bing tracking image
  1. Trailer Hitch
  2. Dodge
  3. Ram Pickup
  4. 2013
  5. Draw-Tite
FITS 2013 Dodge Ram Pickup
Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

Item # 41948
lowest price pledge
Our Price: $220.74
You Save: $196.64
Trailer Hitch
Confirmed to Fit
2013 Dodge Ram Pickup

1500 - without factory hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 55 lbs
In Stock
41948 - 12000 lbs GTW Draw-Tite Trailer Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos


Need help with installation?
Locate installers near me
Draw-Tite trailer hitch for your 2013 Dodge Ram Pickup are available from Installation instructions and reviews for your Dodge trailer hitch. Expert service, and cheapest trailer hitch price guarantee. carries a complete line of Draw-Tite products. Order your Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" part number 41948 online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (230)
  • Q & A (0)
  • Photos
  • Why etrailer?

2013 Dodge Ram Pickup - Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

  • Class V
  • 2 Inch Hitch
  • 12000
  • Visible Cross Tube
  • Draw-Tite
  • 1500
  • 15000 lbs WD GTW
  • Custom Fit Hitch
  • 1500 lbs WD TW

Ideal for heavy-duty towing, this Dodge Ram Pickup trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Fully welded steel construction with computer-aided design ensures strength and durability
    • Heavy-duty side brackets and wiring connector mounting bracket are also welded on
  • Reinforced, cast center section ensures the highest tongue weight capacity possible
  • Oversize safety-chain loops are easy to access
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 12,000 lbs
      • Maximum GTW when used with weight distribution: 15,000 lbs
    • Maximum tongue weight: 1,500 lbs
      • Maximum TW when used with weight distribution: 1,500 lbs
  • Limited lifetime warranty

Ultra Frame Design with Cast Center Section

Specifically designed for a serious towing machine, this rugged trailer hitch receiver features the strong, durable construction that your heavy-duty applications require. The secure side-bracket design and all-frame attachment system ensure maximum stability. The cast center section lets you pile on the tongue weight without any worries. And the reinforced pin hole and large safety-chain loops better accommodate your heavy-duty towing needs.

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real-life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

41948 Draw-Tite UltraFrame Class 5 Trailer Hitch Receiver with Cast Center

Installation Details 41948 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
12,000 lbs.

Tongue Weight (TW):
1,500 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
15,000 lbs.

Tongue Weight (TW):
1,500 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation

California residents: click here

Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" - 41948

Average Customer Rating:  4.5 out of 5 stars   (230 Customer Reviews)

Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.

2020 Ram 1500 Classic

Garbage! This thing was a nightmare to install. It took 2 floor jacks and a dead blow hammer to get it in place, only to find that It was tweeked horribly. If your on a budget, get it. Just know you will need to grind all the holes bigger to make it fit. They will say it’s from metal movement, but that’s BS. It’s poorly packaged. There is no foam to protect the hitch at all. It’s only the cheapest cardboard China has to offer. Upon receiving the hitch the box looked like it had been attacked by a T-Rex. If I hadn’t needed the hitch when it was delivered, I would of sent it back. I gave it 2 stars only because it was cheap.(you get what you pay for…..)

I will have our Customer Service team reach out to you. It sounds like that the side brackets were knocked out of alignment which can happen while in transit to our facility or to you. We do have a FAQ that can assist with moving the side brackets of the hitch back into alignment to allow for installation. I also recommend touching up the hitch with a rust resistant paint which you will have on hand for regular hitch maintenance.
-- Etrailer Expert Jenny N - 03/04/2022

2022 Ram 1500 Classic

The hitch receiver is very nice but the installation was not so nice. Two of the holes would not line up and we had to drill. It was a very difficult install. Hitch was nice but the install was very difficult. If it states no drill direct mount it should be just that.

Thank you for the review! One thing that happens sometimes is the hitch becomes flexed in the shipping process. We actually have a help article that shows some ways to straighten out a hitch since this is not an uncommon occurrence due to the bulkiness of the hitch.
-- Etrailer Expert Brooke M - 05/02/2022


Good product heavy hitch. Box was damaged but seemed ok. difficult to install alone two people install for sure. Fits very tight needed a big hammer to help into place maybe a little damaged during shipping who knows.

