bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4000
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Our Price: $166.67
You Save: $63.23
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 29 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded Acura RDX trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75784 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (437)
  • Q & A (0)
  • Photos

2013 Acura RDX - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • Class III
  • 2 Inch Hitch
  • 4000
  • Concealed Cross Tube
  • Draw-Tite
  • 400
  • Custom Fit Hitch

Fully welded Acura RDX trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
    • Maximum tongue weight: 400 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

75784 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87642 Hidden Hitch Class 3 Trailer Hitch Receiver

Item # 75784

Installation Details 75784 Installation instructions

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75784

Average Customer Rating:  4.9 out of 5 stars   (437 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Solid hitch. It is well built and easy to handle. Only issue I had was the packaging. First of all, this shipment did not come from etrailer guys directly. When I placed my order, their awesome customer service contacted me within 20 minutes letting me know that they are out of stock and the next batch of hitches are delayed by the vendor. I was offered to switch to Curt hitch. They are great too but I did not go with that option. 1) They are more expensive (maybe 15 bucks more) 2) They require a safety strap with bike racks and I do not want to hook anything to my car. The curt however has higher tongue weight. I am not planning on towing anything (well for now). My sole reason for this hitch is hooking up my bike rack. I have a Kuat Transfer 2 and it is a great rack
The hitch was wrapped in a paper to protect it from getting scrathsed. However there were no bubble wraps anything like that. The hitch was sticking out of the shipping package. It was scratched in multiple places. No big deal. I mean it would be nice to get a scratch free one, but realize this that the hitch will be underneath the car and it will get hit by rocks and so on. My only issue is that I live in Minnesota and winters require tons of salting, so we get rust a lot.

My fix to address this issue was to purchase a can of Rustleuom primer and paint. I double coated all of the scratches and it was dried to touch in 2 hours and fully cured in 24.

So now let's get to the installation. This was super easy. Do not pay someone to do it. Have someone help you. It makes it super easy. We had the hitch installed in 5 minutes. No lift of jacking required. I was also thinking of getting car ramps but it slides in pretty easy. With two people you can lie down and slip into position and then screw the bolts. I think with one person you can lift it up and put in on a box or pile of boards and then screw each side. I'd suggest taking care of the handled nuts first. Bend and shape them and then place them in the holes. With this once you are underneath, you can screw the bolts to the welded nuts and then move to the last two bolts, then you dont have to get up and fix the handled ones while the hitch is dangling.

Just beware, then welded nuts need to be clean or otherwise it would not screw that well. As mentioned, I live in Minnesota. It took us 30 to 40 minutes of spraying WD-40 and brushing the holes. It was painful. There was so much rust you cant even believe it. We could not screw past 1 turn. So the hitch itself is easy. Other things might cause complications.

I rented a torque wrench from Autozone and it turned out to be out of spec. So we drove there and got another one. Just FYI, 115lbs of torque is tons pressure. You need to put a lot of muscle into it to get it to that point. Do not feel like you are over-tightening it. It will click at one point. We felt like that we are not doing it right. I found a Discount Tire right by the Autozone store and the staff there torqued to spec for us free of charge. The technician was amazed on how much 115lbs torque was. He kept turning and twisting and not hearing a click. It was kind of funny but we got it done. It looks great and sturdy

Keyvan P.


It is a great hitch and works well. I had to paint it when I received since there were some scratches on it. I live in MN and we get a lot of salt on road and rust is a major issue. Unfortunately I backed into a small stone step behind my garage which scrapped the side of the hitch. It actually held up well and crushed the stone. Only issue is the pain got scrapped off. It happened in November and it was too cold to paint it. Now it is a bit rusty, mostly superficial. I need to scrap the rust and repaint it

2016 Acura RDX

We ordered this hitch to install on our New 2016 Acura RDX so that we can haul our road bikes when traveling. The dealership wanted an incredible amount to install the Acura hitch. The product is excellent and fits perfectly to the predrilled wholes in the frame of the Acura. My wife helped me hold up one end while I held the other and place the bolts and tightened them. It took less than 30 minutes and saved me $500 that the dealership would have charged on top of the what I paid I did not install the wiring harness as I don't expect to pull trailers with this vehicle. The Draw-Tite hitch is also a heavier duty hitch compared to the hitch from the Acura dealership. I was also very happy with the service from We have had the hitch on the car for about 1.5 years and it still looks good and no rust.

John E.


