bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24966
lowest price pledge
Our Price: $180.93
You Save: $101.94
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 21 lbs
In Stock
Draw-Tite Custom Fit Hitch - 24966
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24966 can be ordered online at or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (137)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24966

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Draw-Tite
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Uses existing hardware for installation
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

24966 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe - 1-1/4"

Replaces 24944

Installation Details 24966 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24966

Average Customer Rating:  4.9 out of 5 stars   (137 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


I wanted to carry my bikes on my 2018 Prius Prime instead of always using my truck, but didn't want to hang anything on the body work like on my Prius Gen2 2008.
UPS delivered the parts when I wasn't home, but by the pictures you can see I would've had concerns. I think this is powder coat by the way it chipped, but it could be baked enamel, either way there is a lot of paint chipped off. (etrailer agreed to give me a credit for the damage) I wanted to start using this ASAP, so I installed the hitch. Your install video makes it look much easier than it is. Most people don't have a lift, a lot won't have a second pair of hands. My car is a 2018 Prius Prime bought in December of 2017. The winters in New England are hard with road salt and sand filling in places you wouldn't believe. All the clips needed to be opened and shut several times to get them to fully open. On your back it's a messy job getting the covers off. I knew this would be the case going in, but it was still harder then I expected. The directions say 45 minute install... maybe with 3 people on a new car after doing it half a dozen times. I'm a mechanic by trade and this wasn't easy because of the plastic on the car. The bumper cover was a nightmare as I have big hands and this car has a steel bumper reinforcement bar with sharp edges unlike the aluminum bar in the videos. None of which is your fault.
It took me about 4 hours by myself with a couple of breaks to clean out my eyes even with safety glasses on. When done, it looked good and clean minus the paint issues. Then I tried to insert the bike carrier base into the hitch and it wouldn't even start into the receiver tube. So I took a file and started cleaning out the receiver and around the edge of the carrier base. I got it in about 2 ½ inches (see attached pictures). The picture is a bit deceiving as there is a lot more room between the gusset and the bumper cover then it looks. The bike carried should fit ok if I can get it in far enough to insert the bolt into the receiver.
At that time I gave in as it was about 8:30 PM and I had had enough.
The next morning, after some filing in the receiver and a lot of filing on the carrier base, the carrier goes into the receiver fine. The pipe on the carrier is concave by quite a bit, I just got down to the metal on the edges of the pipe and an inch cross the middles weren’t even touched by the 1 ¼ inch wide flat file… It’s still a snug fit, but that’s ok. Some “dry slide” should keep it from rusting too much.

Overall, I think it's a good product. shipping prep is lacking, installation problems weren't etrailer's fault, beware if you have an early built Prius Prime or Prius with the steel bumper reinforcement assembly as you might cut you hands on the uncleaned welds.
I would have rather had gotten a 2" receiver if one was available for a similar price, but this will work for carrying a couple/3 bikes...

I have now used the hitch/bike carrier (Malone Runway 3 Bike carrier) for several weeks and would recommend them.

2017 Toyota Prius

The hitch came quickly via UPS and the same day it arrived I had time to install it. The instructions alloted 45 minutes for the install. Working by myself I accomplished the install in about two hours. I do work slow but it was relatively easy. I used a floor jack to hold one side up while I bolted the other. I also used a clamp to clamp the hitch to the bumper during the process. It looks clean and out of the way. I can't wait to use it. I did put a wiring harness on after I installed the hitch. Everything plugged in very nicely. The wire run up to the battery was the hard part. I will be excited to use this for a luggage rack or to pull a small trailer. I have two Kayaks waiting for a date with my wife at the lake!

No problems with the hitch but backing up is a problem when hauling or towing with my 2017 prius. I cannot turn off the rearview camera and it automatically brakes becuase it thinks I am hitting simething while backing. Just a little annoying nothing major. going forward is great and milage is not effected much.
Andrew - 06/20/2022

2018 Toyota Prius

I have installed the hitch on our 2018 Prius. The video was a big help. It took me about 5 hours to install partially because I was on my back. A lift would have sped things up dramatically.

A lot of time was spent trying to figure how to remove the wiring harness clips from the lower bumper fascia panel. I am not a neophyte. I have lots of tools. I have at least 10 pairs of needle nose pliers both straight and angled in various sizes. After more than an hour trying various approaches, I finally realized I could unclip them with my fingers. If l could see them, it would be easy but they are in a spot where you cant "see". It would be a big help if you spent some more time in your video on how to deal with the wiring harness. I was installing on a Prius 3 which has the proximity sensors mounted in the bumper.

