bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class V
  4. 2-1/2 Inch Hitch
  5. 20000
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"

Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"

Item # C15809
Our Price: $391.01
You Save: $393.94
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 79 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos


Need help with installation?
Locate installers near me
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Ram 3500's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" part number C15809 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (83)
  • Q & A (0)
  • Photos

2012 Ram 3500 - Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"

  • Class V
  • 2-1/2 Inch Hitch
  • 20000
  • Visible Cross Tube
  • CURT
  • 2700
  • 20000 lbs WD GTW
  • 2700 lbs WD TW
  • Custom Fit Hitch

Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Ram 3500's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


  • Custom fit is designed specifically for your
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


  • Receiver opening: 2-1/2" x 2-1/2"
  • Rating: Class V
    • Maximum gross trailer weight: 20,000 lbs
      • Maximum GTW when used with weight distribution: 20,000 lbs
    • Maximum tongue weight: 2,700 lbs
      • Maximum TW when used with weight distribution: 2,700 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

15809 CURT Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty- 2-1/2"

Installation Details C15809 Installation instructions

Customer Satisfaction Score:

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" - C15809

Average Customer Rating:  4.7 out of 5 stars   (83 Customer Reviews)

Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

2003 Dodge Ram Pickup

Very nice hitch receiver kit for my 2003 Ram 2500 HD. Very well manufactured and complete hardware kit. Took me almost two hours from start to finish by myself. Hardest part is raising the hitch into place by yourself and the bumper bracket welded nuts that interfere with the rear part of the mounting brackets (shown with white arrows). The installation instructions do mention this issue. To solve, I removed the three bolts each per bracket on each side. Raised receiver up at an angle and attached frontmost hardware loosely. Then jacked the receiver up with floor jack until just touching nuts. I then pried prybars between the bumper bracket and receiver mounting flange until the receiver would clear the nuts and jacked up to frame contact. Removed prybars and installed remaining hardware and shims as required. Fishing wires supplied in hardware kit made the install of the four carriage bolts a breeze. Just awaiting my new hitch now!

2011 Ram 3500

BEAST MODE ON! This thing is HUGE! I used to have a receiver integrated into a Ranch Hand bumper but found that massive bumper was only attached via the stock bumper brackets and we almost lost a 11k lbs trailer load recently. We upgraded to this massive CLASS V hitch and we are impressed. Super easy to install with a 2nd person.

My only complaint is it sits a little far back when used in combination with a Ranch Hand bumper such that the hitch was about 4" short of making it to the hole for the pin or for the pintle latch to open. So when you have a plasma cutter you simple just make it fit ;)

Joe O.


Love it. No problems since I installed it and Im a mad man on the road even with a heavy load. I never feel like the receiver is going to fail me. I havent gotten to use the 2.5 pintle hitch function yet but but I have no doubts it will work as advertised.


One of the boxes was busted open and all of the pieces were falling out. Probably need to redo packaging on the torque lift camper tie downs. Very poor packaging

Etrailer Expert

Jenny N.


Oh no! I will have our Customer Service team reach out to you in case anything is missing.


Wow, now this is a heavy duty Hitch Receiver, I was very doubtful that I would be able to install this hitch by myself but with the right equipment on hand, a floor Jack and some large Jack stands I was able to lift it into place, secure all the bolts and tighten everything up. This all took me a little over an hour to complete but I did it. I’ve already hooked my 26’ Cargo Mate 12K GVW trailer to it. One thing I was a bit disappointed with was that the 10” drop I purchased earlier from etrailer is now too low and close to the ground, if I invert it, the ball will be too high. My air bags may give me the necessary clearance from the bottom of the drop to the ground so I may be ok for my 2,200 mile drive south. Great product thus far, additional review post drive. One other item that puzzled me was the 2 extra shims which I had to assume went between the forward receiver and the frame due to the space that was left from a weld point on the frame

Etrailer Expert

Sierra K.


This fits a variety of different Rams so #8 on the diagram in the instructions says to use as needed.

Dodge Ram Pickup

The hitch took a few days to ship once it got to the final shipping location the package was damaged and shipped back to etrailer (ups shipment fault not etrailer) without me ever seeing the box. I called etrailer and they shipped a new one out within minutes. Talk about awesome. It arrived in a few days unharmed. As far as installation on my Dodge Ram 3500 dually, it was pretty straight forward. There was one issue. The most forward bolt had to have a rectangle steel piece, that must be fished through the frame rail. This step was a nightmare and I ruined one of my telescoping magnets. Overall great product, heavy and the finish looks great.


