bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

lowest price pledge
Retail:$282.87
Our Price: $157.70
You Save: $125.17
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 26 lbs
Quantity: 
In Stock
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" 200 lbs TW 24914
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24914 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (132)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • Draw-Tite
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24914 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60346 Hidden Hitch Class 1 Trailer Hitch Receiver

Item # 24914

Installation Details 24914 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24914

Average Customer Rating:  4.8 out of 5 stars   (132 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
2014 Mazda 3

This hitch is just what I wanted for my 2014 Mazda 3 hatchback. Finding the right hitch was easy on eTrailer, and from placing my order it was about a week until the hitch arrived. The assembly kit and instructions were well organized, clear, and easy to understand. The included guide wires for getting one of the pairs of bolts positioned correctly in the frame are essential; I really don't know how those bolts could be put in place without them. I will say that I found it necessary to drop the exhaust in order to slide the hitch in next to the frame rails. A little soapy water and a crow bar make that easy enough, just be sure to support the exhaust system with a strap before popping off the rubber isolators. I'm using the hitch to mount a 1up bike rack with a 1.25" mount, and it works perfectly.


Comments
My hitch is still working great a year later. I've checked the tightness of the bolts a couple times, with no evidence of them loosening up over time. This has been a great product for carrying my bike around on an easy-to-access hitch rack.
Brent - 05/25/2022

by:

Overal fit and finish was excellent. A couple of minor paint chips from shipping. This is a pretty beefy piece, so while you can install it by yourself, I wouldn't recommend it.
One tip and one revision to the instructions on a 2017 Mazda 3.

Tip: go buy a tool for removing exhaust hangers. About $20 at [auto store]. It will save your sanity and halve the time the job takes.

In the instructions step 5 is to insert the m12 bolt and step 6 is to put the exhaust back. The 2017 has two sets of hangers each side, and the one on the muffler is not accessible once the m12 bolt is in place. Loosely install the carriage bolt nut, then the exhaust hangers, then the m12 bolts.
I'd also suggest removing the exhaust hangers completely, as reinstallation is much easier when you push the hanger on both pins simultaneously.
You need a 19mm short socket and a 11/16" deep if you're using socket wrenches.



by:
2017 Mazda 3

Good price, great online video at your site for installation, and very clever wire tool for threading bolts.

Was dismayed to find the paint did not adhere properly in several places. Hoping rust won’t shorten the useful life of the product.


Comments
Any bare metal will need to be covered with anti-corrosive paint. Here is a help article with more tips regarding the prevention of rust:
-- Etrailer Expert Sierra K - 11/02/2021

by:
2018 Mazda 3

Overall a good purchase and experience from ETRAILER. The hitch arrived somewhat loosely packed and there was some minor scratches and chips. Not a deal breaker, but I think etrailer buys a pallet of these hitches and repacked them, so the fault is not on the manufacturer. It took some time to figure out which holes to fit the bolts to and getting the hitch into position is TIGHT! I ended up removing the muffler which gave me a lot more space. The real issue was the hitch was slightly bent and would not fit between the frame rails. A quick call to etrailer and they advised how to proceed, shout out to Molly S. for the help. The hitch fit great with zero interference and a quick coat of black spray covered up the minor damage. Very happy with the fit and customer experience!


Comments
Zero issues a year later!
Victor K - 08/24/2019


by:

We use it to mount a bike rack large enough for 2 bikes and use it most every weekend. Works every time. No issues.

Will be buying another hitch for a new vehicle purchase soon.



by:
2019 Ram 2500

I ordered this product because I was moving cross country and wanted to trail a 4x8 cargo trailer behind my Mazda3 hatchback. I purchased this trailer hitch receiver with the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector and the whole package took my boyfriend and I a couple hours to assemble. The move cross country took us from Colorado, east and up into Canada, and back south into New England - over 2500 miles. This was in March 2019. We had no issues and I still have the trailer hitch and wiring in my car. I use it occasionally for our trailer hitch bike rack, and will be ready to tow again if needed in the future!



by:

I haven't used the hitch yet but I have installed it and the first thing that needs to be stated is that I did NOT have to mess with my exhaust to install this hitch. It just rolled right into place.
Job one was to peal away the tape that covers the horizontal bolt hole and to remove a little of the coating in the rear corners where the arm will bind up if that extra coating isn't removed.
The rest of the install went smooth as can be so I don't see much point in explaining the install further.

