bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 76209
lowest price pledge
Retail:$314.89
Our Price: $182.22
You Save: $132.67
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 37 lbs
Quantity: 
In Stock
Draw-Tite Visible Cross Tube Trailer Hitch - 76209
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right for you? Product Expert Kathleen M says:

Yes, if you:

  • Hate running your wiring out the back hatch and want a welded-on bracket to make it easy to attach right by the hitch
  • Use a platform bike rack for hauling a bunch of bikes or a cargo carrier for heavy gear and need a hitch that can handle all that tongue weight

No, if you:

  • Prefer a hidden cross tube so there's not much visible change to your Subie
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 76209 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (267)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 76209

  • Class III
  • 2 Inch Hitch
  • 4500 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 675 lbs TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Integrated mounting point lets you attach a bracket for a 4-way or 7-way plug (sold separately)
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,500 lbs
    • Maximum tongue weight: 675 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76209 Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Installation Details 76209 Installation instructions

This Product Fits The Following Vehicles


Weight Carrying Capacity
Gross Towing Weight (GTW):
4,500 lbs.

Tongue Weight (TW):
675 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Exhaust must be temporarily lowered for installation




California residents: click here



Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76209

Average Customer Rating:  4.7 out of 5 stars   (267 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

This hitch is very well made, very solid, and capable of towing more than my car will handle. So far, though, I have only used it to hold a bike rack, which is my primary reason for buying this rack. I no longer need to lift bikes to the rooftop. I like that it also will accept 1/2 inch and 5/8inch hitch pins. After a year, it does have a couple rust spots underneath on some sharp angles where the paint has flaked off.


Comments
Solid hitch. Ive used it so far only to attach my Kuat bike rack. I did take the bikes up some rugged 4WD roads and it was very tight. Kept the bikes from moving around at all. Quite pleased so far. Should have ordered the wiring harness when I ordered the hitch.
Tim Y - 08/28/2021



by:
2023 Subaru Crosstrek

Picked because I didn’t want any filing or grinding. Not happy with finish on hitch. Lots of bubbles in visible spots (hitch is very visible).
Shipping could be better. This arrived with several spots of paint damage where paint was completely scraped down to raw metal. Also a few scratches. Will require sanding and refinishing.


Comments
Im sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.
Katrina B - 08/29/2022


by:

The hitch itself is great! I was very pleased it was available in 2” not 1.25”.The primary reason for wanting to install this hitch on my 2019 Subaru Impreza was so I can switch my bike rack between vehicles. The installation was a bit challenging not because of the design of the hitch but the design of the car. The hitch is well made and perfect for my intended use.




by:
2018 Subaru Crosstrek

After shopping around went with the Draw-Tite hitch based on reviews and great price from etrailer.com. Hitch arrived earlier than estimated and installation was simple with the provided instructions. The installation videos were key in making the install go smoothly with a couple tips that came in handy. Couldn't be happier with the finished product which is providing more than enough support/security for a 2" Yakima Holdup bike rack


Comments
A year later and hitch is as solid as when installed. No hassle, no worries.
StevenB - 02/06/2019


by:

First, my order was delivered very quickly, within a few days. etrailer is a great company to do busyness with.
Secondly, about my purchase. the Draw Tite hitch fits perfectly. The instructions are very accurate and easy to flow. I installed the hitch by myself in the driveway. It took me about 1.5 hours from the start to all tools cleaned up and put away.


Comments
I am very happy with it
Robert - 05/29/2022


by:

This hitch is great. I have had it for a year now and have not yet pulled anything super heavy but i have placed a bike rack on it and it had done a great job with that.




by:

Works great, looks good. I installed it myself with the use of a floor jack to hold most of the weight up while I fiddled with the mounting hardware. I've only used it for light duty operations on my 2019 Crosstrek - bike carrier, cargo carrier and truck bed extender used vertically to hold the back of a long kayak. 1 year later hardware is still tight and no rust. 5 stars.