I have included pics of the troublesome wiring harness clip and the final installation.
-- comment by: John R - 07/12/2018

2017 Toyota Prius

This was the second etrailer hitch I bought. I bought one for my 2012 Prius, and then when I got a 2017 Prius Prime, I bought one for that car. The hitches are easy to install and work great.


All in all, the hitch has been great. It has allowed us to attach a much better bike rack than would be possible without a hitch, and it's not obtrusive when we remove the rack.

Note that it is possible to install the hitch without a lift or ramps, but I struggled immensely with clearance while doing so.

The most annoying part of the installation process was removing the plastic fasteners holding the trim panels on. I'd check out Amazon or a local auto parts store for replacements in case you break any irreparably (many of mine were damaged during removal by flathead screwdriver, and a few were beyond use). They're cheap enough that I wish I would've purchased them and had them on hand instead of having to run out to the store after starting the (re)assembly process.

Despite the couple things above, the installation process wasn't too challenging. The installation instructions were clear and the video was very helpful. I've recommended etrailer and this specific hitch to friends, and I'd definitely buy it again!

2019 Toyota Prius

We purchased this hitch for a 2019 Prius, specifically to mount a bike rack. Since the top of the hatch is window, you can't hang a trunk rack.

We chose to have this professionally installed. Previous experience reinstalling the plastic clips underneath was challenging so we left it to an expert. We are not auto DIYers.

The hitch is perfect, barely visible, especially next to the black bumper. Our old Yakima Hold Up bike rack fit the hitch and car perfectly. The system feels solid.

I can't advise about time for installation other than the car was ready for pick up 1.75 hours after dropping it off.

Thanks etrailer for making purchasing the right hitch easy. We especially appreciated the 'verified to fit' notes.


Hitch arrived on time and was quite easy to install thanks to the very detailed installation video provided by etrailer. Only took about 1-1/2 hrs. The single email from etrailer had a link for tracking the shipping status as well as a link to the installation video so that made everything that much easier.


A year later, still looking good and working very well. It's very discreet and it mounts high enough that it's not anywhere near the lowest point under my 2016 Prius. So it never hits the ground!

See photos below, it only sticks out maybe a half inch beyond the bumper so it's also never in the way.

I had to install it by myself, it's no problem to do so. First, just remove 3 of the mounting bolts on each side. Then - one side at a time - remove the 4th bolt and slip the hitch behind the bumper frame just on that side and loosely install the bolt.

2016 Toyota Prius

I am super happy with this product and the whole experience ordering from etrailer. I was amazed that they shipped it so fast for free!

The included instructions and bonus material on safe trailering and how to determine your trailer tongue weight was great. The instructions were easy to following and I was able to install the hitch in pretty short order. Fit and finish are excellent and it's already in use with my new Saris bike rack, hauling my mountain bike. The hitch sticks out plenty far to keep things away from the car without sticking out too far and being obvious or a hazard.

Thanks for a great product, price, shipping and service!


Works well as promised, easy to install bike rack and remove as needed.


I haven't had my new hitch installed yet, but I was very happy with the previous hitch, which had to go with my last car. I have no doubts that the new hitch for the new car will be great, and I love the speed of delivery (it arrived as predicted). This company offers great products!


Hitch works great. Use it for bike rack only and have traveled cross country with no issues. Installation went well. Needed help to hold in place while placing bolts. My wife was able to help. Very satisfied.


You guys have a great super intuitive easy to use web site, and I really like having links to then videos right there on each product detail page. This is the third hitch I have gotten from your company and all 3 installations have gone exactly as shown on your videos. Ditto for the wiring harnesses.


As always, etrailer is a pleasure to deal with. Helpful easy to navigate website, fast delivery, good product. I've put on several hitches and never been disappointed. My wive is excited to put her bike on the back of her car instead of trying to cram it inside.

2021 Toyota Prius

Installs as depicted in you tube video. May need to purchase a few replacement body panel fasteners.


This trailer hitch worked well and was easier to install than the [online] and directions suggested. I had installed one on an older model of the same brand car and disregarded the directions, which was a better way to do it.


This has been a great hitch for my Prius Prime. It is discretely tucked up close to the bumper and only the receiver is seen. I use the hitch mainly for a bike rack and some light utility trailer hauling. Installation is challenging, but possible for DIY with the aid of the well filmed online video. One might consider buying it and having a mechanic install if you are not skilled with tools. I’m happy with my hitch.

