bing tracking image
  1. Trailer Hitch
  2. Kia
  3. Sorento
  4. 2011
  5. Draw-Tite
FITS 2011 Kia Sorento
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Our Price: $177.49
You Save: $133.94
Trailer Hitch
Confirmed to Fit
2011 Kia Sorento

4-cylinder models

EX V6 with Factory Tow Prep Package

EX V6 without Factory Tow Prep Package

LX V6 without Factory Tow Prep Package

SX V6 with Factory Tow Prep Package

SX V6 without Factory Tow Prep Package

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 45 lbs
75684 - 350 lbs TW Draw-Tite Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos


Need help with installation?
Locate installers near me
Call at 1-800-496-5010 for expert service. We are your Kia trailer hitch experts, and offer a lowest price guarantee. carries a complete line of Draw-Tite products for your Kia Sorento 2011. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part 75684 from Draw-Tite can be ordered online at Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (433)
  • Q & A (0)
  • Photos
  • Why etrailer?

2011 Kia Sorento - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • Class III
  • 2 Inch Hitch
  • 3500
  • Draw-Tite
  • Visible Cross Tube
  • 350
  • 5000 lbs WD GTW
  • 500 lbs WD TW
  • Custom Fit Hitch

Fully welded Kia Sorento trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

75684 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87574 Hidden Hitch Class 3 Trailer Hitch Receiver

Item # 75684

Installation Details 75684 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
350 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
500 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

Trailer wiring 118506 will not work on SX models. No drilling required for installation

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75684

Average Customer Rating:  4.8 out of 5 stars   (433 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Nice unit. Easy to install, hugs the bottom of the bumper, so it's not too low. Highly recommend if you want to tow with your Kia Sorento.


Ordered this hitch so a 2 ebike rack can be installed on my 2011 Kia Sorento. My husband was able to install the hitch within two hours and he was very impressed with the quality of it.


Installation was straight forward and only required cleaning the factory installed threads in the car frame (due to the age of the vehicle) prior to inserting the bolts. The wiring harness worked perfectly and was clearly explained by the included instructions. The ball and hitch fit properly and have performed as expected.


The hitch receiver was much thicker and heavier than I expected. It's sturdiness was a nice surprise. It fit my vehicle perfectly as advertised. The biggest challenge was re-tapping the the bolt holes on my 12 year old vehicle as they were quite rusty! Fortunately the tapping evolution went well and the hitch mounted very securely. Very satisfied.

2010 Hyundai Santa Fe

I installed hitch frame, wiring harness (tow package version), and 4-pole flat mounting bracket on my 2010 Hyundai Santa Fe. The hitch frame is very well made our of heavy gage steel with good looking weld beads. The fit is good and all of the holes line up perfectly. However, there were challenges. First cleaning the weld-nuts: Because of the age of my SF and 10 mid-Atlantic winters with salt and snow the weld-nuts were rusty and blocked. I nearly took it all to a mechanic. However, after watching the video about cleaning the weld nuts I saw that I should be able to do it myself. In addition to a nylon tube brush and WD-40 I also used a brass tube brush and a dental pick type tool. The dental pick was used to scrape thread grooves enough to get the bolt to catch. Once I caught the thread I carefully turned the bolt and couple of times, making sure it was not cross threaded. At that point I applied the air wrench and got the bolt home. In all it took me almost two hours to clear the four bolts. At the beginning I did unhook the rear most rubber muffler hanger for better access. Mounting the hitch frame: I was working alone so I used two small jack stands to support each side of the frame, wooden blocks were placed under the center. Once the frame was on the stands it was pretty stable. I then inched the stands up (they have ratcheted posts) and added blocks under the center until the mounting holes were close to the car frame. The hole alignment is very good and I was able to easily bolt the frame on. The only remaining thing to do was torque the bolts to 59 foot pounds. Remember to reconnect the muffler hanger.