Excellent hitch! I've had a 35' bumper pull camper that weighs nearly 10,000 lbs loaded down and I pulled my brother's 8,000 lb camper with it along with my 4,000 lb SXS and it keeps its shape. As long as you add the right amount of shims and tighten all bolts, you shouldn't have any complaints. I did have to trim my aftermarket bumper in order for me to get a ball on, but the bumper looks better now in my opinion.

2003 Dodge Ram Pickup

Exactly as advertised, easy installation. I purchased this hitch to avoid spending well over a thousand dollars on a torklift system. The torklift system is awesome if your towing a community behind your truck, i am only towing my motorcycle. There doesn't seem to be much in between the extremes for hitches that accommodate hitch extensions. As fore warned by the etrailer staff this hitch did not allow the use of my standard Torklift camper tie-downs. So i had to modify the tie-downs and have some welding done to compensate for the modifications. I am very happy with the installation and believe the hitch and extension will allow me to tow my cycle trailer with zero issues. Thanks etrailer!



Great product. Meets my expectations and needs


Fit great I cut the crossbar off old hitch. I needed the old brackets to mount the bumper back. Lost a bolt trailer sent the whole mounting hardware thanks


The only issue with the receiver hitch is that it dropped approximately 3" lower than the original hitch. Obviously a ground clearance and trailer hitch adjustment situation.


Installation is easily done in 30 minutes in the driveway. Some maneuvering is needed to get the Curt receiver past the factory receiver mounting brackets. There is a clearance issue between the Curt receiver and a factory crossmember on both sides which can be remedied by adding a 3/4" grade 8 washer between the receiver and the frame on each side. It is easiest to torque down the four vertical bolts before installing the two horizontal ones as they interfere with getting a socket on the two rear vertical bolts. Curt did a good job eliminating all failure points (bolts) on the receiver hitch itself and the welds are solid. Overall the Curt receiver is overkill in a good way and it would be hard for even a good fabricator to design one that is stronger. Included are pictures of how it looks on a relatively tall factory height 2009 Dodge 3500 DRW with a 6" Fastway drop and 1220 pounds of tongue weight.


Easy installation. Quality receiver hi tch.


Has held up great. Didn't care for two hitches, removed factory one. I use the Curt for everything.


It’s a great product easy to install and works very well. I would recommend it.

2014 Dodge Ram Pickup

Once again I received the excellent service that I have become accustom to from etrailer!
Thanks everyone!!


Awesome Produt he does what I needed to do and pull my equipment around

2012 Ram 3500

Very strong hitch. Simple, straightforward installation. One person install with ratchet strap and floor jack.


Build quality is good, install was basic. Look is awful, most of these I have installed replace the factory hitch and install tight to the bumper, this one hangs below the factory hitch and looks out of place on the pickup. I considered sending it back but shipping would have been half what I paid for the hitch,



Hitch is working as it should, and I tow heavy daily. Hitch still looks terrible though. I get questions all the time asking whats wrong with it of if its broken. Operates perfect, just doesnt look that good.

Etrailer Expert

Jenny N.


You mentioned that the hitch looks terrible and I wondered if you were referring to how it appears under the factory hitch or if the powder coat has become scratched. For a 2009 Dodge Ram 2500 or 3500 with a factory hitch, there is a Draw Tire hitch part # DT45509 which requires the factory hitch to be removed. There is drilling required to install, does not fit cab and chassis 34 inch frames, only fits models with an 18 inch spare tire or smaller under the vehicle. Bigger tires will not be able to be stored under the truck. If the hitches powder coat is marred as will happen over time, I recommend touching it up with a rust resistant paint like Rustoleum.

2014 Jeep Grand Cherokee

Great hitch, fit right up underneath factory one on my 04 3500 dodge. Little bit hard to get bolts in, recommend having small retractable magnet to help pick them up or retrieve if you drop inside frame.


The quality of the hitch is outstanding. The installation instructions are a little lacking in my opinion. But the hitch is top notch.



I was worried about the ground clearance on my Dodge as I live a considerable distance off pavement. I am surprised that I have been able to pull loads up to 15K and havent bottomed out even going through creeks and washes. I am sure the time will come that I do but it hasnt happened so far. I am pleased with the hitch.


Packing was poor at best. As seen in the attached pictures, no box or padding of any kind, every surface of the new hitch has scratches and dings, making more work for me to protect the surfaces from rust….would have been fine buying a used and abused item. I see the use of fiber tape, I am sure that will take even More work to remove the adhesive. Not a happy camper- have not even removed what is left of the packaging to see more damage. Another review coming for fit, installation and finish! Can’t wait for another disappointment!

