To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (206 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.It was an exact fit. I'm 60 and with a couple of jack stands I had it in stalled in less than an hour. Instructions didn't mention it but I also used blue loctite on the bolts and the 7 pin/4 pin connector did not have any holes to connect it so I drilled 2 holes 1/4" into the hitch used original bolts and a nut driver to get them in place. Most people would not have that mechanical knowledge so in future there should be pre drilled holes for that. Overall good experience.
I didn't find any information on this site regarding if this would fit under a ranch hand bumper replacement. But luckily it did. It mounted right up as stated. I believe my spare tire is stock, and that also fit right back into place. The hitch has much more beef to it than stock. I haul a lot of different heavy trailers, both bumper pulls and goosenecks, can't wait to see how this unit works out.
Very pleased with the hitch and fast shipping. I installed by myself in less than an hour. My pics show how to use 3 pieces of rope to lift and hold without hardly any physical lifting on my part. One rope at the rear up to the bumper a one on each front bolt hole to the front bolt hole in the truck frame. Just keep shortening the ropes until it’s tight to the frame and install bolts. Very easy. Factory spare tire still fits.
Hitch is fine. The box/shipping materials however were DEE-STROYED in transit. Never seen anything like it before. I know it's a large, heavy piece but it could do with a little better packaging
Price is perfect, shipping was fast! As others have noted, the box arrived a little beat up. But that is to be expected with a heavy chunk of steel inside a cardboard box. Contents were packaged so there is no chance of missing parts.
Installation wasn’t bad. Use a large breaker bar or a heavy duty impact wrench to remove factory bolts. 350,000+ mile F350 from the rust belt came off with some muscle. This hitch lines up perfectly utilizing the Ford factory centering nubs.
One thing to note is that this hitch will require lowering your spare tire as it has a straight square tube instead of Ford’s factory bent tube that wraps around the spare tire. See pictures.
Installation for me took a little over 1 hour due to a lost security key for the spare tire winch. Ended up deciding to cut the winch cable and replace the winch. With a heavy duty impact wrench and the ability to lower your spare tire, complete installation should take no more that a half hour.
Tyler
12/14/2019
Fantastic!
This hitch is a beast! Way bigger than it looks in the picture. Lots of thick metal everywhere. Was beat to hell by the shipping company and will need some touch up paint in several locations. Otherwise very impressed
It went on fairly easily, and hasn’t broken or fallen off. It was a direct replacement for the factory one that rusted out.
Solid hitch , no problems gets the job done. F250 powerstroke towing 14k trailer almost everyday for the last year
I replaced my 05 F350 hitch that had rusted out on the back side, the hitch arrived on time and to my surprise was even better than the one that came with the truck. Great hitch, Great price, Great service. Thanks etrailer
I couldn't be happier with the hitch and etrailer. I was a bit worried about putting a class V hitch on myself. I thought with the weight I sometimes tow, I really wanted it done right. Every truck I've bought before already had the hitch on it. I watched a video etrailer had that actually was on a 2006 F350 Super Duty and with that being the truck I have I was really lucky to see how easy they made it look. I was a bit concerned about the weight over my head, and thought I'd check the cost of having a shop nearby put it on, before ordering it, and they told me I couldn't even get a hitch since my truck was built as an incomplete truck to be finished with utility boxes by Monroe truck. He was also concerned about the Tommy Liftgate that was added after Monroe truck finished building it. He just didn't measure correctly, assuming my frame was wider than standard.
Anna, at etrailer assured me the one I wanted would fit, helped me with the order and got it to me in 3 days. She was right, it fits great and it was a breeze to install. I used a motorcycle jack, with a bungee cord attached to the jack, holding a ball receiver I put in, to keep it more or less straight as I lifted it into place. I think the actual time it took me, installing it by myself, was just about an hour. I highly recommend etrailer for their service from before ordering, with their informative videos, the willingness to answer all your questions, getting the item to you quickly, keeping you informed about the order's status, and then being pro-active in volunteering to help
Installed very easy. Very stout. Poor box it was shipped in was beat up. Could have expanding foam to keep the hitch from moving and beating up box. As stated in some reviews, the stock location for the electrical connection for the trailer could not be used. I just drilled a hole in the bumper above stock location to mount the trailer plug. This will keep the plug out of the way. See picture.
Excellent hitch, looks good.Allows me to tow my 10K dump trailer.Super easy 2 person swap with a floor jack. Wife drove the floor jack.
I Love it , For the tow rating i wish it would have had a 2.5 to 2 inch reducer built in. It comes with only a 2 inch sleeve.
Instal took 5 minutes with help from a friend.The hitch fit perfectly and I would assume this one will last as long as my first one- 20 years. Customer service was outstanding, they had a computer glitch the day I tried to order so called in. Martha took care of the entire order, she did a great job! Great company to work with and will do so again.
This hitch receiver was a direct fit for my 2000 F250. It took about 40 minutes to complete the whole job, and I definitely recommend having a helper. Other wise the job would have taken much longer.
I was amazed at how much bigger the curt receiver hitch is compared to the factory hitch. Definitely worth the purchase.
Great. Had a problem with shipping but they handled it correctly and I satifyed Thanks
Hitch was received in a very timely manner. Quality of construction is excellent. I have no doubt it will handle the 2000 plus rated tongue weight. Installation was a snap, fit was perfect, a one man job and done in about 45 minutes.
MOST OF THE TIME WAS REMOVING THE OLD HITCH, THE BLUE LOCKTITE FORD USED IN 2006 WORKS REALLY WELL. I WAS WORRIED THAT THE 20 INCH SPARE WOULD NOT FIT WITH THE MASSIVE SIZE OF THE NEW HITCH, BUT IT CRANKED RIGHT BACK IN PLACE. INSTALLED IN 30 MINUTES AFTER AND HOUR GETTING OFF THE OLD HITCH.
VERY PLEASED.
Easy to find product, quick delivery time. Bought a class 5 hitch, Got it in 3 days. Definitely buy from etrailer.com again!
This hitch improved my trucks towing capacity by almost double. I also feel a lot safer towing down the highway in my rig.
GREAT PRODUCT FOR THE RIGHT PRICE. EASY TO NAVIGATE WEBSITE. DESCRIPTION OF PRODUCT IS WELL DEFINED
Fit excellent under the stock bumper. The dually has towed 10K with no problems and no sway control.
Bolted up perfect.. 10 min total job.. regularly tow 14k+ . feel much more comfortable towing now. Ordering for my other trucks soon.
Chris
10/10/2023
Very happy with the hitch. Super easy install. So much better than stock. 2003 f350 Crew Cab Dually v10
Very heavy hitch. Original shipment was missing some hardware, missing hardware was shipped immediately. New hitch did not have a means for mounting the trailer connection plugs. Drilled and tapped holes to mount original bracket.
Great customer service.
Jim
2/1/2023
Hitch has been great, however the typical safety chain hooks will not work on the hitch safety loops. Larger hooks are required.
Robust & well-made. Easy to install
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave R.
6/16/2024
Perfect fit. We have been all across the country and no issues. Excellent product.