bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 6000 lbs GTW
  6. No Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75662
lowest price pledge
Our Price: $108.17
You Save: $88.16
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 16 lbs
In Stock
Draw-Tite Trailer Hitch - 75662
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75662 can be ordered online at or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (172)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 75662

  • Class III
  • 2 Inch Hitch
  • 6000 lbs GTW
  • Draw-Tite
  • No Cross Tube
  • 600 lbs TW
  • 10000 lbs WD GTW
  • 1000 lbs WD TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 10,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 1,000 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

75662 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87530 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75662 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75662

Average Customer Rating:  4.9 out of 5 stars   (172 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Fast Shipping and installation was pretty easy.

2014 Ram 1500

As it turns out, I had the wrong hitch all along! This was an easy install and barely took 20 minutes to complete. The online video was extremely helpful. Now I just have to take it for a test run with the RV. Thanks for the speedy service!!

It’s still going strong! Its good to have the right connection setup. Since, I have towed other things than just the RV. Great product for sure. “
Martin - 02/06/2020

2011 Ram 1500

The installation was super easy, took about 20 minutes and the instruction video was extremely helpful. The hitch looks good and fits flush under the bumper. This hitch is going to work great for pulling my camper.


This product was a cinch to install. The instructional video was very accurate and informative and mentally prepared me for the installation. I own a 2011 Ram 1500. This drop hitch unit fit like a glove and only took 15 mins. to install. We immediately hooked up to our trailer and took it for a test drive. It stood the test on bumpy country roads and the highway. Thank you Drawtite and

One year and this hitch receiver is still as tight as it was the day I installed it.
Cliff K - 05/17/2021


As described. Great fit. Easy to follow instructions. Installed in less than 30 minutes. I would reccomend to others.

2006 Dodge Ram-Pickup

Hitch was excellent. Watched video then 30 minutes it was on truck. Very easy installation. Simple instructions. Recommendation is excellent.

2007 Dodge Ram Pickup

Installing the hitch on my 2007 Dodge Ram was a breeze. It only took about 30 minutes to install. Hers are some pics of the installation.

2021 Ram 1500 Classic

Install was straight forward and took just a few minutes. Hitch abd parts all there and in good condition.


I installed this hitch in 20 minutes it was the easiest accessory i have ever added. The hitch sits flush with the bumper unlike others i have installed which was an added bonus. Thanks for the workmanship and quality.


Let me say this, the HARDEST part of this purchase/install was waiting for it to get it to me!!! :-) From the moment I decided I wanted a receiver type hitch, to the moment I put my tools away, it was a breeze! I located etrailer and watched the video. It is nicely done, short and to the point. I then called etrailer and spoke with Jennifer S., she was a champ and very knowledgeable about etrailer's products, which is a rare trait now-a-days with online companies. Jennifer got me set up and my product ordered. Again it was simple, friendly and seamless time on the phone. Then the waiting... I used the two day shipping and they got it here on time :-) but the wait killed me!!!! Now for the install. My hitch arrived at 7:45pm and at 8:30pm I had the hitch installed and my tools put away!!! The install was just as described in the description and install video, all parts where in the box and the two "fish wires" worked like champs. While I watched the video, prior to ordering, I had some concerns about the bolts coming loose from the fish wires during the install, but they worked great!! I have nothing but good things to say about this product, Jennifer, ordering or installing. If you have Dodge that this hitch will fit, you need to get one!!!!

One year later, no problems. Ive pulled multiple size and different trailers without problems or incident.
Rusty D - 06/06/2017


I received my hitch neatly boxed inside a larger box without damage. Opened it up checked the hitch, looked to be built of good thick steel, didn't see on the website but hitch is made in Mexico. All hardware was bagged with instructions. The first thing I did was lower the spare tire, on my 09 Dodge the tools needed are located under the passengers side front seat. Then I tried to get hitch in place but bumper was bent up preventing It from getting into the proper position, used a pry bar, somewhat concerned how easy the bumper bent back down. Then lined up hitch installed hardware and tightened down. To hold the nut under the bumper I folded some cardboard to hold the nut in its groove before putting hitch under bumper. Installation time states 30 minutes, from start to finish it took me 27 minutes, including getting tools needed, lowering spare tire and bending down bumper. Actual hitch install took less than 15 minutes, very simple. 1/2" bolts take 3/4" socket for nut and 3/4" bolt takes a 1 1/8" socket.

