bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 76020
lowest price pledge
Retail:$355.79
Our Price: $179.94
You Save: $175.85
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 40 lbs
Quantity: 
In Stock
Draw-Tite Custom Fit Hitch - 76020
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 76020 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (240)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 76020

  • Class III
  • 2 Inch Hitch
  • 4500 lbs GTW
  • Concealed Cross Tube
  • Draw-Tite
  • 675 lbs TW
  • 4500 lbs WD GTW
  • Custom Fit Hitch
  • 675 lbs WD TW

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Integrated mounting point lets you attach a bracket for a 4-way or 7-way plug (sold separately)
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,500 lbs
      • Maximum GTW when used with weight distribution: 4,500 lbs
    • Maximum tongue weight: 675 lbs
      • Maximum TW when used with weight distribution: 675 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76020 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

Installation Details 76020 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76020

Average Customer Rating:  4.9 out of 5 stars   (239 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

Overall the installation video made it very easy to install with a helper. The quality of the trailer hitch is very good. There was some paint that had chipped off the edge exposing bare metal which needed to be protected but otherwise I am very satisfied with the product.


Comments
Great. No problems attaching bike rack. Works as intended. No significant rusting.
Paul - 06/19/2021

by:
2019 Mazda CX-9

installed this on my 2019 Mazda CX-9. Took about 20 mins. Make sure to add loctite to boots and torque it down to specs. I highly recommend watching the [online] videos on the install. Makes it much easier. Super easy install and the hitch looks great! Highly recommend this with the welded bracket. Keeps wiring in place and much prettier looking.



by:

Bolted up perfectly, pulled a uhaul trailer across three states. Also works great with my motorcycle hitch rack. No reason to look any further!


Comments
Excellent! Love it.
Sidepipe - 04/20/2022

by:
2018 Mazda CX-9

Installation will certainly go faster with a second person helping. Doing it myself it took me close to an hour to complete. I didn't bother putting the car up on jacks and found there to be sufficient room to maneuver.

The install video on the site is super helpful and all that's really needed. It does help clear up the paper instructions that come with the hitch.

I used a strap to support the exhaust pipe and like someone else mentioned also utilized an overturned 2 gallon bucket to support the muffler while getting it off the hangers. There was enough clearance for the bucket to slide right underneath, but I was parked a very mild grade.

I was able to get it off the mounts with just WD-40 . Since I didn't jack up the car, I was able to leverage my body weight and the fact that car was sitting on all four wheels to pull the rubber mounts off without a pry bar. I sat with my legs under the car and grabbing each side of the rubber mount was able to work them off.

I found the rear mounts were far easier to get off than the front.

Once I got the mounts off, I removed the supporting bucket and loosened the straps to lower the exhaust further.

I then used the bucket to support the weight of the hitch as I got it in position. Leaving the guide wires in place for the bolts helped me align the hitch since I was working alone.

The paper instructions mention using the washer to pinch the bolt in place to make it easier to get the nut on without the bolt being pushed up into the hole. This was particularly key to doing the install alone and one handed.

Once you get one bolt attached the rest goes faster and is a lot easier.

A deep socket and extension bar was critical in getting the bolts on to the proper torque. Without the deep socket I was able to get the hitch bolted on tight enough to drive to the hardware store to get the deeper socket to then torque to 110 ft/lbs as per the instructions.

Once I got the hitch attached, I simply reversed the process by again using the assistance of the bucket to support the exhaust as I got it back on the hangers.

A bucket or some other easy to maneuver item to help support the exhaust and hitch were definitely key in attempting to do this yourself.



by:
Mazda

Installed on a 2020 Mazda CX-9. It tucks right up under the bumper so is un-obtrusive when not being used, but works great when we need to tow the camper. Love it!



by:
2016 Mazda CX-9

I was very pleased with the quick turnaround on my order. The product itself appears to be well made and was reasonable to install, although considering the size and weight of the hitch, it would have gone much more quickly with an extra pair of hands. This hitch was installed on a 2016 Mazda CX-9. The one issue I had was with the lower trim panel that had to be removed for the installation. After bolting up the hitch, I realized that I was not going to be able to get the trim panel back into position with the hitch bolted all the way up, and had to drop it some by loosening the bolts in order to get the trim between the hitch and the mounting points. Once I started retightening the bolts, I found that the hitch was pulling the middle of the trim piece up causing the two ends of the trim to splay downward. Snug is good but too snug can cause some problems. It is not a biggie because it is for the most part not easily seen by the casual observer, but if the manufacturer would like to make a good product better, they might take a look at dropping the hitch down just a bit in order to provide some relief between the hitch and the trim piece.



