bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class V
  4. 2 Inch Hitch
  5. 10000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

Item # 41945
Our Price: $261.54
You Save: $148.50
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 48 lbs
Draw-Tite Custom Fit Hitch - 41945
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" part number 41945 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (228)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 41945

  • Class V
  • 2 Inch Hitch
  • 10000 lbs GTW
  • Visible Cross Tube
  • Draw-Tite
  • 1500 lbs TW
  • 12000 lbs WD GTW
  • Custom Fit Hitch
  • 1200 lbs WD TW

Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Fully welded steel construction with computer-aided design ensures strength and durability
    • Heavy-duty side brackets and wiring connector mounting bracket are also welded on
  • Reinforced, cast center section ensures the highest tongue weight capacity possible
  • Oversize safety-chain loops are easy to access
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 10,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 1,500 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Limited lifetime warranty

Ultra Frame Design with Cast Center Section

Specifically designed for a serious towing machine, this rugged trailer hitch receiver features the strong, durable construction that your heavy-duty applications require. The secure side-bracket design and all-frame attachment system ensure maximum stability. The cast center section lets you pile on the tongue weight without any worries. And the reinforced pin hole and large safety-chain loops better accommodate your heavy-duty towing needs.

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real-life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

41945 Draw-Tite UltraFrame Class 5 Trailer Hitch Receiver with Cast Center

Replaces 41926

Installation Details 41945 Installation instructions

This Product Fits The Following Vehicles

Weight Carrying Capacity
Gross Towing Weight (GTW):
10,000 lbs.

Tongue Weight (TW):
1,500 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.

Tongue Weight (TW):
1,200 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , If present, the carbon canister must temporarily be lowered for hitch installation

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" - 41945

Average Customer Rating:  4.9 out of 5 stars   (228 Customer Reviews)

Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.


the hitch I purchased is a high quality unit, easy to install and fits as expected. We use the hitch for towing, but it doubles as a location to mount my hoyer lift that puts me in my cyclekart!


It is well built and installed nicely. I was not expecting it to stick out as far as it does. The installation video shows it more recessed under the bumper allowing for room to mount trailer light connections.


We installed this on our E150 campervan so we could haul extra cargo or a bike rack. It's definitely more hitch than we need since we're not towing anything (yet). We landed on this particular hitch because the price wasn't much different than the lower-class models, and - the big selling point - this one didn't require any frame drilling for installation.

Speaking of, installation was straightforward and easy to understand. I managed to install it by myself, though as with any hitch it would be easier with an extra set of hands. I used a jack stand to hold the other side of the hitch in place.

The hitch is ridiculously strong and I would have no reservations about hauling some serious weight if I had an accessory that fit snugly in the receiver.

The only complaint I have is that the receiver has too much play. It's listed as a 2" receiver, but both of the 2" accessories I use (and several others I tried at the store) have a lot of "slop" as the opening actually measures something like 2-3/16". (See photo) Adding the bolt to secure the hitch in the receiver steadies lightweight loads, but I would be concerned that the stress of a heavy load would be too much for that connection point.

Works well for our use - we are usually either hauling a cargo bin or a bike rack, so this hitch handles those items nicely.
Josh S - 04/07/2021


Even with one spacer hole to small that I had to drill out, this was an extremely easy install and appears to be a very sturdy heavy duty hitch. The price was good with free shipping. I’m pleased with my purchase.


It mounted up without a hitch! Haha. Super easy mounting and I have hauled 2-1/2 yard concrete trailer and hay wagon and excavator behind my van thus far and I have zero issues. I had to modify my electrical connection bracket but to me that kind of thing can be expected

Still working great! Use my 6-bike rack on it all the time and no complaints at all. It works and that’s all I need it to do.
Cord - 03/16/2022

2007 Ford Van

Went on easy, perfect fit, did it by myself with the help of a hydrolic jack to hold it up. Took about twenty minutes. Customer service was quick to respond for getting feedback, very appreciated! Review pictures of install helped make my decision, and a great price also. Made in Mexico, however, hopefully will be made in USA soon.

Super great, no rust yet, still solid...pulls my 5k pound boat no problem!
Harlan - 08/25/2020


Jay was great and helped me get teh right hitch and e-brake for my Ford E350 Bus which is an unusual vehicle. The Shipment was quick and free. I can't wait to install everything.


Product went on as described in the video. Did struggle a bit to get the socket on the nut with the way the crossbar fits through the weld. Other than that I don’t know why I put it off as long as I did.