FWIW The 1 1/4 x 2" adapter with a 4 1/2 raise PN 70355 won't fit this hitch (The stop won't allow the insert in far enough for a pin to secure the adapter.) I'll be talking to the nice folks at etrailer about how to proceed.




by:
2017 Mazda 3

I'm a novice user, never had hitch rack before. I used to carry my bikes on a roof rack, or once with strap-on trunk rack. Both methods damage the car paint. This time I decided to go with hitch mounted bike rack. I have new Mazda 3 hatchback 2017. I called my Mazda dealer service department, but they said that Mazda do not provide a hitch receiver for my model. By chance, I stumbled on etrailer site and found that such receivers exist. Site is informative and has good video reviews of their products, including impressive tests footage. That assured me in quality of their products and services. Etrailer recommended to me hitch receiver model 24914. Manufacturer description and customer reviews were very helpful to assess scope of work needed to mount the receiver and how to locate hidden mounting holes. Some users would report 30 min do it yourself installation job.
Named receiver was in stock and I got it in four days Ground from Mid-west to NJ. I was greatly impressed with packing job by etrailer, part was safely secured inside the shipping box resulted in no scratches on the part paint, good job shipping department!
It was raining here, so assembly from the wet ground was not an option. First, I went to the local professional hitch company. They gave me quote of $74 and hour wait time, but scheduled for the next day. I stopped to get gas and noticed a free bay at gas station mechanic. I asked him to help me to mount my receiver, he was very friendly and my car went up on a lift. I immediately found hidden behind coating horizontal mounting holes, then we eased in the receiver to see an interference with exhaust box and pipes. It went in easy, no exhaust dismount was needed! :) The receiver kit had special steel wire guide wires, I threaded them to the vertical carriage bolts and mechanic in no time pulled bolts and plates into the mounting holes. All four bolts were tightened in no time. It took us 15 min to fully mount the receiver, thanks to good, informative manufacturer instruction sheet and exhaustive customer reviews, thank you reviewers! Mechanic even refused to charge me for the job, but I slipped some candy money to him anyway.
The receiver has an ample clearance (~an inch) to the exhaust ( see pic), I hear no rattles while driving around. My car is snow white, I was afraid, that black receiver will clash, but installed, it is recessed and doesn't stick out at all (I only have pic with rack attached to receiver, sorry).
I'm very happy with etailer services, and greatly admire ingenuity of the receiver manufacturer who figured out how to design a complex part and the product quality which fits like a glove!
I attached three pictures:
Two receiver attachment points on one side
Clearance between receiver and left exhaust pipe
Receiver with 59400 etrailer bike rack mounted



by:

Super fast an easy to install. My husband was injured when we received our hitch so I decided to install it so we could hook up our bike rack. He helps find the holes that were coated over the frame, but other than that I handled every part of the install. The hitch is lightweight enough that one person can handle it and once you find the holes it goes quickly. The manual is very helpful for determining where the frame holes are despite not being able to easily see them. This took me less than a half hour to install and has handled excellently over the last year holding both our bike rack and hauling our utility trailer.



by:
2017 Mazda 3

Installed on a 2017 Mazda 3 hatchback. It took about an hour and a half to install by myself. I did not drop the exhaust as I was able to just force the hitch into place by pulling the exhaust down and stretching the hangers a little. It took a while to wiggle it into place, but I think it was still easier than dropping the exhaust. Once installed, it looks and functions great. I paired the hitch with the Kuat Transfer 2 bike rack.



by:
2014 Mazda 3

I have a 2014 Mazda 3 hatchback that I want to use a hitch style bike rack on. Very easy to install (especially with the etrailer
video that was available for my vehicle on [website]). Looks great!



by:
2017 Mazda 3

This hitch fit my car ('17 Mazda 3 Hatchback) perfectly. The car was apparently designed to accept a hitch which surprised me as my owners' manual says the car is not rated for towing at all. But it had bolt holes and everything ready. The videos eTrailer has helped me, especially the explanation of how to fish the carriage bolt and plate up into the frame and out the correct hole.