Etrailer Expert

Sierra K.


I apologize for the state your hitch arrived in. I will be sending this to customer service. To prevent premature rust, I would cover the hitch in anti-corrosive paint.


Product appears to be what I need… The way it way shipped … that’s a whole different ball game . It showed up wrapped in clear plastic so pretty much everywhere will need smoothed out and painted so it doesn’t rust immoderately

2012 Ram 3500

Five star for price and shipping. Three star to curt. The hitch is square with the truck. Where the ball hitch slides in is not square with the rest of the hitch. The ball hitch sits at a 6:30 position. Works fine, looks bad.

Todd M.


Tough hitch, I wish the receiver part was 1/2 longer so I could use weight safe hitch in up position. It does not stick out as far as stock so it hits bumper in up position.

2004 Dodge Ram Pickup

Nice unit, easy install. Have yet to tow with it, but it looks superior to the factory tow setup.

Ford Ranger

Install was smooth and easy. Definitely a 2 person job with getting the hitch into place. Will be towing my small Ford Ranger from Louisiana to Oklahoma in a few weeks so will report back how well things go. So far couldn’t be more satisfied.

Joseph D.


Hitch has performed flawlessly with zero issues. I use it to tow my boat twice a month and have also used it to tow a few vehicles on a flat bed trailer. Bolts have never come lose and I love knowing the system is rated for way more than what I am towing.

2003 Dodge Ram Pickup

No issues with the hitch itself at all, its a nice sturdy assembly. I would recommend having two strong people for an easy install. I did it by myself with a floor jack, but another set of strong hands would have been much better. The etrailer install video does a good job of showing how to use the fish wire for the bolts. But, on my 2003 Ram 3500 long bed the bumper bracket bolts keep you from lifting the hitch vertically. I had to slide it in from the rear to clear the welded on nuts, so you don't want the bolts in place till the hitch is up there at least on my long bed 3500. I held the hitch in place with a floor jack while I fished in the plates and bolts. This is a great option if you don't want to lift the bed to remove a factory hitch. Having the two stacked receivers is a first for me, but I didn't want to remove the OEM set up with all my heavy tool boxes in the bed.