It may have been a bit flexed which is a common occurrence in hitch receivers. I am glad that you got it installed.
-- Etrailer Expert Sierra K - 11/01/2021


I ordered this hitch, not exactly knowing what I was getting. Turns out I got more than I bargained for. It is one of the heaviest built hitches I have ever seen or owned. Install was easy if you have tools and some mechanical knowledge. My only concern with it, is that the slots where you hook your chains, are a little tight. Takes a little jockey'n around to get them to clip. And that's because the metal that the hitch is made of, is SOOO thick. So It's a tradeoff. Highly recommend!!

A year later, I still love this hitch. I added sone chain link connectors for my safety chains and it alleviated my previous problem.
Daniel H - 02/02/2022


Trailer hitch bolts don’t line up and now have a cross threaded bolt in my uniframe

Sometimes weldnuts need to be cleaned, it can be splatter from when the frame was welded together or it could be paint or corrosion. To clean the threads out well, you can use a wire brush and some brake cleaner. Make sure you start the bolts so they are not cross threading the nuts. It also sounds like your hitch may be flexed which is why the hitch wont line up. I have attached a helpful article.
-- Etrailer Expert Heather A - 03/25/2022


I gave this hitch a 5 star rating, this is for the hitch itself.
The install was greatly added by the use of the fish wires for the bolts.
It took about 3 hours to install this hitch, the fit was extremely tight,
with a floor jack under the hitch and almost picking the truck off the floor
it still took a 4# hammer and a block of wood to persuade the hitch into the frame
after loosening the upper bumper crossmember bolts, the rearmost factory bolts then took two pry bars and four hands to get the last bolt started. Once finally started the bolts pulled the hitch up into position and swaged the hitch into the bumper braces.
The hitch seems to be well built and heavy duty the only problem is the alignment of the two rearmost holes and the extremely snug fit.
The hitch also looks good after the installation was complete, I didn't get a picture of the installed hitch, this was on my son inlaws pickup.


Solid hitch and well thought out. The problem is with fitment. The passenger side mounting bracket need to be move towards the outer part of the truck (to the right side-looking at it from behind) about 1/8-1/4” at least. I had to apply constant pressure along with hitting it with a hammer to get it up. Then had to use hydraulic tools in order to pinch the mounting bracket to the existing bumper bracket in order to get the bolts to line up with the threaded hole.

Thank you for your review, it does sound like your hitch was flexed in shipping. I have attached a helpful article that explains how to flex it back into place.
-- Etrailer Expert Heather A - 10/12/2021


Required a substantial amount of drilling as 4 of the 6 pre-drilled holes were an inch off. Fitment was off slightly and the cross member and bumper had to be taken off the vehicle to be installed. Both arms of the product were sticking through the box upon delivery.

I will have our customer service team reach out to you. It sounds like that the side brackets were knocked out of alignment which can happen while in transit to our facility or to you. We do have a FAQ that can assist with moving the side brackets of the hitch back into alignment to allow for installation.
-- Etrailer Expert Jenny N - 02/19/2022

2017 DodgeRam Pickup

Easy install thanks etrailer! Simple, extremely quick shipping and follow up. That's great customer service. Few simple tools 19&21mm sockets ratchet and torque wrench and about 1.5 hrs I had hitch and brake controller installed in my 2017 ram. I used a little anti seize on all bolts.

2017 Ram 1500

This hitch was terrible to install. Trying to install the hitch over the support none of hole lined up perfectly. We had to long ate the holes on the new hitch to bolt it on. A one hour job took 3-1/2.

by: was very helpful with the specifications for trailer hitches, and sent their recommended hitch to us very quickly.
*** Installation was a nightmare. ***
When we first tried to install it from underneath, none of the holes could be aligned. We removed the bumper, and the rear cross-member (that the bumper was bolted to), so that we could assemble it on the ground before putting it in, and it still needed modification. Putting the bolts though with a string as instructed was not a simple task, but it was the easiest part of this installation. The instructions are vague. Once the assembly was put back into the truck, 4 of the remaining holes needed to be modified (the furthest forward in the truck and the middle holes).
It hard to understand how Draw-Tite got the holes to be mis-aligned this much.
It took a day of grinding and some pry bars to get it in.
If I didn't need it soon, I would have sent it back.
The hitch does look and feel strong now.

