bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 76138
lowest price pledge
Retail:$314.89
Our Price: $183.94
You Save: $130.95
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 34 lbs
Quantity: 
In Stock
Draw-Tite Custom Fit Hitch - 76138
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 76138 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (717)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 76138

  • Class III
  • 2 Inch Hitch
  • 4500 lbs GTW
  • Concealed Cross Tube
  • Draw-Tite
  • 675 lbs TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,500 lbs
    • Maximum tongue weight: 675 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76138 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

Replaces 75217

Installation Details 76138 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76138

Average Customer Rating:  4.9 out of 5 stars   (717 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:
2018 Mazda CX-5

Installed it as per your video instructions. Took me an hour an a half, but that was due to installing it by myself. Looks good. see photos.
I bought for transporting my E-bike, and other


Comments
Holding strong, works...
Richard - 06/22/2022

by:

This is a great quality product with excellent installation support that I have come to expect from etrailer! My hitch receiver came with all hardware and ingenious "fish wires" to install this unit making it a simple procedure. For a person like me doing this in my driveway I can say that having an assistant, while not necessary, would make this install much easier. Other suggestions to future installers is that the latest etrailer video for this Draw Tite is a must watch. Additional suggestions are: leave all 4 rubber muffler hangers on the top frame hanger posts, twist the rearward pair to point to the front of the car before mounting the unit and have a deep and shallow (standard depth) 19mm or 3/4 inch socket for your torque wrench since room is limited.


Comments
Works well as expected. Will be buying from etrailer in the future.
Mark P - 12/06/2021

by:

Fairly simple installation with clear instructions. Took me about an hour doing the install alone. Didn't need to lift the car off the ground, and I used a jack to lift the hitch while I bolted it down. Hardest part was torqueing down the bolts. My torque wrench was relatively short, so I needed to assemble my own version of a breaker bar to get the bolts tightened to specifications. All in all, very impressed with the part, installation, and price!



by:
2019 Mazda CX-5

I couldn’t be any happier with this purchase. The drawtite hitch is solid and is even hidden well beneath the rear bumper, so that’s a plus. It took the mechanics less than 30 minutes to install it since it was a custom hitch. I’ve always wanted a hitch specifically for carriers and bike racks, now I have one and am very satisfied with my purchase. Thank you Etrailer for all of the research you all do and for the very informative site. It cuts my work in half. Here is a photo of my Mazda with hitch installed and an overdrive sports rack hooked to it.


Comments
I am very pleased with this product!!! I have not had any issues, it’s been reliable and still looks like a bought it yesterday. Absolutely no rust and since I do not have a carport or garage, it’s constantly exposed to outdoor conditions in Western NC many love this area, it’s temperate rain forest. Anyway, I do not regret purchasing! Love it! I keep a 3- bike rack carrier hooked up at all times bc I ride a lot! Every other day or so. The bike I own is a radrover, so it weighs about 60lbs plus. Also, I have two regular bicycles for cruising, which are lighter, but regardless, the hitch has proven to be strong and durable. One happy customer.
Melisa - 08/08/2021

by:

Product is exactly what is shown in photos and install video. I have the 2016.5 CX-5 and other than fighting for a good angle to move the exhaust hangers went pretty smoothly. Did the full install prep and clean up in about 45 mins. Def could have used another set of hands but my speed jack definitely helped. Doing my girlfriends car over the weekend



by:
2021 Mazda CX-5

2021 Mazda CX 5 Installation Review: Overall, the installation was pretty easy and straightforward. The installation video on etrailer was more than enough to install the hitch at home. All you need is an extra pair of hands to hold the hitch in place when bolting. Installation can be done without the use of jack stands. My only complaint(reason for 4 stars) with the product is the ECoat and Powdercoat. It already peeled off on a couple of trim edges



by:

Great trailer hitch! Strong and well crafted. Perfect for our 5 bike rack, and could clearly handle a trailer or other heavy load. Instructional video was clear and comprehensive. And it looks great. Based on this experience, this is a quality company that takes pride in providing quality products. My compliments to the staff.



by:

This hitch does NOT fit the 2021 Mazda CX-5. While it can be installed, it touches the muffler hangers. This causes a loud rattle in the car when you go over a bump. I talked to e-trailer about this and they recommended bending the muffler hangers or modifying it in some other way that they could not explain. If you have to modify your vehicle to make something fit, then I don’t think that counts as custom fitting.