I don't have a trailer to pull but I bought the hitch for my hitch mounted bike rack.



by:
2017 Ford Edge

Receiver fit my 2017 Mazda 3 GT perfectly. Instructions were well written, and the parts were built to the right dimension. Although the instruction says to drop the muffler, I was able to install the receiver by pushing on one edge of the bumper cover. Install time was just over one hour using hand tools and working on the garage floor (no lift).

The only con is that the receiver is not as hidden as I hoped for. It would be nice if it was more recessed with a detachable hitch tube (is that what it's called?).



by:

My etrailer experience has been very positive. Before placing my order for a hitch, I had questions about the product. I received very timely answers from the knowledgable staff. I placed my order and received the hitch 1 day sooner than estimated. The easy to follow instructions allowed the hitch to be installed in less than 45 minutes. I think it could actually be done in less than 30 minutes.



by:

Delivered in poor condition and missing all hardware.
Lack of out going quality control. Read further for details.

The chunk of steel that is the hitch receiver itself is a nice product. Think walls, good welds and nice powder coat. But the handling the that it endured to either come from the painter to etrailer (or possibly etrailer to the box was not good.
I called etrailer to ask them if they ever ship used items and they explained to me that sometimes the receivers are damaged from the trip to the retailer. etrailer refunded me the amount of a can of spray paint to make sure the metal wouldn't rust. I brushed that off and said sure I will file it and paint it. I soon realized I was missing all of my hardware and spent the good portion of my day, driving to every hardware store in town to buy 12mm x 1.25mm nuts and bolts. cut down plate to slip in my cars frame. Weld the nuts and bolts everything in place.
I probably wont buy anything from etrailer again.


Comments
Thank you for the review. Our customer service team should be reaching out to you in the near future.
-- Etrailer Expert Brooke M - 09/22/2021

by:

Perfect fit, easy installation. Between the included instructions and online video, it was a quick process. I bought it to use with a bike rack and it’s been great.


Comments
One year in, still very happy with my hitch. Zero movement, still looks new. Hold my bike rack very securely. After seeing mine, a friend got one for his car too.
Phil R - 01/14/2021

by:
2018 Mazda 3

The hitch and brake light harness installed without issue and works flawlessly.



by:
2017 Mazda 3

Hitch fits perfectly. Just put it on. Little tricky getting the back muffler mounts back on behind the hitch bar but still doable. Soap and water helps a lot. The bolt wires are a life saver.



by:

I got this for a four bike rack. I’ve had 3-4 bikes on it quite often and it’s sturdy. You can barely see the hitch



by:
2022 Mazda Silverado 1500 LTD

Fit perfectly and is hardly noticeable on my Mazda hatch back. Arrived on time and in perfect condition. etrailer is my go to place for all my trailering needs.



by:
Mazda Protege5

My second hitch purchased from etrailer for a Mazda hatchback (first '02 Protege5, now '15 Mazda3). Both good experiences.

Very easy hitch install, the inclusion of the fish wires for the frame hanger bolts is a stroke of genius. Don't be afraid of the exhaust isolators, just spray some soapy water and support muffler with a jack or strap. If you can change a flat tire then you can work a wrench well enough to do this in an hour.

'14-15 Mazda3 has a couple of things making wiring easy to integrate. There's a grommet in the left rear quarter floor that's perfectly placed. Just trim some electrical tape to allow an opening, clip the new connector near the lighting adapter & reconnect inside after fishing from outside. I ran power neatly along driver's side rocker & out through the firewall. It's both easier and less vulnerable, just fish one more wire through the mass that exits above the driver's left foot. (Just DO NOT use anything sharp, you don't want to nick any wires and short something out). Finally the battery on my car already had several open connections to use right at the positive terminal, each protected by a fusible link no less! (See photo.) All I needed to add was an M6 stainless nut to connect the new wire.

Only a couple of minor downsides:

Aesthetically this is one of the uglier installs, mostly because the 3's huge muffler is right against the rear valence, leaving no room to tuck anything out of sight. My Protege5's hitch was entirely hidden except for the receiver. Here, unless you're willing to butcher your bumper cover (assuming there's a hitch made to fit that way) you're stuck with what you see in my picture. I saw the round-tube alternative on another similar car and it looked a little better, but that one requires support straps for a rack with any carrying capacity.

