bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75774
Retail:$446.84
Our Price: $305.77
You Save: $141.07
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 47 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75774 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (165)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 75774

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Visible Cross Tube
  • Draw-Tite
  • 600 lbs TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin, and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
    • Maximum tongue weight: 600 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75774 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87636 Hidden Hitch Class 3 Trailer Hitch Receiver

Replaces 75698 Draw-Tite Class 3 Trailer Hitch Receiver

Installation Details 75774 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75774

Average Customer Rating:  4.7 out of 5 stars   (165 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

I installed this hitch bar in my MB GLK350 about a year ago and I am amazed of this product. First off the installation was very easy. Everything was map and cut perfectly to the specs of my car. I have used the hitch to tow a double seadoo trailer without any issues. Every sturdy metal bar. I would recommend this hitch bar to anyone

Tony

8/23/2023

Perfect, not even a bit of rust or damage, well painted and strong metal. No complaints thus far.



by:

Product appears to be perfect; however, not yet installed. Prior eTrailer hitch (DrawTite) for our Toyota Highlander worked out quite well, so I didn’t have any apprehensions about ordering again. I do wish the packing had been safer. The box arrived highly damaged, and there was only some loose kraft paper inside to “cushion” and restrain the hitch. I was concerned that the contents might have been compromised and/or shorted with the hitch bouncing around inside the box (it contained several parts of the order), but all was OK.



by:

Good hitch frame and fits my 2013 Mercedes GLK350 4Matic well. Contents included the frame trailer Hitch, the metal plates, screw, bolts and nuts.

Due to an issue where I realized while towing that one nut and bolt was somehow missing I would recommend that you make sure whoever installs this substitutes the original nuts for locknuts or usw loctite on thw bolts to keep the nuts from loosening during driving potentially vibration.

Etrailer Expert

Jenny N.

6/23/2022

The hitch hardware is typically stored in the hitch receiver when it is shipped. I recommend making sure that the nuts are torqued down according to the manual recommendations. It is a good idea to check periodically that the hardware remains tight.



by:
2015 Mercedes-Benz GLK-Class

Great product. Best if car is lifted on ramps or Jack-stands for do-it-yourself installation.
Also note it’s a tight fit to get a large torque wrench on bolts. May need to rent other style (smaller) torque wrench to add installation.



by:

I have been completely satisfied with this hitch receiver. Works perfectly with my platform bike rack that can carry 2x 65 lb eBikes.



by:

I have not open the box but it’s all broken not sure if this is complete

Etrailer Expert

Jenny N.

2/22/2024

Oh my goodness! I will have our Customer Service team reach out. If there is anything damaged or missing we can replace it for you.



by:

Solid hitch, easy to install. My 18 yr old step-son did it in 28 mins. (would have been less time if his father wasn't under there with him). Very good quality - will order again from etrailer in the future.

Michele N.

3/24/2015

Very good - use it a lot never had a problem.



by:
Mercedes-Benz

I bought this product last year and it was very easy to install on my 2013 Mercedes GLK. I'm not a handyman but this is one of the do it yourself projects I can say the easiest. The part fits perfectly and after a year it still looks brand new from underneath. Used it to carry my bike rack for 2 bikes.



by:

Towing hitch for 2012 Mercedes GLK 4Matic

Quality
product, easy to follow instructions, finished installation looks factory
Would recommend product and etrailer really pleased.

Thanks

John S.

10/20/2020

Zero Issues, I did a re-torque just to be proactive. Drove from MI to SC and back with cargo carrier installed no problem...Would still give it 5 Stars



by:
Mercedes-Benz

Outstanding experience with etrailer! Researching and navigating the site was a breeze, the price was excellent, and the product arrived much sooner than I expected. All the components were
present, and looked brand new. Installation of the hitch onto my Mercedes GLK 350 was incredibly easy; there was also an outstanding video that details step by step installation instructions. (Not sure it was an etrailer production, but invaluable just the same.) The only recommendation I can think of is to suggest to customers to consider purchasing a wiring kit for tail light operations at the time of initial purchase. Hands down would recommend etrailer to anyone looking for equipment.



by:
2012 Mercedes-Benz GLK-Class

Ordering process was easy, and my hitch arrived within 3 days, even though I didn't pay extra to have it shipped faster. Very sturdy, looks great, and easy to install. I didn't install any wiring harnesses because we only use our hitch receiver to attach a bike carrier.