The hitch has done well. We only use it for bikes. I probably should get the wire harness sometime in case we pull a small trailer. Thanks


Hitch arrived very quickly. It was well secured in a sturdy box with all of the needed parts included. The instructions were easy to follow and I was able to install the hitch with my son in about 30 minutes. We were able to install without any type of lift.
Besides the etrailer video on the hitch I would suggest you also watch the draw tite Utube installation video as it shows a couple of extra hints that came in very helpful. One thing to be sure to do is pop the two plastic fasters that hold the back rear shroud to its makes installation so much easier. All in all the product looks like it is very well built, is easy to install and looks great! I would easily recommend.

Fred B.


I still love my trailer hitch after a year. I use it primarily with my multi bike rack but have also used it for pulling a small trailer. I couldnt be more pleased with its performance. Thanks!

2014 Acura RDX

I bought this hitch to haul two bikes on my 2014 Acura RDX via a hitch rack. The hitch seems extremely well built and designed. However, my installation took a bit longer than most folks - probably 50 minutes or so. My riding buddy got the passenger side installed fairly quickly, but then we couldn’t quite get the driver side bolts in. It seemed like the bumper bracket interfered a bit. But we finally got it installed and it looks great with the cover installed.



Outstanding hitch rack - well-built and simple usage!


I purchased the hitch primarily to use with a bicycle rack. The box in which it was delivered was a little messed up but the hitch was perfectly fine. I was able to install the hitch myself without having to put my car in a lift. It was a little awkward as there wasn’t too much room to maneuver. The video provided by etrailer made the install extremely straight forward and took about 45 min. The hitch feels very solid and looks pretty nice.

K C.


So after a year I’m still very happy with my purchase. It was a good buy. etrailer is great, definitely recommend them.

2014 Acura RDX

I love this website.
They answered all my questions with all the details. Hitch it's really high quality and perfectly fit with the car. Set up pretty straight forward nothing complicated. It took me and my 14 year old daugther about 45 minutes to install it. Looks great on the car. It's doesn't look too extractive and work great with THULE rack.

Jiratt P.


Still no issue. I used a lot last summer to carry four bike. Perfectly fine.

Acura RDX

Great Hitch receiver, fit perfectly on my Acura RDX. Easily installed by local RV center. Saved a bundle over there price. I use it mainly for my E-bike rack. Perfect!

Gordon G.


I use the hitch receiver on a weekly basis. Never a problem. This is a great product and great service from eTrailer

2017 Acura RDX

After getting a quote from Acura for more than $[XXX] to install a trailer hitch onto my 2017 RDX, I saw what eTrailer had to offer. $[XXX] with free shipping for a custom-fit hitch for my exact vehicle. In addition, they had an excellent video selection guide to help me to choose from the two hitches they offer PLUS an installation video of them installing it on my exact vehicle. I purchased this with 100% confidence that it would fit my car and install beautifully. Package arrived in 3 days with extremely detailed tracking. I installed the hitch without a "hitch". Perfect experience from start to finish.


I wanted this for an E bike rack. My independent auto repair shop told me to get this one and they installed for me. Total cost was $[xxx] compared to $[xxx] from Acura dealer. It was easy for them to install.




2016 Acura RDX

The hitch is well made, what I did not like was the damaged E-coat. the hitch has been dropped a couple of times chipping off the E-coat. May not sound like a big deal but where do think it is going to start rusting? They spend all this money putting on a special coating and then don't protect it prior to shipping. Poor quality control! I had to paint it where the coating was chipped off.

Etrailer Expert

Jenny N.


When the hitches are shipped to us they are shipped in large pallets all together and this can cause chips or scratches to the powder coating. You already have done what we would suggested by painting those areas.


Fits as advertised. Installation took 15min max.

2010 Acura RDX

The trailer hitch appears well built and the installation was straight forward but I did have a problem with the quality of the mounting hardware. There are four bolts and washers of good quality but the nut with bendable strap that inserts into the frame for the forward bolts is of very questionable quality. The side of this nut split in half well before the specified XX ft lb torque value and although etrailer did send me a replacement I lost confidence in this particular piece or hardware and purchased a couple of high-quality nuts from the local hardware store. With a standard nut it's a little more difficult to install the forward bolts but worth the piece of mind. Because of this one piece of hardware a two star deduction.