Have used the hitch a lot over the last year no issues what so ever. Have crawled under just to check for coming loose and still no issues at all didn’t have to tighten anything.
Travis - 06/23/2021


I received my hitch when they said it would be there. The over condition of the product is excellent,and the installation instructions are very easy to follow. I had the hitch installed in less then 30 mins. I highly recommend etrailer for all your towing ,and hauling needs. Fair prices and great customer service.

2006 Ford Van

Simple installation by myself. No drilling required was my biggest need,as I didn't feel like dropping $20 on drill bits to get through hardened steel. Took 15 or twenty minutes to get it all bolted up.

No problems whatsoever. Been towing pontoon every weekend. No corrosion on receiver. All hardware still tight, have recommended etrailer to several people since.
Terry D - 08/31/2020

2004 Ford Van

I recently bought a Ford E350 van for towing and camping. I needed to install a trailer hitch.
I shopped [another online retailer] as well as local RV stores and then remembered etrailer. I found the hitch I needed at the lowest price and as luck would have it, a Sunday free shipping offer. The hitch arrived quickly and fit perfectly.
Another good experience with etrailer.


The only issues I had with hitch was sticker location on hitch was hard to read as was placed in wrong location. Once hitch is installed, you cannot read load rating decal The kit could use a few m5ore shim washers.


I have been doing business with etrailer for almost 10 years, for my personal and work related needs. Always received quality products at a reasonable price with great customer service. The hitch receiver I installed today took almost an hour to install, the instructions included were straight forward and NO drilling, a plus, packed well with all the hardware needed for the install.


I'm very happy with the entire etrailer experience. From web site ordering, price, installation, everything went smoothly. No missing parts. Easy to follow instructions. Couldn't ask for more. The Ultra Frame Draw-Tite hitch is built like a rock too.

2007 Ford Van

I received my hitch really fast after ordering!!! I was notified it's location while it was in route. This hitch is extremely well made. And bolted right up to the factory holes in the frame(NO DRILLING!!) Very easy installation. I highly recommend this hitch! A++++

by: 07/26/2022

Awesome!! It fits perfect it came with everything is needed for the installation super easy to install. Thanks etrailer.


The hitch fit perfectly and left just enough clearance for the spare tire. My only problem was that one of the locking nuts came without threads. I could not get the same nut so had to purchase an SAE bolt, flat washer, locking washer and nut.


Great quality. Problem free installation
2005 E350 Super Duty van.


High quality, brand name product. Hitch and wiring harness were easy install.

Customer service second to none!


Excellent quality. Fast shipping. Exactly what I wanted. Beefy construction and rated far above any trailer weight I will ever haul (just the way I like it). Eat your "Wheaties" boys, before you install this beast. Very heavy with cast iron receiver. You won't be disappointed.


I bought this for one of my work trucks and it fit as it should and works fine. I have bought several items from etrailer and the service and products have all been top notch!


I am really impressed with how easy this hitch was to install, finished the job by myself in around 45 minutes! Now for some wiring, and I am ready for my first trip, thanks Etrailer!

2006 Ford Van

Love the hitch and installation was perfect. Hate the drag chain attachments. It appears impossible to attach a 10,000 lb. rated chain hook.

2014 Ford Van

Does what it was meant to do.
A little
hard to mount.
Your going to need a heavy duty torque wrench.
Very happy with it


First of all let me mention that this is third hitch I have purchased in past two years and I'm always impressed with customers service and fast shipping. The quality of the last one was little bit less than I was expecting. The coating was chipped on multiple places before I installed it and it was not due shipping. The box is in excellent condition. Attached are few pictures.