Read the included instructions and watch the online video before installing. I installed my hitch by myself without an extra set of hands. Extra hands would have made it easier, but it's not bad by yourself. The video suggests attaching the front mount first, then raising the rear into position. I found it easier to do the opposite - attach the rear first, then raise the front into position. Final torquing of the nuts and bolt was a little challenging, especially the rear mounts, as the exhaust hanger brackets don't leave much room for your torque wrench.



by:

So satisfied with this product I have to give it a perfect 5-star review. True to their promise, I didn't have to drill, cut, break or bend anything on my 2013 GLK 350. On their video, they have to put the vehicle on a lift to install the trailer hitch receiver. I did the installing in my garage. I used my GLK's own jack to lift it up in place, squeezed underneath the vehicle and line up the bolts through the holes. It was a pretty tight fit but I managed to do it with ease. I didn't have anyone help me but a little bit of patience is all it takes.



by:
2015 Mercedes-Benz GLK-Class

I ordered this hitch for my 2015 GLK350 and I was able to easily install it on my own with minimal tools. The available installation videos are succinct and exactly what one needs to get the job done. Using the provided hardware and connection points on my vehicle, there was zero drilling. I added a branded hitch cover and it looks like it belongs on my car.



by:
2015 Mercedes-Benz GLK-Class

Follow the instructions and this is easy to install. I did it myself using a jack to support the hitch under the vehicle. Make sure you have a torque wrench and a 3/4 socket that is not too long. the bolts require 75 ft/lbs of torque which is not a small amount.

Picture with bike rack installed.



by:

Hitch showed up on time, as promised. Fairly simple install, just read the instructions, no holes drilled. I chose this hitch from Draw-Tite because of the poor reviews of the one from Curt. etrailer was very helpful and courteous when I called about a question regarding my order.



by:

Installation was simple. etrailer's video was very helpful.



by:

Exactly what I needed. I shopped the usual online places, but then saw the etrailer.com videos. I would’ve bought a lot of frustration, but the etrailer recommended receiver & video worked great. If you don’t have an oil change pit, or car lift (like me), you can do the install from the floor (if you can slide under a GLK :-)) And you can do it by yourself if you follow the advice to tape the bolt heads.



by:

The hitch fits nicely, however, it's more of an hour job of installation. It takes some time to align everything and lift the hitch up with a jack. A second person to give you a hand would definitely speed things up.
Also, I was not able to torque all bolts exactly to spec due to the tight space. Planning on applying torque seal to the nuts to monitor any loosening.
Shipping was very fast!



by:

Product was as expected. Installation was straightforward and the product has performed repeatedly without any issues. I am very happy with this purchase.



by:

Product is exactly as described and fit perfectly! The customer support was incredible. Just after ordering, I received a personalized email from the shipping team at etrailer describing when I could expect the shipment to happen and if I had any questions. Throughout the remainder of the process, I received another two or three personalized emails giving status updates and following up to make sure I was happy with the product and to see if I had any questions once they saw it had been delivered. By far the best online ordering experience I have ever had... I wish more companies could be like etrailer or that etrailer would expand their product offering to include things I needed to purchase more often. I have and will continue to recommend etrailer to friends and family. You cannot go wrong!!!



by:

Great instructions, easy to install, you just need a 3/4” socket and 75 ft-lb torque wrench, use your car jack to lift up the hitch, bolt it down. Took over an hour by myself!



by:

The hitch is stronger than the GLK 350! This piece is very robust and has a triangulated mounting setup that makes this setup stronger than the SUV itself. I have been towing a 3500lb Airstream, motorcycle trailers, and some other items all over and I honestly believe I am starting to tear my subframe bushings.
This is not a downside of this hitch but a pro. It is so robust and I use this SUV so hard that the vehicle may not be liking the abuse.
The only comment to be aware of with this hitch is that the powder coat can chip and if so the steel will rust underneath. This is not unique to this hitch but be careful with sharp objects.



