bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24763
lowest price pledge
Retail:$318.56
Our Price: $170.76
You Save: $147.80
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
24763 - Visible Cross Tube Draw-Tite Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24763 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (290)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24763

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24763 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60822 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24763 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24763

Average Customer Rating:  4.7 out of 5 stars   (290 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
2011 Honda Civic

Installed this hitch on my 2011 civic lx sedan. I used two jacks with a 2x4 in between to lift the hitch into place, which made things much easier. The handle nuts were the reason I bought this hitch over others, and they were worth it. I did have to drill out the hole on the exhaust side. My biggest issue was that the hitch covered one of the exhaust heat shield screw holes, though that wasn’t supposed to be the case according to instructions. Since that screw is the primary one of the four that holds the heat shield off the muffler, that was a bit annoying. I ended up threading metal wire through that hole and around the hitch and twisting it tight to keep the heat shield off of the muffler. Shouldn’t be a big deal, but it did complicate the install. Probably should’ve taken the hitch back off and sandwiched the shield between the hitch and the frame. Overall, I’d give this hitch 4.5 stars if I could.


Comments
Great!
Robert - 12/09/2021


by:
Honda Civic

We got our Drawtite hitch from etrailer and I was able to install it myself with the help of their Youtube video. We use it to attach the bike carrier that my parents gave us and also a platform that expanded our cargo capacity immensely! There's no way we could fit all of our camping, fishing and canoeing stuff in little Honda Civic without the Drawtite hitch and platform. Would gladly recommend this hitch to anyone with a small car wanting to expand carrying capacity.




by:
2012 Honda Civic

I bought the Draw Tite hitch (24763) for a 2012 Civic coupe a few weeks back and managed to get FREE 2 day shipping. That same day I ordered a Thule Apex Bike rack on a separate order (3-5 day shipping) and I was surprised to have them both two days later!

The ordered parts were all correct but I was a bit confused at first because the website differentiated between 2012 Honda coupe not Si and Hybrid although it seems it works for all models ( instructions provided information to include Si and Hybrid models). It took awhile to install and was relieved to find out I did not have to drill any holes or make them larger. If you buy this product and install it yourself make sure that the U-bolt part fits all the way up otherwise your arm bolts will be misaligned with the frame.

Since I thought I had ordered the incorrect product I called etrailer.com and spoke with Sam about the issue. He was able to help me out and provide more information on the product and order number. I was able to go to Draw Tite's website and get additional information to see if my model required drilling.

If you happen to lose the instructions, the Draw Tite website will give you a way to print out the instructions. I also recommend watching the youtube video to make it easier otherwise you will struggle like I did.

Overall the installation to about 2 hours since I had difficulty aligning the holes and trying to determine if drilling was required.

From start to finish I would recommend this company for their dedication to getting your product to your door in a timely manner. If any issues arise they are great at helping resolve your issues within minutes of placing the call.

I would definitely recommend this website to friends and any future customers that are researching etrailer.com for quality services.

Hope this review helps you all out!


Comments
This is an awesome product! I have not had any issues with the trailer hitch. The only thing that I have done is checked the bolts to ensure that they remain tight. After a year of owing it I would definitely still rate it as 4 stars and recommend it to friends.
AC - 04/22/2017


by:
2012 Honda Civic

This hitch installed easier than my last one. It took me 1.5 hours by myself, with car up on ramps. Another set of hands just to steady things would have cut 30 minutes off the install. I had to trim the heat shield after the hitch was up. Much easier than I expected. Mark with a Sharpie and cut with tin snips. The metal was so thin, I think heavy scissors would have cut it.

I like the "U Bolt" attachment to the tow hook. It takes the weight off of your arms for the rest of the install. The "handle nuts" are a really great help. You can hold the handle nut while you screw the bolt up into the nut. Much easier than the "fishing wire" of my last Honda install.

No drilling required on my 2012 Honda Civic EX.


Comments
All bolts still tight. Hitch is doing well! The little Civic pulls it like its not even there.
Mike C - 08/25/2016


by:

The hitch was slightly too fat for the receiver and wouldn't go in all the way. The Uhaul intaller used a grinder to shave it just a bit so it would slide in. He said he has seen this before with Draw-Tite hitches. The hitch works fine, but rattles a little. Knowing what I now know. I'd choose a different brand. My 2 star rating refers to the product and not to etrailer. The purchase process with etrailer was excellent.