Great. Pulled a heavy, enclosed 5x8 U-Haul trailer from Maryland to California. No problems.
Ted L - 12/14/2021


Easy mount to our KIA for our basket. Completed our camping trip with no issues Thanks for your great customer service assisted in making sure it was the correct frame

2014 KiaSorento

I have used Hidden Hitch before and have yet to be disappointed. Great, reliable products as far as I am concerned. Installation on my wife's 2011 Kia Sorento SX was straightforward. The muffler position added a degree of difficulty, but with the help of my 14 year old, it was on in under an hour.
I have had only two shopping experiences with but recommend them without hesitation. Great prices, great customer support, great follow-up, easy to find what you need, and easy to buy.

How do you lower the spare tire with the hitch frame on?
-- comment by: Will - 02/23/2014


Simple installaction, went in just like the online video showed. Had my 14 year old grandson help lift it in place. It's easier with 2 people, but not impossible for one. Took about 90 minutes to do the hitch and wiring, could have done it quicker if I had wanted to. Was not difficult at all and a very good product. Dealer wanted $700 to install a hitch and wiring, you saved me $450. Thank you.

Patrick, Good afternoon. I still love the hitch. Have had no problems at all. I have attached a picture of us in Atlanta getting fuel on a trip last summer from Jacksonville, FL to Bismarck, ND. The trailer pulled straight and all lights worked. Thanks to the great product your company provides. Thanks again.
VWLarry - 01/28/2015

2012 Hyundai Santa Fe

i been hauling my keyboards and amps. in the back seat of my car for years, then i decided to buy me a small utility trailer to haul then in, i ordered my hitch on Sunday night and it was delivered to me on the following Wednesday morning, i had it installed the say day, and it took a couple young men maybe 20 minutes and the job was done, it looks very neat on my car and you don't know it's even there until you look for it, i am very happy that i chose etrailer, thank you so very much. Russell M.

I am so surprised it has been a year ago, but everything is working out just fine, and will contimnue to use this set up, thanks again , Russell
Russell M - 01/28/2017


A lot easier than I thought. Installed the hitch on my 2011 Kia Sorrento to hold a carrier for my snow blower. Did it by myself without raising the car. Plenty of room. After getting together everything I needed, scratching my head and thinking things over, lowering the muffler, cleaning the rust from the holes and installing the hitch, it took 1 1/2 hours.

Lowered the muffler by prying the 3 rubber grommet things off (WD40 will help). Need to do this to get to the two bolts on that side. Also sprayed WD40 in the 4 threaded holes that are already in the frame and used a small wire brush to clean out rust.

Raised the hitch, on both sides, by putting it on cement blocks and wood 'til it was close enough to get the bolts (included) started. Started one bolt (do not tighten all the way). Moved over to the other side and installed the other two using a ratchet with 5/8" socket and the back to the other side and finished those two. That's it.

Remember to reattach the muffler back to the rubber grommets. Added an American Flag cover (also from etrailer) into the receiver :)

2013 KiaSorento

I just installed the trailer hitch. I haven't towed anything yet but the installation wasn't bad. I didn't use a jack or anything.

TIP: Install the side of the muffler first. You will need to move the exaust to get the hitch bracket in and bolted. You can move it with your hand long enough to start the bolt. You will need a support or a helper to hold the other side. The product is solid and heavy. Installation took me 2 hours by myself. I would recomend that you spray the bolts and holes with WD-40.

2012 KiaSorento

Order was reasonable priced, arrived quickly, and was an excellent fit to my vehicle. Well played all!!!


The hitch is exactly what you expect it to be from the description provided by etrailer. The packaging from etrailer was surprisingly poor (see photos, this is how it was delivered). There is no way the box used could fit the hitch without tearing through the box, so it's funny that they send it this way. That said, other that a scuff hear or there, the packaging didn't really effect the hitch, it's a big sturdy piece of steel.


This hitch worked out as expected. Great service from etrailer in answering all the questions i had.