Comments
Still great. No issues at all.
Allan K - 05/21/2021


by:

Installed the hitch in just under an hour. Went on just as the instructions said it would. Everything from the ease of ordering, to the on time delivery to the videos and instructions was great. Would guy recommend etrailer!

Heading out this weekend with the mountain bikes and can’t wait!


Comments
The hitch has been great. Granted, I use it for a bike rack and a cargo box. No issues.
Robert F - 03/20/2020


by:

Great looking hitch, well made. Installation was not technically difficult. My only complaint: the supplied instructions could be clearer. If I had to do it again, I’d just go ahead and take the muffler off first. Also, those little coiled wires you use to pull the bolts through the frame? Leave those on the bolts, thread the wire through the holes in the hitch, and use them to keep the bolts form being pushed back into the frame when you’re mounting the hitch. A floor jack comes in really handy.




by:
2021 Subaru Crosstrek

This thing is solid and very well built, I have no doubt. I installed it on a 2021 Crosstrek. The reason I’m giving a 4/5 is that compared to the Curt class 3 hitch that I installed on a 2018 Crosstrek dropping the exhaust was required. The second reason is that trying to get to the rear most bolts is a pain. You must have a universal joint and a long extension, and it had to be on a 1/2 socket because the bolt started to stick out to much to get a good grip on the nut with the 3/8 I was using due to tight space.


Comments
Year later, no problems
Richard - 02/26/2022


by:

This review is about the installation process, which did not go without a hitch. one of the 4 nuts that are used for mounting was too large. I had to interrupt installation so I could buy a 7/16-14 nut. Otherwise, installation was easy.


Comments
I am sorry you had to go about making your own solution. When replacing any nuts or bolts, please make sure that they are 5 to 8 grade bolts.
-- Etrailer Expert Katrina B - 06/20/2022


by:

Great product, little overkill on my subaru impreza hatchback but works great, took me longer than recommended installation time. I really needed the right tools to disconnect the exhaust, and a taller lift, would have been so much easier to install, can't wait to get a light storage rack/bike rack




by:
2018 Subaru Impreza

I debated on the evo hitch or this one due to a cleaner look and a little better ground clearance on my Impreza. I chose to go with this one and it does the trick. I watched the video on how to install it and was able to install in about 30 minutes. My particular car didn’t require grinding to allow the hardware to fit. I have a 2018 and installed this by myself in my driveway. I chose to take the 2 14mm bolts out of the exhaust and remove it out of my way. I used a floor Jack to raise the hitch into place while I fed the hardware into place. Watching the video provided on the product page made a huge difference and eliminated a lot of reading and guessing. The fitment is perfect and it came with everything necessary to install. Shipping was fast, even though UPS beat up the hitch a little bit. Definitely pleased with the company, hitch and up to date information on my order.




by:

Whenever I need something for my towing needs, I always come to etrailer. The video for this install was especially helpful, don't skip the step of lowering the exhaust out of your way. I purchased two of these last year and they have been an incredible addition to the vehicles allowing for towing and carrying of bikes.




by:
2018 Subaru Crosstrek

Ordering was easy with online tools. Received the hitch very quickly, before expected. After watching the video telling us how to install, installation went very smoothly. Able to install in well under 1 hour. Haven't used it, installation looks good, as in the picture. Will try it soon.


Comments
Still love the Drawtite hitch. It was easy to install and is a great hitch.
Wayne - 06/18/2019


by:

Really easy install when you have an extra person to lift it into place. I didn’t have to remove or lower the exhaust but, I did have to remove the left rear wheel panel to have a bit more space for maneuvering the hitch. I thought I was going to need to enlarge the hole like most of the videos showed but I didn’t have to for my install it fit perfectly!




by:
2018 Subaru Crosstrek

Your installation videos sold me on your product, but the actual installation went even easier than I envisioned. The Draw-Tight trailer hitch worked perfectly for my vehicle.

And after paying for trailer hitches to be installed for many vehicles, this is the first time I installed one myself and saved a significant amount doing so. For anyone with basic mechanical skills, a torque wrench and a basic socket set I highly recommend your company and the hitch and wiring harness I installed.

