bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # 36334
lowest price pledge
Retail:$375.57
Our Price: $193.11
You Save: $182.46
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 21 lbs
Quantity: 
Draw-Tite Visible Cross Tube Trailer Hitch - 36334
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36334 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (114)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 36334

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 300 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36334 Draw-Tite Class 2 Trailer Hitch Receiver

90138 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36334 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36334

Average Customer Rating:  4.8 out of 5 stars   (114 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Overall great experience here on etrailer.com! Package came quick but showed up with some damage to the box and a few scraps on the hitch, nothing that will effect it’s performance! Install was about 1.5hrs alone used a jack to lower and raise the exhaust. Would recommend this web store for all your trailer needs and wants!




by:

Exactly what I needed, install was relatively easy. Lift is preferable but can do it on the group. Their instal video is good but didn’t say you have to remove your factory mud flaps to access the bolt holes in the frame. It’s still holding strong a year later.




by:
2008 Subaru Outback Wagon

Easy ordering. Arrived in timeframe expected. Packaged nicely in secure box. It arrived damage free and was what I ordered. Installation went just fine. No problems or concerns whatsoever so I’m a happy customer




by:
2005 Subaru Outback Wagon

Item arrived bent and as a result could not fit. I am waiting for a return label to send it back. My refund will take over 2 weeks, and then I can reorder? Couldn't wait so ordered a hitch from someone else. very dissatisfied that exchanging this defective hitch takes week. I sent excellent photos showing the problem, wish another could have been sent immediately.




by:
2009 Subaru Outback Wagon

I did install this hitch on my 2009 Outback, successfully.
Lying on the ground on my back, without an extra set of hands; which would have been useful because of the weight of it. But it is doable by yourself.
It took a little over an hour.
The installation video on YouTube and the wiring harness video were tremendous resources. Not sure I would have done the hitch without watching that video several times.
I would recommend this product and eTrailer.




by:

Rated assuming the fitment is right, as I haven't installed it yet.




by:
2005 Subaru Outback Wagon

Repeat customer
NAPA could not get a
hitch to match
Dealer wanted over $130 dollars more.

Hitch arrived in time for my vacation, install was simple with the right tools, wiring harness was plug and play, it took me longer to access the panel than the wiring install. My only complaint is that my car has little torque when towing through the mountains of the northeast.


Comments
going great just returned from vacation towing boats, I will return when I need another hitch
Will G - 08/24/2015


by:
Subaru Outback Wagon

I ordered the trailer hitch for my dual exhaust subaru outback wagon and was assured by the sales girl this would be the correct one after having searched for the correct one on line for days. Well, not only was it the correct hitch for my car, it also arrived 3 days earlier than I was told and was easy to install. I would definitely do business with this company again as I was completely satisfied with the service and quality of the product I purchased.


Comments
Still doing what its suppose to.....no complaints here !!!!! Id do it again !!!
Mel G - 07/23/2018


by:

Quick delivery on the date anticipated!

This
is the second hitch I've ordered from etrailer and so far so good! The video tutorials are super helpful (you can find them on youtube). I've been able to install the hitches at home and without too much trouble.

I'd recommend etrailer to anyone looking to buy a hitch.


Comments
I use the hitch with my bike rack a couple times a week. It is still working well! I recommend etrailer to anyone I know looking to buy a hitch.
Max - 07/23/2018


by:

Easy install




by:
2006 Subaru Outback Wagon

The hitch was well made and the paint was excellent.
I liked the links to instructions. I found it easier to remove one muffler than drop the whole exhaust. I did not find good instructions for connecting the wiring but it was a simple easy job. I would like to see suggested kits that include all components to do the job. I calculate it saved me about $100 by doing the job myself. I suggest recommending either antisieze or loctite for the fasteners as both prevent corrosion.