Great Price, easy installation, worked great!! Picture shows a trailer hitch cover that was purchased separately :-) Highly recommend this company and their products.

what about wiring harness do you have a video on that, Installation and Price
-- comment by: Jesse s - 07/27/2013


The hitch arrived Thursday. I ordered it Tuesday. Having been over the videos and instructions, I had WD-40 and my battery terminal brush handy. They were not enough. I live in Wisconsin and drive a lot of dirt and sand roads, and Wisconsin uses corrosive salts to melt snow on the highways. First trip to the store resulted in the purchase of a .410 bore brush. That helped a lot, but not enough. Next trip to the store resulted in the purchase of a tap and die kit. $25 bucks for the set, and that made the difference. It was easy to clear the threads on the driver's side, but the muffler was in the way on the passenger side. I know, the videos show the heat shield and muffler moved over, but I don't have a tool for removing the hangars and was doing this job alone, in my gravel driveway. A large block of wood wedged inside the body pushed the muffler over enough that I could put a small wrench on the tap and get the threads clean on the passenger side. Then I pile 2x6 blocks and a few 1x's and managed to shim the whole unit into position. Threadlock was applied to the bolts and they were driven home with relative ease. I don't have powertools, jacks, ramps, or friends, so I suggest being nice to people who have that stuff and getting a little help. Installed in 4 hours, with most of that either driving or cleaning the holes. I think the actual bolt-on process took me about 40 minutes. My butt is kicked, but I beat the heat, the sun, the bugs, and the installation! Thanks etrailer. Tomorrow the bike rack is going in the I am off to the cabin!


Great product . Just a little difficult to install by myself. It would have been easier with another set of hands but I managed it. Uesd it a lot to move to a new house.

2011 Hyundai Santa Fe

Watched install video first. Reminded me to clean out weld nuts. Blocked the hitch up into position and it bolted right up. The muffler side was tight to work around but manageable. This hitch is way overkill for out #300 sailboat and trailer but was the least expensive.


Connected everything perfectly . No installment issue. Trailer hitch and wiring harness perfect match for my vehicle. Thank you etrailer.

Pontiac Trans Sport Van

Works and looks great. Use it to transport bikes with my 1UP bike rack.

2012 KiaSorento

The hitch seems very sturdy. The box had a small hole but that was expected as this is a heavy and bulky item. The install seemed very easy but trying to get everything lined up took a few more minutes than i thought. I used some bricks and a jack and got everything lined up and bolted in. I would suggest screwing in the bolts a bit before you mount the hitch just to get a feel.


Easy install for my Kia Sorento. Works great for my bike rack.


Nice trailer hitch super well built Installed hitch on a 2012 kia sorento I liked the fact you dont have to mess with the spare tire or converter heat shield simple bolt on unfortunately sorentos are junk no real frame to bolt hitch to just sheet metal body my popup camper came loose on the highway but i was able to pull over without incident the left side two bolts on hitch pulled out of frame/body i torqued bolts to specs but these suvs without a real frame are a accident waiting to happen if you think your going to tow a small popup now i have a hitch i cant use i dont trust vehicles without frames. But i will say this, etrailer is the best place to deal with i have bought several hitches there. etrailer has the best well trained staff in the business I would never go anywhere else etrailer you're number 1

2011 Hyundai Santa Fe

I am very happy with the product. Once I clean the bolt holes from 6 years of build up it was very easy to install. I am currently using it for a bike rack and pulling a trailer. I will be occasionally pulling a boat with it.