Comments
You mentioned that the hitch is working however it rattles a little. I recommend using an anti-rattle device such as part # RM-061-125
Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
$31.29
or an anti-rattle lock like part # SHP2082
SilentACT Anti-Rattle Trailer Hitch Lock - 1-1/4" and 2" Hitches
$41.43
. The lock can be used with hitch accessories that have hollow shanks.
-- Etrailer Expert Jenny N - 06/03/2022


by:
2010 Honda Civic

Basic hitch simple to install. A second set of hands a a few key moments make it easier but a floor Jack and a impact socket help.

Install the center bracket first then the side bolts make sure to put the exhaust mounts back before you bolt up the right side.

Wiring is plug and play super simple. If you are careful the retainers can be reused. Easier to just order new ones.




by:

Went on fairly easy. Should do the job to hold a bike rack. The hitch arrived pretty scratched up.


Comments
I will have our customer service team reach out to you. I recommend touching up the hitch with a rust resistant paint which you will have on hand for regular hitch maintenance.
-- Etrailer Expert Jenny N - 12/13/2021


by:

I am reviewing the trailer hitch receiver AND the etrailer customer service.
First off, the trailer hitch installation was straightforward, and the videos showed me exactly how to do it. I was able to install it myself, using my hydraulic jack at certain points to help me lift the hitch into position to bolt it in place. Please see the pics below.
The customer service at etrailer is phenomenal! My order was upgraded to express shipping as a nice unexpected treat. I ordered the hitch receiver and also a bike rack. Both items arrived two business days later! However, there was a problem: the bike rack didn't have the included hardware kit (bolts, nuts, pins, etc.). Here's where I was impressed- etrailer reps immediately rush shipped me the missing hardware kit, and were absolutely pleasant on the phone and in emails. I am extremely impressed with this company, and will be ordering again. I highly recommend etrailer.com! Thanks!




by:
2013 Honda Civic

I bought this primarily to attach a heavy-duty Thule platform-style bike rack to my 2013 Honda Civic. It fit the car perfectly and works like a charm.




by:

Perfect hitch to hold my bike rack/bikes. This was the first hitch I installed and install was pretty straight forward. The hitch has held up well and has carried my bike rack with two bikes at times. The hitch bolts haven't loosened at all since the install and the bike rack has been installed at all times.

I would recommend this hitch to anyone looking to add some functionality to their car.


Comments
Product is still holding up well, no complaints
Dustin - 02/01/2022


by:
2013 Honda Civic

Installation was much more difficult than advertised. The exhaust blocks access to a bolt and is incredibly difficult to torque down. Otherwise, fit was great and the hitch seems sturdy.




by:

It’s overkill for my bike rack, but it’s been an excellent purchase and relatively easy install.




by:
2011 Honda Civic

Very solid and quality is evident. My son and I installed on his 2011 Civic sedan LX in about 75 minutes with the rear of the car on ramps. No way would I want to do this as a one person job! The 3 minute video was very helpful. The two departures from instructions we did were 1) removed threaded fastener on drivers side rather than pop out fastener for the plastic shield because the pop fastener was brittle and would have broken. It required a little more jockeying to get the hitch under the plastic, but we did it before fastening the center u-bolt. And 2), replaced the outer rear heat shield metric screw with a longer one since the hitch spaced the shield too far from the frame for the original to reach.


Comments
No problems one year in - great purchase!
Sam B - 12/13/2021


by:

I bought this last year for my 2013 Honda Civic. Installation was pretty straight-forward. I watched the etrailer YouTube video as well as a YouTube video from another shop a few times each to make sure I had the process down before starting. It's been over a year since I installed it so I don't recall exactly how long it took me but I believe it was between an hour to an hour and a half from jacking up the car to being completely finished. I installed it by myself which made the process quite a bit harder in a couple of spots. If I had an extra set of hands I could have probably shaved 20 minutes or more off of that time. I've never installed a hitch before but for my car it wasn't too bad. I'm using it in combination with a Hollywood Trail Rider 2 Bike Rack and I've had zero issues with the hitch. I've added a couple of recent photos so this is what it looks like after a year of use.