Comments
Hello George: I have been away. I have used the hitch very little but it works fine. I would advise making a change to the installation instructions. I would advise removing one muffler rather than lowering the exhaust pipe. I found it was easier and faster than the suggested way.
Bob L - 09/05/2018


by:
2007 Subaru Outback Wagon

Installation pics




by:
2009 Subaru Outback Wagon

As with most trailer hitch installations that I've done, this one also went on without a hitch (sorry, couldn't resist). So nice when everything lines up well. I received the hitch promptly and well packaged. It worked better for me to remove one of the mufflers since the vehicle is still new and the bolts aren't rusted yet. The wiring harness installation was also excellent, since the Outback was prewired and all I had to do was connect to an existing connector on the vehicle. The Utube videos helped with removing the interior panels and finding the connector. Great products and great company to work with!




by:
2008 Subaru Outback Wagon

This is a good, sturdy hitch. Package arrived very quickly, in good shape. Instructions were pretty clear (I don't always read the instructions, but I had never installed a hitch before). I expected this job to take about an hour, but ran into some trouble with my mufflers (not the fault of the hitch), so it took two hours. I also did this while lying under the Subaru, probably not an optimal way to work. All is very good and solid, now.

I appreciated several of the suggestions from the instructions, particularly the one to bolt the hitch to the tow loop, first. This took up the weight of the hitch, and made it easier for me to lift the ends into place (also, shove a toolbox or something under the hitch once it is close to being in place). The hitch was built to fit, and I had no problems with hole alignment. There is also very little room to spare between the muffler and the trunk/spare tire well, so it's good that the fit was as precise as it was.

Overall, a very good product for my Subaru. I'm ordering a Thule bike carrier from etrailer now, to go with the hitch.




by:
2006 Subaru Legacy

i own a farm and i have ordered numerous oddball hitch and trailer parts,you guys manage to get it to my doorstep before either local parts distributors can get it ordered and in stock for me.




by:
2007 Subaru Outback Wagon

We were able to install this hitch on our 2007 Subaru Outback in about 1.5 hours (part of that time spent going to the hardware store to get a torque wrench and sockets) with no prior experience and no car lift - just did the installation with the car in the garage. While it does take some maneuvering, the installation is fairly straightforward and the video is clear and helpful. Everything fit well and the hitch is very securely attached. It fits our Swagman bike rack well.




by:

The hitch itself seems very high quality, but regardless of what size I use, it's a very tight squeeze. I'm using smaller configuration for a bike rack; I got part of the rack in the hitch, but to get it in all the way, it needed some persuasion from a rubber mallet. And now the bike rack is permanently affixed to the car. That sucker ain't comin' out.

I'll let you decide if that's my own idiocy to blame or not. lol




by:
2005 Subaru Outback Wagon

Like a previous reviewer, my ball mount was missing when shipment was received. The issue was resolved. The receiver was scraped up and re-touched by the shipper before sent to me. Apparently they receive hitches on pallets and the mfg. doesn't pack in a manner that will prevent scarring. Smashed my finger pretty well following the instructions. Would remove the exhaust hanger located midway down the Outback wagon, in addition to the muffler mounts, if I had to do again. FYI - on my 2005, I used one spacer under each mounting point. The instructions aren't specific for the four options for mounting the hitch. Better instructions would help.




by:
2009 Subaru Outback Wagon

This is an excellent product. I have installed the the trailer wiring harness, the instructions were clear and concise and the installation took about 10 minutes.

I hope to install the hitch tomorrow. I reviewed the instructions for that installation and looked under my Subaru. The hitch installation should take an hour or so and I'm slow.

Again, excellent product and clear instructions. If you need a hitch for your Subaru, this is the way to go.




by:
2008 Subaru Outback Wagon

Hitch shipped very quickly. Welds and paint job look good. Included instructions weren't very helpful but the install video on the webpage was all that was necessary. Installed on an '08 Outback wagon. Had it bolted p in less than an hour. No jacking required. I wish it fit higher and closer to the bumper but the center tow hook mount point would have to be re-engineered. It's okay as is. I did discover that I will need a 9" long ball mount as the 7" I bought doesn't stick out far enough.




by:

I purchased several hitches from etrailer over the years. I want a hitch for all my cars because of the bike rack. Hitch mount bike rack is the best vs. trunk/roof mount.




by:
2005 Subaru Outback Wagon

This was for a 2005 Subaru Outback. The hitch was delivered quickly, arrived with all the accessories and instructions I ordered, and went in just as shown on the instructions and the video. It took me about 2 hours to install it, because I made sure everything was covered with grease when I put it together - to help protect against the road salt. The electrical went well also, I was able to find a video that showed me where the hitch plug was in the back (just under the left tail light on the inside.
I also used an etrailer hitch for my 2005 Camry. I put it on a few years ago. That one goes around the muffler and it scrapes sometimes when I pull out of a driveway on a slope.
Otherwise, no complaints.