Work good for Santa Fe 2012

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Class III Hitch Recommendation For 2013 Kia Sorento LX
    I recommend Draw-Tite Class III Max Frame Receiver Hitch part # 75684 for the 2013 Kia Sorento LX. However, the Draw-Tite hitch will not give you 500 lbs of tongue weight capacity. The highest rated hitch option for the Kia Sorento LX is 350 lbs. If you are carrying the wheelchair on a cargo carrier that will be considered all tongue weight because it's a downward force on the hitch. A better option may be to tow the wheel chair behind the Sorento on a small trailer so that you can get...
    view full answer...
  • What Size Thread Tap Is Needed To Clean the Trailer Hitch Weld Nuts on a 2011 Kia Sorento
    The weld nuts inside your frame are M10 x 1.25" which means you can use the tap included with the 10 mm x 1.25 Tap and 8.8 mm Drill Bit to clean them. When doing the above you will want to be very careful and only use hand tools as it will be super easy to cross thread the weld nut.
    view full answer...
  • Maximum Tow Capacity of 2012 Kia Sorento w/ 4 Cylinder Engine
    According to the owner's manual for your vehicle, the maximum towing capacity of the 2.4L 4 cylinder engine would be 1650 lbs. For the 3.5L 6 cylinder model, the maximum towing capacity is 3500 lbs if the trailer has brakes and the vehicle has a brake controller installed to operate them. The Draw-Tite # 75684 hitch you referenced has plenty of capacity at 3500 lbs, but because the vehicle's tow capacity is much lower the lowest capacity should be followed. You'd be best served by using...
    view full answer...
  • Troubleshooting Install Bolts of Draw Tite Hitch that Don't Want to Thread In 2011 Hyundai Santa Fe
    Although it is possible that you do not have the correct bolts, I believe you will find that they will fit just fine if you would clean the bolt holes before installing them. This a pretty common problem and in basically every situation cleaning out the weld nuts is all that's needed to get the bolts to fit. Try soaking those nuts that are welded into the frame with a spray lubricant such as WD 40. Let the lubricant sit for several minutes, then scrub thoroughly with a wire brush. The...
    view full answer...
  • Will Rear Hatch of 2012 Kia Sorento Open With a 24 X 60 Hitch Cargo Carrier Installed and Loaded
    A Class III 2-inch hitch like the Draw-Tite, part # 75684 for your 2012 Kia Sorento will have a towing weight capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. The tongue weight capacity is the amount of weight that can exerted down on the hitch receiver opening. It is usually 10 percent of the gross towing weight capacity of the hitch. If you use a hitch extender, it will decrease the tongue weight capacity of the hitch by 50 percent, since it will be moving the load further...
    view full answer...
  • Compatibility of Rola TX-103 59403 Bike Rack with 2012 Hyundai Santa Fe
    The Rola TX-103 is compatible with either a Class II 1-1/4 inch or a Class III 2 inch receiver, so it should be compatible with your 2012 Santa Fe. With either receiver size, the bike rack will offer 10 plus inches between the hitch pin hole and the closest upright portion of the rack, so it will work perfectly for you. The rack is capable of tilting rearward more than 45 degrees once the bikes are removed, so it'll clear your hatch with no problem. If you don't already have a hitch,...
    view full answer...
  • Is Drilling Required to Install Draw-Tite Trailer Hitch on 2012 Hyundai Santa Fe
    To install the Draw-Tite Class III Max Frame Receiver Hitch # 75684 that you referenced there are 2 bolts per side used for installation on your 2012 Hyundai Santa Fe. You will not need to drill any holes in the trailer hitch for installation, the bolt holes are already drilled in the trailer hitch. I have attached a photo that illustrates the pre-drilled bolt holes. The hitch will install into pre-drilled weld-nuts in the frame of your vehicle. You will not need to drill holes to install...
    view full answer...
    Image 1 for
  • Can Trailer Tongue Weight be Changed Just by Moving Weight Around in the Trailer
    The trailer tongue weight or hitch weight is dynamic meaning that it will change as weight is added or removed from the trailer or if the weight in the trailer is moved around (front to back). You can manipulate the tongue weight by moving weight more to the back of the trailer for less tongue weight or more towards the front for more tongue weight. However, the tongue weight should be 10 to 15 percent of the gross trailer weight. And when using weight distribution there are different...