by:

Straightforward installation. Secure. highly functional.



by:
2014 Mercedes-Benz GLK-Class

Took a little longer to install than I thought (center two pieces were the challenge with only one person) but the hitch fit perfectly! Foll the instructions....it makes sense to install the single stabilizer piece first, then the pieces at the bumper. It looks good, is solid, and I believe will easily haul our bicycles. The photos on the instructions were a bit dark so they weren't very helpful but the overall diagram was very good.



by:

Quality product and service, straightforward insulation with no alignment issues.
Takes a few hours without help and with a vehicle that’s needs to be wired.


25
168
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Trailer Hitch for 2014 Mercedes GLK350 with Higher than 3,500 lb Towing Capacity
    The Draw Tite hitch part # 75774 that fits your 2014 Mercedes GLK350 has a towing capacity of 4,000 lb so it would easily fit the requirement mentioned that the rental place required.
    view full answer...
  • Does Rear Bumper of 2012 Mercedes GLK Class 4-Matic Need to Come of to Install Hitch
    When we installed the Draw Tite Hitch part # 75774 in a 2012 Mercedes GLK Class 4Matic we had to trim the bumper tabs but the bumper did not have to be removed. Check out the install video I attached that shows this hitch installed on a 2012 GLK just like yours.
    view full answer...
  • Does 2014 Mercedes-Benz GLK-Class with Draw Tite Hitch Have Capacity for 1,900 lb Boat
    The Draw Tite hitch part # 75774 has a trailer towing capacity of 4,000 lbs so it would easily be able to handle the weight of your 1,900 lb boat trailer. I looked online and your 2014 Mercedes-Benz GLK-Class has a towing capacity of 3,500 lb so the vehicle would be good as well.
    view full answer...
  • What is Trailer Towing Capacity of Draw Tite Hitch that Fits 2015 Mercedes GLK
    The Draw Tite hitch part # 75774 you referenced that fits a 2015 Mercedes GLK can to a trailer that weighs up to 4,000 lbs so as long as the boat and trailer weigh less than that it would work great.
    view full answer...
  • Trailer Hitch Receiver for a 2015 Mercedes-Benz GLK 350
    For the 2015 Mercedes-Benz GLK350. I recommend the Draw Tite Class III, part # 75774. This is an extremely simple, no drill installation that bolts to the frame of the vehicle. I've included a video of our install team putting the hitch onto a 2014 Mercedes-Benz GLK 350 so you can get an idea of the process. I've also included our trailer hitch installation guide so you can pick up a few extra tips to make the installation as easy as possible. Since you have a Class III, you can use a...
    view full answer...
  • What is Included in the Replacement Hardware Kit for Trailer Hitches
    Yes, when you order the Replacement Hardware Kit for Trailer Hitches # RHK and input Draw-Tite and 75774 in the selection boxes then you will get everything that comes in the hardware kit for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75774. Which would include the clamp brackets.
    view full answer...
    Image 1 for
  • Where to Have Hidden Hitch Trailer Hitch # 87636 Installed
    The Draw-Tite Max-Frame Trailer Hitch # 75774 will fit your 2013 Mercedes-Benz GLK 350, however, our installation center is located in Wentzville, Missouri. Most automobile, RV and trailer repair centers should be able to install this hitch for you, however, you will have to contact your local repair shop for these rates. The instructions are attached so you can also take these to the shop of your choice to assist in determining a rate. Current pricing is listed on the product page.
    view full answer...
  • Replacement Spacer Blocks for Draw-Tite Max-Frame Trailer Hitch Receiver 75774
    There are two different spacer blocks that come with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75774, per the instructions they are 5/8” X 1-1/2” X 2” and 1/4” X 1-1/2” X 2”. That said, they do not specificy a thickness although we do offer these plates but you would have to purchase a hardware kit which has them, the Replacement Hardware Kit for Trailer Hitches part # RHK.
    view full answer...
  • Is Vehicle Modification Required to Install Trailer Hitch on 2013 Mercedes-Benz GLK350
