bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75153
Retail:$355.79
Our Price: $192.82
You Save: $162.97
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 38 lbs
Quantity: 
In Stock
75153 - Class III Draw-Tite Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75153 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (162)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 75153

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 350 lbs TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75153 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

70778 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75153 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75153

Average Customer Rating:  4.9 out of 5 stars   (162 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:
2008 Lexus RX 350

My wife drives a 2008 Lexus RX350 and the exhaust system made it difficult to install most hitches for her handicap cart lift. I found this Draw-Tite custom fit hitch and it installed and worked fabulously for our application. You simply cannot beat the quality of Draw-Tite hitches OR the customer service of etrailer.com! Thank you once again!


Comments
It’s been a year since purchasing our Draw-Tite hitch and we couldn’t be happier. I’ve experienced no issues and even the powder coat paint still looks new! Great hitches!
Dennis - 10/12/2022


by:
2005 Toyota Highlander

Hi,
Just wanted to put up my review.
Orderd parts and they arrived in a timely manner. The box has a huge hole in it due to the good ole post office not etrailer. I was afraid parts would be missing but the way etrailer packaged every thing all was in the box. It took me literally 5 minutes to put take off the tow bars on highlander and install the tow hitch. Wiring instruction were ok but the video instructions were right on and it only took approx 7 minutes to do wiring. Thank you etrailer for a easy project that even a girl can do!!! :-


Comments
Are you happy with how far the receiver sticks out below the bumper? I am concerned about which brand to buy.
-- comment by: Cycling G - 05/23/2013

Hi Cycling Guy,I am very happy with it. I feel it protrudes out just enough. It literally only took 5 minutes to install with the air hammerjack tool. Etrailer made sure I also got the right wiring I needed and nothing had to be spliced. That took a little longer maybe 15-20 minutes. The video explains everything VERY well. Good luck and have a great day :-
-- comment by: Paula - 05/28/2013
It has been over a year and product still in excellent condition. I use often and it is excellent quality. Etrailer is a great company and would order from them again.
Paula - 10/30/2014


by:

Construction of the hitch receiver looks very solid. No visible issues with welds or paint coating.

I installed this on my 2004 Highlander. I do a lot of DIY stuff around the house, but not much auto work, so I was initially intimidated to do it myself. After seeing a couple install videos, I saw that there really wasn't much that could go wrong. No jack stands or advanced equipment needed. You don't need an extra person to help either. I got a $xx 3.8 inch torque wrench from [retail store] and watched a couple [online] videos to make sure I wasn't missing anything. I used a milk crate and one of my kid's toy buckets to hold the hitch receiver up within a couple inches of the bolt holes. The rest was just tightening the bolts down with a ratchet and then with the torque wrench.




by:

The hitch arrived within a few days and only took about 20-30 min to install. The instructions and the videos were very useful. It was all simple and easy to complete.

I selected this hitch as I liked its curved appearance. I also liked that it protruded a bit off the bumper so any tie-downs I set up when using the roof rack don't rub against the bumper. Furthermore, it provides better clearance with the back hatch so it can be opened with some hitch accessories installed. It also serves as a quick platform to step on when using the roof rack.

Overall, I am super pleased and have used it several times already. Works great!




by:
2004 Toyota Highlander

Overall I'm happy with the DT hitch. I installed it on my 2004 Toyota Highlander. I went for the DT over the Curt because it has the extra hole to use an anti-rattle J-pin. If the Curt had that, I would've probably went that way.

Starting with the packaging and shipping: the shipping was pretty quick although it looked like the box had been dropped a few times. One side of the hitch had blasted through the shipping box. This could possibly be remedied by over-wrapping the hitch ends with some thick cardboard or low-E foam in bags to make the ends less of a hard point. The result was minor scuffing of the paint...not a biggie for me.

The fit and finish of the trailer hitch was good, not great compared to the Curt hitch I put on my wife's minivan. DT hitch's welds were not as neat and clean and had spatter in various spots. The powder coat didn't look as of high quality as compared to the Curt.

It does stick out a bit more than I would like (roughly 1 3/4") but I don't think I'll be banging my shins on it when I'm taking things out of the trunk. A fair amount of the hitch is visible from the rear and I think I just need to get used to the look of it.