    view full answer...
  • Troubleshooting Hard to Thread Install Bolts for a Hitch on a 2012 Kia Sorento
    Before we determine that you have the wrong size install bolts you need to make sure that the bolts not fitting isn't due to the weld nuts of your vehicle being dirty/corroded and that is why they won't fit. Typically on vehicles that have seen a few winters the weldnuts can be a bit dirty/corroded so bolts will not just thread right into them. Check out the links I attached that detail how to clean the weld nuts. The 10.9 on the bolt head is not the size of it.
    view full answer...
    Image 1 for
  • Will the Draw-Tite # 75684 Fit On a 2011 Kia Sorento with 18 Inch Spare Wheel and Tire
    As Long as your 18 inch spare wheel and tire are the factory original size spare wheel and tire combination then the Draw-Tite Class III Trailer Hitch, item # 75684, will bolt right up without lowering the exhaust or removing the spare tire. I have included a video of the installation of the 75684 for your review. If the 18 inch spare wheel and tire are not the factory size wheel and tire combination, the manufacturers of hitches do not test for the larger wheel and tire combination. I...
    view full answer...
  • Does the Exhaust need to be Lowered to Install Draw-Tite 75684 on a 2010 Hyundai Santa Fe
    According to the instructions, you will not need to lower the exhaust system to install the Draw-Tite item # 75684, on a 2010 Hyundai Santa Fe. It bolts up to the vehicle frame and fits around the bottom of the exhaust. I have added links to the instructions and an installation video for you to review.
    view full answer...
  • What Size Hitch do I need to Use a Hitch Mounted Bike Rack on a 2010 Hyundai Santa Fe
    Draw-Tite # 75684 is a Class III, 2 inch receiver hitch. There are more bike rack options available for this hitch size than any other. I have added a link to all of the bike racks we have that will fit this hitch. If you would like, you can write back with some information as to what kind of features you need in a bike rack and I can help go from there. Take a look through them and get a feel for what is available and let me know the kinds of things you would like in a bike rack and...
    view full answer...
  • Will the Draw-Tite #75684 Fit on a 2011 Kia Sorento SX
    Yes, one of my colleagues recently spoke with our contact at Draw-Tite about the 2011 Sorento SX model. He found that the Draw-Tite Trailer Hitch for the Kia Sorento, 2011, item # 75684, is designed to work on your vehicle as long as it does not have dual exhaust. The exhaust on dual exhaust models exits on the drivers and passengers side of the vehicle. I have included a link to the installation instructions, as well as an installation video of the 75684 for you to check out.
    view full answer...
  • Will the Trailer hitch for 2011 Sorento SX AWD V6 Work With Dual Exhaust
    By dual exhaust, the Tech tip means exhaust pipes on both the driver and passenger side of the vehicle. If you have two exhaust tips exiting on the passengers side of the vehicle the Draw-Tite Class III Trailer Hitch, item # 75684 will work on your vehicle. All three of the trailer hitches for the 2011 Kia Sorento SX will fit models with the single exhaust only, no matter the engine size. The Draw-Tite model, item # 75684, is designed to fit only the single exhaust models (the cross...
    view full answer...
  • What Class Hitch is on 2011 Kia Sorento EX with 1-1/4 Inch Hitch and 3,500 Pound Towing Capacity
    It sounds like the hitch you have on your 2011 Kia Sorento EX is a Class II 1-1/4 inch hitch with a 3,500-lb gross towing capacity. Your hitch will work with Class I and Class II accessories, such as bike racks and cargo carriers. All of the aftermarket hitches I have for a 2011 Kia Sorento are Class III 2 Inch hitches that have a gross towing weight capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. All of the 2011 Kia Sorentos with a tow package will come with a 4-Way trailer...
    view full answer...
  • Will Draw-Tite # 75684 Fit on a 2012 Kia Sorento SX with Dual Exhaust on the Passenger Side
    Yes, the Draw-Tite trailer hitch, # 75684 will work on the 2012 Kia Sorento V6 with two exhaust ports exiting on the passengers side of the vehicle. I attached a photo one of our customers with a 2011 Kia Sorento SX sent in for you to see and linked installation instructions also. If you have dual exhaust that has one exhaust port on the passengers side and one on the drivers side then this hitch will not work on your vehicle.