by:
2004 Honda CR-V

I installed the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" on my 2004 Honda CRV. This is the second trailer hitch and wiring harness I have purchased from etrailer. The installation video made the installation easy.
The hitch fit perfectly and did a great job pulling a small Uhaul trailer. etrailer has a nice web site and I highly recommend them.




by:

It was a right part with all you need to install. They also had video tutorial that helped a lot! Thanks!




by:
2008 Honda Civic

I bought this hitch to install on my 2008 Honda Civic LX. The instructions were good and the only problem we had in installing the hitch is that we had to use a farm jack (see attached photo) to spread the hitch out about 1 inch. We did this because the holes of the hitch were not lining up w/ the holes in the frame of the car. After spreading the hitch, it installed w/out difficulty. We had to cut a small piece of the plastic cover (I think it was the fuel tank cover) that the hitch goes underneath in order for the hitch to fit, but that was a simple cut. Took us about an hour to install. We have used the hitch/cargo carrier for 2 long distance trips and haven't had any trouble.




by:
2014 Honda Civic

Took a bit longer than anticipated but the final results look good.

My 2014 Civic has about 6 plastic clips and three 10 mm screws that hold the plastic tray in place - more than is depicted in the video.

Thoughts:

1) Use silicone spray to help with muffler gasket removal. Yes, car is only 5 months old but I was able to easily remove and replace the gasket using only my hands.

2) Dry fit everything before attempting final install. Using hay twine to hang the hitch from the car hanger provides support AND movement.

3) Had to grind about 1/8 inch from the handle nut on the heat shield side. Appears to be a welded nut in the tube where the heat shield screw tightens and this was restricting a clear shot at the nut.

4) Hang a loop of string from the handle nuts so one can more easily initially thread the bolt into the nut. Pulling down on the string keeps the handle nut from slipping. This is especially important on the driver side as one has to reach up through the plastic tray.




by:
2015 Honda Civic

Ordered the Draw-Tite 24763 for my 2015 Honda Civic Sedan, and was very satisfied at the speed and detail of not only the correspondence and email between etrailer.com but also the shipping speed and condition of packaging. I received this in six days from start to finish of order. I did not spring for faster shipping and was satisfied with this type of time frame considering the size and weight of packaging. I also got the Thule Hitching Post TH934XTR four bike rack and THSTL2 hitch lock anti-rattle device. I had planned ahead by watching all of the great videos on etrailer and printed out some instructions from the site. I guess I shouldn't have been surprised with their attention to detail that this was unnecessary as they included a copy of the same instructions I printed in the box. The install went exactly like the instructions/videos said it would and if I hadn't been interested in getting the beauty plastic underbody piece back on I could have been done in fifteen minutes with a lift and another set of hands. All in all a very easy kit to install, and thanks to etrailer for the speed, quality, and including all the necessary hardware and instructions. 5/5 would definitely do business with again and recommend.




by:
2014 Honda Civic

I mount ed this hitch onto my 2014 Civic EX-L in about 2 hours. no problems at all. Directions were pretty straight forward. only hard part was bolting it above the muffler which had to be moved and bolted in dangling a bit. I was considering changing my bumper to the SI bumper. not sure if the hitch will still fit properly. One day I'll pull the measurements




by:
2009 Honda Civic


The hitch installed. The job took a
little over an hour and I saved $150 by doing it myself. Overall, it was pretty easy, but I'd recommend finding a buddy to help you hold the hitch in place when you bolt it to the frame. You'll also need a 3/4 socket for the frame bolts and I think either deep 7/16 socket or just regular wrench for the middle bracket bolts.