by:

Nice price, fast shipping, and easy install with the available videos. Less than two hours to install the hitch and the wiring. Looks great and I saved a bundle. Comes with everything you need for a professional DIY install.



by:
Mazda

Fit nicely on my 2016 Mazda CX-9 Signature. Installation is straight forward but you do need to be handy. Or have a pro install it, it should take them only 30 minutes. I also purchased the Mounting Bracket 4-Pole Flat 18144 and the Tekonsha Custom Fit Vehicle Wiring 118278 which does fit all 2016 CX-9s (all '16 CX-9s have the harness already installed). Photos attached of my install in case this helps.



by:

The installation video is really helpful. If you follow along, installation will be a snap. A couple of things I ran into -- this is really a two person job. I was working alone, so I pressed a floor jack into service to help support the hitch when I was mounting it to the car frame. Do yourself a favor and get a deep 7/8" socket to torque down the nuts. Otherwise a pretty straightforward install. It looks great on the CX-9 and I'm looking forward to my first tow.



by:

No issues installing on 2021 Mazda CX-9. Looks good installed and is not an eye sore. Best part is that does not interfere with hands free trunk opening sensors.



by:

First, I want to give kiddos go such a thorough set of pictures, videos and resources in your website. Shipping was prompt and delivery was quick. My only feedback here is to provide the actual tracking #, to be able to use 3rd party apps.

The hitch looks well built and great finish. It comes with everything needed to do the install. I did the installed by myself in about 45 min.



by:

Hitch was great fit for 2020 Mazda CX 9. Install was straight forward and took this mid 70’s guy about two hours to install with no assistance other than my floor jack and ratchet strap to support the exhaust. Fits well and only the 2” opening shows. Better yet was the outstanding service and assistance I received from Tommy C. I have ordered from etrailer for years and have yet to be disappointed.



by:
2018 Mazda CX-9

Very heavy duty and the videos made installation a breeze. I was a bit nervous installing myself but really wasn't that big of a deal. Having two people hold the hitch up while I got a couple bolts on was definitely helpful. Now I just need to find a boat!



by:

This hitch is a great product with no issues, and I was able to successfully and correctly install this hitch by myself without a jack in about 1.5 hours.



by:
2019 Mazda CX-9

Installed on 2019 Mazda CX-9 in about an hour using etrailer's video. Parked with wheels on a curb to give me a few inches more room underneath. Removed and discarded "extra panel" in front of rear bumper per 2019 video. Be careful not to cut yourself on the heat shield while removing the panel, its edges are very sharp. Instructions asked for 110 ft-lb torque which was at the limit of my wrench.


Comments
Hitch continues to perform well. One minor issue is that the receiver is fairly far forward from the back bumper the bumper overhangs the hitch by over 3 inches. This means some hitch racks may be closer to the vehicle than intended. Another is that the hitch is low to the ground so some hitch racks touch the ground occasionally due to the poor angle of departure. None of this affects trailer use.
Roy - 03/05/2021

by:

Went on simple, and has been rock solid.



by:

Installation was pretty easy thanks to a very detailed and to the point video. My main concern was lowering the muffler without damaging it - i am not a mechanic and never done it before, but that ended up being an easy part. WD-40 helps a lot sliding rubber holding muffler to the point when sliding it back on takes two minutes. Hardest thing for me though was holding actual frame (i was doing the job alone) and aligning it to attach to the bolts. I used small plastic bucket and put frame on it after sliding it above dropped muffler to put it in a position to attach to the bolts. Then i would lift it up little by little and would put under the bucket little one inch sheets of plywood i found laying around in my garage lifting the frame finally to the level where i could attach the frame finally to the bolts. It did take me an hour to install the product on my brand new Signature.



by:

I can’t say enough good things about this transaction. Got it in three days, outstanding video that showed exactly how to install hitch and wiring and fantastic price on quality class III hutch. Installed hitch and wiring in less than two hours. Thank you so much. Only regret was I didn’t order wire harness bracket For hitch and plug for receiver when I could have saved on shipping. My fault.



by:

Hitch delivered on time as promised. It was packed pretty well but had a few places that needed to be painted as the paint was knocked off to the bare metal. Installation was very easy. I am going to order a second one for another vehicle after the busy Christmas season and hope it's not damaged. Overall I'm happy with etrailer.



by:
2016 Mazda CX-9

Well designed and quality product. With the aid of the video, I was able to install the receiver and wiring with very little issues in a timely manner.
I wanted a two inch receiver and concealed trailer wiring which was not available from the dealer.
I would recommend this product without hesitation.