Accompanying photos might help someone else.


Comments
Quite pleased with hitch, perfect for my Crosstrek.
David R - 05/04/2019


by:
2019 Subaru XV Crosstrek

Hitch arrived pretty darn quick and I loved the email updates and follow-up! There was some marring to the stickers on the hitch so I opted to remove them (except for the safe load sticker of course!)
I installed the hitch on a 2019 Subaru Crosstrek Hybrid.
I installed this hitch by myself, with no jack, on a dirt road, with limited lighting in about 1.5 hours- it wasn't' easy but as someone who turns wrenches frequently, its do-able. I didn't have to lower/adjust the muffler in any way but if I had the Crosstrek on a lift I can see how this would make the install easier (but would have taken a bit longer.)
A 2nd set of hands would have made the job easier, but that wasn't an option. What proved incredibly valuable was having a prop/bucket to place the opposite end of the hitch on while fastening one end. The weight of the hitch isn't as much heavy as it is awkward with only one person. Using temporary line to suspend the hitch in places would have made the fastening go a little quicker.
The install videos are well made and thought out!


Comments
I recently sold this car ultimately the car just didnt have the towing power I needed but the hitch performed great the year I had it!
Patrick S - 09/21/2020


by:

Fits great, but the bolts need to be just 1/4" longer. It was a 15 minute job that took me way too long because I had to fight to get the washer and nut both on.




by:

Great hitch, about two hours start to finish. The hitch is very strong but the car is not. DO NOT TRY TO PULL ANYTHING!!! Great as a bicycle or cargo rack receiver but again this is not the vehicle to use for towing anything as the unibody frame the hitch bolts up to is very thin and I fear it will just break free if you stress it to much. Again a great hitch if you are not going to pull a trailer. Only used a handful of wrenches 14mm X 2 and 11/16" for the main bolts. I removed the muffler altogether rather than do it the way shown in the video of lowering it on a ratchet strap. Only two bolts and three rubber hangers. I did not use ant type of lube on the rubber muffler hangers as oil and rubber are not a good mix. With just a little effort the muffler came loose. The other thing that makes this hitch stand out from the other options is that you do not have to drill or enlarge any of the original holes in the cars frame. VERY GOOD FOR A BICYCLE OR CARGO RACK BUT DO NOT TRY TO PULL ANYTHING BUT A VERY LIGHT TRAILER!!!! THE CAR IS NOT MADE FOR IT.


Comments
According to Subaru, the Crosstrek has a 1500 lb towing capacity. Although the hitch has a higher capacity, youll be limited to the capacity of the lowest rated component which is the vehicle in this case.
-- Etrailer Expert Mike L - 07/08/2019


by:
2019 Subaru Impreza

Installed it on my 2019 Impreza and it looks great took me 1hour to install. If I have the proper tools probably take me 20 min. I did not have to shave the hole to make it bigger to install the mounts...great hitch!!!!


Comments
I would not recommend this hitch for impreza. The hitch is to low and if you hit a small bump it bottoms out and hits the bump. Another thing if you use a bike rack the angle of the hits makes it even lower when you get in parking lots that is angled you will bottom out. For impreza owners I would not recommend it. Its been a year for me and I removed my bike rack because I cant use it because it is to low. I wish the sales rep when I talked to him would have recommend another 2” rack than this one.
Kent - 01/26/2020


by:

2019 Subaru Crosstrek. I did the install by myself and had to get creative. Fits great. Wish the bolts were a little longer, maybe 1/4” to help with holding them with a fingernail to start the nut. Instructions said to drop the exhaust but if you undo the two trim pins on the plastic on the drivers side, you can wiggle it up over the exhaust (see picture). I backed up onto 2x4’s under the rear wheels to lift up a little bit. If I used ramps, it would have been too high to reach the bolts easily in my opinion. Because the mounting holes were elongated, I lifted one side and attached one nut to hold it up and then did the same on the other side. I attached the easiest ones first with just a nut, then when the second bolt was through I’d put washer and nut on it and go back to the first (I know it seems kind of redundant but it was easier to contend with one nut at a time rather than 2). Once all the hardware was installed, I centered it and tightened. A second set of hands would be helpful with the lifting and holding in place, but once it’s up over the exhaust you can focus on one end at a time.