    Installing the Draw-Tite Class III Max Frame Receiver Hitch # 75774 on your 2013 Mercedes-Benz GLK350 does not require any type of modification to the vehicle. This hitch will line right up to existing holes in the vehicle's frame for a simple bolt-on (no-drill) installation. I have attached an installation video on the 2014 model GLK-Class that you can use for reference. The process should be just about identical for your 2013 model. The written instructions are also attached.
    view full answer...
  • Class III Trailer Hitch for 2013 Mercedes-Benz GLK-350
    The 2-inch hitch I recommend for your 2013 Mercedes-Benz GLK-350 is the Draw-Tite # 75774 which includes hardware for its no-drill installation. This is the highest-capacity option. A video is linked for your reference. This hitch has a rating of 600-lbs of tongue weight (TW) which is the downward force on the hitch from what is connected to it. This capacity is plenty for your 350-lb total chair and carrier weight but as you noted ground clearance can become an issue when entering steep...
    view full answer...
  • Choosing a Ball Mount for 2011 Mercedes GLK 350 With Draw Tite Hitch
    In order to choose the right 2-ball mount for your 2011 Mercedes GLK 350, there are two measurements you'll need to know. The first one you already have, which is the 13-1/2 inches from the ground to the top of your receiver. Next, you'll just need to measure from the ground to the bottom of your coupler. If the height of your hitch receiver is higher, you'll need a mount with that amount of drop; if your coupler's height is greater, you will need a ball mount with that amount of rise....
    view full answer...
    Image 1 for
  • Availability of Install Video for Hitch that Fits 2013 Mercedes GLK350
    For your 2013 Mercedes GLK350 we only have install videos for the Draw Tite hitch part # 75774 and not the Curt you referenced part # C13177. I did attach a link to a set of detailed instructions for the Curt hitch for you to check out though.
    view full answer...
  • Trailer Hitch Comparison for 2014 Mercedes GLK 350, Curt or Draw Tite
    For your 2014 Mercedes GLK 350 I would highly recommend the Draw Tite hitch part # 75774. It has higher capacities and will install in about half the time when compared to the Curt so it would be the best option. No reinforcing would be required either.
    view full answer...
  • Trailer Hitch and Wiring Harness Availability for a 2014 Mercedes-Benz GLK350
    The trailer hitch that I recommend for your 2014 Mercedes-Benz GLK 350 is the Draw-Tite Class III Hitch, # 75774. This hitch has a high tongue weight and towing capacity for your vehicle and there is no drilling required to install the hitch. Keep in mind, your towing capacity will be limited to the lowest rated component whether it is the trailer hitch or vehicle, so I recommend checking your owners manual or with a local Mercedes dealer to verify the towing capacity of your GLK 350....
    view full answer...
  • Easier to Install Trailer Hitch Recommendation for 2012 Mercedes GLK350
    You basically have two options for a trailer hitch for your 2012 Mercedes GLK 350. The easy to install and slightly more expensive Draw Tite part # 75774, or the slightly cheaper but much more difficult to install Curt # C13142. For the marginal cost difference and the much easier install I would go with the Draw Tite part # 75774. Which the price of this is right on par with what most hitches cost. To get some perspective you might check out the cost of the Mercedes hitch for your vehicle...
    view full answer...
    Image 1 for
  • Why Can't Class III Hitch Installed on 2015 Mercedes-Benz GLK 350 Use Weight Distibution
    When a hitch isn't rated for weight distribution, it's typically because the vehicle manufacturer has stated that weight distribution shouldn't be used on that particular vehicle. This is commonly seen on unibody-type vehicle where the portion of the vehicle where the hitch attaches might not be strong enough to withstand the forces exerted on the vehicle by a weight distribution system. This being said, you can still use a sway control system like the Curt # 17200 friction sway control....
    view full answer...
  • Can Weight Distribution System Be Used with 2015 Mercedez-Benz GLK-Class
    I may have a solution for you, however there isn't a trailer hitch available for your 2015 Mercedez-Benz GLK-Class that is rated for use with a weight distribution system. When this happens it typically has just as much to do with the vehicle than with the hitch itself, as trailer hitch manufacturers try to line up hitch specs and restrictions with the vehicles they are designed to fit. Most likely the rear of your Mercedes simply can't handle the type of tension/force that a weight distribution...