For 2009 Civic LX (not hybrid), NO cutting, drilling or other modifications required whatsoever. I just installed the heat shield and plastic shroud on top of the hitch.




by:
2012 Honda Accord EX

Product arrived via UPS Ground on 8 Feb, perfect condition, necessary parts all there.
The installation took me just over 60 minutes. I would suggest you inform customers for this product on a 2012 Honda EX coupe of 2 prerequisites: one that a conventional shop-type vehicle lift is available and two that it be a 2 person job. I could have cut the install time in half with an assistant.
Everything fit okay, very tightly, no slack, but then who wants slack in a trailer hitch? I don't intend to be pulling any trailers, just using my bike rack in the receiver.
Working alone, it went together best for me to first fasten the U-Bolt (step 6 on your install instructions), then next the driver's side and the u-bolt loose then when all 3 fasteners are threaded tighten to torque specs one at a time.
3 sockets, a couple of extensions and a ratchet are required: 19mm for the 2 frame bolts, 15 mm for the u-bolt and 10 mm for the bolts holding the heat shield.
Photos show the job at the beginning, completion, and the view from the vehicle rear with the completed install.




by:
2012 Honda Civic

Exactly what I needed for 2012 Honda Civic easy install




by:

The hitch receiver mounted perfectly. I discovered that you need to drill through the heat shield, or just clip it around the receiver. A self taping screw could be added through the shield if needed.




by:

Comes loose


Comments
If your hitch is coming loose, we recommend cleaning the bolt threads then torque the bolts to the specifications listed in the installation instructions.
-- Etrailer Expert Katrina B - 08/19/2022