2020 Toyota Prius Prime

It took a couple weeks for etrailer to deliver the hitch this time around. Understandable bc of the coronavirus situation. Drawtite hitch is really high quality and solid. I had the drawtite in the previous gen Prius. That one was way easier to install. This one was a lot harder with more clips and bolts to take off and also heavier. But it’s totally worth the effort. I spent about 70 minutes to install the hitch with help from my son to hold the hitch and bumper in place. We also used a jack stand to lift the hitch in the correct spot so the bumper could be placed. Also I didn’t install the rear panel bc I didn’t want to cut it out. I plan to Lee the car only for a year anyhow.


Arrived quickly and fit perfect
took myself about 1 hour and could have gone faster with a helper as YouTube suggested.

Toyota Prius

The kit arrived a day early. Followed the instructions and viewed the video. I used a floor jack and the lack of clearance between car and floor made access to the panels under the 2021 Prius Prime a little challenging, but got them off easily and every part fit perfectly. The video shows the removal of a wire bundle above the bumper across the top of the lower fascia. On the 2021 Prime there is a plastic foam spacer that impedes access to the squeeze latches. I broke the spacer to get it out then glued it back on reinstallation.

Toyota Prius

Nicely engineered. I had it installed on my new Prius, primarily to support a bike rack. I had installation done at the dealership to make sure it was done in the best way, knowing that Toyota does not encourage trailer hitches for the new Prius (a bike rack or trailer drives the Prius rear sensors crazy -- but there are work arounds). I have also used the hitch to pull a trailer mounted with a powered log splitter. Backing up with the trailer or bike rack is a little tricky without disengaging the rear sensors. They cause the brakes to automatically engage. Good product. I would recommend it.

Fine. It remains solid and continues to look and work fine. Unobtrusive.
Craig B - 06/06/2021

2016 Toyota Prius

Great fitting hitch, great looking hitch (meaning you barely notice it and what you do see isn't ugly). The instruction video was excellent and is about accurate in it's difficulty rating. The hard part is lifting the bumper and hitch assembly up together and getting the first couple bolts in to hold it up.


I installed it in about 4 hours. Did not elevate the car. The video from etrailer was excellent. I used some blocking in the center in place of the "extra hands" and that worked fine. It has to be able to hold the hitch and the bumper beam. The disassembly and the bolt up was the hard part. Putting it all back together was a breeze.


Wasn't too bad to install. Looks ok. After a year and a few uses I just see a little rust

Hi Sam, Thanks for your feedback! The powder coating on the hitch can break down overtime with rock chips and salt on the road. You can remove the rust and prevent future rust by using a rust resistant paint. I have attached a helpful article that goes into better detail.
-- Etrailer Expert Tyler M - 07/18/2021


It arrived on time was a perfect fit for my Prius!