Comments
Great product, As a light duty user, I have not experienced any problems.
JB - 04/13/2020

by:

Installation videos, instructions, and materials made it easy. Step by step instructions were clear for a hassle free job. I’ve used the hitch on several long trips, and it has performed flawlessly.



by:

Took time but easy to install myself with trailer videos. Has worked excellent.



by:
Mazda

I have not used the hitch yet, my bike rack from etrailer is on the way, but the installation was so easy on my 2021 Mazda CX-9. My friend and I watched the install video and the actual install took us around 30 minutes. I opted for the Draw-Tite rack because of the bracket to accommodate the wiring harness if I choose to install that later.



by:

EASY PEASY!! 30 - 40 minute install by myself! After lowering the exhaust a couple inches as described in the video I feed the spring wires with the nut plate and nut thru the frame (very easy if you bend the last 1" of the wire near 90 degrees and feed it so the end is pointed down it will pop right out the bolt hole).
Once I had all 4 bolts in place I moved the hitch near the back of the car at this point I place my floor jack under the center of the hitched and while holding it in place I was able to roll it into position and feed the nut wires thru the appropriate hole in the hitch.
After starting the rear facing nut onto the bolt i did the same on the other side of the car , with 2 nuts on I lowered the jack and the hitch rotated right up against the frame allowing me to add the 2 remaining bolts .
Once all the bolts were torques I replaced the exhaust mounts and had a cold one.
IF only all car related task went so well great product cant wait to us it looks like it should for the money quality thru out....



by:

I’ve ordered many items from ETRAILER and all have been quality , delivered quickly and the installation videos are excellent. I think I’m up to 4 trailer hitches now and installations have been very easy.