2013 Acura RDX

Ok... thought you might like to hear from a auto repair shop. I chose this specific hitch and the supplier because of the reviews. The RDX is a new vehicle to the shop owners wife and we wanted the best we could find for her. We often use presumed simple jobs to help train our apprentices. This D.T. was no exception. I came out into the shop to check on his progress and it was installed! I mean in just a few minutes. Yes we had it up on a hoist, but the real insight was asking the techs, "how did it go?" Techs responded with the usual, just a few words... "slammed it" and "done". Folks... that means you can do it too at home. It looks great and the bosses wife is happy! Pictured are Master Technician Lance and Apprentice Technician Eric. Our recommendation to you is this... great product, great supplier, order it!

John B.


The hitch is working great and the RDX is doing things never before possible since we purchased the Draw Tite hitch from you. Thanks again.


Hitch installed on my 2011 Acura RDX as the video explained. Love your videos! Due to my car being 8 years old, I had to use a tap to clean out the rusty frame threads before installing the two rear hitch bolts. The bumper brackets were a bit in the way, but after a small amount of bending outward the hitch cleared them. After cleaning out the treads and bending the bumper brackets, hitch installation was a breeze. Great products and great prices. Thanks etrailer!


15-20 minute install - I set the hitch up a small jack and jacked it into place and inserted the four bolts and tightened. Everything fit perfectly. Order process, delivery and communication was top notch.

Mike D.


One year out and everything is still performing flawlessly. Couldn be happier with the product.

2013 Acura RDX

The Hidden Hitch arrived undamaged. It is well made, sturdy, with a nice finish. Installation took me about an hour on my 2013 RDX. I ended up removing the plastic pins that hold the fascia to the two brackets. It was the only way I could line up the holes. After I did the installation, I watched the Draw-Tite video, which is longer and more detailed than the Hidden video, and includes instructions to remove the pins before installation, and shows how the bend the brackets after installation. I wish I would have watched the Draw-Tite video before I did the installation, it would have saved time. Also raising the vehicle would have made the installation easier. But I am very pleased with and the final install.


Pretty straight forward installing the hitch.
have to lift up the car.

Only problem I had was holding up the hitch while placing the bolts.
The hitch is pretty heavy and need an extra strong person to hold it up.
I did not have another person helping me but fortunately, I had some lifts to hold up the hitch.
Once I figured out how to hold the hitch up, it took about 20 minutes to finish.
Minor note.....the black welded bolts were difficult to get into the holes.
Took about 5 minutes each.
Might have been because I was lying down on the ground.
Also, it comes with two hex nuts.
These are meant for the welded bolts but I think they are just extra (since the welded bolts go straight into the vehicle).

All in all, great value and excellent service.
Received the hitch within a week on free shipping.

Ford Edge

Product arrived on time and looks to be very study. As with other reviews the packaging was significantly torn by the loose trailer hitch that was only secured at one end inside the large cardboard box. This allowed the hitch to slide back and forth within the box. The hitch should be attached to the box at both ends. Fortunately, only the bottom back edge of the hitch had the paint scraped off. This is the part that tore the side of the box open for about 1.5 feet. No other damage. It bolted right into place within 25 minutes using a six-pack cooler as a second pair of hands to hold it up while inserting the bolts. My planned use for the hitch is for a bike rack and maybe a platform carrier. I would recommend the hitch but packaging leaves a lot to be desired.

2015 Acura RDX

Hitch installed with exact fit, see photo "hitch.jpg". Instructions said the car's rear facia would slightly tuck over the top, but this tuck is so small you can't see it in regular viewing. I wanted the hitch to carry my really great rear mount bike rack. See photo "Bike Rack.jpg" Mission Accomplished! The mouth of the receiver is set back from the face of the car's bumper by about an inch. I have mixed feelings about this. On one hand, the hitch is out-of-the way so you won't bruise your shins on it when its not being used. On the other hand, it is harder to reach the pin hole, and the load might end up very close to the car. With my bike rack, it was a close question, but it did clear the tailgate by a tiny margin, so probably no extension is needed. An extra inch of length on the receiver would be nice.

2012 Acura RDX

I am very happy with these products (hitch & rack), as well as the follow up and support received from etrailer.
I installed the hitch in an hour and a half by myself. I lost a half hour because I didn't clean the existing wedge nuts immediately. (Though the instructions were clear, CLEAN THEM on older cars.) Rust and crud didn't allow the bolt to easily screw in.
The instructions and associated video made the install simple. The product is very well made and very secure. The look on my 2012 RDX is clean on the car and you hardly notice the hitch is there. Highly recommend it!
The bike rack likewise is well made, simple to install and solid holding 2 bikes.