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Will Draw-Tite Ultra Frame Trailer Hitch Receiver # 41945 Fit 2006 Ford E-350 Extended Length Van
    I spoke with my contact at Draw-Tite and yes, the Ultra Frame Trailer Hitch Receiver, # 41945, will fit the 2006 Ford E-350 Extended Length Van. This hitch fits both the regular and extended length van and will install in the same way. I have attached the installation instructions for you.
    view full answer...
  • Why is Tongue Weight Rating Higher for Draw-Tite Hitch Receiver when not Using Weight Distribution
    The Draw-Tite Ultra Frame # 41945 does have a lower tongue weight rating when used with a weight distribution system. You're correct that it's normally the other way around. I reached out to Draw-Tite for a specific reason but they couldn't provide me with one. The vague answer is basically that when tested there was something that made an impact to the hitch receiver's tongue weight capacity.
    view full answer...
  • How to Determine Trailer Hitch Class on 2003 Ford E-350
    The trailer hitch capacity and class rating should be listed with a sticker on or around the trailer hitch receiver on your 2003 Ford E-350. If you cannot locate this information, I recommend visiting your local Ford dealer with the VIN and if the hitch was installed at the factory, they will be able to tell you its class and weight capacity. Because Class III and IV trailer hitches have the same size receiver opening, it will be very difficult to determine its capacity based on appearance...
    view full answer...
  • Dimensions of Draw-Tite # 41946
    The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41946 is a confirmed fit for the 1996-2018 Chevy Express and GMC Savana Vans. There is not a confirmed fit for any E450 models, but I did measure the hitch as you requested to see if you can confirm a fit on your 2006 Winnebago Outlook. The width is 40-11/16 inches center on center. The holes on the sides are 1-1/2 inches on center 11-1/2 inches on center and 3-7/8 inches on center back to front. I've attached a photo...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for a 2011 Ford E-350
    As long as your rear bumper looks the same as the one I have attached a photo of, the Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41945 will fit and work well for your 2011 Ford E-350. This is a Class V hitch with a 2" receiver tube opening. It also comes with a lifetime warranty. In regards to use an adapter like a hitch extender, the tongue weight and gross trailer weight capacity of the hitch/vehicle will be reduced by 50%. You will need to keep this in mind moving forward....
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver for 2002 Ford E450 Chassis
    The trailer hitches you mentioned are all confirmed fits for your 2002 Ford E450. I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41945 due to the strength of the hitch and the tongue weight rating. This hitch has a rating of 1500 lbs for tongue weight, but you will need to check what your vehicle is rated for to confirm your limit. This will give you a 2 inch receiver opening for use with most accessories and ball mounts.
    view full answer...
  • High Capacity Hitch for Thor 31-Foot Class C Motorhome Built on 2002 Ford E450 Chassis
    We do offer options in both Class IV and Class V hitches, shown on the linked page, that fit the base Ford E450. I contacted Thor Motorcoach to try to confirm the net towing capacity of your 2002 Class C built on a 2002 Ford E450 cab and chassis, but since there are several series and multiple models of Class C made on that same platform Thor needs the VIN in order to confirm the actual net towing capacity of any given vehicle. It is possible your Thor owner's manual will indicate this...
    view full answer...
  • Which Trailer Hitch Fits on a Ford E-350 Van
    To replace the factory hitch on your 2002 Ford E-350 Super Duty Van you can use the Draw-Tite Ultra Frame # 41945 which has the bolt holes 38-5/8" apart (center on center). This hitch will be the perfect replacement for your factory hitch. I've linked the installation video, as well as a photo that shows this hitch mounted on a similar model year Ford E-350 Super Duty van. I've also linked our entire selection of hitches that will fit on your van for you to have a look at as well.
    view full answer...
    Image 1 for
  • Distance Between Mounting Holes on Draw Tite Hitch # 41945
    The distance between the mounting holes from side to side on the Draw Tite trailer hitch part # 41945 are 38-1/2 inches. This hitch fits the following vehicles: 2004 - 2014 Ford Van E-150 2004 - 2014 Ford Van E-250 2004 - 2014 Ford Van E-350 2000 - 2003 Ford Van Full Size, including Superwagon
    view full answer...
    Image 1 for
  • Strength of Cast Receiver Section of Draw-Tite 41945 Ultra Frame Receiver Hitch
    It sure won't. The cast receivers used by the Draw-Tite UltraFrame Hitches like the # 41945 are extremely tough and have been fully tested to ensure they meet the 10K GTW/1500 lb tongue weight capacities. As long as the weight capacities aren't exceeded, you'll need not worry about breaking/damaging the hitch. I've linked to an installation video that you might find helpful.
    view full answer...
  • Dimension for DrawTite part #41945
    The distance is 13" from the center of the forward most bolt hole to the back of the cross section is 13". Please see the attached photo.
    view full answer...
    Image 1 for
  • What is Distance Between Mounting Holes of Trailer Hitch that Fits 2006 Ford E-450
    For a 2006 Ford E-450 like what you have the standard frame hole dimension width for the install of a hitch like the # 41945 is 38-5/8 inches. There aren't any options that are 40 inches for this dimension so is it possible the measurement you took was off?
