bing tracking image
  1. Trailer Hitch
  2. Kia
  3. Sorento
  4. 2011
  5. CURT
FITS 2011 Kia Sorento
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13073
Retail:$240.98
Our Price: $191.36
You Save: $49.62
Trailer Hitch
Confirmed to Fit
2011 Kia Sorento

4-cylinder models

EX V6 with Factory Tow Prep Package

EX V6 without Factory Tow Prep Package

LX V6 without Factory Tow Prep Package

SX V6 with Factory Tow Prep Package

SX V6 without Factory Tow Prep Package

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 26 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-636-306-4830 for expert service. We are your Kia trailer hitch experts, and offer a lowest price guarantee. etrailer.com carries a complete line of CURT products for your Kia Sorento 2011. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part C13073 from CURT can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (308)
  • Q & A (0)
  • Photos
  • Why etrailer?

2011 Kia Sorento - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • Class III
  • 2 Inch Hitch
  • 3500
  • CURT
  • Visible Cross Tube
  • 350
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Kia Sorento's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13073 Curt Class 3 Trailer Hitch Receiver

Installation Details C13073 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
350 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Some models require trimming of fascia for the receiver tube. No drilling required for installation , Exhaust must be temporarily lowered for installation , Heat shield must be modified or trimmed for hitch installation , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately





Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13073

Average Customer Rating:  4.8 out of 5 stars   (308 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Very easy installation on my 2011 Santa Fe. The instructions were very clear and videos very helpful. I have used the hitch a number of times the past year to pull my utility trailer and heavy rental equipment, such as large chippers and trenchers. My Santa Fe came pre-wired for trailer lighting and the etrailer lighting package installed easily and has worked without problems on all the trailers I have pulled.




by:
2012 Hyundai Santa Fe

I installed this by myself. I would recommend having someone to help get it in over the muffler that was a challenge to do alone. Everything fit like it should once I got it over the muffler. The wiring harness fit perfectly. I am very pleased with the hitch and wiring.


Comments
I have used this constantly without a problem.
Craig S - 06/18/2021


by:

Installation was not so easy. Cutting the heat shield was no big deal. My main problem was that the hitch receiver hit the bumper. I had to cut a 3/8" notch out of the bumper so that the hitch could clear. Note from my picture that the notch is not centered - make sure you completely bolt up the hitch before cutting - I used a Dremel and file. Its not critical that its a clean cut - you really don't see it. Also, the spare hits the hitch if it were in its normal position. Probably no big deal, but the spare position is shifted with the hitch installed. Due to having to cut the bumper, I have to rate the install as difficult. If it weren't for that, it would have been a 40 minute job - it took me over 2 hours. The hitch does look good once installed though.


Comments
hard to put spare tire back after install 2012 kia sorento curt c13073
-- comment by: Steve H - 07/15/2013


by:

Very good product. It shipped quickly and arrived in good condition. I had my local mechanic install, although no modifications were needed and I could have done it myself.


Comments
Works great.
Reid - 06/08/2022


by:
2012 Hyundai Santa Fe

We have a ‘12 model Santa Fe. It fit and looked great, just as advertised. We had a similar issue as I saw some of you had though with the bolts not threading into the base of the frame. At first I thought we were sent the wrong size, even went to the hardware store to pick up a couple other sizes, but it turned out the treads were just dirty and rusted from 10 years on the road. Bought a couple 1/2” pipe cleaners, cut the handles off to put them in a drill, and with some wd40 it cleaned it out pretty good. Was able to get everything to fit. The mount will push up into the bumper a little though, I see why some of you cut it out. That wasn’t necessary for us, and we were able to get it mounted with no issues. An extra pair of hands goes a long way in helping with install. Trimming the heat guard was easy enough also. Left the tacking screw off right there bc it was in the way of the mount.




by:
2012 Hyundai Santa Fe

Received the hitch in less than week, incredibly fast. Super price.

The videos were easy to understand, it was an easy install (except for the problem I'll describe below that was not any fault of etrailer or Curt). Hitch is exactly as advertised, works great (how could it not?)!

The wiring kit for the lights was literally.... "a snap".

I installed this hitch on a 2 year old 2012 Hyundai Santa Fe. I live in the Northeast and we just had a lot of snow which means tons of salt on the road. To install this hitch, there are two bolts which transverse the frame rail, I had no problem with these. There are also 4 bolts that screw directly into threaded mounting points (two on each side). This is where I had the problem.

