. As long as you are sure your trailer has at least the same capacity this would fit and work well.
view full answer... - Class V Trailer Hitch Receiver Rated For 15,000LBS That Will Fit a Frame With Mounting Holes 31.75I recommend the Class V Universal Weld-on Receiver Hitch # 15901 as I cannot locate a custom fit receiver with those measurements. This receiver will fit frame widths from 18" to 43.88" and has the maximum trailer weight rating of 15,000lbs and maximum tongue weight of 1,500lbs.
view full answer... - Curt Hitch Recommendations for a 2006 Chevy Silverado 2500HDAs long as you have a 6-1/2 ft bed on your 2006 Chevy Silverado 2500 HD the Curt Hitch # C15302 will work for you. If you have an 8 ft bed you would want a Curt Hitch # C15313.
view full answer...
Do you have a question about this Trailer Hitch?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer hitch information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.