Comments
This is a simple fix that you can do or a muffler shop can do for you. Please take a look at this help article regarding the issue:
-- Etrailer Expert Sierra K - 06/10/2022

by:
2018 Mazda CX-5

Install was not simple. Three guys and a lift. Had to put hitch on twice due too the fact we took off the muffler rubber holders. Can't get lower ones on with hitch in place. The electrical plug and play omg that was a joke. The entire left and right sides of back interior had to be removed to get to the "plug" and "play" connectors. I rate this as the most difficult hitch I've installed. I've done the BMW x1,x3 and Jeep Grand Cherokee hitch installs from your site...and they were seemless...awesome..but the mazada cx5 really sucked.


Comments
I recommend watching our video install on a 2019 Mazda CX-5 before starting on the installation for pointers. We also have a great FAQ on tips for installing hitches.
-- Etrailer Expert Jenny N - 02/15/2022

by:

Installed this myself on my 2021 CX-5 Signature about a year ago and have been pleased with it ever since. As described, it requires no cutting or modification, only the removal a small plastic trim piece under the bumper that seemed entirely unnecessary. A second pair of hands helps to lift the receiver into place, but otherwise an easy one-man job.

I did encounter two small hiccups along the way, though:
The install video on etrailer is for a slightly different receiver than the one I got, even though it says it should be for this same Draw-Tite receiver. The bolt pattern is a little bit different and the included instructions are brief and not super descriptive. I figured it out, though, not difficult just confusing at first because of the difference.

The second hiccup was probably my own mistake. After installing, the exhaust would occasionally bang against the receiver while driving, especially over rough roads. I got under there again, loosened up the bolts and pushed the receiver as far toward the rear of the car as possible and tightened it back up. It only shifted a fraction of an inch, but the banging is entirely gone now. The fitment is very tight so if you experience any banging or clunking try that out!



by:

This hitch was easy to install with the video instructions etrailer provided. I did not have to jack my Mazda CX-5 but the wheels are 19-inch. It was helpful to have someone to help hold the hitch in place while tightening the fasteners. Leaving the rear rubber hangers on the top while facing them forward was a good tip I saw in other reviews. I also ordered a bike rack that was just as easy to put together. Very satisfied with this company.



by:
Mazda

2021 Mazda CX-5. Owned this trailer for a year. Installation was made easy with the included wires which helped feed the bolts through the frame. Bought this mainly to use with my One Up bike rack and it’s worked great. Sticks out far enough to be easy to acces but not far enough to be in the way. Hardest part of installation was lowering the exhaust but it was still manageable with an extra hand. Would buy this again in a heartbeat if I had to make the purchase all over again.



by:

Solid equipment, easy installation and great instructive video!



by:

Shipping was very fast and the items were well packaged. The online video to help with installation was spot on and very helpful. Install on our Mazda CX-5 was easy with the included hardware kit. All and all took me about 45 mins to install the hitch. I did it all in my driveway with the help of my 2 sons and my wife.



by:
2016 Mazda CX-5

Product Was good and fit perfectly on my car.Installation is super easy as with instructions and videos.This is my first time installing a hitch so initially I struggled as due to lack of help. After a little research and with the help of a friend Installed in 15 Mins(Research and initials trail not counted).Things to remember.
1)Car ramps will help where we can pick from [hardware store].
2)Flat head screwdriver and soap water is super good option for removing Exhaust from hangers.
3)Rubber bushes should be on top hooks and facing front side of the car(Not back side to-wards trunk).
4)Remove one facia screw(plastic clip) for easy adjustment which was not demonstrated in the video but advised in the manual.
5)Better to keep the fish wires of the back bolts to avoid pushing them inside the frame.(C-retention rings will help where manufacturer is not providing).
6)Second person will make the job easy.