Design-wise I ran into one surprisingly annoying thing the first time I went to insert my drawbar. The hole in the receiver for the hitch pin is set really close to the hitch frame, and there's a gusset plate on top, which leaves basically no room for the clip that secures the pin. My existing clip didn't fit at all until I ground the ends a little. The clip that came with the new hitch sort of fit, but only jammed up against the hitch so hard that it scratched right through the protective powder coat. Weird in a product from such an experienced manufacturer, but easy to rectify.



by:
Mazda

This hitch fits well and and is very sturdy on a 2018 Mazda 3 HB Sport. I purchased this over the Curt model because it uses the factory mount points for 2 of the 4 bolts. It also does not require a stability strap for non-trailer loads. Install was easy with just one person and a floor jack to hold the hitch. I did end up having to drop the exhaust but it took minutes with white lithium grease and a long screw driver to remove the exhaust hangers. With 2 people it may be possible to install around the exhaust but I was not successful. I also took other reviewers' advice and pushed it as far towards the front of the car as possible before tightening the hardware. So far I have not heard any rattling. Works great to hold a bike rack and cargo carrier securely.



by:

Fit like butter. Looks stealth (I removed all labels).

Watch the official install video. Do exactly what he does. I used an old laptop bag strap and a floor jack to control the exhaust. I would recommend ramps over jack stands for the extra working room.



by:

Great purchase overall. Shipped the morning after order placed and arrived a couple days later in perfect condition. Install went smooth after watching video. Paper instructions are misleading about which frame hole to use for pull-through bolts so I had to move them. Total 2 hrs install time working alone with no lift and not hurrying. You do need to lower exhaust which took some muscle to remove from hangers. Video has good tips on how. Attached pic shows a little rust but that's fom my bike rack - the hitch finish was perfect.



by:
Mazda

So etrailer.com asked me to review this after owning it for about year.
To start off, the installation was overall fairly easy. I did end up having to remove the rubber hangers for the muffler in order to install it. (For reference I have a 2015 Mazda 3 hatchback)
Longest trip that we have used this on was about a 300 mile round trip with 2 bikes. It performed amazing! No issues at all.
I would suggest getting a hitch cover just to keep the dirt and stuff from hanging out inside the receiver.