25
240
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch



  • Is Torque Wrench Needed to Install Trailer Hitch on 2018 Mazda CX-9
    Yes, when installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 76020 on your 2018 Mazda CX-9 you will need to use a torque wrench to tighten down the hardware to the specifications listed in the installation instructions. This is the case with any vehicle trailer hitch and it is necessary so that the hitch stays secured to the vehicle when towing. I took a look at the installation instructions for the Draw-Tite hitch and found that in addition to a torque wrench (which you may...
    view full answer...
    Image 1 for
  • How Is Exhaust of Vehicle Usually Supported When Lowered to Install Trailer Hitch
    Lowering exhaust to install a hitch is a pretty standard install step. It's not too hard to do in most cases. It just requires you to pry the exhaust hangers off of the vehicles so that it can be lowered. Our installers routinely use a ratchet strap to provide support to the exhaust once it is removed from the exhaust hangers. The purpose of the strap is to control the descent of the exhaust so it does not fall too rapidly and damage something. The exhaust hangers are very easy to remove,...
    view full answer...
  • Does Draw-Tite Max-Frame Trailer Hitch Receiver Fit On 2016 Mazda CX-9
    The Draw-Tite Max-Frame Trailer Hitch Receiver, part # 76020 is designed specifically for the Mazda CX-9 for 2016 and newer. This is a Class lll hitch and it has a 2 inch receiver opening.
    view full answer...
  • Dimensions and Weight of Draw Tite Hitch 76020
    The overall width of the Draw Tite hitch is 41 inches, the depth front to back is 21 inches and the height is 8 inches. The weight is then 37 lb. Based on the standard checked back dimensions I believe this would be too large. Weight should be fine as that's typically around 50 lb.
    view full answer...
  • Is Trailer Wiring Bracket of Draw Tite Hitch for 2018 Mazda CX-9 Visible
    The bracket on the Draw Tite hitch part # 76020 is welded to the hitch and would not be removable. If you really wanted to remove it I am sure you could, but I would avoid cutting on the crosstube of the hitch and stick to just the bracket only. You'll want to paint over the exposed metal too. If you check out the picture I attached though you'll see that it's not really visible so leaving it alone might be fine too.
    view full answer...
    Image 1 for
  • Will the Hitch on a 2010 Mazda CX-9 Fit on a 2016 Mazda CX-9
    The hitch that fits the 2010 Mazda CX-9 is not compatible on the 2016 Mazda CX-9. We do have a hitch that will fit your 2016 Mazda CX-9. The Draw-Tite Max-Frame Trailer Hitch Receiver, # 76020, is confirmed to fit the 2016 CX-9. This hitch is rated Class III and has the 2x2 inch receiver opening.
    view full answer...
  • Will trailer Hitch Interfere with Hands-Free Lift Gate on 2020 Mazda CX-9
    The hands-free lift gate feature on your 2020 Mazda CX-9 will still be functional if you install the Draw-Tite Max-Frame Trailer Hitch Receiver # 76020. You may need to kick using a back and forth motion though instead of just waving your foot left to right for the sensors to pick up the motion. Attached is an installation video of this trailer hitch on a 2019 CX-9 that you can check out. If you let me know what you plan on using your trailer hitch for I can make some additional recommendations...
    view full answer...
  • Does the DrawTite Hitch Interfere with the Hands Free Liftgate on my 2020 Mazda CX9 Hitch
    You are correct! We have had good success with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76020 and the hands free liftgate operation. As stated it will block the very center where the larger portion of the hitch is but on each side it still registers. Check out the attached installation video for details. It is on a 2019 but will give you the same information.
    view full answer...
  • How to Remove Rubber Clamp on Exhaust Pipe During Installation of Draw-Tite 76020 on 2017 Mazda CX-9
    When installing the Draw-Tite # 76020, the exhaust holder does usually require an exhaust removal pliers but you can likely use a vice grips or some other type of pliers to get the exhaust freed up.
    view full answer...
  • Best Practice to Deal with Chipped Paint on Trailer Hitch
    If you notice chipped areas on your Draw-Tite Trailer Hitch # 76020, for your 2018 Mazda CX-9, the best thing to do is lightly sand that area to get it evened out and then paint over it to prevent the rust from spreading. Since hitches are underneath the vehicle where road debris is flying around it's a good practice to routinely check the hitch for any places where it has been hit and needs a touch up. We actually have a whole rust prevention help article which I'm linking to this answer...
    view full answer...
  • Installing a Draw-Tite Hitch on a 2021 Mazda CX-9
    The Draw-Tite # 76020 does have a tech tip of needing to modify the heat shield as it does fit a few years of the Mazda CX-9. Some of the 2018 models did need this shield modified slightly to fit properly, but it looks like that may have been limited to that year. I have an install video we did on a 2020 CX-9 and there was no modification needed. As we have not had a 2021 to do an install on as of yet, I can't 100% confirm the need to modify the heat shield, but odds are you will not need...
    view full answer...
  • Will the Trailer Hitch for a 2020 Mazda CX-9 Work With Hands Free Power Lift Gate
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76020 which is a fit for a 2020 Mazda CX-9 and what I recommend using will work with the hands free lift gate sensors. That said, you will need to place your foot on either side of the receiver tube opening in order to activate them but aside from that you will be good to go. I like this hitch in particular because it has a hidden design and comes with integrated trailer connector mounting bracket.
    view full answer...