Paint Quality is very very poor which is pealing out as mentioned by others in this forum.
Installed my Kuat rack which comes with stabilizer and fits perfect.
yet to test on the roads.

Pics or not so clear.




Comments
This is one of the best thing i have chosen
Kamalakara - 06/09/2019


by:
2014 Mazda CX-5

Shipping was fast, install was a breeze. My wife helped me to lift into place but aside from that the videos were spot on on how to install it onto my 2014 cx5. We plan on using this for our camping trips. Next purchase will be a cargo carrier.


Comments
Perfect!!! After a year and several campingmoving my oldest into college trips it has been a blast. If I could I would buy 2!!!
C - 06/24/2021

by:
2022 Mazda CX-5

Good hitch with a bad paint job (package was intact but the hitch had significant paint chips out of the box, which required repainting before install). Etrailer gave me a $xx discount for this, appreciated. Install was quite easy, about 1h job with 2 people on my cx-5 2022. Good fit and looks good overall.


Comments
When it comes to shipping hitches, it is very common for them to arrive with scratches. We recommend using a rust-oleum type paint to cover the scratchesspots. This will prevent any corrosion in the future. I have a link attached for your reference. I have also sent this over to customer service for them to reach out to you.
-- Etrailer Expert Katrina B - 03/24/2022

by:

Very nice build and appearance. Nicely boxed for damage free shipping. Fairly easy installation after watching etrailer video. Am looking forward to years of reliable use.


Comments
I continue to be impressed with this hitch. I couldnt ask for anything better.
Tommy - 05/22/2022

by:

The trailer hitch receiver I purchased has been nothing short of amazing! I was skeptical about ordering a trailer hitch during a time when so many shipping delays and product shortages were occurring, but the trailer arrived in super fast and I was able to install the hitch with ease. I can't stress enough about how happy I am with the hitch and the service from etrailer.



by:

The product I received was bad quality. The hitch hole cover was off so I couldn't use it. Nothing fit in the hitch. Of course this was discovered after installation. etrailer sent another one but I had to pay for removal and installation again. Check the product before installation.



by:

Install went great, but having a second set of hands to install would be helpful. I used a bungee to hold up one side while I bolted the other into place and it worked. Would recommend etrailer and the hitch!


Comments
It’s great! Use it all the time. Looks as good as the day it was installed.
Jesse - 02/12/2022

by:

The hitch is quite well designed. You can only see the receiver from the back and the whole set up is well integrated into the vehicle and it seems very strong. This is definitely a two-person job. At least one person must have very strong hands to remove the muffler from the hanger. Remove the muffler side of the hanger. I used a spray lubricant and channel locks to take off the muffler from the hanger. I did not need to remove the electrical wire shown in the video. Took us about two hours. Would probably take us 40 minutes to do it again. If you want a hitch, this is the one to get.



by:

I was able to install the hitch by myself. Took me about 1 hour and the most difficult part was the muffler rubber attachment.
The wires included are a very clever solution getting those screws inside the car frame!!
Overall I had fun installing it and it’s a solid hitch.
I’m in my mid 40’s and fairly fit. I can see this being not so easy for folks not very handy and in bad shape but you can get it installed by a shop for 50$ If that’s a problem.
Shipping was incredibly fast and got it in 3 days.
100% recommended



by:
Mazda

Held up great after a year of New England weather! No rust. Relatively easy install on Mazda CX-5 but definitely good to have a helper hold/balance it in place when you fit the bolts thru the holes and start the nuts.