2017 Acura RDX

Excellent, Excellent, Excellent! Hitch arrived on date promised and was a synch to install. Install video was helpful! Fits perfect on our 2017 RDX. Highly recommend Etrailer!



Great! No issues

2015 Acura RDX

Shawn at etrailer was very pleasant when I placed my order. Product arrived on time and well packed-no damage or scratches. Very solid, well crafted. A small floor jack and 20 minutes later the hitch was in place! Fit was perfect, so simple. Used it the following day to take daughter for great bike ride.
Backstory - I had ordered a hitch & installation from a national vehicle rental company but after 2 weeks of delays I canceled order and called etrailer. The etrailer hitch arrived in 3 days and was on car in no time. Wish I would have started the process with etrailer.

2016 Acura RDX

I ordered the hitch for 2016 Acura RDX. The package arrived on time using the 3 day shipping thats available. Everything was intact with no dents or scratches on the hitch. The quality of the material is excellent. Installing the hitch was easier than I imagined. I used two jack stands to hold the hitch in place close to the mounting holes. I did it alone but an extra hand is welcome. I cleaned the mounting holes before starting and had no trouble screwing the bolts in. I didn’t have any problems and did it in my driveway. It was approx 30 mins for the install time. I plan on putting a bike rack on the hitch but may do some hauling also.

2013 Acura RSX

I was very happy to see that there were a few options to pick from for my 2013 Acura RSX. The user comments on the website helped tremendously with the install. The only tricky part was pushing out the rear bumper plastic covering enough to get the hitch into place. Would have been easier if I had a helper for sure but finally used a 2x4 and some leverage to ease it in. Also, use a screw driver in the non-threaded installation holes to move the bumper into place to make it easier. Super fast, free shipping and great email updates from was also much appreciated. Thanks!