  • Does Trailer Hitch from 2022 Mazda CX-9 Also Fit 2019 CX-9
    A trailer hitch from a 2019 Mazda CX-9 would also fit a 2022 CX-9 like the Draw Tite part # 76020 that you referenced. Worth nothing is that the hitch install hardware is one time use and we offer replacement hardware with part RHK.
    view full answer...
  • Trailer Hitch and Folding Cargo Carrier Recommendation for 2018 Mazda CX-9
    First let's start with a hitch for your 2018 Mazda CX-9. For that the Draw Tite part # 76020 is the best option. It has a 2 inch hitch opening which you'll need so that you can install and use a folding cargo carrier. This hitch also has a concealed crosstube and the best price. Then for a folding cargo carrier the Curt carrier part # C18151 would be what I recommend. It has a 500 lb capacity, it folds like you need and it has a rise built into the shank for added ground clearance.
    view full answer...
  • Trailer Hitch and Wiring for a 2021 Mazda CX-9
    The Draw-Tite Max-Frame Trailer Hitch # 76020 is going to be a great option for your 2021 Mazda CX-9. This hitch has a concealed cross tube and good towing capacities. It has a 2" receiver opening and includes an integrated mounting point that lets you attach a bracket for a 4-way like the T-One Vehicle Wiring Harness # 118278, which is the correct wiring harness for your CX-9. The T-One connector plugs into your vehicle's factory tow package wiring harness, which is located in your rear...
    view full answer...
  • Which Hitch for 2021 Mazda CX-9 Has Best Clearance for Bike Rack
    The Curt hitch part # C13284 has the best clearance for a bike rack to fit past the rear bumper. It has 5 inches from it's pin hole out to the furthest edge of the rear bumper whereas the Draw Tite # 76020 has 7 inches.
    view full answer...
  • What is the Ideal Height for a Ball When Towing a U-Haul Trailer?
    The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite # 76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find about the average height of the coupler on U-Haul trailer, they will sit at 18 1/2 inches. So with that being said, I suggest going with the Curt # C45240. This will have a 7,500 pound capacity and 4 1/2 inches of rise, putting you within 1/2...
    view full answer...
  • Replacement Hardware For Draw-Tite Trailer Hitch Receiver On 2021 Mazda CX-9
    We do have the replacement hardware for the Draw-Tite # 76020. You will need Replacement Hardware Kit For Trailer Hitches # RHK and enter the hitch item number 76020, and Select Draw-Tite from the drop down menu. This will include the fish wire and everything needed to complete the install.
    view full answer...
  • Installed Position of Draw-Tite & Curt 2-Inch Hitches on 2016 Mazda CX-9
    We have not yet had a local customer bring in a 2016 Mazda CX-9 for a hitch install but I can give you some help in determining the installed position for a hitch. I went to our warehouse and measured Draw-Tite hitch # 76020 and Curt hitch # C13284 so you can use those dimensions to give you a close approximation of where the hitch tube will be relative to your bumper and to the ground when installed. Since both install on the bottom surface of the car's frame what I did was measure from...
    view full answer...
    Image 1 for
  • Hidden Trailer Hitch Recommendation for 2019 Mazda CX-9
    The most hidden and best hitch option for your 2019 Mazda CX-9 is the Draw Tite hitch part # 76020 as only the hitch opening hangs below the rear bumper and it has a 7-way bracket built into it which will make mounting a 7-way like you are wanting as easy as possible. I attached an install video and picture for this for you to check out as well. For trailer wiring you'd need to start with a 4-way like the part # 118278 which installs easily and then you'll need to convert it to a 7-way...
    view full answer...
    Image 1 for
  • Removal of Lower Trim Panel for Trailer Hitch Receiver Installation on 2016 Mazda CX-9
    On both the Draw-Tite # 76020 and Curt # C13284 trailer hitch receivers the lower trim panel on the 2016 Mazda CX-9 is not reinstalled. I've linked videos as well as the install instructions of both hitches for you to take a look at.
    view full answer...
  • Will T-One Connector Fit 2018 Mazda CX-9 With or Without OEM Hitch
    According to my research, and my contact at Tekonsha, the 2016 and 2017 CX-9 models both came with the connector for the T-One # 118278 as a standard. Since your 2018 Mazda CX-9 is the same generation it would be surprising if you didn't have that connector. I did check the online version of your owner's manual and it states on page 6-58 that the #8 "Trailer Hitch" fuse is only included on some models. You may want to check the left side of your fuse block compartment to make sure that...
    view full answer...
    Image 1 for Image 2 for
  • Recommendation for Adding 5-Way Trailer Connector to 2019 Mazda CX-9
    On your 2019 Mazda CX-9 there is a factory port behind the passenger side trim panel that accepts a custom 4-Way trailer harness plug. If this is what you are referring to when you mentioned that your vehicle has the trailer ready connector, then you will want to start with the Tekonsha T-One Wiring Harness # 118278. This will plug right into that factory port to provide you with a 4-Way connector. From there (or if you already have the 4-Way connector) I recommend simply adding the Tow...
    view full answer...
  • Can I Use an Equal-i-zer Weight Distribution Hitch with the Draw-Tite 76030 for a 2019 Mazda CX-9
    Yes. The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76020 can be used with an Equal-i-zer weight distribution hitch like the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW # EQ37060ET. You will want to confirm in your 2019 Mazda CX-9's owners manual that a weight distribution hitch can be used with the vehicle, but the Draw-Tite # 76020 can be used to tow a trailer with weight distribution attached. If you can...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.