Still satisfied with hitch. Ive pulled various trailers up to the 6k capacity rating without an issue. I did lose the rubber cover for the bolt head on the bumper, should have glued it down.
Edward D - 07/20/2017

Dodge Ram Pickup

Purchased a trailer hitch online for our 018 Dodge Ram 1500, ETrailer delivered the correct item on-time, installed it and has been doing what I purchased it for since then. Fairly easy to install per instructions. ETrailer provided exactly what I expected of them - "Great Customer Service". When a need arises I'll visit their site again.


I purchased this trailer hitch receiver about a year ago when I bought my Ram pickup. Installation was very easy. Done within 30 minutes. I pull a pop up camper and a 6x8 trailer that carries my canoe and kayak without any problems. I would highly recommend this product.

2018 Ram 1500

Great product, it only took me 30 minutes from start to finish. It looks great, works even better.

2015 Ram 1500

So far so good. I use a receiver hitch dirt bike rack all the time. Also use a 14' aluminum open trailer. Occasionally a large enclosed snowmobile trailer. Works great every time. Let me know if you have any questions.


No problems yet. Starting to show rust however.
Travis L - 06/05/2017

2019 Dodge Ram Pickup

I installed this on my 2019 Dodge Ram and had no issues. It has worked very well for me. I have ordered several other items from and they have all worked very well.

2017 Ram 1500

Product looks of good quality! It is not installed yet as there were not any guide wires in bolt kit. I don't think it was etrailers fault as box was taped up like it was ripped open. etrailers customer service is mailing out new guide wires. Will update later on ease of installing after I receive wires.

Great hitch
David k - 01/16/2019

2004 Dodge Ram Pickup

I ordered and received the Draw-Tite Max-Frame Trailer Hitch Receiver for my 2004 Dodge Ram 1500. I have purchased Draw-Tite hitches in the past and was always impressed by their quality. This purchase has proved to reinforce my impression of their quality. The installation video and instructions included with the kit enabled me to do a quick install of the hitch receiver. The wires with spring style ends allow the installer to quickly and accurately fish the mounting bolts through the mounting tubes underneath the truck. This design is ingenious and works exactly as designed. It took me 25 minutes to complete the entire installation. It went effortlessly. The hitch is a very high-quality unit which appears to be powder coated. The instructions and videos from etrailer were excellent. And even beyond that, the price was the most competitive I was able to find for this product. Shipping and delivery were also very quick. The hitch arrived on my doorstep within 2 days of order. I am a totally satisfied customer and would recommend etrailer 100% for the service, pricing and support they provide.

2014 Ram 1500

Product showed up and 25 minutes later I had it installed. Looks great, works even better and I couldn't be happier.

2017 Ram 1500

Arrived early, was a perfect fit and that spring/wire thing to put the bolt inside the tube is GENIUS

2019 Ram 1500 Classic

OK, this is a nice item. It is very well made (I'm a welder, so I know). This is an interesting product as it is a pretty easy install (more on that below), and it is relatively inexpensive. Now, it all depends on what you will be towing. I initially thought I'd go for a Class IV hitch, as they are rated for like 10,000 pounds, and my 2019 Ram 1500 5.7 L is rated to tow just under 9,000 pounds. Then I looked at prices and considering that my trailer fully loaded is unlikely to exceed 4,000 pounds, I went with this unit which is a Class III and increases my factory bumper hitch from 5,000 pounds to 6,000 pounds, giving me a nice margin over what I intend to tow. I used an Acura MDX to tow my trailer for like 19 years, and I finally just overdid it. At 215,000 miles, the MDX was going to need a lot of work if I were to continue using it as a tow vehicle. The weakest link actually is the tranny, and the cooling system really needs to be working at best capacity. Truth is, I make the MDX do more than it was really designed for. INSTALLATION. I watched the etrailer video and it was very helpful. Here are my tips, though that should make your installation go more easily. 1. This thing is pretty heavy and it has to be positioned just so to get the big bolt started - while you are trying to keep the nut in position AND start threading the bolt into the nut. I found using a floor jack under the hitch to hold it up against the bumper was very, very helpful. Now, if I just had a third arm..... 2. The written instructions say you don't have to drop the spare to do this. However, it's impossible to get a torque wrench with a socket onto the horizontal bolts on the front side of the existing tow-tube. I tightened with an open-end wrench, but will have to go back and hit it with a torque wrench after I lower (or remove) the spare. 3. This is the best tip! The "trickiest part of the installation is fishing the wires with the horizontal bolts and reinforcing plates 24 inches or so from the outer ends of the tube into the little holes that are almost at the center of the tube. And this is compounded because you are doing this blind. I'm a bit of a contractor and hot rodder, so I thought this through fairly quickly and came up with a great solution! They give you two fish wires that screw onto the ends of the bolts. First you attach one bolt and plate to one of the wires. Then you bend a small, about 3/4 inch, teardrop loop on the end of the wire. Then you take the other wire and bend a small teardrop loop on its end too. Next, you feed the wire without the bolt through the small hole in the tow-tube out to the open end of the tow tube. Then hook the two loops together and pull the wire with the bolt through the tube and out the small hole. This worked slicker than snot, if you know what I mean. Even in the vo\ideo they tell you that the hardest part of the job is fishing the bolts through the tow-tube. This trick made it the easiest part. The electricians reading will say something like "Duh!". That is all.