    view full answer...
  • Installing a Trailer Wiring Harness on a 2010 Mercedes-Benz GLK350 AWD
    We have not had a chance to install a wiring harness on a Mercedes-Benz GLK350 yet, but I know some vehicles will require a reflash for a trailer wiring harness to work. Installing a trailer wiring harness on these vehicles without going through the proper installation process can throw dash codes or mess with the vehicles electrical system. For a wiring harness that will not require you to splice or cut into your GLK350's taillight wiring system, I recommend the ZCI Zero-Contact Wiring...
    view full answer...
  • Will Curt # C13142 Fit a 2013 Mercedes-Benz GLK Series With the New Bumper
    My technical contact at Curt told me that hitch receiver # C13142 will fit your 2013 Mercedes-Benz GLK providing it it a 350 model and is a standard stock model. They do not have a fit for the special edition GLK models that Mercedes-Benz produces. This hitch will not fit the GLK250 diesel series. One point of consideration is that Curt requires the use of stabilization strap # 18050 if you are planning on carrying either a bike rack or cargo carrier. The other hitch option for your vehicle...
    view full answer...
  • Hitch, Wiring and Related Items for 2014 Mercedes-Benz GLK 350
    You identified one of the available 2-inch Class III trailer hitch receivers offered for your 2014 Mercedes-Benz GLK 350, part # 75774 from Draw-Tite. Of the three available options this is the hitch I suggest based on its capacity and lower price. I have linked the written installation instructions along with two helpful articles on hitch installation. With this I suggest the etrailer Ball Mount Kit # 989900 since it includes two ball mounts with varying rise/drop as well as both 1-7/8-...
    view full answer...
  • Why Can't Trailer Hitches for 2013 Mercedes GLK Class be Used with Weight Distribution
    Usually when a Class III hitch or higher is not rated for weight distribution it is because the vehicle prohibits it. But I checked the owner's manual online for the 2013 Mercedes GLK and did not see anything about it. the bottom line is trailer hitch # 75774 was not designed, tested, or rated for use with weight distribution so you would not want to use it. I have linked a video showing an example installation of this hitch for you. I also recommend etrailer ball mount kit # 989900. It...
    view full answer...
  • Trailer Hitch & Wiring For 2010 Mercedes-Benz GLK
    To tow a trailer with your 2010 Mercedes-Benz GLK, you'll need a hitch, trailer wiring, and a ball mount. I'll go ahead and list out exactly what you'll need so you can get towing: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75774 - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 - Ball Mount Kit for 2" Hitches # 989900
    view full answer...
  • Hitch and Bike Rack Recommendation for 2013 Mercedes GLK350
    For your 2013 Mercedes GLK350 the best hitch option is the Draw Tite part # 75774 as it will give you the most concealed look. For a bike rack I really like the Hollywood Racks Destination Bike Rack # HLY94FR. This is a platform bike rack that only weighs 20 lbs. The biggest drawback to platform bike racks has always been the weight of them, but with this rack you get the best of both worlds. The preferred attachment style with the lighter weight.
    view full answer...
  • Trailer Hitch Recommendation for a Bike Carrier on a 2011 Mercedes GLK350
    For your 2011 Mercedes GLK350 the Draw-Tite hitch # 75774 and discontinued Hidden Hitch model 87636 are going to be identical (except for the name). The installation of these 2 hitches takes less time and thus installation is easier than the Curt hitch # C13142 which uses different attachment points on the vehicle. Based on the options I recommend trailer hitch #75774 which also happens to be the most popular option for GLK350 owners. I have linked the installation instructions for you. This...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Chris R
Video by:
Chris R
Employee Jacob T
Video Edited:
Jacob T
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B
Employee Jared G
Test Fit:
Jared G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.