by:
2022 Subaru Crosstrek

From all the bad reviews on packaging I thought possibly issues would have been corrected but they have not. Every sharp corner on hitch penetrated box so there are several scratches. I have yet to install it.




by:
2019 Subaru Impreza

Would have gave it 5 stars if it sat farther up. Easy to install, took my buddy and I about 20 minutes without removing the exhaust. Just have to jack the car up high enough and wiggle it in from both ends. Also did not need to shave any metal off the holes to get the bolts into the holes as the video suggested.




by:

I've had zero issues with it. I can't speak to installation because I brought it to a shop to have them do it better than I would, but they had no questions or comments about the process.



25
267
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch



  • Does Trailer Hitch for 2018 Subaru Crosstrek Require Frame Modification or Drilling
    To install the Draw Tite hitch part # 76209 that you referenced on your 2018 Subaru Crosstrek does not require any frame modification or drilling to install on your 2018 Subaru Crosstrek. This is especially nice when the vehicle is leased and modifications aren't allowed at all.
    view full answer...
  • Distance from Ground to Hitch Opening of Draw Tite Hitch for 2018 Subaru Impreza Wagon
    When we installed the Draw Tite Hitch part # 76209 on a 2018 Subaru Impreza Wagon just like yours we found the height from the top of the trailer hitch opening to the ground measured 10 inches. So what you'll need to do is measure from the bottom of your trailer coupler lip down the ground when it's sitting level and whatever the difference is what rise/drop you need. I also attached a help article that details how to determine the needed rise/drop as well for you to check out.
    view full answer...
    Image 1 for
  • Best Trailer Hitch Capacity for 2019 Subaru Crosstrek
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76209 is rated as the strongest capacity for your 2019 Subaru Crosstrek. This hitch is rated for tongue weights up to 675 lbs and towing capacity of 4,500 lbs. This will be rated above your vehicle based on the manufacturer specs so you will want to stay within their limits for your vehicle, but you definitely will not be limited by this hitch.
    view full answer...
    Image 1 for
  • Best Trailer Hitch Recommendation for 2018 Subaru Crosstrek for Carrying Bike Rack
    The best hitch for your 2018 Subaru Crosstrek for carrying a bike rack is the Draw Tite part # 76209 as it does not require using a stabilizer strap with a non-supported load like a bike rack like the Curt hitch does. But to your specific question on stability there isn't a difference between the hitches. It's the hitch accessory's ability to prevent movement/rattle that prevents the movement. The hitches in that regard are perfectly equal. With your T2 one trick is take and move the...
    view full answer...
  • Installation Instructions for Trailer Hitch on 2019 Subaru Impreza Hatchback
    Installing the Draw-Tite Trailer Hitch # 76209 that fits your 2019 Subaru Impreza hatchback is a straightforward process that won't require any special moves, as you can see by the cut out of the linked installation instructions I added. To put this hitch on your '19 Impreza you are going to need to lower your muffler by removing its rubber hangers, but after you accomplish that it will be smooth sailing. There are a couple of rubber plugs on the bottom of the frame (these will be pretty...
    view full answer...
    Image 1 for
  • Are 1-1/2 Bolts Included W/ Draw-Tite Trailer Hitch Receiver 76029 Too Short To Install?
    While the 1-1/2" bolts included with the Draw-Tite Trailer Hitch Receiver # 76209 you were looking at for your 2021 Subaru Crosstrek sound short, only the front two bolts will use the spacer between the hitch and the frame, and will be roughly flush with the end of the nut. This is how Draw-Tite designed and tested the hitch, and was done to keep excess thread from sticking down. I included a video of the # 76209 being installed to show you exactly how the bolts will work when installed.
    view full answer...
  • Does Bumper Need to be Cut to Install Draw-Tite Hitch on 2019 Subaru Crosstrek