25
291
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch



  • Spray Painting Recommendation for a Hitch with Scratches on it From Shipping
    Sometimes in shipping the hitches can get a few scratches or nicks on the surface. I would go ahead and hit them with some black spray paint, especially if you live up north and get snow and the salt that goes along with it. I attached an FAQ article to the right on rust prevention that you may find informative as well.
    view full answer...
  • Does Trailer Hitch for 2011 Honda Civic Come With Instructions?
    The trailer hitches do come with instructions and I have also linked the installation instructions and an installation video for the Draw-Tite # 24763 which fits your 2011 Honda Civic so you can see the process involved and if you might be comfortable doing it yourself. Otherwise, any local mechanic should be able to do it without much difficulty.
    view full answer...
  • Is Modification Needed to Install Draw Tite Hitch on 2013 Honda Civic Coupe
    To install the Draw Tite part # 24763 on your 2013 Hond Civic Coupe you'd need to enlarge a couple access holes in the frame, lower the exhaust temporarily and modify the heat shield slightly. I attached an install video for this for you to check out as well.
    view full answer...
  • Best Trailer Hitch for a 2013 Honda Civic
    If you have a sedan that is not an "Si", I recommend the Draw-Tite Sportframe Trailer Hitch Receiver Custom Fit # 24763. This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Important things to remember when installing is that no drilling is required for installation. Access holes may need to be enlarged by drilling, filing, or rotary tool....
    view full answer...
  • Draw-Tite Hitch # 24763 Installation on 2015 Honda Civic LX Sedan
    Thank you for your recent hitch purchase. According to the written instructions for Draw-Tite Class I hitch # 24763 the driver side plastic shroud is to be loosened by removing a plastic rivet. With that plastic piece loosened, you'll then raise the hitch up into position and slip the driver-side mounting flange in between the frame rail and the plastic shroud. The passenger-side flange goes between the frame rail and the exhaust heat shield. The linked install video shows a 2012 hybrid...
    view full answer...
  • Availability of a Hitch for a 2012 Honda Civic Natural Gas Sedan
    I spoke to our hitch manufacturers and none of them could confirm a fit for the Natural Gas models of the 2012 Honda Civic because of how rare the car is and they were under the understanding that the tank was at the rear of the vehicle and would interfere. The best I could do is give you the dimensions of the Draw Tite hitch part # 24763 for you to compare to your vehicle to see if it would fit. I also attached an install video for this hitch for you to check out as well.
    view full answer...
    Image 1 for
  • Trailer Hitch for 2008 Honda Civic
    We do have hitches that will fit your 2008 Honda Civic. I'd recommend the Draw-Tite Class I, part # 24763. I'm sorry to say that the hitch you have for a 7th generation Civic (2000-2005 model years) won't fit an 8th generation model (2005-2011). The primary reason is that the exhaust on the 8th gen vehicle sits in a different spot which would prevent a hitch from a 7th gen model from installing. I've linked you to a video showing the hitch I recommended being installed on a 2008 Civic.
    view full answer...
  • Why Isn't A 2 Inch Hitch Available for a 2014 Honda Civic
    All the hitches available for the Honda Civic are a Class I, which uses the 1-1/4 inch receiver tube . Hitches that use the 2 inch receiver have a much higher capacity than the 1-1/4. Unfortunately, the structure of the vehicle where the hitch installs is not capable of withstanding this higher capacity. If somebody were to install a 2 inch hitch on the Civic, and use a product with a higher rating, the hitch could literally be torn off the vehicle. This is why there isn't a 2 inch hitch...
    view full answer...
  • Does Muffler Need to be Removed to Install Draw-Tite Trailer Hitch Receiver on 2007 Honda Civic.
    Technically the install is the same on all three model years. However, the installer did not raise the tailpipe tangs when raising the hitch in the video of the 2008. So to keep from having to remove the hitch he temporarily removed the muffler. The instructions say to perform this step in bold now so the tangs are intended to be raised with the hitch. The instructions were updated in 2015 so my guess is that this step was added. The instructions are linked for you on this page. When...
    view full answer...
  • Trailer Hitch Receiver For a 2007 Honda Civic Si Coupe with Invidia Exhaust/Muffler
    I reached out to Draw-Tite for their Sportframe Trailer Hitch Receiver # 24763 and they confirmed that it is designed to fit your 2007 Honda Civic SI Coupe with the sport style exhaust. While they did not have any notes showing it not fitting with the Invidia exhaust they cannot confirm that it will fit without issue. I have included an image sent in with one of our reviews that you can use to compare to the Invidia exhaust you have to determine if you have enough room for the receiver.
    view full answer...
    Image 1 for
  • Differences Between the Draw-Tite Hitches # 24861 and # 24763 for a 2009 Honda Civic
    The main difference between the Draw-Tite Hitch # 24861 and the Draw-Tite Hitch # 24763 is the design of the cross beam and the hitch opening. The # 24861 features a straight beam that the hitch opening is welded to. The # 24763 has two angled beams that are welded on either side of the hitch opening that is shorter than the hitch opening on the # 24861. Check out the pictures I attached to see the differences. I attached installation instructions and an installation video for the #...
    view full answer...
    Image 1 for
  • Isolating Wiring Ground Problem to Vehicle or Trailer
    Ultimately all grounds on your trailer are referenced to the tow vehicle's battery negative terminal. The main trailer ground pin on your trailer's plug connects to the vehicle socket ground pin and that wire then runs to the vehicle frame, where the battery is also grounded. So in the end all things ground to the vehicle battery negative terminal one way or another. You could have a ground issue on the trailer, vehicle or both. It is easy to test to find out. Simply disconnect the trailer...