2017 DodgeRam Pickup

I have a 2017 Dodge Ram 1500. This is the hitch that I’ve been looking for to tow my toy hauler Instructions was easy to read I put the hitch on all by myself it’s a perfect fit can’t wait to try it out. I would recommend this hitch to anybody that’s looking to buy a hitch it is definitely what the picture shows it’s totally heavy duty

2019 Ram 1500 Classic

Hitch went on great after some slight persuasion with a pry bar to line up the factory holes. I thankfully had an impact wrench on hand which made installtion that much better. All in all it took me about hour that from the time i started dropping the spare tire to securing the spare tire. Feels very strong fit nice and snug. The fish wire for the bolts was really handy!

2019 Ram 1500 Classic

Purchased for my 2019 Ram 1500 Classic. Took me about 4 hours to install, had to remove all the rear bolts on the vehicle to loosen the bumper enough to get the hitch receiver up (it is very tight, which is a good thing). Also be sure to remove the spare tire before trying to install (not on the instructions). Once I got it up in place, and got the 2 front bolts in, there are 6 bolts in the top (3 on each side). Of those 6, only 5 aligned enough to get bolts into them and there is 1 bolt hole that I can't get a bolt in. I'll have to drill it out in order to get it to fit. Contacted customer support, they provided me 1 video on install and also linked me to some methods to bend the hitch if it wasn't square. Disappointing quality for $[XXX] to now have it up and misaligned. Not sure if this is a quality issue based on the manufacture in Mexico or what, but I was disappointed in the product and lack of support. Great looking hitch though, hopefully it doesn't fall off my truck when I'm towing because I'm missing a bolt (until I can find a bit to try to drill through the bottom of it).

2014 Ram 1500

Shipping was a little sketchy, as you can tell from the photo. Not etrailer’s fault...looks like the shipping company didn’t even slow down when they delivered it. Either way, all the parts/hardware were present. Pretty easy install and it seems solid. Haven’t hauled anything yet but I don’t think it is going to be an issue with this thing. Took a little longer than expected, mostly bc I did it alone. Watch the [online] install video. Helped a good bit.


Hi I haven’t installed the product yet so I don’t want to give a rating but I had a big problem with how my item was shipped. Every piece of my order was just put into a big cardboard box so during shipping the loose items kept fumbling around and by the time I got it the receiver was poking out of the box and everytime I picked up the box it shifted around in the box. I’m not sure why bubble wrap or some sort of packing was not used to secure the items in the box. Very disappointed with that becuase this Was a Christmas gift for someone and the box was completely destroyed by the time I got the product. I’m hoping it wasn’t damaged in the shipping process because it Was free to bounce around in the box

2016 Ram 1500

Love this draw tight !!!
Very easy
to install , only took me about 30 minutes and that was because I had to locate my tools that someone had barrowed without my knowledge lol..
This will help save my bumper and tag from being damaged from my trailer tong also ..


Product arrived on time and was easy to install has been a great addition to my truck


Works great. Took 15 minutes to install. Use for pulling trailers.


Drawtite has a great reputation for quality. Delivery was pretty darn quick. Have not installed yet but soon. Thanks!


Used it one time in October of 2020. Worked great. Took a small amount of finesse to get the bolts in/lined up correctly. Not sure if the hitch was slightly tweaked or my truck, but worked as it should. Would recommend this to a friend, same with website. Shipping was quick and easy! Thanks again!


The fitment was tight and snug, the use of a rubber mallet and a second set of hands is necessary. Construction is very stout and well built. My hitch arrived with some scratches to bare metal in the paint finish, kind of unfortunate since they were on the outside where they'll probably show rust soon. The two middle holes mounting to the framerails did not line up, I had to use a carbide grinding bit to widen the holes in order for the bolts to line up and thread in. With that added time, It took about 45min to complete. Fishing the carriage bolts through the frame was not hard at all. This overall fit well and will allow me to pull a trailer with my '12 Ram 1500 ST.