    I have good news! The Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 that you referenced is going to be a complete bolt-on installation and it doesn't require any kind of cutting or trimming with regards to the bumper fascia. The only step outside of actually lining up the hitch to the frame and tightening the hardware is that you will need to temporarily lower the exhaust so the hitch can get into place. I have attached an installation video that you can also use for reference....
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2020 Subaru Crosstrek Plug-In Hybrid PHEV
    Yes, for your 2020 Subaru Crosstrek Plug-In Hybrid I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 that's confirmed to fit and will work perfectly. This durable hitch features custom brackets that line up to existing holes in the Crosstrek's frame rails, allowing for a simple bolt-on (no-drill) installation. It sports a 4,500 pound towing weight capacity and 675 tongue weight limit, both of which represent the highest ratings available for this vehicle. All the...
    view full answer...
  • Class III Trailer Hitch that Fits 2020 Subaru Impreza Wagon
    Yes we do have a Draw Tite Class III hitch part # 76209 that fits your 2020 Subaru Impreza Wagon! This has plenty of towing capacity and a 2 inch opening. I attached an install video for this for you to check out as well.
    view full answer...
    Image 1 for
  • Correct Draw-Tite Trailer Hitch for 2020 Subaru Crosstrek Hybrid
    The correct trailer hitch for a 2020 Subaru Crosstrek Hybrid is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76209.
    view full answer...
  • What is the Shipping Weight of the Draw-Tite Max-Frame Trailer Hitch Reciever
    The shipping weight on the Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is 37 lbs. If you are planning on towing or carrying a bike rack, I would be happy to recommend a bike rack, trailer wiring, ball mount, and tow ball if you can let me know how you intend to use your hitch. Included is an installation video for this hitch on a 2019 Subaru Crosstrek.
    view full answer...
  • What Year Subaru Crosstrek Will the Draw Tite Class lll Hitch 76209 Fit
    The Draw-Tite # 76209 hitch will actually fit a Subaru Crosstrek from 2018 to 2021, so you are good to go. I included an install video we did with this hitch on a 2019 for you to check out as well.
    view full answer...
  • Does the Draw-Tite Max-Frame Trailer Hitch Receiver Fit 2020 Subaru Crosstrek Hybrid
    Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 that you ordered is confirmed to fit your 2020 Subaru Crosstrek. This can be confusing since it is listed for the Hybrid and "excluding Hybrid." All that means is that this fits the Hybrid as well as everything else that isn't the Hybrid. I have attached an installation video for your reference.
    view full answer...
  • Will There be Ground Clearance Issues with Installing Draw Tite Hitch 36644 on 2018 Subaru Impreza
    We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part # 36644 that you mentioned. When we installed the 2 inch hitch part # 76209 on a 2018 Impreza like yours we found that it had 10 inches from the top of the hitch opening down to the ground when installed. So from the bottom of the smaller hitch size to the ground would be right at 8-1/2 inches. Which doesn't seem like a lot, but since the rear axle...
    view full answer...
  • Recommended Trailer Wiring Harness to Fit the 2018 Subaru Crosstrek
    We have a few trailer wiring harnesses that fit the 2018 Subaru Crosstrek. I recommend the Tekonsha # 118467 because they always make quality products. It plugs into a connector that is located either behind a trim panel in the rear cargo area or in the spare tire compartment. Then you need to insert the provided fuse into the fuse holder. I've linked a video of the install on a 2017 model which is the same process for the 2018. If you also need a trailer hitch receiver I recommend...
    view full answer...
  • Ground Clearance Difference Between Class II and III Draw-Tite Hitches on a 2018 Subaru Impreza
    We haven't installed either Draw-Tite # 76209 or # 36644 on a 2018 Subaru Impreza so I can't tell you the exact measurements on your car but I went out to our warehouse (safety toe covers and all) and compared the two hitches. The lowest point of both hitches is actually the outside "wings" and not the receiver tube. Both of them are the same at about 10-1/2 inches from the mounting locations. The measurement at the reveiver tubes are about 1/2 an inch difference with the Class II, part...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2018 Subaru Impreza Wagon