2010 Dodge Ram Pickup

Product is great. Only thing I would change is to run the pull wires from the anchoring holes first to the outside then attach the bolts. Make sure you run the wires through the holes in the product before you tighten the main bolt. Other than that it's a great pretty easy product

Its awesome. No problems and a great product Thank you
David J - 07/31/2018


It is a nice hitch. There some tricks to make installation easier. first, use two wood shims to hold the 3/4 nut in place while you work. next , on a Dodge the 1" x 2 1/8" ish pieces that the 1/2" bolts go through need to be cut down slightly and the ends need to be rounded a bit so that they actually fit through the crossmember tubes without getting stuck. Also, pushing an electricial snake from the 1/2" hitch mount holes out to the outer part of the crossmember then tapeing the supplied bolt pulling devices onto the snake makes the job easier. All in all it took about 1 1/4 hours. Not bad at all.


Directions were very clear and it was very easy to install. It took longer to find where the jack and accessories to lower the spare tire down than to install the hitch. It took 15 minutes to get the hold down bolt out because it was tightened so tight by the factory. Anyone could install this hitch. GREAT JOB E-trailer!!!


Super service and easy to install! Everything fit perfectly. The job took about 40 minutes from pulling in to the garage to pulling out of the garage. Lowering the spare tire made it easier to torque the bolts (just lower the tire, don't remove it from the truck) I would recommend this product and

