bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # 36588
Retail:$304.28
Our Price: $178.09
You Save: $126.19
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 28 lbs
Quantity: 
In Stock
36588 - 1-1/4 Inch Hitch Draw-Tite Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36588 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (206)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 36588

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 300 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish round-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36588 Draw-Tite Class 2 Trailer Hitch Receiver - 1-1/4"

90248 Hidden Hitch Class 2 Trailer Hitch Receiver

Replaces 36490

Installation Details 36588 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36588

Average Customer Rating:  4.8 out of 5 stars   (206 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Installation of the hitch took me 20 minutes by myself. Would have been faster, but couldn't find my socket extension. I used a swivel on my socket so I didn't have to release the muffler. The hitch mounted up to the factory holes just as the "how to" video said they would. Mine were nice and clean so no extra prep was needed.


Comments
Works great. Will purchase again when I replace this vehicle
Dave H - 03/28/2015


by:
2012 Toyota RAV4

I was nervous after having read some of the other reviews about slightly offset mounting holes, especially since I have a 2012 Rav4.
My order came with my accessories neatly wrapped to the trailer hitch, so nothing was rattling around in the box.
I pulled out the hitch and separated the accessories. I crawled under the car and removed the protective covers from the chassis mounting holes. (Adhesive paper discs) I held the hitch up to the holes and they were perfectly aligned. The hitch mounted very easily. I had to disconnect the two rubber muffler supports to mount right side, abd remove a tie down bracket from the left. The hardest part of the job was fishing the wiring harness, but that was more due to all the trim pieces that had to be opened up, and a tight spot passing over the wheel well.
Getting the positive lead through the firewall wasn't too bad, once I found a spot in the rubber grommet that I could punch a hole through. All-in-all, I'm very happy with the product.




by:

It works! It developed a rust spot on the receiver tube itself without any damage while I had it and within a month or two, but otherwise it does what it needs to do and was easy to install




by:
2009 Toyota RAV4

I had my mechanic do the install along with the wiring harness on my 2009 Rav 4 Limited, told him about the great How To videos that etrailer has and he said it was super easy! It looks great and I can’t wait to use it. Buying my trailer this weekend!! My only concern is did I get the correct size for the small 4X8 open bed trailer??


Comments
This draw-tite class 2 hitch part # 36588
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
$178.09
is rated up to 300 lbs in tongue weight. As long as you do not exceed the tongue weight rating with the small trailer you should not have any issues. If you ever decide to tow a larger trailer you will probably need a higher capacity hitch for your RAV4 such as draw-tite class 3 hitch part # 75235
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
$165.70
. The draw-tite class 3 part # 75235
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
$165.70
can handle up to 675 lbs of tongue weight and is the same exact installation as the class 2.
-- Etrailer Expert Heather A - 11/09/2018


by:
2016 Toyota RAV4

Fits great on my 2016 Rav4, if you live in a place with winter and salty roads, fully expect to have to re-thread the frame nuts, you'll need a 12mm x 1.25 tap.




by:
2007 Toyota RAV4

I purchased this hitch along with a Thule (TH912XT) bike rack. The install was fairly simple and quick on my 2007 RAV4, although a 2nd set of hands will greatly help you out. The only little problem I ran into was with the exhaust. It does need to be moved slightly out of the way in order to install one of the bolts. Otherwise, it was a straight forward install. Quality seems good and it appears to be well built. Only time will tell. If I had to purchase this hitch again, based on what I've seen so far, I definitely would.




by:

Easy install thanks to a great video! I had to contact customer service to inquire about re-installing the plastic panel by the recovery hook. It wasn't mentioned in the video that it would need to be modified (trimmed) to fit and re-attach. It was noted in their database. Great customer service every step of the process. Thank you!




by:
1999 Honda Civic

The hitch is exactly as described. The shipping was incredibly fast and free. Free is almost always a good price. I was afraid "free" meant slow but that was not the case. The hitch was amazingly easy to install. Thanks etrailer for a great experience.




by:

Great hitch. Easy installation and perfect fit. Don't spend money on installation watch the video, you can do it.