2011 Ram 1500

Heavy duty hitch with plenty of attachment points. It is definitely a tight fit and you may need to be creative when getting it in and lined up. I had an issue with the frame bolt holes on the passenger side not lining up at all but it was likely due to a previous fender bender that didn't get straightened out all the way. Again, same as the last hitch I ordered, the box was damaged from the hitch. UPS guy and I agreed that perhaps some padding on the pointy bits of the hitch that may poke through the box would be great. Otherwise it got here quick and is way beefier than I feel I need.

2019 Ram 1500 Classic

It's unfortunate that the Draw-Tite hitch was not a good fit. I had to take it to a body shop to finish the install. Turns out the left side vertical wall or flange was bent and the technician had to straighten it out. I spent 3 hours with it on the driveway and another 2 hours round trip with the shop. The shop tech said it was the hardest one to install out of maybe a hundred installs. I get all the luck.

Thank you for leaving a review! What sounds like happened is that your hitch became flexed or bent in transit. We have an article with helpful tips and tricks on ways to straighten out bent hitches and I have attached a link for you for future reference.
-- Etrailer Expert Brooke M - 08/30/2021


Very nice hitch, fit great ,looks great, seems very well built " heavy duty" . I work for a company and we have a fleet of trucks. My boss has also bought this hitch and I installed and we are very pleased with your product. We will continue to do business with you. Keep up the good work.

I bought one and my company has bought 3. We are very pleased
Dave R - 01/02/2021
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch