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Installation of Draw-Tite Class III Trailer Hitch on a 2009 Dodge Ram
    The Draw-Tite # 75662 that you asked about mounts to the support beam behind the truck bumper. I've linked the installation instructions and an install video that might be helpful.
    view full answer...
  • Does 2-inch Class III Draw-Tite Hitch 75662 for Dodge Ram 1500 Include Mounting Hardware
    Yes, the mounting hardware required to install the 2-inch Class III Draw-Tite hitch # 75662 on your 2013 Ram 1500 is included with the hitch. This particular hitch is a fit for 1500s with the factory-installed step bumper and without a factory hitch. Please refer to the linked installation video showing a 2013 Ram. The install instructions are also linked and these will provide you with a list of the tools needed to complete the installation.
    view full answer...
  • Trailer Hitch Recommendation for 2017 Ram 1500
    For your 2017 Ram 1500 that does not have a factory trailer hitch the Draw Tite trailer hitch part # 75662 is a confirmed fit and has a towing capacity of 600 lb tongue weight and 6,000 lbs total trailer weight. This bolts below the rear bumper/frame like you mentioned. I attached an install video for this hitch as well.
    view full answer...
    Image 1 for
  • Will Draw-Tite Trailer Hitch Fit 2018 Ram 1500 With Dual Exhaust?
    So long as your 2018 Ram 1500 with a dual exhaust has the factory-installed step bumper, you can use the Draw-Tite Max-Frame Trailer Hitch Receiver # 75662. If you take a look at the accompanying photo you can see the hitch on a Ram with dual exhaust that has the step bumper. I have also added a link below to a video install on an '18 Ram 1500 for you to check out of the Draw-Tite Trailer Hitch Receiver # 75662.
    view full answer...
    Image 1 for
  • Trailer Hitch Fit Recommendation for 2006 Dodge Ram 3500 without Factory Hitch
    We have the Draw Tite hitch part # 75662 which is a confirmed fit for your 2006 Dodge Ram 3500 without the factory trailer hitch. And since it installs by attaching at the center of the rear of the vehicle your suspension setup would not interfere.
    view full answer...
    Image 1 for
  • 2 inch Trailer Hitch Recommendation for 2017 Ram 1500
    For a 2 inch trailer hitch that is confirmed as a fit for your 2017 Ram 1500 we have the Draw Tite hitch part # 75662 which is a confirmed fit. This hitch installs really easy as well. Check out the install video I attached for more info as well.
    view full answer...
  • Trailer Hitch Fit Recommendation for 2017 Ram 1500 Tradesman
    For a 2017 Ram 1500 Tradesman the Draw Tite hitch you'd need similar to the one you referenced is the part # 75662 which is a confirmed fit. The # 75135 you referenced is for older trucks. I attached an install video for this hitch for you to check out as well.
    view full answer...
    Image 1 for
  • Head Size of Bolt for the Black Rubber Bolt Cover Part # 58530
    The Black Rubber Bolt Cover part # 58530 is specifically designed for the 3/4"-10 x 3-1/2" grade 5 bolt included with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75662. I cannot confirm it will fit any other application. However, the head size of the bolt is 1-1/8" which is standard for all grade 5 bolts of this size.
    view full answer...
  • Trailer Hitch Fit for 2017 Ram 1500 without Factory Hitch
    For your 2017 Ram 1500 without a factory hitch we have a very similar hitch that is a fit, but the one you referenced is for older Ram trucks. Instead you would want the part # 75662 which is confirmed as a fit. I attached an install video for you to check out as well.
    view full answer...
    Image 1 for
  • Does the Draw Tite Hitch 75662 Come with Black Rubber Bolt Cover
    The Draw Tite hitch part # 75662 does not come with the black rubber bolt cover part # 58530 that you referenced. You would need to order that separately.
    view full answer...
  • Recommended Trailer Hitch for 2015 Ram 1500 without Factory Hitch
    The trailer hitches available that are confirmed to fit your 2015 Ram 1500 are not the exact model that would have come on the truck from the factory, but they will install the same way and provide similar if not better capacities. Choosing the Class rating for the trailer hitch on your Ram will simply depend on the weight of the items you plan on towing. The Draw-Tite Class III Trailer Hitch Receiver # 75662, which is confirmed to fit your vehicle as long as it does not have the factory...
    view full answer...
  • Can Trailer Hitch from 2005 Dodge Ram Be Installed on 2016 Ram 1500
    Unless the hitch from the 2005 Dodge Ram 1500 is the # 75662 that mounts to the pre-existing crossmember/beam as shown in the provided diagram it won't fit. The 2005 Dodge Ram and the 2016 Ram 1500 have no other hitch fits in common.
    view full answer...
    Image 1 for
  • Replacement Bolt Cover for Draw Tite Trailer Hitch 75662
    The replacement rubber bolt cover you'd want for the hitch part # 75662 is the part # 58530.
    view full answer...
  • Replacement Hardware for Draw-Tite Max-Frame Trailer Hitch Receiver 75662
    While we do have a full replacement hardware kit for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75662, just a single bolt is not available. The best we can offer for you is the full hardware for the hitch with the Replacement Hardware Kit for Trailer Hitches # RHK. If you go this route you can get the correct kit by inserting "75662" in the Hitch Item Number box on the product page, and selecting "Draw-Tite" from the Manufacturer drop-down box. I have added links below to a video...