25
132
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch



  • Which Hole Does Hitch Hardware of Draw Tite # 24914 Install into On 2019 Mazda 3 Hatchback
    There are two holes on the side of your frame underneath the tape of your 2019 Mazda 3. You might double check to make sure you checked the correct one as it's pretty easy to mistake the wrong one. I attached a picture that shows which slot to use.
    view full answer...
    Image 1 for
  • Will I Need to Alter the Rear Bumper When Installing Draw-Tite Hitch on a 2015 Mazda 3
    According to the installation instructions for the Draw-Tite Class I hitch, # 24914, you will not have to alter the bumper on your 2015 Mazda 3. The hitch will bolt to already existing holes in your car's frame. No welding or drilling will be required. The instructions do say that you will have to temporarily lower the exhaust during installation. The installation instruction are linked toward the bottom of this page for you to review.
    view full answer...
  • Solution for Install Bolts that Seem too Big to Install Draw Tite Hitch 24914
    The problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are too small. I checked your order notes and you're up north where the winters are pretty harsh too so that makes this even more likely. What you'll need to do it clean the weld nuts out so that you can thread the included bolts. I have included...
    view full answer...
    Image 1 for
  • Troubleshooting Draw Tite Hitch for a 2015 Mazda 3 That Wont Fit between Tailpipes
    The Draw Tite Hitch part # 24914 is designed to fit inside the two tail pipes like what you see in the picture I attached. What most likely happened is your hitch got slightly bent in shipping and that is what is causing the interference. As long as the hitch isn't creased, paint is flaking, or other wise visibly distressed you would want to apply controlled force to the hitch to bend it back in shape. The other possibility is that your vehicle may have been involved in an accident that...
    view full answer...
    Image 1 for
  • Replacement Bolts for Draw-Tite Sportframe Hitch on 2018 Mazda 3
    The bolt you are referring to on the # 24914 Draw-Tite Sportframe Trailer Hitch is the hex bolt. This is a M12-1.25 x 30 mm Class 8.8 hex bolt. I have attached an installation video as well as the installation details which lists all of the parts for your reference.
    view full answer...
  • How Much Ground Clearance Will I Have On The Rear Of My Mazda 3 Hatchback With Draw-Tite Receiver?
    When we installed the Draw-Tite Sportframe Trailer Hitch Receiver # 24914 onto a 2018 Mazda 3 hatchback similar to your Mazda 3 we found that the receiver sat just shy of the rear of the bumper cover. So it will not hang past your bumper where you might hit your leg on it or extend the length of your Mazda. The bottom of the receiver tube and chain mounts are roughly 9-1/2" from the ground. Be aware these measurements can vary due to trim levels, tire size and amount of suspension sag.
    view full answer...
  • Trailer Hitch to Fit a 2019 Mazda 3 Sedan
    Actually, the correct hitch for the sedan model of the 2019 Mazda 3 is part # 24982 instead of part # 24914. It's also a 1-1/4 inch Class I hitch like the first Draw-Tite you mentioned. I've attached a picture that shows it installed for you. As well as a link to the install details
    view full answer...
    Image 1 for
  • Comparing Curt and Draw Tite Hitches for 2018 Mazda 3
    For your 2018 Mazda 3 we have Curt and Draw Tite hitches available. I recommend the Draw Tite hitches over the Curt hitches as they don't require the use of a stabilizer strap when carrying a non-supported load like a bike rack. So if you have a hatchback you'd want the Draw Tite part # 24914 or if you have a sedan you'd want the # 24912 instead.
    view full answer...
  • Draw-Tite Trailer Hitch Receiver to Fit 2016 Mazda 3 Sedan
    Close, however the correct Draw-Tite hitch for a Mazda 3 Sedan is part # 24912. This hitch will work on models with or without LED Lights. The other hitch, part # 24914, fits the hatchback models, and is shaped differently than the sedan model. I've included a few help articles about picking the right hitch and one of the most common uses of a hitch, how to pick a bike rack.
    view full answer...
  • Will the Draw-Tite Sportframe Trailer Hitch Receiver for a 2018 Mazda 3 Hatchback Fit a 2019
    The correct trailer for a 2019 Mazda 3 Hatchback is the Draw-Tite Sportframe Trailer Hitch Receiver part # 24982, not the Draw-Tite Sportframe Trailer Hitch Receiver part # 24914 which is for a 2014 - 2018 Mazda 3 Hatchback. I have attached a photo for you of the new generation receiver which as you can uses different attachment points on the bottom of the frame. The previous generation receiver used attachment points on the bottom of the frame rail and then another on the side of the frame...
    view full answer...
    Image 1 for
  • Can the Draw-Tite Trailer Hitch Receiver 24984 Be Used on 2018 and 2021 Mazda 3 Hatchback
    The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24984 fits the 2019-2022 Mazda 3 Hatchback. Unfortunately, this means that you cannot use it on your 2018 as well. For a similar hitch that will fit the 2018 I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24914. I have attached an installation video for your reference.
    view full answer...
  • Hitch and Bike Rack Recommendation for a 2015 3 Hatchback
    The only hitches available for your 2015 Mazda 3 Hatchback are Class I hitches that have a 1-1/4 inch opening. Hitches with a 2 inch opening are generally reserved for larger capacity vehicles like trucks and SUVs. For a hitch for your vehicle I would recommend the # 24914. There are bike racks that will fit 1-1/4 inch hitches though. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive...