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • 2-1/2 inch Trailer Hitch Recommendation for 2008 Dodge Ram 3500 for Use with Hitch Extender
    You are going to need to replace your 2 inch trailer hitch on your 2008 Dodge Ram 3500 with one with a 2-1/2 inch opening so that you can use your 40 inch hitch extender. For that you would want the Curt hitch part # C15809 which is a confirmed fit and would work well. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Class V Trailer Hitch Receiver Capable of Towing 20,000LBS For a 2003 Dodge Ram 3500
    Yes, the Curt Trailer Hitch Receiver # C15809 will fit your 2003 Dodge Ram 3500. This receiver is capable of fitting with the factory receiver still installed or no factory receiver present, That is why it looks different from your factory receiver in the image. You must have the factory bumper for the receiver to install properly. This receiver will support the towing capacity of 20,000lbs you need.
    view full answer...
    Image 1 for
  • Spring Mount Interfering with Fit of Curt Class V Trailer Hitch C15809 on 2006 Dodge Ram
    I spoke with my contact at Curt, who tells me that some Ram trucks, even though they were manufactured as pickup trucks were assembled using the spring mounts from the cab and chassis trucks. The Cab and Chassis truck spring mount would extend below the bottom of the frame. Please take a look at the diagram I've provided showing what the spring mount SHOULD look like. If your spring mount extends below the frame, please let me know.
    view full answer...
    Image 1 for
  • Towing Capacity of Curt Trailer Hitch Receiver C15809 Without a Weight Distribution System
    The gross towing weight rating for the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" part # C15809 is 20,000 lbs with or without the use of weight distribution. The tongue weight rating is also 2,700 lbs with or without the use of weight distribution according to Curt. You do want to make sure you are not exceeding the tow weight rating for your vehicle that can be found in the owners manual.
    view full answer...
  • Curt Trailer Hitch Fit on 2008 Dodge Ram 3500 With Factory Hitch
    The Curt Hitch # C15809 that fits on your 2008 Dodge Ram 3500 sits directly below the factory hitch, as you can see in this photo a customer provided of his hitch installed on a 3500. Though we have not test fit this hitch on an '08 Ram 3500, we have fit them on similar model years and found there is - approximately - less than 18 inches from the ground to the bottom of the hitch. I would not be able to confirm that exact distance on your truck but that should give you a general idea...
    view full answer...
    Image 1 for
  • Curt Class V Trailer Hitch Compatiblity with 2015 Ram 2500 with 5 Inch Exhaust
    You won't have any fitment issues with the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15809. I've attached a photo of this installed so you can see the exhaust fit with this hitch will allow plenty of room. I've attached a video of the installation on a 2014 model to assist. The TorkLift hitch has already been discontinued so it is no longer in our fit guide. I do not know the reason why it was discontinued as that wasn't disclosed to us. If it were...
    view full answer...
    Image 1 for
  • How to Figure the Towing Weight Capacity of a 2004 Dodge Ram 1500
    If you look on page 275 of your owner's manual it gives a list of trailer towing weights based upon the Class of the hitch that is installed on your 2004 Dodge Ram 1500. Class I - 2,000 lbs Class II - 3,500 lbs Class III - 5,000 lbs Class IV - 12,000 lbs It then specifies that the Gross Combination Weight Rating (GCWR) cannot be exceeded. You will be able to find this rating on your vehicle on the inside of the driver side door frame. This is the total permissible weight of your vehicle...
    view full answer...
  • Recommendation for Installing a Hitch on a 1995 Ford F700 Dump Truck
    Since we do not have any confirmed hitch fits for your 1995 Ford F700 your best option would be to find a very qualified fabricator in your area, explain to him what you are trying to do and then let him make you something that will work. We have some universal fit hitches, but none of them have the capacity (or even close) to what you would need so I would not recommend them.
    view full answer...
  • Best Trailer Hitch for a 2006 Dodge Ram 3500 with the 2" OEM Trailer Hitch
    I recommend using the Curt Trailer Hitch Receiver # C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs. Keep in mind that your Ram 3500 needs to be rated for those weights to tow at the full capacity of the trailer hitch. This trailer hitch requires that the factory bumper still be installed, but it can actually fit under your OEM 2" trailer hitch....
    view full answer...
  • Will a Curt Trailer Hitch # C15809 fit a 2012 Dodge Ram 2500 Mega Cab
    The Curt Trailer Hitch Receiver # C15809 that you referenced will work on your 2012 Dodge Ram 2500 Mega Cab. Cab and chassis model trucks come from the factory without truck beds on them at all. Typically trucks are bought like this so a flat-bed or service body can be installed. Check out the picture I attached that shows a cab and chassis truck.
    view full answer...
    Image 1 for Image 2 for
  • Are Hitches Compatible Between 2003 Dodge Van and Dodge Ram 1500?
    Trailer hitches are custom fit for specific vehicle years, makes and models, and there are no hitches that are going to be compatible between a 2003 Dodge van and 2006 Dodge Ram 1500. The hitch that you referenced, Curt # C15809, is a fit for a 2006 Dodge Ram 1500 with or without a factory hitch, but will not work with any Dodge van. I have added a link to an install video of this hitch on a 2004 Ram for you to take a look at.
    view full answer...
  • Trailer Hitch Recommendation for 2009 Dodge Ram 2500
    Hey Dolores, for your 2009 Dodge Ram 2500 we have the Curt hitch part # C15809 that fits and would work really well. It has great towing capacities and fits if the truck had the factory hitch or didn't have it.
    view full answer...
  • Does the Factory Trailer Hitch of a 2006 Dodge Ram 1500 Stay On to Install Aftermarket Hitch