Perfect fit on my 2017 Acura RDX

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Is Spacer Block Needed When Installing Draw-Tite Trailer Hitch # 75784 on 2014 Acura RDX
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 referenced in your question is confirmed to fit your 2014 Acura RDX. For your 2014 model, the included spacer block is indeed needed. It will be taped into location on the top of the hitch at the rear most hole. I have attached an image to clarify this. This Class III hitch will provide you with a 2 inch receiver opening and has a 4,000 pound towing weight capacity.
    view full answer...
    Image 1 for
  • Is Spacer Block Needed When Installing Draw-Tite Hitch # 75784 on 2013 Acura RDX
    When installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 on your 2013 Acura RDX the included spacer block is indeed required. I have attached an image from the installation instructions that show the block being used (part 5 in the picture) on the Acura RDX starting with your 2013 model year. I have included the full PDF link for the installation manual below that you can also look through.
    view full answer...
    Image 1 for
  • Installing Draw-Tite Class III Trailer Hitch on 2015 Acura RDX
    The Draw-Tite Class III Max Frame Receiver Hitch # 75784 referenced in your question is confirmed to fit your 2015 Acura RDX. We do not have any installers based in Maryland, however any local mechanic or shop with a good reputation should be able to handle the installation without issue. Because the hitch is custom-fit for your vehicle, it will use existing holes in the vehicle's frame for a no-drill installation. It has an estimated installation time of around 40 minutes. All of the necessary...
    view full answer...
  • What Are the Torque Specs for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784
    In the attached installation instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 you can find the torque specs directly under step 4. Sometimes the manufacturers will slightly change some hardware to accommodate a wider range of vehicle so we always recommend checking with the current instructions (found on the link) just in case the torque setting has changed. I have attached a sample installation video for you to check out.
    view full answer...
  • Where to Jack Up a 2014 Acura RDX to Install a Trailer Hitch
    Officially, the rear jack point on the 2016 Acura RDX is a few inches forward of the rear tire. There is a tab on the vehicle that fits a notch in the jack that comes with the vehicle. But what I would do is go to a local auto parts store and get some ramps and back the vehicle up the ramps. Otherwise any strong structural component such as the frame/uni-body support would work. I would not use the wishbone suspension support bracket there in your picture because it is pretty far underneath...
    view full answer...
    Image 1 for Image 2 for
  • Install Instructions for Draw Tite Hitch # 75784 for 2015 Acura RDX
    I attached a picture to this page that has the install instructions for the Draw Tite part # 75784 that you referenced.
    view full answer...
    Image 1 for
  • Correct Draw-Tite Trailer Hitch for a 2004 Honda CR-V
    The correct trailer hitch for your 2004 Honda CR-V is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75690, not the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75784 which is for an Acura RDX. I have attached an install photo and video on the correct trailer hitch for you. If you can let me know what you are using it for I may have other recommendations for you as well.
    view full answer...
    Image 1 for
  • Installing Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 on 2017 Acura RDX
    The Draw-Tite Class III Max Frame Receiver Hitch # 75784 referenced in your question is confirmed to fit your 2017 Acura RDX. There is actually no fascia trimming or modification required for installation. On some models, it may be necessary to pull down a bit on the fascia to get additional clearance for the hitch crosstube, but this will not cause any distortion to the bumper. I have attached an image from the installation instructions to clarify this. Otherwise this is a custom fit...
    view full answer...
    Image 1 for
  • Why Does Trailer Hitch for 2016 Acura RDX Have Higher Towing Capacity than Vehicle
    With any towing setup your overall towing capacity is only as strong as your weakest component. So if you were to install a hitch on your 2016 Acura RDX that has a higher towing capacity than the vehicle like with the Draw Tite # 75784 you would be still limited by the vehicle since a towing setup is only as strong as it's weakest component. They design hitches for vehicles and then try to make them as strong as possible and rate them independently of the vehicle which is why they capacity...
    view full answer...
  • Will Draw-Tite Class III Hitch # 75784 Install the Same on a 2011 Acura RDX as a 2010 RDX
    Yes, the Draw-Tite Class III Max-Frame Trailer Hitch, item # 75784, will install the same on a 2011 RDX as it does on a 2010 model. The instructions, see link, indicate that you will not have to remove any body parts for installation of this hitch.
    view full answer...
  • Installation of Trailer Wiring Harness for 2013 Acura RDX
    For your 2013 Acura RDX, the wire harness for a trailer connection needed is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118569. There is a fuse required that comes with this kit that needs to be installed in the fuse box under your hood. There will be a fuse position labed (20A ) Trailer. If this does not activate your trailer wiring, then there is a relay that will need to be obtained from your Acura dealer. Most vehicles already have the needed relay and...
    view full answer...
  • Recommended Trailer Hitch for 2018 Acura RDX
    For your 2018 Acura RDX I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784. This Class III hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. It features a powder coated steel construction and its 4,000 pound towing weight capacity makes it the highest rated hitch available for your vehicle. Since it doesn't require the use of an additional stabilizing strap with non-trailer loads like the Curt alternative, this particular...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2010 Acura RDX