    For your 2018 Subaru Impreza wagon we have the Draw Tite hitch part # 76209 as a confirmed fit. This is a 2 inch hitch which is the more popular size. It also has higher capacities than the smaller size and has more accessories made for it. I attached an install video for this hitch for you to check out as well. For wiring you'd want the part # 118744. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4...
    view full answer...
  • Trailer Hitch Recommendation for 2018 Subaru Crosstrek
    The Draw Tite hitch part # 76209 is a confirmed fit for your 2018 Subaru Crosstrek and would be a great option! For trailer wiring you'd then want the part # 118467.
    view full answer...
  • Weight of Draw Tite Trailer Hitch part # 76209
    The weight of the Draw Tite hitch part # 76209 that you referenced is 33 lbs. The towing capacities are: Maximum gross trailer weight: 4,500 lbs Maximum tongue weight: 675 lbs
    view full answer...
  • Will Draw Tite Hitch Fit 2018 Subaru Crosstrek with Aftermarket Exhaust
    The Draw Tite hitch part # 76209 that you have installed on your 2018 Subaru Crosstrek was only tested with the factory exhaust of your vehicle. I attached a picture of what this hitch looks like installed relative to the factory exhaust. It would appear that as long as the muffler at the rear of the vehicle is the same size or smaller it would fit without major modification. The exhaust tip location of the new exhaust could be an issue but that would be easier to modify than the location...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch and Wiring for 2019 Subaru Impreza
    Starting with the trailer hitch for your 2019 Subaru Impreza Wagon I highly recommend the Draw-Tite Class III # 76209 because of its robust weight capacities indicating a stronger unit than the alternatives and its 2" receiver, which opens the door to more accessories (bike racks, cargo carriers, etc) if you ever choose to use the hitch in this way down the line. The hitch itself will line up to existing holes in the Impreza's frame rails for a simple bolt-on (no-drill) installation and...
    view full answer...
  • Trailer Hitch Receiver Fit for 2019 Subaru Impreza Sedan
    I can understand wanting a larger trailer hitch receiver on your 2019 Subaru Impreza sedan, but I double-checked with our hitch manufacturers for you, and the only hitches that fit your sedan are the Class I options with a 1-1/4" receiver: - Curt Trailer Hitch Receiver # C11466 - Draw-Tite Trailer Hitch Receiver # 24960 These are both really good options for a hitch that are sturdy and well-built so they'll both the job done for you. I have added links to the installation instructions...
    view full answer...
  • Does Draw-Tite Trailer Hitch Receiver Fit 2019 Subaru Crosstrek Hybrid
    I was able to confirm with Draw-Tite that they do have a trailer hitch receiver which is a confirmed fit for your 2019 Subaru Crosstrek hybrid, which is the following hitch: - Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 This is a Class III hitch with a 2" receiver and is a complete bolt-on installation so you don't have to do any type of drilling into the frame of your Subaru. I also wanted to add, in case you were going to do some light towing and needed a trailer wiring harness,...
    view full answer...
  • Recommended Trailer Hitch for 2019 Subaru Crosstrek Hybrid
    To add a hitch to your 2019 Subaru Crosstrek Hybrid, Draw-Tite is the only manufacturer who has confirmed a hitch for the hybrid models, so you can use either the Draw-Tite # 36644 (1-1/4" receiver) or # 76209 (2" receiver). Unless you already have a bike rack with a 1-1/4" shank, it's likely going to serve you better over the long term to go with the 2" receiver # 76209 since it will give you more options to choose from when it comes to bike racks and also other hitch mounted accessories. I've...
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Updated by:
Kathleen M
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Michael B
Video by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-833-496-1390