Overall, its a solid hitch and I'm happy with it. The main reason I bought the DT is because it has the extra hole for an anti-rattle J-pin. But if that isn't a need of yours, you wouldn't go wrong with the Curt hitch.


Comments
It’s been great. No issues, haven’t hit my shins on the hitch once!
CanadianBacon - 04/01/2018


by:
2006 Toyota Highlander

The Draw-Tite Max-Frame Trailer Hitch Receiver for our 2006 Highlander fit perfect and was relatively easy to install. I used banker boxes to support the trailer hitch while I screwed in the bolts and the job was completed in 30 minutes. We were then able to use our tow-hitch 4-station bicycle rack to go on an wonderful afternoon ride. Looking forward to many more with this durable product.




by:

So easy to order and install. I saved so much money for a top-quality product. Etrailer.com will be my go-to for all my trailer hitch needs.




by:
2007 Toyota Highlander

The hitch was as described. We removed 4 bolts with brackets and put in the 6 provided bolts with washers to hold the hitch. Less than 30 minutes including the final torques. Even though the vehicle is 10 years old there was no trouble with rust in the holes that only had the rubber plugs. Photo attached.




by:
2008 Lexus RX 350

The box was broken, the product was scraped. The “powder coat” was scraped off in numerous places so if it scraped off in shipping, it won’t last under the car either. Would have sent it back but I needed it. I should have read other reviews because others have said the same.


Comments
I apologize for the state of your hitch. Customer Service will be reaching out to you about this issue.
-- Etrailer Expert Sierra K - 09/03/2021


by:

Solid hitch, does the job. Can be used as a step to reach to the roof.




by:
2008 Lexus RX 350

The hitch was a snap to put on the car - EASY!!! Took 15 minutes max from start to finish. It looks well made and rugged. A HUGE negative for me, however, is how far from the back bumper it sticks out. It is easy to knock your shin on it and looks obnoxious. I thought it would be tucked under the bumper or at least flush with the bumper but it is not. I am NOT AT ALL happy with how far it sticks out. The quality, however, does appear to be top notch. If you could make one that doesn't stick out and exchange it I would be 1050% HAPPY!!!!!




by:
2008 Lexus RX 350

Hitch receiver made well but barely fit my SUV. Bolt slip slots not long enough or entire receiver .50 too short in length. Each bolt was hard up against it's slot end. Had to grind washers as they were riding in the radius. Shipping box had numerous holes in it, not packaged well.




by:

Easy to install trailer hitch, easy to install bike rack. Couldnt have asked for any better




by:

Perfect fit and works perfectly - love that you can use as a step as well.




by:
2007 Lexus RX 350

So simple and easy to install! The video explained the process very well.




by:
2007 Toyota Highlander

Of the three available hitches for my Highlander hybrid, this DrawTight was the one most recessed, so very little but the receiver is visible.

Free shipping arrived (UPS) in three days. All holes lined up perfectly. Installed in 20 minutes without jacking or lifting. I had expected it to be fairly straightforward, but it turned out to be rediculously easy. (Don't tell my wife...)


Comments
I just bought an 06 Highlander and am looking for a hitch that will NOT stick out too far beyond the bumper. Can you send any photos? If possible I am looking for a side view.Any input from others that have a Highlander and have various brands of hitch would be appreciated.Thanks a lot
-- comment by: Cycling G - 05/23/2013



by:
Lexus RX 330

Ordered a trailer hitch for my Lexus RX 330 from etrailer. It was shipped properly and arrived in perfect condition. Online videos were helpful and described the installation process. Was easy to install and looks great on the car! I installed it in about 20 minutes, mounted my bike rack on it, and hit the road! Product was exactly as described and was an excellent quality hitch! I highly recommend purchasing from etrailer!!




by:
Lexus

The product is well made and packaged with plenty of protection (the box made an excellent ground cover to lay on because I didn't have any way to lift the rear end of my Lexus so I had to lay on the ground). A standard milk crate was just the right height to help maneuver the hitch into place. The "etrailer" decal was applied upside down so it ended up stuck to my tool box. Installation took all of 15 minutes. My son-in-law had my torque wrench so I dropped by my local auto mechanic and he torqued all 6 bolts for me (no charge).
Using the hitch for my bike rack




by:

High quality!!! I had a car hit me from the back and the hitch saved my rear bumper… and it looked like nothing happened. I cannot say the same for the front of the car that hit me though…




by:
2007 Lexus RX 350

Great website. easy ordering. the videos of products and installations are very good and helpful. the package came quickly and was installed with no problem.
great product.
Very happy.
thank you.




by:

Fits the car. Gets the Job Done.




by:

Great product and fast shipping. I wish I didn't have to take off the Etrailer sticker due to it being installed upside down.




by:
2008 Lexus RX 350

For purposes of a relatively simple and inexpensive hitch DIY installation, I chose the Draw-Tite Hitch offered by e-trailer. My intended use will be the support for a bike carrier. This eliminates the concerns regarding the lighting harness, ball and accessories, towing weight capacity, sway, load-leveling, etc.

I was impressed by the expeditious free shipping. Also, the packaging for a relatively heavy steel item was well designed, protective and easily opened.

I've had to go to the hardware a couple of times for the appropriate ratchets needed to remove existing hauling brackets under the car. A plastic sledge also proved useful. Remaining challenges include finding a way for a one-man attachment of the hitch and also accessing a torquewrench to measure the required 38 foot-pounds of torque on the six nuts. Will likely research tool rentals for this since torque wrenches start at close to $100.




by:
Ford F-250 Super Duty

The hitch arrived a day early and installed very easily. I plan to tow a single axle aluminum car trailer with the Lexus instead of the F250 that uses a lot of gas! BTW Lexus has a trailer pigtail that plugs directly into the wire harness without cutting and splicing.


Comments
It has continued to be a great addition to the vehicle.
James R - 06/26/2018


by:
2009 Lexus RX 350

Excellent choice for a 2009 Lexus RX350. Put on without help in less than two hours. Had to remove 2 unnecessary brackets on Lexus prior to installation. Great choice.