by:
2011 Nissan Rogue

This is the 2nd hitch I have purchased from etrailer and both were a positive experience. First for for a 2011 Rogue and now a 2022 CX5. Both times the hitch arrived on time or before schedule. All parts were included in the shipping box and product was as advertised. Install video on line was helpful. Install was easy. Took an hour and a half and I am no mechanic. Install on both vehicles were done without lifting the SUV. I did need help with fitting the hitch onto the bolts due to the weight, awkward position of lying on my garage floor, snug fit and I did not want to push the bolts back into the rail by accident. I did borrow my friends socket set and torque wrench because my small craftsman set could not produce enough torque to tighten properly. Overall, this is the only place I would purchase a hitch from.


25
717
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch



  • 2 inch Trailer Hitch Recommendation for 2017 Mazda CX-5
    We have a hitch solution that will work well on your 2017 Mazda CX-5 but the brand Hidden Hitch actually was discontinued so that is why it's not listed as a fit for your vehicle. The Draw Tite hitch part # 76138 is a fit for your vehicle and would work well for you though. This is a 2 inch hitch with plenty of capacity for towing or hitch accessories.
    view full answer...
  • Does Draw Tite Hitch part # 76138 Fit 2017 Mazda CX-5
    Yes, I checked with Draw Tite and the hitch part # 76138 that you referenced is a confirmed fit for your 2017 Mazda CX-5. We have install pics for it on the 2016 model which it also fits, but haven't had the chance to install it on a 2017.
    view full answer...
  • Carrying 4 Bikes with a Hitch Mounted Bike Rack on a 2016 Mazda CX-5
    Bike racks that are used on a Class I trailer hitch receiver are only allowed up to 2 bikes. This is because the additional force from weight being extended out from the vehicle is too much leverage for the vehicle to handle and could cause damage to the hitch, rack, and/or vehicle itself. So a bike rack for 4 bikes should not be used (And often will not fit) into a Class I trailer hitch. However, with that being said we carry Class II and Class III trailer hitch receivers that fit your...
    view full answer...
  • Does Draw Tite Hitch 76138 Fit 2016.5 Mazda CX-5
    Yes, the Draw Tite hitch part # 76138 is a confirmed fit for your 2016.5 Mazda CX-5. This hitch actually fits both the early and late model 2016 CX-5 models.
    view full answer...
  • Will Folded Up 1Up USA Bike Rack Clear Back of 2017 Mazda CX-5 w/Draw-Tite Trailer Hitch Installed
    With Draw-Tite trailer hitch # 76138 installed on your 2017 Mazda CX-5 Grand Touring model the distance from the center of the hitch pin hole out to the rear edge of the bumper is approximately 3 inches. The 1Up bike rack you plan on using will easily clear the back of the vehicle when folded up based on the measurements provided from 1Up.
    view full answer...
  • Will a Underbody Panel Need to Be Removed When Installing Hitch on 2016-1/2 Mazda CX-5
    When installing the Draw-Tite hitch # 76318 on your 2016-1/2 Mazda CX-5 Grand Touring Model there is an extra panel that is installed on this model only that may need to be removed. One of our customers found this out while installing this hitch to a 2017 Mazda CX-5 Grand Touring model. They described the trim piece at about 2 feet long and L-shaped. We do not know if the this piece is on a 2016-1/2 model CX-5, so you may not have to remove it from your vehicle.
    view full answer...
  • Trailer Hitch for 2017 Mazda CX-5 and Who Could Install it
    The install of a trailer hitch like the Draw Tite part # 76138 is pretty basic for a local mechanic. If you wanted one to go ahead and to the install it would be a matter of just finding one with a decent reputation. Or you could do it as well as it's not too hard. I attached an install video that shows the whole process as well.
    view full answer...
  • Does Draw Tite Hitch for 2017 Mazda CX-5 Have Tongue Capacity for Motorcycle Carrier