    view full answer...
  • USA Made Trailer Hitch Recommendation for a 2005 Ford Ranger 4x4
    Curt trailer hitches are made in the USA so for a Curt hitch for your 2005 Ford Ranger you would want the part # 13138. I attached an install video for you to check out as well.
    view full answer...
  • Replacement Hardware for Draw-Tite Trailer Hitch 24763 for a 2012 Honda Civic
    You can get replacement hardware for Draw-Tite trailer hitch # 24763 for your 2012 Honda Civic. You will need # RHK. On the RHK page enter the hitch number and select the manufacturer where indicated to get the right hardware for the hitch. I have included a link to the installation instructions for the hitch and a link to a video showing an example installation.
    view full answer...
  • Replacement Nuts and Bolts for Draw-Tite Hitch on a 2008 Honda Civic
    We have a product page for replacement hitch hardware. It's part # RHK. Under the listed price, there are two fields to enter information. In the Hitch Item Number box, enter 24763. In the Manufacturer box, select Draw-Tite. This will send out a replacement kit for everything you need for the hitch. Of course, this is the full kit as we don't sell the individual components on their own. After reviewing the installation instructions, this particular hitch uses 1/2-13 handle nuts and 1/2-13...
    view full answer...
  • Replacement Hardware for the Draw-Tite Sportframe Trailer Hitch Receiver Part # 24763
    Yes we do have replacement hardware kits available. Use the Replacement Hardware Kit for Trailer Hitches part # RHK. When ordering it will ask for your hitch part number this will be part # 24763.
    view full answer...
  • How to Get Replacement Installation Hardware for the Draw Tite Hitch # 24763
    There is a way to get new installation hardware for your # 24763 hitch. All you need is the part # RHK. You will need to select the hitch manufacturer from the drop down menu (Draw-Tite), and then enter the hitch's part number in the box and hit add to cart.
    view full answer...
  • What is the Proper Rise/Drop Ball Mount for a 2006 Honda Civic
    The recommended drawbar for a 2006 Honda Civic with Class I hitch is part # 3593. The hitch manufacturers recommend draw bars based on the weight capacity of the hitch and vehicle and the trailer coupler height of trailers that fall in that weight capacity. Part # 3593 is the proper amount of rise for most trailers that fall under 2,000 pounds. The rise on part # 3593 is 2-1/8 inch so if this rise will not keep the trailer level, chances are that trailer should not be towed with your vehicle. The...
    view full answer...
  • What Bike Rack Fits the Draw-Tite Hitch 24763 for a 2007 Honda Civic
    Unfortunately what you described is intentional. Your Yakima Ridgeback is designed for Class II and up trailer hitches and the Draw Tite Hitch part # 24763 that you have on your 2007 Honda Civic is a Class I hitch. The weld-stop in the hitch is designed to prevent a Class II accessory from being installed. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use...
    view full answer...
  • Best Option for Carrying Bikes with a 2012 Honda Civic
    Some vehicles have soft bumpers that can dent easily when carrying a trunk mounted bike rack. For these vehicles we strongly recommend the use of a hitch mounted bike rack as this will make no contact with the vehicle. For a hitch for your 2012 Honda Civic you would want the Draw Tite Hitch part # 24763. I attached an install video for you to check out. The most popular bike rack we carry that would work well for you would be the Swagman XTC2 bike rack part # S64670. See the review video...
    view full answer...
  • Trailer Hitch for 2008 Honda Civic for a Swagman XC Bike Carrier
    Yes, we do have trailer hitches that will fit your 2008 Honda Civic and that will be compatible with the Swagman XC bike rack # S64650. The most popular option is Draw-Tite hitch # 24763. This is a Class I hitch rated for 200 pounds tongue weight, the amount of weight that can be suspended from the receiver. The bike rack weighs a little less than 30 pounds so you will have plenty of capacity left over for the bikes. I have linked a video to the right showing the hitch being installed...
    view full answer...
  • Best Single Bike Rack for a 2012 Honda Civic
    The best bike rack to carry one bike with your 2012 Honda Civic is the Thule T1 # TH9041. This bike rack is compatible with Class I-III 1-1/4" and 2" hitch receivers, is made right here in the USA, and comes with a limited lifetime warranty. The T1 can carry 1 bike up to 65 lbs with a max wheelbase of 48" and max tire width of 5". Since it is a wheel mount bike rack it can accommodate any bike frame style that doesn't have a front fender. The wheel mount is also great because it eliminates...
    view full answer...
  • Recommended Bike Rack and Trailer Hitch for a 2012 Honda Civic
    In order to carry a bike on your 2012 Honda Civic, I recommend using a trailer hitch and hitch mounted bike rack. This option will give you the greatest variety of carriers to choose from, it will provide the easiest way to load/unload your bike, and you can always swap out the bike rack for a cargo basket or small trailer. In order to do the above you are first going to need a trailer hitch for which I recommend the Draw-Tite Sportframe Trailer Hitch Receiver part # 24763. This hitch...
    view full answer...
  • Is Stabilizing Strap Also Required for Draw-Tite Trailer Hitch on 2010 Honda Civic
    You are correct. The Curt Class I Receiver Hitch # C11391, which is confirmed to fit your 2010 Honda Civic, requires you to use an additional stabilizing strap for non-trailer loads, such as bike racks and cargo carriers. This is simply an additional safety measure that Curt takes with their lower Class I and Class II trailer hitches, and is not necessarily an indication of the hitch's strength. Draw-Tite does not have this same requirement, so the Class I Sport Frame Receiver Hitch #...
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Rick A
Test Fit:
Rick A
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Jacob H
Video by:
Jacob H
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010