Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Ask the Experts about this CURT Trailer Hitch

Replacing Factory Hi...

Will the Curt Class ...

Will the Curt Class ...

Recommended Trailer ...

Curt High Capacity H...

• Will Curt Class III Trailer Hitch C14361 Fit Quad Cab 2004 Dodge Ram
  Yes, the Curt Class III Trailer Hitch # 14361 that you referenced will fit a 2004 Dodge Ram ST or SLT Quad Cab 1500//2500/3500 with the HEMI engine as long as it isn't equipped with the factory hitch. The HEMI Sport is an add-on factory package that features, among other things, different trim at the rear that prevents fitment with this hitch. As long as you don't have this particular package the hitch will work great. The Class III hitch features a 10,000 pound towing weight capacity...
  view full answer...
• Replacing Factory Hitch on a 2006 Dodge Ram 2500 Long Bed with a New Trailer Hitch
  All of our trailer hitches that fit your 2006 Dodge Ram 2500 with a factory hitch, will sit below the factory hitch. Since you are removing your factory hitch, the Curt hitch I recommend is # 14361 as it's 6-1/2 inches from the top of the receiver tube to the bottom of your truck's frame. It's a Class-IV hitch and has a gross trailer weight of 10,000 pounds. See the diagram I created for you. You will want to use that dimension and compare it to where your current hitch sits. I included...
  view full answer...
  
• Hitch Recommendation for a 2012 Dodge Ram 1500 without Factory Hitch
  For your 2012 Ram 1500 without a factory hitch the correct part number for a Curt Class IV hitch would be the # 14374. The # 14361 is designed to fit older 1500 models so it would not work for you. I attached an install video for you to check out as well.
  view full answer...
• Hitch Recommendation for a 2005 Dodge Ram 1500 Towing a 7800 lb Trailer
  The Curt Hitch part # 14361 that you referenced would be a great hitch for your 2005 Dodge Ram 1500. I checked with Curt and this hitch will fit your truck as long as it is not a 6 foot bed. If you do have a 6 foot bed you could get the Draw Tite Hitch part # 75420 as this is a similar hitch that would work with a 6 foot bed. Both hitches have enough capacity for your trailer.
  view full answer...
• Hitch Applications for a 2003 Dodge Truck
  I would recommend the Curt Class IV Trailer Hitch, item # 14361, for your 2003 Dodge truck. This is a frame mount hitch which will not require you to remove the knockouts in the factory bumper cover and it has a higher towing capacity which will allow for more towing options and greater safety when towing. There are no pitfalls to this hitch that I know of. The Curt Class III Trailer Hitch, item # 13326, is also a good hitch the only downfall is that if the tongue is overloaded the bumper...
  view full answer...
• Curt Trailer Hitch for a 2007 Dodge Ram Pickup
  The Curt Class IV Hitch, part # 14361 is a fit for your 2007 Dodge Ram Pickup 1500 Long Bed provided you don't have the factory installed tow package on the vehicle. If you do, you'll instead want the Draw-Tite Class IV & V Ultra Frame, part # 41929.
  view full answer...
• Will the Curt Class III Receiver Hitch Fit a 2002 Dodge Ram Pickup with 10-01 Build Date
  The Curt Trailer Hitch for the 2002 Ram, item # 13326, is designed to fit all Dodge Ram 1500 pickups with a build date before 11/02. If the beam on the hitch has mounting holes that are 12-1/2 inches apart you should be able to mount the hitch on your vehicle with no problems. If your Ram is a 2001 or a 2002 with build date after 11/01 you will need a cross frame style hitch like the Curt Class IV Hitch, item # 14361. I have included instructions for each of these hitches for you to...
  view full answer...
  
• Class IV 2014 Ram 2500 Quad Cab with Factory Hitch Recommendation
  The Curt Hitch part # 14361 is designed to fit trucks without the factory hitch. I cannot recommend it for you since your factory hitch is built into the bumper beam which is built differently on the trucks with or without the factory hitch. It hangs lower and more to the rear of the vehicle for trucks with the factory hitch, and the opposite on vehicles without it. Since I cannot recommend you remove the bumper beam the best option is to go with a hitch like the part # 41929 which will...
  view full answer...
• Recommended Trailer Hitch Receiver For 2010 Ram 3500 With Ranch Hand Legend Bumper
  The Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41929 will sit 9 inches from the bottom of the vehicle frame rails to the top of the receiver tube. This will work well with the ranch hand bumper you have and won't make the drop seem so drastic. If you go with a hitch that is not for the OEM hitch receiver installed, you can use the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14361 which measures 6-1/2 inches from the frame to the top of the...
  view full answer...
  