    view full answer...
  • How Much Does Draw-Tite Ultra Frame Trailer Hitch Receiver 41945 Weigh?
    Absolutely! The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41945 you were looking at for your 2008 Ford E-350 weighs in at 48lbs. I included a video of the # 41945 being installed for you to take a look at.
    view full answer...
  • Will Draw-Tite Hitch for 2001 Ford Van Work with Step Bumper
    Yes, the Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41945 is a fit for a 2001 Ford Van with step bumper. I have attached a photo below of the hitch installed on a model with a step bumper.
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for a 2002 Ford E-450 RV Cutaway Motor Home
    The only hitch that is going to work for a 2002 Ford E-450 RV cutaway model is a multi-fit motor home hitch like # 13703. Measure the outside to outside frame distance. If it is 22 to 72 inches wide you can use this hitch. I have included a link to the installation instructions for you to view.
    view full answer...
  • Trailer Hitch for 2012 Ford E-350 Van with Standard Bumper
    We offer several classes of trailer hitch for the 2012 Ford E-350 van with standard bumper and all can be seen on the link provided. Draw-Tite offers two Class IV and V hitches, parts # 41906 and # 41945, that offer, respectively, 1000-lbs and 1500-lbs of tongue weight capacity. Both are confirmed by my contact at Draw-Tite to fit the 2012 Ford E-350 van with standard bumper. Both hitches have a 2-inch receiver tube that will sit below the top of the frame rails a distance of approximately...
    view full answer...
  • Rear Hitch for 2008 Ford E-150 Step Bumper Hitch
    Among the hitches offered for your 2008 Ford E-150 van, all shown on the linked page, the Draw-Tite Class V hitch # 41945 will extend furthest to the vehicle's rear. In fact this hitch extends rearward past the bumper on the vehicle shown in the linked install video.
    view full answer...
  • Mounting Hardware for Draw-Tite Ultra Frame Trailer Hitch Receiver
    Yes, we are pleased to offer the Replacement Hardware Kit for Draw-Tite Trailer Hitch Receivers # RHK. This kit will enable you to install your trailer hitch receiver. When you find the part # RHK, there will be a space to enter the hitch manufacturer and hitch part number # 41945 and you will get the exact same hardware that was originally included.
    view full answer...
  • Recommended Trailer Hitch for 2003 Ford E450 Chassis
    The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41945 is a confirmed fit for 2000 - 2003 Ford Van Full Size and may fit your chassis. I recommend checking the dimensions of the frame holes as this hitch's mounting holes are 38-1/2 inches on center. This hitch is rated for 1,500 lb tongue weight and 10,000 lbs towing. This hitch will be dependent on the chassis and will not work if it has been extended. Your alternative if you don't have these holes is the Multi-Fit...
    view full answer...
    Image 1 for
  • Does Trailer Hitch from 1999 Ford E-150 also Fit 2001 Ford E-150
    Yes, a hitch from a 1999 Ford E-150 would also fit a 2001. For example, the Draw Tite part # 41906 fits both years and would be a great option. You might still verify the part number of the hitch if you can find it.
    view full answer...
  • Measurement of Trailer Hitch Receiver for 2009 Ford E-250 Van
    For your 2009 Ford E250 van the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41945 is a great option and will stick out 4-1/2 inches from the bumper. I've attached a photo with dimensions to assist. I've attached the link to trailer wiring as well to assist. If you need a ball mount as well, they will measure from the hitch pin hole to the center of the hitch ball. I recommend the etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900...
    view full answer...
    Image 1 for
  • Dimensions of Draw-Tite Trailer Hitch 41945 for Fitment on E-450 Cutaway Chassis
    I reached out to my contact at Draw-Tite who was able to give me the dimensions for the Trailer Hitch # 41945. He said that the # 41946 is for GM frames so it won't fit your Ford E-450 Chassis. From the rearmost hole to the end of the receiver measures 8-5/8" and then from that same hole to the middle and forward-most holes measures 2-3/8" and 10-1/2" respectively. From side to side the back 2 holes measure 38-5/8" apart while the forward-most holes measure 38-7/16" apart.
    view full answer...
  • Possible Hitch to Fit 2010 Ford E-450 Thor RV Application
    If the bolt holes on the frame of your 2010 Ford E-450 RV are 38-5/8 inches apart from left to right the # 14055 can fit but the hitch you referenced has not been confirmed as a fit so I would not recommend it.
    view full answer...
  • Will the Curt 14055 or the Draw-Tite 41945 Extend Past the Bumper Further on an 06 E-350?
    The Curt # 14055 will actually sit just about flush with the edge of the bumper once installed on your 2006 Ford E-350. Though this will meet the weight capacities you need, if you are looking for something to completely clear the bumper, it will fall a little short. No pun intended. On the other hand, once the Draw-Tite # 41945 is installed, the center of the hitch pin hole will extend out 1-1/2 inches from the edge of the bumper. This is also the highest rated hitch we have available...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Patrick B
Test Fit:
Patrick B
Employee Nicholas E
Test Fit:
Nicholas E
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Michael B
Video by:
Michael B
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Mike H
Video Edited:
Mike H
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924