Comments
Great no complaints.
Mike W - 08/25/2018


by:
2018 Toyota RAV4

The hitch was appreciated by my son for his Rav4. I was worried when notified it would be over 5 weeks to receive, but etrailer offered to change the order to receive it earlier. The sales people were kind and sympathetic concerning the order. It did come earlier than expected and everything was as promised.




by:

To all you people looking for a hitch look no further best prices and installing there hitch was as simple as putting gas in your car no drilling they supply hardware all u do is bolt it up and enjoy towing your boat As I am or what ever u may




by:

Shows behind the RAV4 more than expectet. Install was about an hour + with home armature mechanic.


Comments
No issues a year later.
Robert - 02/28/2022


by:

The hitch, ordering process and delivery all went well.

The reason for only 4 stars is the over priced brush that is NOT needed. After reading the installation literature I felt it was needed but I think I was gas lighted into thinking there was a need.


Comments
I am sorry that you feel like you wasted your money on the wire brush. Sometimes they are definitely needed to clean weld nuts, especially with vehicles over 5 years, because of all the road debris and possible rust. Here is a help article with the reasoning why we recommend that product.
-- Etrailer Expert Sierra K - 10/19/2021


by:

Very happy with hitch. Good prompt delivery The installation info was very helpfull. Installed the hitch myself in 30 minutes. With help could be done in 15. Have not installed the wire harness yet again your video should be helpfull. Great service great product.




by:

Very happy with everything from your website, ordering, delivery, communication...our lifelong mechanic recommended/told us to order from you. Thanks,greatly appreciated!




by:

I purchased a raw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4". It seems fine so far. I'm disappointed that one of the bolts shipped with the trailer hitch was different than the rest. It would not thread and I had to opt for professional installation, ultimately costing me $90. Poor quality control, if you ask me....


Comments
Yea mine too. 3 bolts fit and the 4th is too big. I think someone at the factory is angry at their boss and screwing up the bolts to make trouble.
-- comment by: dave - 03/02/2014



by:
2009 Toyota RAV4

RAV4 Limited hitch installationHere are some photos of my installation (including Hitch and the wire
harness.

Now, it looks good. I have 2009 RAV4 LIMITED (4-cyl)




by:

Product was exactly as advertised. It showed up at my front door three days after I ordered it. The install was just like the videos showed. A piece of cake to install.

A side note - The video is a great sales tool. I am not a gear head and I had some trepidation about installing a trailer hitch by myself. But after seeing how easy it looked I decided to give it a shot.

I will definitely be telling folks how easy this project was and how nice etrailer is to deal with.


Comments
After one year the hitch and wiring are still working great. They get fairly light usage. I use them to haul my mower on a small utility trailer to a cabin. Ill be moving soon and the trailer will be getting a work out
Andy H - 05/05/2015


by:
2013 Toyota RAV4

Unit arrived before expected and without damage. All parts and procedures were intact and easy to follow.
Definitely needed to prep the existing weldnut holes and a good soak of PB and a small brush did the trick.
Needed some serious manual wrenching, but the 19mm bolts had plenty of threads to secure the hitch. Alignment was very nice, and it would have been a longer job if I did not have a helper.


Comments
So far the hitch has worked flawlessly, and provided easy access for a bike rack. We have taken many road trips with our bikes, and again, the hitch performs without worry.
NewRav - 12/28/2017


by:
Toyota RAV4

I have a small shop and install many of the items sold by etrailer, I find them to be excellent in product quality and customer communications. Fast action on returns and I am satisfied with the products I receive. For this Toyota Rav4, everything went well(hitch & wiring).


Comments
I have a LandRover LR3. Will this hitch fit the LR3? I really like this hitch but I am afraid I will have to remove the full sized spare tire to install it? thanks! Suzanne
-- comment by: Suzanne C - 09/27/2013



by:
2012 Toyota RAV4

Excellent product at a great price! The guys at the tire shop installed it for me and it only took them about 10 minutes. They said it fit perfectly into the predrilled holes of my 2012 RAV4 and only charged me $20 to pop it on for me. Very pleased with this product and the service from etrailer.com.


Comments
Works as expected, not a single issue. Thanks for a quality product at a great price!
Suzanne B - 09/15/2015


by:

The hitch arrived ahead of schedule, it was packaged well and complete. This is my second time purchasing a hitch through etrailer and have been very happy with the experience.