• Curt High Capacity Hitch for 2003 Ram 3500 with OEM Hitch
  For a high-capacity hitch that fits under the OEM hitch, you would use the Curt Class V, part # C15409, which is the only hitch Curt offers that is compatible with the OEM hitch. In order to install this hitch, your truck must have the factory bumper. As you can see in the install instructions, no part of the OEM hitch would to be removed. I have captured a diagram from the instructions that shows how the Curt Hitch would sit in relation to the OEM hitch.
  view full answer...
  
• Correct Trailer Hitch Receiver for a 2003 Dodge Ram 1500 Made After and Before Nov. 2002
  If the white sticker inside the driver door jamb on your 2003 Dodge Ram 1500 reads 07/2002 as the date of manufacture, the correct Curt Trailer Hitch Receiver for you will be part # C14020, not part # 14361 which is for trucks made after 11/2002. This trailer hitch has the same class IV rating, 2" receiver tube opening, and plenty of capacity for your 6,500 lb camper just like the one you were looking at. It also offers a completely drill free installation and is made right here in the USA.
  view full answer...
• 2 Inch Trailer Hitch Receiver for 2015 Ram 2500 With Factory Trailer Hitch
  I can definitely understand not wanting the look of two hitch receiver openings on your 2015 Ram 2500. The issue is that some hitch receivers are fully or even partially welded on, so there is no guarantee that one can be removed. So because of that I recommend a hitch that is designed to fit under your factory hitch, the Curt Trailer Hitch Receiver # C15409. This is a 2" hitch receiver that sits below your Ram's factory receiver, which is going to make it a bit easier to get your heavy...
  view full answer...
• Class IV Hitch Recommendation for 2008 Dodge Ram 1500 to Replace Class III Curt Hitch
  Sounds like you have the Curt Class III hitch part # 13333 installed on your 2008 Dodge Ram 1500 based on what you described and the fact Curt did not make the OEM hitches for your truck. So for a higher rated hitch that fits your truck we have the Curt Class IV hitch part # 14361 which is a fit and has a much higher towing capacity at 10,000 lbs trailer weight.
  view full answer...
• Will Draw-Tite Class III Bumper Hitch part 75135 Fit my 2002 Dodge Ram Pickup With Roll Pan Bumper
  This hitch will only fit the bumper that originally came with the truck. You would need to use a frame mounted hitch like Draw-Tite part # 41504 or Curt part # 14361 since you have a roll pan.
  view full answer...
• Fit of Curt Class IV Hitch 14361 on 2007 Dodge Ram 1500 Regular Cab Shortbed Pickup
  Yes, the 2-inch Class IV Curt hitch # 14361 is a confirmed fit on your 2007 Dodge Ram 1500 regular cab/shortbed pickup. This hitch installs without drilling and all required mounting hardware is included. The instructions and a helpful article are linked to aid your install. If you also need a 4-pole wiring harness you can use kit # C56175 which includes the quick-splice connectors you'll need to splice the harness into your truck's taillight wiring. I linked our main page for 2-inch...
  view full answer...
• Trailer Hitch for a 2004 Dodge Ram 3500 Diesel Dually
  Yes, the Curt trailer hitch # 14361 is listed as a fit for all 2004 Dodge Ram 3500 series trucks. But it does not fit HemiSport Quad Cab, Ram Rumble Bee or SRT-10 models. I have included a link to the installation instructions for you. I also recommend etrailer ball mount # EBMK2416. It comes with a ball mount, 2 hitch balls, a hitch pin with clip, and a storage bag. If you need to add trailer wiring use # C55504.
  view full answer...
• Recommended Trailer Hitch For 2008 Dodge Ram 1500 Quad Cab
  There are a few options for trailer hitches for your 2008 Ram 1500. I recommend the Curt Trailer Hitch, part # 14361. This is a Class lV trailer hitch and it has a 2 inch receiver opening. This hitch is a heavy duty hitch and requires no drilling for installation. For a Class lll hitch I recommend Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75420. This has a 2 inch receiver opening and also requires no drilling for installation. Both of these hitches do have a higher towing...