    The tongue weight capacity of the Draw Tite hitch part # 76138 that fits your 2017 Mazda CX-5 is 675 lbs. That means that the hitch by itself can easily handle the weight of your carrier and bike, but you have to check to make sure your vehicle is also rated high enough for this. You'll need to check the owners manual for the towing capacities and be sure not to exceed this figure. Basically you have to make sure the vehicle and the trailer hitch both have the needed capacity and you'll...
    view full answer...
  • Will a Trailer Hitch from a 2011 Mazda CX-7 Fit a 2017 Mazda CX-5
    You are correct that you need new hardware when re-installing a trailer hitch. When comparing the trailer hitches it looks like one from a 2011 Mazda CX-7 will not fit your 2017 Mazda CX-5. I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver # 76138 as a replacement. This is a Class III trailer hitch with a 2" receiver. The 2" receiver gives you more accessory options than a 1-1/4" receiver would. This trailer hitch has a max trailer weight rating of 4,500 lbs and a...
    view full answer...
  • Where is Underbody Piece That Needs to Be Removed on 2019 Mazda CX-5 GT for Trailer Hitch
    You are right that on the Grand Touring model of your 2019 Mazda CX-5 there is an underbody trim piece that needs to be removed when installing the Draw-Tite Class III Trailer Hitch # 76138 (this is the case with the other Class III hitch available for your vehicle as well). This is really just a long plastic piece that simply gets popped off with a flat-head screwdriver. It isn't difficult at all and it won't affect the integrity of the rear bumper on your Mazda. It's essentially a minor...
    view full answer...
    Image 1 for
  • Does Rear Bumper of 2019 Mazda CX-5 Get Trimmed to Install Trailer Hitch
    If you have a GT 2019 Mazda CX-5 GT model you do have to remove a lower rear panel but there is no trimming or cutting required to install the 76138. If you had a non-GT model there wouldn't be anything that would need to be removed. I attached a picture that shows what needs to be removed.
    view full answer...
    Image 1 for
  • Hitch Recommendation for 2016 Mazda CX-5 For Carrying Scooter Carrier
    The great thing about the 2016 Mazda CX-5 you are interested in is that it has much higher capacity hitches made for it like the Draw Tite part # 76138 that you referenced which has a tongue weight capacity of 675 lbs. This hitch will also sit higher than a hitch for a 300 too so you wouldn't have the ground clearance issues either.
    view full answer...
    Image 1 for
  • Determining Correct Trailer Hitch for 2016 Mazda CX-5
    The installation process will vary slightly depending on whether you have the 2016 or the mid-year 2016.5 model Mazda CX-5 but the available trailer hitches themselves will not change. For whichever model 2016 CX-5 you have the Draw-Tite Class III Max Frame Trailer Hitch # 76138 that you were looking at will work perfectly. I really like this hitch because of its hidden crosstube design that allows for a sleek OEM appearance where only the 2 inch receiver is visible behind the vehicle....
    view full answer...
  • What Rear Trim Piece Needs to be Removed to Install Draw Tite Hitch 2018 Mazda CX-5 Grand Touring
    On your 2018 Mazda CX-5 Touring model there is a trim piece on the bottom center of the rear bumper area, about 2 feet, long L-shaped, and held in place by two push pin connectors. This trim piece must be removed to install Drawtite Hitch #76138. It cannot be reinstalled as the hitch fills the area under the bumper it is affixed to. See attached picture.
    view full answer...
    Image 1 for
  • Recommended 2 Inch Trailer Hitch for 2018 Mazda CX-5
    Yes we do! For your 2018 Mazda CX-5 I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 76138. This Class III hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. It will provide you with the 2 inch receiver you're needing for your bike rack and it has a 675 pound tongue weight capacity. I have attached an installation video on the 2017 model CX-5 that you can use for reference.
    view full answer...
  • Would Draw Tite Hitch for 2018 Mazda CX-5 Have to Come Off to Install Exhaust Isolators
    In the install instructions for the Draw Tite hitch part # 76138 which is a fit for your 2018 Mazda CX-5 the exhaust isolaters get reinstalled after the hitch is bolted into place. This means you would not have to remove the hitch to get to the isolators. It's actually the last step before reinstalling the rear fascia so you'd pretty easily be able to install them.