    view full answer...
    Image 1 for
  • What is the Maximum Tongue Weight Rating for the 2011 Hyundai Santa Fe V6 with 276 hp
    The highest rated trailer hitch that we carry for the 2011 Hyundai Santa Fe, is the Draw-Tite Trailer Hitch, # 75684, which has a 3,500 lb weight carrying rating and 350 lb tongue weight rating. With weight distribution this hitch is capable of 5,000 lbs and 500 lbs respectively. This means that as long as your specific vehicle is rated to tow at least the same amount of weight, you will be limited to the rating of the trailer hitch. If your vehicle is rated to tow less, you will be limited...
    view full answer...
  • Installation of Draw-Tite Class III 2-Inch Hitch # 75684 On 2010 Hyundai Santa Fe
    When installing the Draw-Tite Class III 2-Inch hitch, part # 75684 on the 2010 Hyundai Santa Fe, the mounting bracket bolts are above the muffler on the passenger side of the vehicle. The bolts are M10 x 1.25 and can be tightened with a torque wrench to the recommended torque settings listed in the instructions. If the bolts are hard to access you might try using a swivel head ratchet or wrench that will let you access the bolts. Also, in some hitch installations the removal of a rear...
    view full answer...
  • When Calculating Gross Vehicle Weight Do You Add in the Trailer Tongue Weight
    First of all, I don't know why they would tell you there is no tongue weight when using weight distribution because the tongue weight is still there. What you need to check is the owners manual for the capacities of your vehicle. When calculating gross vehicle weight you would add in the tongue weight of the trailer whether using weight distribution or not. There are different ways to calculate tongue weight. I have included a link to a help article for you that shows how you can determine...
    view full answer...
  • Trailer Hitch Recommendation for 2010 Hyundai Santa Fe that Keeps Full Size Spare
    The Draw Tite Hitch part # 75684 that you referenced has been confirmed as a fit for your 2010 Hyundai Santa Fe and would work just fine with your 18 inch spare tire. When raising and lowering the spare you will need to angle it slightly so that it can fit around the hitch cross tube, but it will work just fine. Check out the install video I attached as well. This is one of the easiest hitch installs as nothing needs to be lowered/removed prior to installation. A lot of hitches require...
    view full answer...
  • Is the Spare Tire Accessible After Trailer Hitch Install on a 2012 Hyundai Santa Fe
    After the Draw Tite hitch part # 75684 has been installed you will to angle the spare as you lower it to get it out so that it will clear the hitch cross tube.
    view full answer...
  • Can I Still Transport a Bike Rack on My Draw-Tite # 75684 With a Broken Bolt?
    I have a solution for you. If you are wanting to transport only a bike rack on the Draw-Tite # 75684 on your 2010 Hyundai Sante Fe, there is no way for sure to know if 3 out of the 4 bolts will be enough to withstand the weight of the rack and the combined weight of the bikes. Even though it will probably be OK for a single bike rack, I strongly recommend getting the fourth weld nut replaced/properly torqued before you proceed with testing it out. There is always the option to drill the...
    view full answer...
  • Trouble Installing Draw-Tite Receiver On 2011 Kia Sorento With Corrosion In Factory Threaded Insert
    As the Draw-Tite Max-Frame Trailer Hitch Receiver # 75684 was designed and tested using the threaded frame inserts, it is the only acceptable method for mounting the receiver to your 2011 Kia Sorento. You may be able to tap the holes with a M10-1.25 tap to clean out the threads and be able to mount the receiver. But in the event the threads are to far gone they would need to be replaced with new weld nuts.
    view full answer...
  • Hitch Hardware and Installation for Draw-Tite # 75684 on 2011 Kia Sorento 4 Cylinder Model
    For your 2011 Kia Sorento 4 cylinder, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75684 is a confirmed fit. The hardware that comes with this kit are designed specifically to fit the weld nut of your trailer frame. They are M10 x 1.25 x 30mm hex bolts. Because the weldnut is easily gunked up, I recommend using the Nylon Tube Brush - 1/2" # 814092 and some spray lubricant to clean the weld nuts prior to install. If all else fails you could go to an auto parts store and borrow a...
    view full answer...

< Previous
123. . .5

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.