  • Trailer Hitch Recommendation for 2017 Ram 1500 without Factory Hitch
    For your 2017 Ram 1500 1500 without a factory hitch the Draw Tite hitch part # 41948 would be a great option. This is a Class V hitch with a 2 inch opening and a 12k towing capacity. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Availability of High Capacity Trailer Hitch for 2016 Ram 1500
    We have the Draw Tite hitch part # 41948 which is a confirmed fit for your 2016 Ram 1500 and has a capacity of 15,000 lbs but I would be surprised if your truck has this capacity or even the 10.8k capacity you are looking for. Everything I am able to look up says that your truck only could have a max towing capacity of 8,370 lbs.
    view full answer...
  • Will 2016 Ram 1500 with Ball Hole on Bumper Fit with Draw Tite Hitch 41948
    Sounds like your truck has a ball hole built into the bumper which is designed for mounting a hitch ball and you are looking for a hitch to fit underneath that. If this is the case the part # 41948 would be exactly what you would need and would work well. I attached an install video for this hitch on a 2016 Ram 1500 just like yours as well.
    view full answer...
  • Draw Tite Hitch Recommendation for 2017 Ram 1500
    For your 2017 Ram 1500 the Draw Tite hitch part # 41948 is a confirmed fit and would work well as long as you don't have a factory hitch installed already. This is one of the nicest and highest rated hitches we offer for your 2017 Ram 1500 so it would be a great option. This has a max tongue weight of 1,500 lbs. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Does Draw Tite Hitch 41948 Fit 2017 Ram 1500
    Since sometimes there is confusion between what a hitch and a reciever is I think best option would be for you to take a picture of the rear of your truck so that I can see exactly what's going on. Reciever and hitch are the same thing but sometimes people will refer to a ball mount as a hitch or reciever. So what we need to do is clarify the terminology and figure out exactly what you have. If your 2017 Ram 1500 does NOT have a factory hitch then the Draw Tite part # 41948 will fit and...
    view full answer...
    Image 1 for
  • Will OEM Receiver Need to be Removed on 2016 Ram 1500 to Have a Class IV Trailer Hitch Installed
    To install a Class IV trailer hitch, like the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41948, on your 2016 Ram 1500 you will need to have the OEM trailer hitch removed. We do have options like this for 2500 and 3500 pickups but that is for heavy duty towing where dual receivers are required. For your 1500 this is the only way to have at least a Class IV trailer hitch. An installation video and the written instructions have been linked for you to check out.
    view full answer...
  • Trailer Hitch for 2016 Ram Tradesman 1500
    I recommend the Draw-Tite 2-inch hitch # 41948 for your 2016 Ram Tradesman 1500 that does not have a factory hitch. This hitch is rated for 1500-lbs of tongue weight and a maximum of 12K towing weight and it offers no-drill installation as shown in the linked video. The written instructions are also linked and these show how the hitch mounts under your round cross member.
    view full answer...
  • Recommendation for Removing Stuck Ball Mount from Receiver
    The best way to remove a ball mount that is stuck in the hitch receiver is to spray it liberally with WD-40 or PB Blaster, let it sit for awhile, and then alternate hitting it in various directions with a rubber mallet. It is best to let the lubricant sit for a little bit before using the mallet so that it has a chance to work its way into the receiver, and it may take quite a few times of doing this to get the ball mount to release. You can take off the OEM receiver from your 2011 Ram...
    view full answer...
  • How To Install Flat Washer On Carriage Bolt of Draw-Tite 41948 Without Losing Bolt In Frame
    You are correct that when installing the Draw-Tite Trailer Hitch Receiver # 41948 on your 2016 Ram 1500 the flat washer will get installed in-between the hitch and the frame on the bolt closest to the front of the truck that you installed using the fish wire. The trick to make sure you do not lose the bolt is pushing it up very carefully and just enough to slide the washer in. You want to make sure the other 4 bolts holding the hitch up are very loose allow the hitch to sit away from the...
    view full answer...
  • Recommended Trailer Hitch for 2015 Ram 1500 without Factory Hitch
    The trailer hitches available that are confirmed to fit your 2015 Ram 1500 are not the exact model that would have come on the truck from the factory, but they will install the same way and provide similar if not better capacities. Choosing the Class rating for the trailer hitch on your Ram will simply depend on the weight of the items you plan on towing. The Draw-Tite Class III Trailer Hitch Receiver # 75662, which is confirmed to fit your vehicle as long as it does not have the factory...
    view full answer...
  • Class V Trailer Hitch Recommendation for a 2013 Ram 1500
    The hitches we carry for the 2013 Ram 1500 are not also fits for a 2010 Ram 2500/3500. So for your 2013 Ram you would want the Draw Tite Hitch part # 41948 as it is a Class V hitch confirmed to fit.
    view full answer...
  • Can Trailer Hitch from 2005 Dodge Ram Be Installed on 2016 Ram 1500
    Unless the hitch from the 2005 Dodge Ram 1500 is the # 75662 that mounts to the pre-existing crossmember/beam as shown in the provided diagram it won't fit. The 2005 Dodge Ram and the 2016 Ram 1500 have no other hitch fits in common.
    view full answer...
    Image 1 for