    view full answer...
  • Recommended Trailer Hitch for 2003 Dodge Ram 1500 SLT
    We do not have any trailer hitch receivers that mount behind the license plate on your 2003 Dodge Ram 1500 SLT, but we do have a couple that bolt directly underneath it attached to your bumper. We have the Draw-Tite Max-Frame Trailer Hitch Receiver # 75135 for vehicles built before November 1, 2002 and # 75151 for vehicle built after November 1, 2002. There was a switch to the fit in this model year. I've attached a photo of the dimensions of the # 75135 so you can reference the installation...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2008 Dodge Ram 1500 SXT
    The Curt hitch # 14070 that you referenced fits 3500 and up Ram trucks that are cab and chassis models not like your 2008 Dodge Ram 1500. You'd need a Draw Tite hitch like part # 41929 if you have the factory hitch or part # 75662 for if you don't have a factory hitch.
    view full answer...
  • Recommended Trailer Hitch for a New Body Style 2019 Ram 1500
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75662 is only a fit for the 2019 Ram 1500 Classic without a factory trailer hitch which is the old body style (fourth generation). The photo you attached shows a factory trailer hitch on what I believe to be the 2019 Ram 1500 new body style (fifth generation). On the new body style there are two different trailer hitches, one that has a 2" receiver tube opening below the bumper and one that has a cutout for a hitch ball in the bumper....
    view full answer...
    Image 1 for
  • Differences Between etrailer e98852 and Draw-Tite 75662 Class III Hitches for 2019 Ram 1500 Classic
    The etrailer brand # e98852 and the Draw-Tite # 75662 are almost identical. The capacities are the same, they'd both install in the same manner and they're very similarly priced. There are a few differences. The biggest difference is that the etrailer # e98852 hitch itself is manufactured in the USA, while the the Draw-Tite model is manufactured in Mexico. Other more minor differences- the etrailer hitch uses a matte powder coat finish, while the Draw-Tite coating is a bit more glossy....
    view full answer...
  • What Size Bumper Bolt for Trailer Hitch on a 2015 Ram 1500
    I'm not sure what trailer hitch you have installed on your 2015 Ram 1500 but the Trailer Hitch # e98852 uses a 3/4-10 x 3.25 bolt while the Draw-Tite version # 75662 uses a 3/4-10 x 3.5 bolt. This means that you need a 3/4-10 with at least a 3.25 length. I have attached installation videos for both that you can check out. If you have a different trailer hitch that we carry just let me know and I can help you find out what exact bolt you need.
    view full answer...
  • Recommended Trailer Hitch for Towing a Car Hauler with a 2011 Dodge Ram 1500
    Between the trailer and the vehicle, you'll likely be towing a load just shy of 6000 lbs. The Draw-Tite Class III hitch you referenced, part # 75662 has a capacity of 6000 lbs towing/ 600 lbs tongue weight, so the load you're carrying might be too much for that particular hitch. I'd recommend confirming the combined weight of the Corvette and the car transporter. If it's under 6000 lbs, the # 75662 would be a good choice. If it's over that amount, I'd recommend a higher capacity hitch like...
    view full answer...
  • Will Installing a Trailer Hitch Void the Warranty on a 2011 Dodge Ram 1500
    Installing a trailer hitch like the Draw-Tite hitch, # 75662, will not void your warranty on your 2011 Dodge Ram 1500. Consumers of aftermarket products are protected by the Federal Magnusson - Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the prob­lem in question. You do not have to take the truck and hitch...
    view full answer...
  • 2016 Ram 1500 Trailer Hitch Recommendation
    For your 2016 Ram 1500 that does not have a factory hitch the Draw Tite hitch part # 75662 has been confirmed as a fit and would be a great option. I attached an install video for you to check out as well. For a ball mount kit you would want the part # EBMK4 that comes with a 1-7/8 inch and 2 inch hitch ball. And then if you need trailer wiring as well part # 119190KIT.
    view full answer...
  • Recommended Trailer Hitch And Trailer Wiring For 2004 Dodge Ram 1500
    The Draw-Tite # 75662 is a confirmed fit for your 2004 Ram pickup. This is a Class lll trailer hitch and it has a 2-inch receiver opening. This trailer hitch has a towing capacity of 6,000-lbs but you will need to check your owner's manual to make sure you do not exceed the towing capacity for your truck. Since you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2010 Dodge Ram 1500
    Curt Manufacturing offers a few different high quality, made in America hitches for your 2010 Dodge Ram 1500. The right hitch for you will depend on what you'll be towing and how much it weighs. If a 6000 lb towing/ 600 lb tongue weight (maximum amount of weight that can safely be suspended from the hitch) will work for you, you can't go wrong with the Curt Class III hitch, part # 13333. For a higher capacity, 10000 lbs towing/1000 lbs tongue weight, go with the Curt Class IV, part #...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Patrick B
Video by:
Patrick B
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-833-496-1390