    view full answer...
  • 2 inch Trailer Hitch Recommendation for 2018 Mazda CX-5
    For your 2018 Mazda CX-5 the 2 inch trailer hitch I would recommend is the Draw Tite part # 76138. I recommend this hitch because it has the highest towing capacities available and because only the hitch opening hangs below the rear bumper so it's mostly hidden.
    view full answer...
    Image 1 for
  • Weight Capacity for Hitch to Use with Bike Rack on 2018 Mazda CX-5
    Based on my research it does look like your 2018 Mazda CX-5 features a tongue weight capacity of 200 pounds. You are always going to be limited by your weakest link so regardless of the rating for the trailer hitch you install you will need to adhere to the vehicle's 200 pound limit. The Draw-Tite Class III Max Frame Receiver Hitch # 76138 is what I recommend for your Mazda CX-5. This will provide you with a 2 inch receiver opening perfect for hitch-mounted accessories like a bike rack...
    view full answer...
  • Installation of Draw-Tite Hitch # 76138 on 2016 Mazda CX-5
    I've attached a video of the installation of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76138. In the video our installer uses a 6 inch extension but he does reference that you can use a swivel socket adapter or another option is a wobble extension. You can find either of these options at any home improvement store and at most auto parts stores as well. The installation instructions show the swivel socket also known as a universal joint socket as optional...
    view full answer...
    Image 1 for
  • Weight of the Draw-Tite Max-Frame Trailer Hitch Receiver Part # 76138
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76138 which is a confirmed fit for your 2013 Mazda CX-5 weighs approximately 25 lbs. I have attached an install video for you as well if you have not yet installed it.
    view full answer...
  • What Is The Ground Clearance Measurement for the Draw-Tite Hitch 76138 on a 2018 Mazda CX-5
    The distance from the ground to the top inside edge of the receiver tube on the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76138 while installed on a 2018 Mazda CX-5 is around 12-1/2". If you wanted to know what the distance is from the ground to the bottom of the collar on the receiver tube opening then you would subtract around 2-1/2" which would bring the ground clearance measurement to around 10". Please note that these measurements will not be exact as they can vary slightly...
    view full answer...
    Image 1 for
  • Does Rear Fascia of 2019 Mazda CX-5 Need to Remove to Install Draw Tite Trailer Hitch
    Only the Grand Touring version of the 2019 Mazda CX-5 needs to have an appearance panel permanently removed from the underside of the vehicle to install a hitch like the # 76138. The standard 2019 Mazda CX-5 does not require this. Basically the panel is there to make the underside of the vehicle look sleeker. It's not needed aside from that.
    view full answer...
  • Do the Exhaust Hangers on a 2019 Mazda CX-5 Need to Be Removed for the Draw-Tite Hitch 76138
    In order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76138 on your 2019 Mazda CX-5 you will need to lower the exhaust by removing the metal exhaust hanger studs from the rubber isolators. This can be done with the isolators left on the muffler side or on the vehicle side, it does not matter which you choose but I find it easier to leave them on the muffler side. In order to remove them you will need to spray a bit of lubricant inside the rubber and then you can use...
    view full answer...
  • Trailer Hitch Receiver for 2017 Mazda CX-5 Compatibility with 2018 Model
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76138 is a confirmed fit for the 2017 Mazda CX-5, but the manufacturer has not confirmed a fit for the 2018 model year yet. I called my contact and they have not tested a fit simply because they haven't had that model in yet to check. If your dealer is correct then it will work, but unfortunately I can't confirm a fit for your 2018 model yet.
    view full answer...


< Previous
123. . .8



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Randy B
Test Fit:
Randy B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924