25
162
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Torquing a Hitch for a 2007 Toyota Highlander
    I will provide a link to the installation instructions below. The instructions contain the correct torque specifications.
    view full answer...
  • Replacement Hardware Kit for Draw-Tite Hitch # 75153 on a 2005 Toyota Highlander
    What you will need is to get the Replacement Hardware Kit # RHK, when you order this you will need to enter the part number for the hitch you have, in your case you would enter the number 75153, select the brand Draw-Tite from the drop down window and then hit add to cart.
    view full answer...
  • Why are Hitches for a 2005 Toyota Highlander Not Rated for Weight Distribution
    You're correct. A class III hitch is typically rated for use with weight distribution. However, the Highlnder is one of a few exceptions. According to our hitch manufacturers, a hitch installed on a 2005 Highlander isn't compatible with weight distribution. This is because the vehicle uses unibody construction instead of a conventional frame. A weight distribution system applies a great deal of leverage and torque to the vehicle frame (much more than what would be applied in a normal towing...
    view full answer...
  • Will Draw-Tite Hitch Work On 2005 Toyota Highlander With Longer Muffler
    I called my contact at Draw-Tite about your 2005 Highlander. They told me that the # 75153 trailer hitch is designed to fit a Highlander with a stock muffler. If your muffler is not a stock muffler, we cannot guarantee a fit. I have attached a photo of the hitch installed on a Highlander with a stock muffler.
    view full answer...
    Image 1 for
  • Why is Towing Capacity Higher on a 2010 Toyota Highlander with Factory Tow Package than One Without
    A factory tow package can consist of several different components depending on the manufacturer. Those items could include different suspension, gearing, various coolers, and other items. The bottom line is that you have to go by what the vehicle manufacturer/owners manual says. If your 2010 Toyota Highlander did not come with the factory tow package then you are limited to the capacity specified in the owner's manual for your trim level. Having a higher capacity trailer hitch will not...
    view full answer...
  • Hitch Recommendation for a 2006 Toyota Highlander
    We have rear mounted hitches available for our 2006 Toyota Highlander, but we don't carry any front mount hitches. For a rear mount hitch I would recommend the Draw Tite Hitch part # 75153. This is a Class III hitch that will fit the hybrid and non-hybrid models and should work very well for you. I attached an install video for you to check out as well.
    view full answer...
  • Would a Hitch from a 2006 Toyota Highlander Fit a 2007 Highlander
    Yes, a hitch from a 2006 Toyota Highlander would fit a 2007 Highlander. For example the part # 75153 fits 2006 - 2007 Highlanders. If you are swapping a hitch from one to the other you would need new hardware as the hardware is considered one time use. You would need part # RHK.
    view full answer...
  • How to Determine if a 2010 Toyota Highlander has an OEM or Aftermarket Tow Package
    The only way to really know if your 2010 Toyota Highlander has the factory tow package or not is to contact your local Toyota dealer with your VIN and they can let you know. Aside from that the only thing I could really find in searching online is that models with the tow package will have a 150 amp alternator. All of the hybrid models came standard with a tow package. I did attach a link to our fitguide and a few helpful articles on trailer towing that you can check out. The fitguide...
    view full answer...
  • 2006 Lexus RX400h Hitch Recommendation
    The hitches we offer for your 2006 Lexus RX 400h like the Draw Tite hitch part # 75153 do not have the tongue weight capacity for the weight of your motorcycle as this hitch has a capacity of 350 lb tongue weight. Only solution you'd have is a small trailer towed by your vehicle with this hitch installed.
    view full answer...
  • Weight of the Draw-Tite Class III Trailer Hitch Receiver for a 2004 Toyota Highlander
    The DrawTite Custom Class III, part # 75153 weighs about 37 pounds. This is a confirmed fit for the 2004 Toyota Highlander, both the Hybrid and Non-Hybrid models. I've included a video of the installation of this hitch onto a 2004 Toyota Highlander so you can get familiar with the process. Additionally, the Draw-Tite Custom Class III fits: 2004-2006 Lexus RX 330 2007-2009 Lexus RX 350 2006-2008 Lexus RX 400h
    view full answer...
  • Troubleshooting Weld Nuts for Hitch Installation on 2006 Toyota Highlander
    It is often necessary to clear out the frame weld nuts used to mount a hitch. Especially on vehicles that are a few years old there can be some slight corrosion within the threads on those nuts that can make it tough to get the bolts started. You can refer to the two linked articles for help. A spray-on lubricant/solvent like WD40 or PB BLaster can help dissolve that rust/grit and make it possible to thread in all of the fasteners included with your Draw-Tite hitch # 75153. Your hitch...
    view full answer...
  • Recommendation for a Trailer Hitch to Fit a 2006 Toyota Highlander
    I have a hitch that will fit your 2006 Toyota Highlander. However, the hitch part number that you supplied is not a good number in our system. I have no way of knowing if it is a confirmed fit. However, Draw-Tite does have the Max Frame Class III Hitch, # 75153. This hitch is a custom-fit trailer hitch that is confirmed to fit the 2006 Toyota Highlander. The hitch installs to your vehicle using existing holes in the frame. No drilling will be required during installation. I have attached...
    view full answer...
  • Will Draw-Tite Max-Frame Trailer Hitch # 75153 Fit 2007 Lexus RX 350