  • How is the Factory Trailer Hitch Secured on a 2013 Ram 1500
    I do not believe the information you were given is correct. On your 2013 Ram 1500, there is a center hole in the rear bumper that can be used for a hitch ball if you do not have the factory trailer hitch receiver installed. If you do have a factory trailer hitch receiver installed then this hole is used for a 3/4" bolt to secure the trailer hitch, not a hitch ball (see photo). If you do not already have a factory trailer hitch and would like to install a similar one, I recommend the Curt...
    view full answer...
    Image 1 for
  • Higher Capacity Trailer Hitch Solution for 2017 Ram 1500 with Bumper Hitch
    If by bumper hitch you mean a hole in the bumper that can have a hitch ball installed in it then you can install a higher capacity hitch like the Draw Tite Class IV part # 41948 which has a towing capacity of 15,000 lbs trailer weight. But if instead you have a lower hitch opening below the bumper we wouldn't have a fit for that configuration.
    view full answer...
  • Can Factory Hitch of 2017 Ram 1500 Express be Replaced with Aftermarket Hitch
    If you sourced a new bumper beam for your 2017 Ram 1500 that didn't have a factory hitch built into it you could then install an aftermarket Class IV hitch like the Draw Tite part # 41948. If that was what you were planning on doing you'd be set.
    view full answer...
  • Heavy Duty Trailer Hitch Receiver For 2019 Ram 1500 With Class III Bumper Hitch
    The Draw-Tite Trailer Hitch Receiver # 41913 is the correct heavy duty receiver for your 2019 Ram 1500. This will replace factory installed bumper ball mount style hitch that is on your Ram. I have linked a video below that shows us installing the new receiver on a 2019 Ram Bighorn. This hitch is rated for 1,700lbs of tongue weight and 15,000lbs towing or 17,000lbs towing with a weight distribution hitch. Be aware that this will not increase your towing capacity's given by Ram for your...
    view full answer...
    Image 1 for Image 2 for
  • Aftermarket Trailer Hitch Fits for 2012 Ram 1500 with Factory Hitch
    All of the hitches offered for your 2012 Ram 1500 are for the versions of the truck without a factory hitch. All of these hitches, shown on the linked page, require you to remove the factory hitch. The available options include 2-inch hitches in Class III, Class IV and Class V ratings, such as Draw-Tite # 41948 and # C15572 which are Class V. Both offer no-drill installation as shown in the linked video.
    view full answer...
  • Will Aftermarket Trailer Hitch Increase Tongue Weight Capacity on 2014 Ram Longhorn Limited
    If your 2014 Ram Longhorn Limited features a factory tongue weight capacity of 760 pounds this cannot be increased by adding an aftermarket product like a new trailer hitch. Even if the aftermarket hitch has a higher tongue weight rating, you will still be limited by your truck's base capacity. Other components on the truck such as its engine, transmission, and axle axle ratio all contribute to the truck's capacity so replacing a single part will not actually increase its overall rating...
    view full answer...
  • Trailer Hitch for 2017 Ram 1500 Express with Enough Towing Capacity
    Since your 2017 Ram 1500 Express has a towing capacity of 4,470 lbs since it's a V6 engine model the trailer hitch part # e98852 would easily give you enough capacity to match what your truck is capable of as it has a higher towing capacity than that. This hitch is also super easy to install and is priced great too. I attached an install video for this for you to check out as well.
    view full answer...
  • What Size Bolts Does Hitch for 2015 Ram 1500 Use
    The Draw Tite hitch part # 41948 that fits your 2015 Ram 1500 uses the bolt size 1/2“ – 13 X 1-3/4“ GR5. We offer a way to order replacement hardware for our hitches with part number # RHK.
    view full answer...
  • Does Draw-Tite Trailer Hitch 41948 Fit 2019 Ram 1500 Classic Warlock
    I can confirm that your 2019 Ram 1500 Classic Warlock is compatible with the Draw-Tite Trailer Hitch Receiver # 41948. According to Draw-Tite it is compatible with all models of 2019 Ram 1500 Classic. The only thing to note is that it will only fit so long as you do not already have a factory hitch installed on your truck. I have added a link to a video install as well of the Draw-Tite Trailer Hitch Receiver # 41948.
    view full answer...
  • Trailer Hitch that Can Fit 2019 Ram 1500 with Towing Bumper
    We have the etrailer hitch part # e98852 that we have installed on a 2019 Ram 1500 Classic that had the factory tow bumper like you can see in the attached picture. This would work well for you and would install very easily.
    view full answer...
    Image 1 for
  • Trailer Hitch Recommended for 2018 Ram 1500
    I'd recommend the Curt # C15572 which is the highest capacity hitch we offer for your truck, 15000 lbs towing or 1500 lbs tongue weight (maximum downward force that can be safely applied to hitch). If weight distribution is used, the capacity rises to 16000 towing/1600 lbs tongue weight. This hitch provides a 2 inch receiver. You can check out an install video by using the provided link.
    view full answer...
  • Longest Hitch Extender that Can Fit Hitch of 2016 Ram 1500
    For 2 inch hitches that fit your 2016 Ram 1500 like the # 41948 the longest option we have is 18 inches part # HE18. We don't have any longer options so hopefully that would be long enough. This will reduce the tongue weight capacity of your hitch by 50 percent due to leverage and additional movement.
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.