by:
2007 Subaru Outback Wagon

I just finished installing the Hidden Hitch item #90138 on my 2007 Subaru Outback (Wagon). The instructions were clear and accurate. I had a little difficulty removing the four muffler hangers (hanger brackets were rusty as the car came from Wisconsin) and still had a little difficulty getting the hitch past the mufflers and into place. Having an assistant would be a big help. After removing two caps and two factory bolts, the holes in the hitch lined up perfectly. I used all four small spacers on my car, one at each bolt location. I did spend a couple hours installing the hitch, but would be much faster with a helper and easier remover of the muffler hangers. I had very quick delivery from Missouri to Washington state. (They upgraded my delivery choice for free)




by:

Took about an hour to install with one other person helping out. The video was super straight forward and super helpful. The box arrived on time and intact! Great service and great product! I use it almost every day for my bike rack




by:
2007 Subaru Outback Wagon

2007 Subaru Outback Wagon
I watched
the installation video about a dozen times - definitely helpful! The installation itself took me about two hours. Everything went as planned, but another person to help would have cut the installation time considerably. It is a challenge for one person to hold the hitch in place and start that initial washer and nut. I was also flat on my back - no luxuries like a lift for additional ground clearance. I struggled at first with the exhaust hangers, before learning to make sure they were well lubricated, sliding easily along their metal hangers. For me it was easier to completely remove the rubber part of each hanger from the vehicle completely and then to reinstall. I also used the vehicle jack to lift the exhaust system to the proper height. Shipping was fast, and etrailer did a great job of keeping me informed. The hitch itself extended back far enough, so that I didn't need an extension to hold my Allen 522R bike rack.