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Recommendation For A Receiver Hitch to Carry A Thule Bike Rack On 2017 Toyota Prius Prime
    Yes, we have the Draw-Tite Class I Sport Frame Receiver Hitch, Item # 24966. This hitch has a 1-1/4 inch opening and will work well with your Thule Roadway 2 Bike Rack, Item # TH912XTR, that your referenced. It has a maximum weight capacity of 2,000-lbs and a maximum tongue capacity of 200-lbs. A ball mount and wiring is not needed unless you decide to tow a trailer. I have attached a video with it being installed on a 2017 Toyota Prius Prime similar to your vehicle.
    view full answer...
  • Trailer Hitch Recommendation for 2017 Toyota Prius II
    I have a solution for you, but a hitch from a 2013 Prius III would not fit a 2017 Prius II. The hitch you would need is the Draw Tite part # 24966 which I confirmed with Draw Tite as a fit for all models of the 2017 Prius.
    view full answer...
  • Will a Trailer Hitch from a 2011 Toyota Prius Fit a 2017 Toyota Prius
    The 2011 and 2017 Toyota Prius do not use the same trailer hitches so the one on your 2011 will not fit the 2017. But we do have hitch options for the 2017. I recommend Draw-Tite hitch # 24966. I have linked a video showing and example installation on a 2017 Prius and the installation will be basically identical on your 2017.
    view full answer...
  • Comparing Draw Tite Hitches for 2017 Toyota Prius
    For all intents and purposes the Draw Tite hitches part # 24944 and # 24966 are the same thing for your 2017 Toyota Prius. They will install the same and function the same. Your best option though is the part # 24966 which is a bit less expensive and just as good as the other.
    view full answer...
  • Trailer Hitch Recommendation for 2017 Toyota Prius Prime for Carrying Bike Rack
    The Draw Tite hitch part # 24966 is a fit for the 2017 Toyota Prius Prime and would be a great hitch for carrying a bike rack as long as it's a Class I hitch compatible bike rack.
    view full answer...
  • Does Draw-Tite Class I Hitch 24966 Fit 2017 Toyota Prius
    The Draw-Tite Class I hitch # 24966 is a confirmed fit on your 2017 Toyota Prius and it is compatible with the hitch-mount carrier you referenced. I checked specs for the carrier and it fits both 1-1/4-inch hitches like the Draw-Tite and 2-inch hitches too. This rack uses an unusual security system that requires a special tool and custom locks are offered by the manufacturer. We do not offer that special tool or lock but the rack will fit the hitch you referenced. I linked our page showing...
    view full answer...
  • Recommended Trailer Hitch for 2018 Toyota Prius
    We do indeed have a couple trailer hitches available for your 2018 Toyota Prius. I recommend the Draw-Tite Class I Sport Frame Receiver Hitch # 24966. This Class I hitch is confirmed to fit your Prius and it will use existing holes in its frame for a no-drill installation. Just note that some underbody panels/fascia will need to be temporarily removed and trimming of the underbody panel is required. I have attached an installation video on the 2018 Toyota Prius that you can use for reference....
    view full answer...
  • Does Draw Tite 24944 and 24966 Fit 2018 Toyota Prius
    The Draw Tite hitch part # 24966 replaced the 24944 that was a fit for the Toyota Prius models like your 2018 Toyota Prius. The # 24966 is a confirmed fit for your 2018 Toyota Prius. I attached an install video for this hitch on a 2018 Toyota Prius as well.
    view full answer...
  • Will Draw-Tite Sportframe Trailer Hitch Receiver Fit a 2019 Toyota Prius AWD
    Yes, according to Draw-Tite the Sportframe Trailer Hitch Receiver # 24966 will fit all models of the 2019 Toyota Prius. If you are skeptical then I recommend checking out the attached installation video of this trailer hitch on a 2018 Prius as well as the installation instructions which are linked for you. Attached are some photos of this installed on the 2018 Prius as well.
    view full answer...
    Image 1 for
  • Does Draw Tite Hitch 24966 Fit 2018 Toyota Prius Prime
    The Draw Tite hitch part # 24966 that you referenced was carried over as a fit for your 2018 Toyota Prius Prime and would work well. It's currently a fit for the 2019 models as well. I attached a link to an install video for this hitch on a similar 2018 Prius for you to check out as well.
    view full answer...
    Image 1 for
  • Local Hitch Installer for Draw-Tite Class I Hitch 24966 on 2019 Prius AWD
    The Draw-Tite hitch # 24966 is a confirmed fit on all versions of the 2019 Toyota Prius. Since this hitch installs at the rear bumper mounts, rather than on the exposed parts of the frame as with most hitches, its installation is a bit more complex than most others and so my recommendation is to use a local installer recommended by Draw-Tite. They will be apt to be more familiar with the hitch. I sent you a link to Draw-Tite's website where you can enter your zip code to find their nearest...
    view full answer...
  • Distance from Hitch Pin Hole to Receiver Opening on Draw-Tite Hitch for Toyota Prius
    Yes. I went out to our warehouse and measured the distance from the center of the hitch pin hole to the receiver tube opening on part # 24966 and it's about 2-1/4 inches.
    view full answer...
    Image 1 for
  • Dimensions Of Draw-Tite Trailer Hitch Receiver 24966 For 2021 Toyota Prius Prime