Comments
After a year of use the hitch is still working well!
David S - 08/07/2020


by:
2006 Toyota RAV4

Very easy to install the hitch




by:
Toyota RAV4

INSTALL TIME WAS 45 MINUTES WORKING SOLO. AMAZING FIT AND APPEARANCE. DEFINITELY MADE FOR THIS A TOYOTA RAV4.




by:
2015 Toyota RAV4

Ordered a hitch, online, from etrailer last July. Placing the order was very easy, and the delivery was very prompt. etrailer followed up a couple of times to ensure everything was ok with the product and their service. I had the hitch installed on my SUV by a local auto service, and I use the hitch primarily for my hitch-mounted bicycle rack -- it works perfectly! I also have ordered a few other items from etrailer and their service and delivery was first class again.



25
206
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Draw-Tite Trailer Hitch# 36588 Installation and Rear Jack Point on 2016 Toyota RAV4
    The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36588 for your 2016 Toyota RAV4 will block the rear jack location. I reached out to the manufacturer and you can use the hitch receiver to jack the vehicle up and then use jack stands to take the weight off the hitch.
    view full answer...
  • Recommended 1-1/4 Inch Trailer Hitch for a 2018 Toyota RAV4 SE
    The Hollywood Racks Bike Rack you have has a 1-1/4" shank. The trailer hitch I recommend for your 2018 Toyota RAV4 SE to use with this bike rack is the Draw-Tite Trailer Hitch Receiver part # 36588. The reason that I recommend this over it's counterpart from Curt is because it is more cost effective and it does not require an additional stability strap to be used which can be a pain to put on each time. It also sits back from the bumper a bit more so it will look better but not so much...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2010 Toyota RAV4 that Does Not Require Hitch Lowering
    Lowering exhaust is a pretty standard installation step for a trailer hitch. However, the hitch part # 36588 that has been confirmed as a fit for your 2010 Toyota RAV4 does not require this step. I confirmed this by checking the install instructions which I have linked. I also attached an install video for you to check out as well.
    view full answer...
  • Troubleshooting Draw-Tite Trailer Hitch # 36490 Bolt Installation
    There should only be one size bolt contained in the hardware of your Draw-Tite Trailer Hitch # 36588. These bolts are M12 X 1.25 X 40mm. I have attached a brief video of an installation on a 2008 RAV 4. In the video at the :42 second mark they are showing where the bolt holes are full of dirt. They use a spray lubricant and then they use battery post and terminal cleaner brush # DW00254. (The technician did have to repeat the process several times before the bolt would go through the hole) One...
    view full answer...
  • Why Are There Only 5 Bolts To Install Draw-Tit Hitch On 2017 Toyota RAV4 But Six Holes
    The Draw-Tite Trailer Hitch Receiver part # 36588 for 1-1/4" or part # 75235 for 2" only installs with five bolts as you mentioned. There are indeed six bolt holes on the actual hitch but only five pre-drilled holes in the frame so that is all that is needed. I have attached a photo that shows this for you.
    view full answer...
    Image 1 for
  • Can a 6 x 12 Trailer be Towed Across Country with a 2008 Toyota RAV4
    For towing a trailer that exceeds 2,200 lbs gross trailer weight (GTW) with your 2008 Toyota Rav4, your best option would be to go with a Class III trailer hitch like the Draw-Tite Class III Trailer Hitch, # 75235, which is capable of towing up to 3,500 lbs GTW and 4,000 lbs GTW with a weight distribution system. The Class II hitch that your referenced, # 36588, is only capable of towing up to 3,500 lbs and is not compatible with weight distribution systems. Weight distribution is recommended...
    view full answer...
  • Does Trailer Hitch 36588 For 2012 Toyota RAV4 Require New Wiring Harness
    You only need a new wiring harness if the cargo carrier you mentioned uses lighting functions (or you plan on towing a trailer at some point) with the Draw-Tite Trailer Hitch Receiver # 36588. If it is just a standard cargo carrier without lights, you won't need a new wiring harness with the # 36588; if the carrier does have lights that plug into a 4-way, then you will need a new harness, with the correct fit for your 2012 Toyota RAV4 being the following: - T-One Vehicle Wiring Harness...
    view full answer...
  • What Vehicles does Draw Tite Hitch Part # 36425 Fit