    The factory hitch of your 2006 Dodge Ram 1500 has to stay on to install and use the Curt hitch part # C15809 that you referenced. You will need to install the bolts back through the hitch so that you can install the Curt hitch. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch...
    view full answer...
  • Class V, 2-1/2 Inch Trailer Hitch and Long Extension to Clear In-Bed Camper in a 2006 Dodge Ram 2500
    If you were to use an extension such as # C45048 with Curt trailer hitch # C15809 on your 2006 Dodge Ram 2500 then it would be limited to 4,500 pounds at the 34 inch length. But at the 24 inch length it is rated for 6,000 pounds and a standard length ball mount would provide additional extension to clear the in-bed camper.
    view full answer...
  • Towing and Payload Capacity of 2015 Ram 2500
    I looked up your 2015 Ram 2500 Tradesman and it looks like it has a towing capacity of 11,020 to 11,870 lbs depending on how it is equipped. The payload is then between 2,187 and 3,043 lbs. For a Class V hitch from Curt that does fit your 2015 Ram 2500 the Curt # C15809 would be a great option confirmed as a fit. The hitch you referenced does not fit your truck. This hitch has actually more towing capacity than your truck so you'd get to take full advantage of your truck's towing capacities.
    view full answer...
  • What Is The Heaviest Duty Trailer Hitch Receiver For A 2003 Dodge Ram 2500?
    The highest rated trailer hitch receiver that is tight to the rear bumper of your 2003 Dodge Ram 2500 is going to be the Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # C15704 which is rated for for 2700lbs tongue weight and 18000lbs trailer weight. Its going to come down to being ok with a hitch that sticks down a bit lower like the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15809 so you can get the 20000lb trailer weight rating, or if...
    view full answer...
  • Comparing Curt Class V Trailer Hitch Receivers for a 2005 Dodge Ram Pickup 2500
    The main differences between the Curt Trailer Hitch Receiver part # C15704 (Standard) and the Curt Trailer Hitch Receiver part # C15809 (Commercial) is that the commercial version hangs down lower which is by design to allow for better clearance on models with service bodies. It's almost a 3" difference in drop.
    view full answer...
  • High Capacity Hitch and Extension Recommendation for 2005 Dodge Ram
    The Curt hitch part # C15809 is a heavy duty hitch confirmed as a fit for your 2005 Dodge Ram 2500. It has incredibly high towing capacities at 2,700 lb tongue weight and 20,000 lbs total trailer weight. For a longer hitch extension that would fit the hitch and give you the length you need we have the Curt extension part # C45048. Here are the capacities of the extension when used at the longer 34 inch length. Maximum gross trailer weight: 4,500 lbs Maximum GTW when used with weight...
    view full answer...
  • 2-1/2 Inch Trailer Hitch For 2007 Dodge Ram 3500 With Factory 2 Inch Hitch
    We have a 2-1/2" hitch receiver that fits your 2007 Dodge Ram 3500 with a factory 2" hitch, but the # C15704 you mentioned is not a fit. So don't cut the 2" receiver off, you'll need a different one that fits right under the OEM hitch: - Curt Trailer Hitch Receiver # C15809 The # C15809 is very similar to the other Curt hitch, but the brackets are longer allowing it to fit under your OEM hitch. It is a Class V and has a 2-1/2" receiver with a 20,000 lb towing and 2,700 lb tongue weight...
    view full answer...
  • Trailer Hitch with High Capacity Recommendation for 2011 Ram 2500 with Factory Hitch
    You'd have to check the factory hitch of your 2011 Ram 2500 for a capacity listed on it as it will be stated on it typically on a sticker. We have the Curt hitch part # C15809 which is a confirmed fit for your truck and has a capacity of 20,000 lb trailer towing and 2,700 lb tongue weight. You'd also want to check the towing capacity of your truck that's stated in the owners manual and be sure not to exceed this figure too.
    view full answer...
  • Do I Need to Remove the Factory Hitch on My 2004 Dodge Ram 2500 to Install an After Market Hitch?
    I would be happy to help you. Removing the factory hitch is not necessary and will be difficult to remove based on how it was attached to your Ram 2500's bumper. Ultimately, it'll be up to you but it being on there will have zero effect on the Curt Trailer Hitch item # C15409 you were looking at. The Curt is going to be the best option for adding a hitch. This is a Class V hitch with a 2" receiver that is custom fit and bolts to your Ram's frame with included hardware. It does require the...
    view full answer...
  • Should Factory Trailer Hitch Be Removed From 2008 Dodge Ram 2500 to Install Curt Trailer Hitch
    You probably can't remove the factory hitch on your 2008 Dodge Ram 2500. They are usually welded on as part of the bumper structure. It would not be in the way since the Curt hitch # C15409 attaches to the frame around the factory hitch and the new hitch will be below the OEM hitch so it would not make it any easier to install the Curt hitch.
    view full answer...
  • Which Class V Hitch for 2004 Dodge Ram 2500 has the Best Ground Clearance
    The Class V hitch we have for your 2004 Dodge Ram 2500 with the best ground clearance is the Curt hitch part # C15809. It doesn't tuck right under the rear bumper like what you can see in the attached picture but it does sit the highest.
    view full answer...
    Image 1 for
  • Curt Trailer Hitch Fit for 2006 Dodge Ram 2500 Mega-Cab 4x4 Short Bed Pickup
    Curt's 2-inch Class V hitch # C15409 is a confirmed fit on your 2006 Dodge Ram 2500 with factory hitch and factory bumper. The 2-1/2-inch hitch part # C15809 is also confirmed to fit. Both are designed to work with the stock spare tire but they have not been tested with the wider 285mm tire. The spare may fit, maybe with a bit of maneuvering, but we cannot say for sure. Your truck's towing capacity will remain as stated in the manual. Even if you install air bags and tires rated for more...
    view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Jared G
Test Fit:
Jared G
Employee Chris R
Video by:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924