    Yes, the Draw-Tite Max-Frame Trailer Hitch # 75153 that you received is the correct hitch for your 2007 Lexus RX 350 and it will work perfectly. Most likely the instructions from Draw-Tite simply haven't been updated to include this particular Lexus model as a fit at the top of the instructions manual. I did also verify with Draw-Tite that this is the correct hitch for your vehicle. I have attached an installation video of us mounting this hitch to the 2007 Lexus RX 350 that you can use...
    view full answer...
  • Does Draw Tite Hitch 75153 Fit Hybrid and Non-Hybrid 2006 Toyota Highlander
    Sorry for the confusion but the Draw Tite hitch part # 75153 does fit both the hybrid and non-hybrid models of the 2006 Toyota Highlander. We do have in our fitguide for hybrid models and non-hybrid models so it's pretty easily confused.
    view full answer...
  • Is the Rear Spare Tire Accessible of a 2006 Toyota Highlander with a Trailer Hitch Installed
    The spare tire of your 2006 Toyota Highlander will still be accessible with the Curt hitch part # 13530 installed. The cross tube does slightly cover one corner of the spare so you may have to angle the spare back as you raise or lower it, but it will still be easily accessed. I attached a picture that shows how much of the spare will be blocked and how it compares to the install of the Draw Tite # 75153.
    view full answer...
    Image 1 for
  • Trailer Wiring Recommendation for a 2004 Toyota Highlander with Tow Package
    For trailer wiring for your 2004 Toyota Highlander with the tow package you would want the Tow Ready harness part # 118248 for trailer wiring. I attached an install video for you to check out as well.
    view full answer...
  • Spare Tire Interference with Hitch Installation on 2006 Toyota Highlander with 3rd Row Seat
    The Curt trailer hitch you referenced, Class III hitch # 13530, is shown in the linked video being installed on a 2006 Highlander. On this vehicle the spare tire does not need to be removed. My technical contacts at Hidden Hitch and Draw-Tite have not heard of any issues on the 2006 Highlander related to the spare tire interfering with hitch installation. To their knowledge the 3rd seat is not an usual feature. The instructions for all three hitches offered for the vehicle make no reference...
    view full answer...
  • Hitch Recommendation for a 2004 Toyota Highlander
    There was a generation change between the 2003 and 2004 Toyota Highlanders so a hitch from one wouldn't fit the other. For a 2004 Highlander you would want the Draw-Tite # 75153. I attached an install video for you to check out. For trailer wiring you would want the # 118413 that has been custom designed to fit your vehicle.
    view full answer...
  • Which Ball Mount is Right for a 2007 Lexus RX350 Towing a Trailer With a 12 Inch Coupler Height
    The Draw-Tite hitch model # 75153 will sit right below the bumper on your 2007 Lexus RX350, so your 17 inch measurement from the underside of the bumper to the ground should be pretty close to the installed hitch height. If you are measuring to the bottom, flat part of your coupler and are getting 12 inches, then yes, a 4 inch ballmount like part number # 2753 would be the best choice for your application. I have included a link to the instructions for the # 75153 hitch, as well as...
    view full answer...
  • General Towing Information for a 2004 Toyota Highlander V6
    A VIN is not required, just the year, make and model of a vehicle. Sometimes certain configurations need to be stated such as Hybrid engine, 4WD or sport packages. On some vehicles, spare tires need to be removed. The Draw-Tite hitch, part # 75153 does not require removal of the spare tire and yes it can still be accessed. The trailer wiring harness for tow package 2004 Highlanders is part # 118248. The port for the tow package vehicles is located behind the driver side cargo access panel...
    view full answer...
  • How Visible is Curt Class III Hitch Part # 13530 When Installed on 2008 Lexus RX350
    The Curt Class III Receiver, part # 13530 will be visible from the rear when installed like the 2007 model in the video you saw. The position of the receiver and cross bar is dictated by the location of the attachment points and the structure of the exhaust. Although they come from different manufacturers, the layout and structure of the Curt and Draw-Tite receivers are very similar. I will provide links below to the install instructions for both the Curt # 13530 and the Draw-Tite #...
    view full answer...
  • Recommended Receiver Hitch for 2007 Toyota Highlander Sport Non-Hybrid
    We currently offer two different hitches available for a 2007 Toyota Highlander Sport. The Curt Class III part # 13530 and Draw-Tite # 75153 would all be good choices. They offer a similar design and would install in the same manner. The Curt # 13530 is rated for weight distribution, with a 4000 lb GTW and a 400 lb TW rating, while the Draw-Tite model is not rated for weight distribution. In this instance, I would prefer the Curt model, due to the high gloss finish Curt uses, and also...
    view full answer...
  • Which Hitch Does Not Extend Past the Rear Bumper on a 2008 Lexus RX350
    We have a video installation of the Draw-Tite Class III Max-Frame Trailer Hitch, item # 75153, on a 2007 Lexus RX350, see link, that shows the distance from the center of the hitch pin hole to the farthest out part of the rear bumper at 1-1/2 inches, this leaves the receiver portion of the hitch out about 1/2 inch past the rear bumper. The Curt Class III Hitch, item # 13530, installs flush with the farthest out part of the rear bumper, so it would be the model that extends the least distance,...
    view full answer...
  • Trailer Hitch for a 2005 Toyota Highlander with a Japanese Bumper
    The Draw-Tite Class III 2 Inch Hitch, part # 75153, will not work with your Japanese rear bumper configuration. The installed hitch receiver sits pretty tight under the US bumper. The Curt hitch # 13530 will be in the same location. You might want to look into having a hitch fabricated for you.
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Written by:
Lindsey S
Employee Kathleen M
Video by:
Kathleen M
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.