    Draw-Tite hitch, part # 36425, fits 2001-2005 Pontiac Azteks all models. It also fits 2002-2007 Buick Rendezvous all models. If you are looking for a hitch for your 2006 Toyota RAV4 you could check out the Draw-Tite part # 75235. This is a Class III, 2 inch hitch. Or the # 36588, which is a Class II, 1-1/4 hitch.
    view full answer...
  • What are the Differences Among the Class II Hitches Available for a 2009 Toyota RAV 4
    None of the Class II hitches for your 2009 RAV 4 are superior to another, but there are some differences between them they may help you make your decision. Draw-Tite and Hidden Hitch are sister companies and the Draw-Tite, part # 36588, and Hidden Hitch, part # 90207 (no longer available), are the same design. The difference between these two hitches is that the Hidden Hitch includes some extra accessories. The Hidden Hitch model includes a draw bar and pin and clip that you would need...
    view full answer...
  • Trailer Hitch Options and Effects on Rear Lift Gate Feature on 2018 Toyota RAV4
    Vehicles with rear lift gate sensors use several of these across the rear bumper area. Hitch installation on such vehicles usually means that only the centrally-positioned sensor will be affected. Those to the sides of the hitch tube usually function without issue. So, in practical terms, if you were approaching the rear of the RAV4 with arms full of grocery bags you'd just want to swing your foot by one of the side-positioned sensors. There are both smaller 1-1/4-inch Class II hitches...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendation for a 2012 Toyota RAV4
    First let's start with a trailer hitch for your 2012 Toyota RAV4. For that you would want the Draw Tite Hitch part # 36588 as it has been confirmed as a fit for your vehicle. With that installed the etrailer 4-bike rack part e98913 that you referenced would fit and work well. I attached an install video for the hitch and a demo for the bike rack that shows it being used on a 2012 RAV4 just like yours.
    view full answer...
  • Will Lets Go Aero NEO2 Fit 2010 Toyota RAV4 and Clear Spare
    When we installed the Draw Tite hitch part # 36588 on a similar Toyota RAV4 we found that it had 6-1/2 inches from the pin hole to the outside of the rear spare tire cover. The Lets Go Aero bike rack part # B01748 would easily clear that without a hitch extender as it has 18 inches from it's pin hole to the nearest upright mast.
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2015 RAV4 That Doesn't Require Stabilizer Strap
    I have a much better hitch solution I can provide you with for your 2015 Toyota RAV4 that does not require you to use a stabilizer strap. The Draw Tite hitch part # 36588 is a 1-1/4 inch hitch confirmed to fit your vehicle and since Draw Tite does not require the use of the strap with non-supported loads like bike racks it would be the best solution to allow you to not have to worry about messing with the strap. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Will Swagman XC 2-Bike Rack # S64650 Fit 2006 Toyota RAV4 w/ Class II Trailer Hitch Receiver
    Fortunately, our awesome installation crew shot a video of the Draw-Tite Class II Trailer Hitch Receiver, # 36588, being installed on a 2006 Toyota RAV4 so we now know that once that hitch is installed there is 6-1/2 inches from the hitch pin hole to the outer edge of the spare tire. I have attached the video for you. Since the Swagman XC 2-Bike Rack, # S64650, measures 10-1/2 inches from the hitch pin hole to the first wheel hoop, depending on the design of your bikes, you should have...
    view full answer...
  • Recommended Trailer Hitch For 2015 Subaru Legacy
    I see the vehicle you entered is a 2015 Subaru Legacy. The 36490 trailer hitch by Draw-Tite has been replaced with part # 36588. This hitch is designed to fit Toyota Rav4 for 2006 through 2015. That hitch weighs in at about 26-lbs. If you are looking at the trailer hitch for a 2015 Legacy I recommend the Draw-Tite, part # 75673. This is a Class lll hitch and it has a 2-inch receiver opening. I recommend the Class lll hitch because it is much more versatile than the Class ll hitch, part...
    view full answer...
  • Replacement Hitch Installation Hardware & Torque Requirements for Hidden Hitch on 2008 Toyota RAV4
    Torque values for hitch installation hardware vary by hitch. The Hidden Hitch brand has been discontinued but sister brand Draw-Tite still produces both 1-1/4-inch Class II and 2-inch Class III hitches for your 2008 Toyota RAV4 that are functionally identical to the Hidden Hitch products. So the torque values for the Draw-Tite products, # 36588 and # 75235, will apply to your Hidden Hitch. I confirmed this with Draw-Tite. You will want to verify which hitch size you have so that you reference...