    For your 2010 Acura RDX the Draw Tite hitch part # 75784 is a confirmed fit and will work well for towing a small trailer or carrying a bike rack. I like this option over the Curt as it does not require the use of a stabilizer strap like the Curt does when carrying a non-supported load like a bike rack. I attached an install video for this for you to check out as well. For trailer wiring you'd then want to use the Tekonsha kit part # 118500 which will give you a 4-way. This brand of trailer...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2018 Acura RDX Towing Small Trailer
    The trailer hitch I recommend for your 2018 Acura RDX is the Draw Tite part # 75784 which is a confirmed fit. I recommend it because it has a two inch opening which has the best capacities, has a concealed crosstube so it will look the best, and because it comes with a bracket for trailer wiring to mount to. For trailer wiring you'd then want the Tekonsha kit part # 118569 because it is our most reliable option we offer for your RDX. Since you wanted to do some towing you might be interested...
    view full answer...
  • Will Hitch Receiver for 2010 Nissan Rogue Fit on a 2014 Acura RDX
    Since your hitch receiver is specifically designed to fit the Rogue and should not be altered to fit another vehicle, a hitch for a 2010 Nissan Rogue, like the Draw-Tite Max-Frame Trailer Hitch Receiver, # 75902, is not compatible with a 2014 Acura RDX. I have attached a link to all of the hitch receivers that are available for your 2014 Acura RDX. I personally recommend going with the Draw-Tite Class III Hitch Receiver, # 75784, for your RDX. This hitch bolts directly to the frame and...
    view full answer...
  • Hitch and 3-Bike Rack Recommendation for 2014 Acura RDX
    The Draw Tite hitch part # 75784 that you referenced is an excellent choice for carrying a bike rack with your 2014 Acura RDX. It's mostly hidden and has great towing capacities. The Swagman Trailhead 3 bike rack part # S63365 that you referenced is also a really great option too. This bike rack is a great value as it has the same features as the more expensive racks but at a really low price.
    view full answer...
  • Will Installing Trailer Hitch With Higher Ratings Increase Towing Capacity Of 2017 Acura RDX?
    When trying to determine what the towing capacity of your 2017 Acura RDX is, keep in mind that you will be limited to the lowest rated component, and no products will increase the towing capacity of your vehicle past the manufacturers ratings. I checked the owner's manual for your vehicle and you are correct that you are limited to 1500lbs towing capacity, and 150lbs tongue weight. Even though the Draw-Tite Trailer Hitch Receiver # 75784 you were looking at has a 400lb tongue weight rating...
    view full answer...
  • Replacement Hardware for Draw-Tite Trailer Hitch Receiver # 75784
    We do carry the replacement hardware you're looking for. Part # RHK. When ordering you'll need to select the manufacturer, Draw-Tite, and then put in the hitch model # 75784.
    view full answer...
  • Do I Still Need to Use the Stabilizer Straps on my Curt Hitch When Carrying a Bike Rack
    Stabilizer straps are no longer required when using a Curt hitch like the # C13130; this was an older requirement for some Curt hitches when using a bike rack only, but they have since determined that it is not required or recommended any longer. You could also use the Draw- Tite # 75784, which the main difference is that the receiver is about 1-1/2" shorter, so it's not as ideal for bike racks since the clearance from the vehicle will be minimal. I've linked an installation video of the...
    view full answer...
  • Trailer Hitch for 2016 Acura RDX for Use with Thule T2 Platform Rack and Pedego Bikes
    All three of the 2-inch hitches we offer for your 2016 Acura RDX, one of which is the Curt # C13130, will mount to the same points on your RDX. All will be in essentially the same position at the rear of the car, with the hitch pin hole about 3-1/2-inches from the rear edge of the bumper. Of the three hitch options I suggest the Draw-Tite # 75784 since it is the lowest-cost hitch and since it does not require you to use a stabilizing strap which is required for the Curt hitch. Your Thule...
    view full answer...
  • Is Acura RDX Vehicle Warranty Affected by Installing Aftermarket Class III Trailer Hitch Receiver
    Installing a hitch on a vehicle in order to use a 3-bike hitch bike carrier will not void your vehicle's transmission warranty if the hitch is installed in accordance with the written instructions and used within the weight bearing capabilities of the vehicle. Consumers are protected from such concerns by the Federal Magnusson-Moss Warranty Act. The Act states, in part, that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty...
    view full answer...
  • Can a 2017 Ford Explorer Tow a Boat Trailer
    The maximum towing capacity of a 2017 Ford Explorer will vary from 2,000 lbs to 5,000 lbs depending on engine options. If you take a look at page 240 of your owner's manual you will see these capacities listed for you here. The total weight of the boat and trailer cannot exceed the maximum towing capacity so if that is the case then yes, you can tow a boat trailer. I have attached some parts you will need below as well. Draw-Tite Max-Frame Trailer Hitch Receiver part # 76034 (Highest Weight...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2013 Acura RDX to use with Bike Rack
    The Draw-Tite Class III Max Frame Receiver Hitch # 75784 referenced in your question is confirmed to fit your 2013 Acura RDX and is exactly the hitch I recommend for your vehicle. Unlike the Curt trailer hitch that is also custom-fit for your vehicle, the Draw-Tite model does not require you to use stabilizing straps to support non-trailer loads like bike racks and cargo carriers. When installing the trailer hitch, you may need to pull the fascia down slightly in order to slide the hitch...
    view full answer...
  • Hitch-Mount 2-Bike Rack Recommendation for Heavy Bikes for 2018 Acura RDX
    Since your RDX already has a 2-inch hitch like Draw-Tite # 75784 you are all set for installing a 2-bike carrier for your beach cruiser and electric bike. We do have a rack that will fit your hitch, handle your bikes' higher weights and also be exceptionally easy to use: The Thule Easy Fold platform carrier # TH903202 which is shown in the review video I linked for you. This platform style carrier will fit both 1-1/4-inch and 2-inch hitches, it handles two bikes up to 65-lbs each, it includes...
    view full answer...
    Image 1 for

< Previous

Do you have a question about this Trailer Hitch?

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Ryan G
Test Fit:
Ryan G

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.