    I had our warehouse measure the Draw-Tite Trailer Hitch Receiver # 24966 you were looking at and from the center of the lower mounting holes to the top of the receiver measures 3", and from the back of the mounting flanges to the front of the receiver measures 9-7/8" as shown in the included diagrams. This will fit pretty much the same as the hitch shown in your picture. I included a picture of the # 24966 installed on a similar 2017 Toyota Prius Prime, and a video of it being installed...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Will Draw-Tite Trailer Hitch Fit AWD 2019 Toyota Prius
    The Draw-Tite Trailer Hitch Receiver # 24966 will absolutely fit your AWD model of 2019 Toyota Prius. There will not be any interference with the rear components of your Prius. I checked with Draw-Tite to confirm that this does fit your AWD Prius. I have added a link to a video showing this hitch being installed on a Prius for you to take a look at.
    view full answer...
  • Recommended Draw-Tite Trailer Hitch Receiver for 2020 Toyota Prius Prime
    For your 2020 Prius Prime, there is only one Draw-Tite option and it is the Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24966. The 3 options you referenced were for the standard Prius not the Prius Prime.
    view full answer...
  • What Hitch do you Recommend for Hauling Two Bikes with my 2017 Toyota Prius
    The Draw-Tite Sportframe Trailer Hitch Receiver part # 24966 is a fine choice as a bike rack hitch. Like any other hitch for your Prius it has a 200 lb. maximum tongue weight so be sure not to exceed that with the rack and the bikes you are hauling. I've linked the install video for you to check out.
    view full answer...
  • Is the Trailer Hitch for a 2018 Toyota Prius Easy to Install
    The correct trailer hitch you will want to use on your 2018 Toyota Prius is the Draw-Tite Sportframe Trailer Hitch Receiver part # 24966. This trailer hitch is a custom fit for your Prius and uses pre drilled holes in the frame. The installation process is rated at a level 10 taking on average around two hours. The process is not difficult by any means, it is just time consuming as you have to remove the rear lower bumper fascia. If you are handy and have some free time then I see no reason...
    view full answer...
  • Install Video Guide for Draw Tite Hitch that Fits 2021 Toyota Prius Prime
    I attached an install video for the Draw Tite hitch part # 24966 on a similar Toyota Prius Prime to your 2021 model for you to check out. The process would be the exact same.
    view full answer...
  • Is Drawbar Required for Draw-Tite Sportframe Trailer Hitch on 2017 Toyota Prius
    The Draw-Tite Class I Sport Frame Receiver Hitch # 24966 referenced in your question is confirmed to fit your 2017 Toyota Prius. A drawbar like the Draw-Tite # 3593, which is also referred to as a ball mount, is used for holding a hitch ball that is needed for towing. This is not a required component for the trailer hitch, and it can be obtained separately if one is needed. If you intend to use the Draw-Tite Trailer Hitch for non-trailer loads such as bike racks and cargo carriers, a...
    view full answer...
  • Trailer Hitch Recommendation for 2018 Prius Prime for Carrying Cargo Carrier
    There are some hitch brands that make 2 inch hitches for lighter duty vehicles like your 2018 Toyota Prius Prime but in general the smaller hitch size of 1-1/4 inch is what's used on lighter duty vehicles likes yours. For that I'd recommend the Draw Tite part # 24966 since you plan on carrying a cargo carrier. Unlike the Curt this does not require a stabilizer strap when carrying a non-supported load. Since hitch adapters cut the tongue weight capacity of the hitch by 50 percent I'd strongly...
    view full answer...
  • Hitch Cargo Carrier Recommendation for 2020 Toyota Prius Prime the Draw-Tite 24966 Hitch
    Yes the Reese cargo carrier part # 63155 would be a great choice for a cargo carrier for the Draw Tite hitch part # 24966 that fits your 2020 Toyota Prius. The rise in the shank of this carrier is a really great feature like you mentioned since your vehicle doesn't have great ground clearance.
    view full answer...
  • What Hitch Fits 2019 Toyota Prius
    The Draw-Tite Sportframe Trailer Hitch Receiver # 24966 is a fit for your 2019 Toyota Prius. The Draw-Tite Hitch # 24967 is for an older generation Prius. I attached a video on the installation for the hitch that fits your Prius. It is on a 2018 but it should be very similar since it is the same generation vehicle.
    view full answer...
  • Trailer Hitch Receiver Options for a 2018 Toyota Prius Prime
    I do have a trailer hitch receiver that is a confirmed fit for your 2018 Toyota Prius Prime but Draw-Tite has yet to as of (April 2018) carry over the Draw-Tite Sportframe Trailer Hitch Receiver part # 24966 for the 2018 model year. Curt on the other hand has carried over the Curt Trailer Hitch Receiver part # C11473 as being a confirmed fit for your 2018 Prime. Although it is likely that the Draw-Tite hitch will fit the 2018 model year, this has not yet to be confirmed by the manufacturer....
    view full answer...
  • Trailer Hitch Receiver Confirmed to Fit a 2018 Toyota Prius Prime
    I contacted Draw-Tite about the trailer hitch receiver # 24966. They haven't had the chance to test it on a 2018 Toyota Prius Prime yet but they believe it'll carry over. This is only the second year of the current generation of the Prius Prime so it's unlikely Toyota has made enough changes to make the hitch not fit. Also, the Curt hitch for the 2017, part # C11473, is confirmed by Curt to fit the 2018 and it installs in the same fashion as the Draw-Tite. So unfortunately I can't confirm...
    view full answer...

< Previous
123. . .5

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Alexander C
Written by:
Alexander C
Employee Brent H
Test Fit:
Brent H
Employee Ryan G
Test Fit:
Ryan G

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-833-496-1390