    view full answer...
  • Hitch Recommendation for a 2015 Mazda 3 Hatchback
    For your 2015 Mazda 3 hatchback either the Curt Hitch part # C11377 that you referenced or the Draw Tite hitch part # 24914 would work well for you. I personally like the round tube hitches because I believe they are less visible than the square tube hitches, so I would go with the Curt hitch. You are right, the LED taillight consideration is actually for the trailer wiring and not the hitch. But since we connect the hitch and the trailer wiring fitguides so that on the product page of...
    view full answer...
  • Trailer Hitch Fit for 2017 Mazda 3 with 2.0 liter Engine
    We have hitches that fit your 2017 Mazda 3 with a 2.0 liter like the # 24914 if it's a hatchback or the part # 24912 but the Hidden Hitch you mentioned actually fits older Ford vehicles.
    view full answer...
  • How To Lock the Kuat Transfer 1 Bike Platform Rack
    In order to add locks to the Kuat Transfer 1 Bike Platform Rack part # TS01B the best option is to use the Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack part # ATSCLK11011 as this gives you both a lock for the bike rack and the bike which uses the same key. The Kuat Transfer 1 Bike Platform Rack will work perfectly with the Draw-Tite Sportframe Trailer Hitch Receiver part # 24914 on your Mazda 3 Hatchback.
    view full answer...
  • Trailer Hitch Fit Recommendation for 2017 Mazda 3 Hatchback
    I have a trailer hitch that has been confirmed as a fit for your 2017 Mazda 3, but as of right now (December 2016), the Curt is not a fit. Instead you would wan the Draw Tite hitch part # 24914 which has been confirmed as a fit and would work well.
    view full answer...
  • How To Take A Measurement To See If Hitch Mounted Bike Racks Will Fit 2014 Mazda 3
    We have not had a chance to install the # 24914 trailer hitch on a Mazda 3, but there is a way to determine if you have enough room for the bike carriers. If you look at the attached directions and then look under your Mazda you can measure from the holes on your vehicle frame that are used for the installation rearward to note where the hitch pin hole will be. The Chinook, part # S64683 has 6-inches from the hitch pin hole to the closest part of the carrier when folded up and 12-1/2...
    view full answer...
    Image 1 for
  • Hitch Receiver Options for a 2017 Mazda 3 Hatchback
    There are a pair of hitches which are a confirmed fit for your 2017 Mazda 3 hatchback, but unfortunately none of them are 2" hitches. The hitches which fit your vehicle are the Draw-Tite # 24914 and Curt # C11377, each of which are Class I, 1-1/4" hitches. Of the two, I recommend going with the Draw-Tite # 24914 because it will not require the use of stabilization straps when using accessories such as a bike rack.
    view full answer...
    Image 1 for
  • Compatibility of Swagman XTC-2 Bike Rack with 2016 Mazda 3 Hatchback
    Once you install a trailer hitch like the Draw-Tite Class I # 24914, the Swagman XTC2 # S64670 would indeed be compatible with your 2016 Mazda 3. As you can see by reading the customer reviews, the Swagman XTC-2 is extremely highly rated by our customers.
    view full answer...
  • Recommended Trailer Hitch Receiver For Mazda 3 Hatchback
    We do have trailer hitch receivers compatible with the Mazda 3 hatchback. For 2014-2017, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24914. For 2010-2013, I recommend # 24843. For 2004-2009, I recommend # 24816. If you want wiring or ball mount recommendations, let me know the year of your vehicle for a confirmed fit.
    view full answer...
  • Trailer Hitch Fit for 2014 Mazda 3 Hatchback that Does Not Require Trimming or Drilling
    The Draw Tite hitch part # 24914 that you referenced is a confirmed fit for your 2014 Mazda 3 hatchback. It does not require any drilling or fascia/bumper modification either. The Curt hitch part # C11377 does require some fascia trimming though.
    view full answer...
  • Does Draw Tite Hitch # 24914 Fit 2017 Mazda 3 Hatchback w/ Appearance Package
    The Draw Tite hitch part # 24914 that you referenced is a fit for your 2017 Mazda 3 hatchback with the appearance package. That being said you can replace the shank of your T2 to allow it to be used in a 1-1/4 inch hitch but it depends on which version of the T2 you have. What you need is the replacement shank part # 753-3709 if you have the T2 Classic. This will replace the shank you have and allow the bike rack to fit a 1-1/4 inch hitch.
    view full answer...
    Image 1 for
  • Trailer Hitch for a 2015 Mazda 3 Hatchback
    We have trailer hitches for your 2015 Mazda 3 Hatchback but # C11386 will not fit. For your 2015 Hatchback I recommend Draw-Tite trailer hitch # 24914. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. I have linked the Class I compatible 2-bike racks and cargo carriers for you.
    view full answer...
  • Would the Exhaust of a 2016 Mazda 3 Melt Bike Tires when Using Swagman XC S64650
    The distance from the hitch pin hole of the Swagman bike rack part # S64650 to the nearest wheel hoop is 10-1/2 inches. The shank of this rack also has a rise of 4 inches built into it. The tires of your bikes would be far enough away from the exhaust that you wouldn't have any problems. With this bike rack we have not had any issues with exhaust so I can confidently say you will be fine. If you do not have a hitch already you would want the Draw-Tite part # 24914 which has been confirmed...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.