25
115
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch



  • Will Draw-Tite Trailer Hitch # 36334 Fit a 2007 Subaru Legacy Outback Sedan
    Draw-Tite trailer hitch # 36334 is indeed a fit for your 2007 Subaru Legacy Outback sedan excluding Sport models. I think the problem that you had was the naming conventions of Subaru combined with Uhaul most likely focusing on the Outback part of the vehicle name. But hitch # 36334 does for sure fit the 2007 Legacy Outback sedan. I have linked the installation instructions and a video showing an example installation for you. Hitch 36330, which is discontinued, fits the Outback Wagon....
    view full answer...
  • Replacement Hardware for Draw-Tite Trailer Hitch Receiver # 36334
    Yes, we do have Replacement Hardware Kits, # RHK, available for the Draw-Tite Trailer Hitch Receiver, # 36334. You will just need to visit the product page for # RHK and provide the hitch item number and manufacturer name to place your order.
    view full answer...
  • Replacement Installation Hardware for Draw-Tite Trailer Hitch 36334 for a 2008 Subaru Legacy
    The hardware needed to install trailer hitch # 36334 is listed in the instructions I have linked for you but to ensure you get the proper grade hardware I recommend ordering replacement hardware kit # RHK. Just enter the hitch number and manufacturer where indicated on the product page to get the right kit.
    view full answer...
  • Hitch Recommendation for a 2007 Subaru Outback Wagon V6 LL Bean
    The Draw-Tite Trailer Hitch # 75560 would be a great choice for your LL Bean version of your 2007 Subaru Outback Wagon with a V6. We had a customer come back and say this hitch fit his V6 model and that the exhaust of his vehicle didn't interfere with the install. I attached an install video for you to check out as well.
    view full answer...
  • Trouble Lining Up Bolt Holes to Install Draw-Tite Hitch on 2006 Subaru Legacy
    Sounds like you either have the Draw-Tite Class II # 36334 or Class III # 75560 hitch receiver for your 2006 Subaru Legacy. While this is a custom fit hitch that should bolt right up no problem, the mounting brackets may have become bent during shipping which is why you're having issues getting the bolt holes to line up (if you're talking about something else please let me know). This is common enough that we actually have a helpful article on how to handle this type of situation which...
    view full answer...
  • Which Trailer Hitch Offers Most Ground Clearance for 2009 Subaru Outback
    It sounds like you're looking for the trailer hitch with the most ground clearance for a 2009 Subaru Outback and if that's the case you'd be looking at the Curt Trailer Hitch Receiver part # C12284 or Draw-Tite Trailer Hitch Receiver part # 36334. These hitches both have the smaller 1-1/4" opening so they won't hang down below the bumper near as much when compared to the larger 2" opening options. The Curt and Draw-Tite are both pretty similar options so I recommend whichever is more cost...
    view full answer...
  • 2009 Subaru Outback Hitch Recommendation for a Yakima Ridgeback 4 Bike Rack
    I would go with the Draw-Tite part # 75560. This is a Class III hitch with a 2 inch opening that would work great with your Yakima Ridgeback 4 bike rack part # Y02458. I attached an install video. Anytime there is a 2 inch hitch option available for a vehicle we recommend that over a 1-1/4 inch hitch as the 2 inch hitch will have higher capacities and offer more flexibility for future hitch accessories as more things are made for 2 inch hitches. With that being said, if the only thing...
    view full answer...
  • How Hard is it to Install a Class II Trailer Hitch on a 2008 Subaru Outback Wagon
    We have a video showing installation of Draw-Tite Class II trailer hitch # 36334 being installed on a 2008 Subaru Outback Wagon that will be the same as your 2006. I have also linked the installation instructions for you. Installation is straight forward. I have included some links to the right that will help. If you plan on doing any towing the proper ball mount is # 36053. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. The top of the trailer coupler should say...
    view full answer...
  • Recommended Trailer Hitch Receiver for Bike Rack on 2008 Subaru Outback
    You are correct that Curt requires the stabilization strap # 18050 on many of their hitches when using a bike rack or other accessory. This does interfere with the spoiler on your 2008 Outback if you run it to the top of the hatch, so I recommend the Draw-Tite Class III # 75560 which not only is a stronger hitch that will also allow for more accessory options, but also does not require that strap. I've attached an installation video of this hitch on a 2008 Subaru Outback to assist....
    view full answer...
  • Trailer Hitch and Wiring for a 2005 Subaru Legacy Wagon, Outback Model
    After doing a little searching I was able to determine that Curt trailer hitch # C12284 will fit a 2005 Subaru Legacy Wagon, Including Outback Wagons. None of the other hitches are confirmed to fit. The correct ball mount to use is # C45519. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For a trailer wiring harness use # 118461.
    view full answer...
  • Will Draw-Tite Class II 1-1/4 Inch Hitch # 36334 Fit a 2009 Subaru Legacy 2.5 Limited
    The Draw-Tite Class II 1-1/4 Inch Hitch, part # 36334, will fit your 2009 Subaru Legacy 2.5 Limited. I am including a link to the installation instructions on the hitch. If you are going to do some towing, the recommended ball mount is Draw-Tite Ball Mount, part # 36071. For a hitch ball you can use Tow Ready 1-7/8 Inch Hitch Ball, part # 19256, or Tow Ready 2 Inch Hitch Ball, part # 19258. For trailer wiring, use Wiring Harness, part # 119147KIT. I have included a link to the installation...
    view full answer...
  • Trailer Hitch and Bike Carrier for a 2006 Subaru Legacy Sedan with Rear Spoiler