    view full answer...
  • Why Are 2 inch Hitches Made for 2017 Toytoa RAV4
    This is a great question. There are two main reasons people prefer the 2 inch trailer hitch size over the smaller 1-1/4 inch. One being the higher capacities like you mentioned but the other is that since this is the most popular hitch size there are more accessories made for it like bike racks, ball mounts, and cargo carriers. So you have more options. That's why we offer 2 inch hitches for your 2017 Toyota RAV4 like the # 75235 you referenced or the more hidden # 76134 which only has...
    view full answer...
  • Comparing 1-1/4 Inch Trailer Hitches for Clearance for 2018 Toyota RAV4
    The Draw-Tite Trailer Hitch Receiver # 36588 will have 4 inches from the center of the hitch pin hole to the outer bumper and will have a ground clearance of 11-1/4 inches. The Curt Trailer Hitch Receiver # C12108 has a hitch pin hole to outer bumper clearance of 3-1/4 inches so it will be better for bike racks and has a ground clearance of 11-1/2 inches. The two hitches will install in the same location and these differences are not much, but I recommend the Draw-Tite # 36588 because...
    view full answer...
  • Will the Thule Helium Bike Carrier Fit a 2015 Toyota RAV4
    The Thule Helium Aero bike carrier # TH9042PRO will fit your 2015 Toyota RAV4. You will be able to open the rear hatch with the carrier tilted down. But it is not recommended to tilt this carrier when bikes are loaded.
    view full answer...
  • Weight of Class II Trailer Hitches Available for 2010 Toyota Rav4
    According to Curt, their Class II trailer hitch part # C12108 weighs in at 34.3 lbs. My Draw-Tite representative tells me that their Class II hitch, part # 36588 weighs right at 28 lbs. Apparently Draw-Tite's figure for the hitch weight was incorrect. Additionally, the 45 lb shipping weight we listed was incorrect as well. If I had to choose between the two hitches, I'd recommend the Draw-Tite model. Curt's warranty states that a stabilizing strap like # 18050 must be used for all non-trailer...
    view full answer...
  • Will the Spare Tire on a 2008 Toyota RAV4 Interfere with Towing a Utility Trailer
    The spare tire should not be a factor if you are towing a trailer. It is a concern for things like bike racks though. With Draw-Tite trailer hitch # 36588 installed we have determined that from the center of the hitch pin hole straight back to the distance required to clear the spare tire is approximately 7 inches. With a ball mount installed the coupler on the trailer will probably be slightly rearward of the spare and of course lower. The only issue is that on Class II trailer hitches...
    view full answer...
  • Comparing the Curt and Draw-Tite Hitches that will Fit a 2016 Toyota RAV4
    There are very few differences between the Curt Class II Hitch 1-1/14 inch , # C12108, and Draw-Tite Class II Hitch 1-1/4 inch, # 36588. Both hitches are very similar when comes to the hitch materials, weight capacities and installation. However, one difference between the two is the Curt Hitch requires you to use a stabilization strap, like # 18050 on all non-towing loads with their hitch. This includes bike racks and cargo carriers. Draw-Tite does not require you to us the strap. If...
    view full answer...
  • Best Way to Carry Bikes with a 2011 Toyota Rav4
    The best option I could recommend for you to carry bikes with your 2011 Toyota RAV4 would be to first install a hitch and then use a hitch mounted bike rack. First you will need to start with a hitch, for that I would recommend the Draw Tite Hitch part # 36588. Hitches are great because not only will you be able to carry your bikes, but now you could do some light towing if needed. For a bike rack the most popular rack we carry is the Swagman XTC2 part # S64670. This is a great rack...
    view full answer...
  • Recommended Trailer Hitch for 2014 Toyota RAV4 to Transport a 2-Bike Rack
    I recommend the Draw-Tite 2 inch trailer hitch # 75235, for your 2014 Toyota RAV4 for three reasons. The cost is lower than the 1-1/4 version, a 2 inch hitch receiver will be more compatible with hitch accessories in the market, and you will not need to use a stabilization strap like the # 18050 with the Draw-Tite hitch like you will with the Curt branded hitch stated by their warranty. For a great 2-bike rack that can fit either the 2 inch # 75235 or 1-1/4 # 36588 hitch receiver, I recommend...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Randy B
Test Fit:
Randy B
Employee Robert C
Test Fit:
Robert C
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.