  view full answer...
• Recommended Trailer Hitch for a 2003 Dodge Ram 1500
  For your 2003 Dodge Ram 1500, I recommend the Curt Class IV Receiver Hitch part # C14020 if your truck was built before 11/1/02 or part # 14361 if your truck was built after 11/1/02. The white tag on the driver door jamb will tell you the date the truck was manufactured. Neither of the above hitches will require any drilling for installation as they install using pre drilled holes in the frame rail. The spare tire will also remain in place and unaffected by either trailer hitch.
  view full answer...
• Best Trailer Hitch for a 2008 Dodge Ram 1500 SLT 4x4 to Tow a 4,500 Pound Trailer
  Curt trailer hitch # 14361 would certainly do the trick and it does fit your 2008 Dodge Ram 1500 SLT 4x4. But this hitch might be a bit of an overkill since its capacity is 10,000 pound gross trailer weight. It is a great option if you will be towing a heavier trailer in the future. But if you do not anticipate towing any more than the 4,500 pound trailer then I recommend hitch # 13333 which is rated for 6,000 pound gross trailer weight and 600 pounds tongue weight. When used with weight...
  view full answer...
• Recommended Class IV Hitch for Towing 7500 lb Camper Trailer with 2004 Ram 1500
  The Curt Class IV Hitch you referenced, part # 14361 would be the correct hitch for the 2004 Ram 1500 unless it already has the factory hitch, or it is a Hemi Sport Quad Cab, a Rumble Bee or an SRT-10 model. If your truck already has the factory hitch, you will need to go with the Draw-Tite Class IV, part # 41929. This hitch is designed to install so that the receiver sits below the factory receiver. Like the Curt model you referenced, it will not fit the Hemi Sport Quad Cab, the Rumble...
  view full answer...
• Front, Second Row Bench, and Behind Second Row to Rear Floor Mats for 2015 Ford Expedition Non-EL
  Starting with the front seats for your 2015 Ford Expedition, non-EL, with second row bench seat you can use # HL18371 for the front mats. For the second row I found that # HL14361 fits all models of the 2015 Expedition. For a cargo mat that fits from behind the second row, over the folded down third row, all the way to the back of the cargo area you would need to use WeatherTech mat # WT40222 since Husky does not have one that will fit.
  view full answer...
• Trailer Hitch to Tow a 4,000 Pound Trailer with a 2016 Ram 1500
  Curt trailer hitch # 13333 for the 2016 Ram 1500 is rated for 600 pounds tongue weight and 6,000 pounds gross trailer weight so it is rated for more than enough for the 4,000 pound trailer. I have included a link to a video showing and example installation of this hitch for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If...
  view full answer...
• Recommendation for a Trailer Hitch to Fit a 2007 Dodge Ram 1500 Truck
  For your 2007 Dodge Ram 1500, we carry a couple different trailer hitches. The Curt Class III Hitch, # 13333, is a custom-fit hitch that uses a bolt-on mount to connect to your Ram truck. The hitch has a gross towing capacity of 6,000 lbs and a tongue weight rating of 600 lbs. This hitch has a 2 x 2 inch receiver opening. Curt also has a Class IV hitch, # 14361, that has a gross towing weight of 10,000 lbs and a tongue weight of 1,000 lbs. This hitch might be the best option for your...
  view full answer...
• Class 3 or Class 4 Trailer Hitch Receiver for 2007 Dodge Ram 1500 Without Factory Hitch
  Putting a Class III or Class IV trailer hitch on your 2007 Dodge Ram 1500 really depends on how you are going to use it. The Class III etrailer Trailer Hitch Receiver # e98852 or Curt Trailer Hitch Receiver # 13333 is the best option for light towing. They are very simple to put on with zero drilling required and have a 6,000 lb towing and 600 lb tongue weight capacity, which is more than enough for most Ram 1500 models (please refer to your owner's manual for your specific capacity as...
  view full answer...

Do you have a question about this Trailer Hitch?