    Like you said the spoiler on your 2006 Subaru Legacy sedan prohibits the use of a trunk mount bike carrier. What I recommend is to install a trailer hitch and use a hitch mounted carrier. You can use Draw-Tite hitch # 36334. It is designed to fit the sedan and wagon models of the Legacy. It also fits certain Outback models as shown in the video I have linked. Then for an inexpensive bike carrier you could use the Curt # C18085. I have linked video reviews of this carrier for you.
    view full answer...
    Image 1 for
  • Choosing Class II or III Hitch for 2006 Subaru Legacy Sedan
    Draw-Tite is connected with Hidden Hitch and has some identical trailer hitch options to the ones you referenced. The Draw-Tite Class III hitch, part # 75560, and the Class II hitch # 36334. Due to the much better selection of hitch mounted accessories like bike racks and cargo carriers, we customarily recommend folks go with the 2 inch receiver of the Class III hitch in this case. If you'll be using the hitch for towing purposes, you'll need to install a trailer wiring harness like part...
    view full answer...
  • 2006 Subaru Outback Wagon Class II or III Trailer Hitch to Carry Thule Hitching Post Pro Bike Rack
    There are Class II and III trailer hitches available for the 2006 Subaru Outback Wagon. Either Class can handle a 4-Bike rack but I recommend going with a Class III like # 75560 because the 2 inch receiver will afford you more options for accessories. With this hitch installed you can use the Thule Hitching Post Pro # TH934XTR bike rack. For a Class II hitch go with # 36334. Installation of either hitch is not very complicated and you could do it at home to save money. Otherwise any trusted...
    view full answer...
  • Trailer hitch, Ball Mount, Ball, and Wiring for a 2006 Subaru Legacy Sedan
    First, lets look at the trailer hitches for your 2006 Subaru Legacy sedan. There are both Class II and Class III trailer hitches available. Any time there are different Class hitches available for a vehicle I always recommend going with the higher Class. This is because the higher Class hitches have a higher capacity and have more accessory options. With a Class II hitch you are going to also be limited to using one specific ball mount so that makes it harder to choose the proper ball...
    view full answer...
  • Selecting Hitch for 2007 Subaru Outback Wagon with Dual Exhaust for Use with Hitch Bike Rack
    For your 2007 Subaru Outback Wagon with dual exhaust we offer two sizes/classes of trailer hitch, all of which are displayed on the linked page. We always recommend the higher-capacity 2-inch Class III type whenever there is a choice since it will offer a higher tongue weight (TW) rating, which is really what matters when using a hitch-mounted accessory such as a hitch bike rack like the Thule Hitching Post Pro # TH934XTR or hitch cargo carrier like # 63153. The 2-inch Class III hitch...
    view full answer...
  • Will the Saris Bones Trunk Mount Bike Rack Fit a 2007 Subaru Legacy with Spoiler
    If your 2007 Subaru Legacy factory spoiler is the low profile design with no gap between it and the trunk then you won't have a problem using a trunk mount bike rack such as # SA805BL. If it is the taller one found on WRX/STi models then there could be fit problems and Saris states that their racks will not fit. If you do have the taller spoiler you could use the SeaSucker Komodo # 298-BK1910-GO or go with a trailer hitch and hitch mounted bike rack. If you want to go with a trailer hitch...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendation for a 2006 Subaru Outback
    I am afraid that there are no trunk mount bike racks that will fit the 2006 Subaru Outback Wagon. A trunk mount bike rack cannot be safely attached to the vehicle. Instead, the best bet would be to install a trailer hitch. Since you will just want to carry the one bike, possibly 2 bikes, I recommend the Draw-Tite Trailer Hitch, # 36334. This is a Class II trailer hitch with a 1-1/4 inch receiver. I have included a link to the installation details for you. For a compatible bike rack, I...
    view full answer...
  • Bike Carrying Options for 2008 Subaru Outback Wagon
    According to Thule and Yakima, the 2008 Subaru Outback Wagon is not suitable for use with a trunk mounted bike rack because the rear hatch is not strong enough to carry the weight of the carrier and the bikes. This leaves a roof or hitch mounted system as your remaining options. I would recommend going with the hitch mounted option, which would involve installing a receiver hitch like the Draw-Tite Class II receiver, part # 36334. This hitch will fit your Outback as long as it is not a...
    view full answer...
  • Bike Rack Options for a 2008 Subaru Outback Wagon
    According to Thule and Yakima, the 2008 Subaru Outback Wagon is not suitable for use with a trunk mounted bike rack because the rear hatch is not strong enough to carry the weight of the carrier and the bikes. This leaves a roof or hitch mounted system as your remaining options. I would recommend going with the hitch mounted option, which would involve installing a receiver hitch like the Draw-Tite Class II receiver, part # 36334. This hitch will fit your Outback as long as it is not...
    view full answer...
  • Subaru 2003 Forester Hitch Installation and Platform Style 4-Bike Rack Recommendation
    It's not necessary to use a lift to install a hitch on your Forester, but if you have or can borrow ramps or jack stands from somebody, it will make the installation much easier. If that's not an option, we offer some fairly inexpensive ramps as part # FT11909MI or jack stands as part # PTW41021. Either the Curt # C12038 or the Draw-Tite # 36311 would work fine for you. They install in the same manner, and have identical capacities. Both install with standard metric wrenches or sockets...
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video by:
Joshua S
Employee Andrew L
Video by:
Andrew L
Employee Alan C
Video by:
Alan C
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Andrew S
Test Fit:
Andrew S
Employee Jacob T
Video Edited:
Jacob T
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.