The prethreaded mounting holes in the frame had rusted over. As I spent too long trying to get the bolts to thread, I was cursing etrailer for sending the wrong hardware. Then it finally dawned on me it might be a rust problem. I took an "AR15 chamber brush" (gun cleaning wire brush, pictured), sprayed it with rust cutter, and chased the holes. After that, the bolts threaded (still a bit difficult) and I was able to finish the install.

My advice is to have this type of brush handy if your mounting points might be rusty, and test fit all the hardware without the hitch in place before you start. This is ESPECIALLY true if your vehicle is not brand new.

If you are considering installing a hitch on a new vehicle, but you put it off, it would be wise to install temporary bolts in the mounting points or art least grease them heavily.




by:
2012 Hyundai Santa Fe

2012 Santa Fe Limited, the Curt Trailer hitch C13073 is a perfect fit. Simply and very easy! 35 minute install. No cutting, no trimming. Simply follow the directions. Unlike the "Hidden Hitch" or Draw Tite the Curt hitch is very nicely tucked away giving it that professional clean look. Unlike the others it also has 6 attachment points (Bolts) that I felt made it much more secure. Very well thought out design, even if it "slightly" interferes with the space-saver spare. Simply nose the spare up over the hitch as you crank it up and it pops into place. As for the wiring it was very easy. Rather than pulling apart all the interior paneling as the video shows, I simply fished a coat hanger up through the grommet under the car up to the access panel and simply pulled it down and that was it....done! Either way, the etrailer website is the most informational website I've ever seen.




by:

I ordered this hitch on May 07, 14 at 12:48pm CDT this is when my confirmation came in a email. At 3:14pm I get a email from George that my order was pending should ship in 24 to 48 hours. At 11:42pm that night I get a email from Christopher that order was shipped!!!!! WOW all in one day. I told my wife that it should be here Monday the 12th. [since I was suppose to have already ordered it]. Friday about 2:30pm UPS backs in my driveway with the hitch on his truck.. I watched the video online of the installation and 1hour 15min later it was on the car by myself. The guy at the local U-Haul store wanted $329.95 to install this same hitch on my car. You Guys ROCK & made me look good to.
Thank You for the best customer service I've had in a long time. I though companies no longer knew how to give good customer service anymore.
Thank you
Walt R........




by:

Easy both up installation I bought a hitch from another company on [online retailer] and they sent the wrong one then wouldn’t allow me to return it. etrailer Was a great interaction and they stand behind their product




by:
2012 Hyundai Santa Fe

The product seems great - solid, not too difficult to install. My complaint is the time it took to ship. Not only did the order get lost in limbo a bit, but the people I talked to, once on the phone, another by E-mail, both promised me delivery times that did not occur. I finally received the product a month after my order, and again, it looks great.


Comments
Great! Everything works just as promised.
Mark - 05/21/2022


by:

Super easy install. Lined right up.




by:
2012 Hyundai Santa Fe

Looks great after installation!
Easy
install and perfect fit for my Santa Fe.
Thx to etrailer i received items very quickly installed even faster and im ready for my weekend trip!
Thx again! I will definitely use etrailer again.




by:

Product is as described; well made and not difficult to install. Would buy from etrailer again. Very pleased with my purchase.




by:

Photos in instructions are of very poor quality, time and difficulty estimates are extremely too optimistic, instructions should strongly suggest this is a two person job, parts were missing from the wiring connector assembly, the missing parts were replaced, however it took weeks to get them, as far as the actual products I am very pleased with the quality of the hitch and wiring connector.




by:

Just as advertised. The instructions were detailed enough to know what I was getting into and perfect for getting the job done on the first try. I was able to avoid having to cut the bumper too which was a nice bonus. Works well for our hitch mounted bike rack and hasn't come loose in over a year. so far.




by:

I'm a DIY kind of person and other than working around the muffler this was an easy installation. Thank you etrailer for this wonder money saving option.




by:

Sturdy product and installation was easy thanks to your helpful video!




by:
2012 Hyundai Santa Fe

Excellent service, the product arrived on time and well protected.
Installation instructions are super helpful.




by:
KiaSorento

It fit perfect on my kia sorento sx with no trimming of the bumper




by:

Great company to deal with. The hitch arrived today as expected. My husband has already installed it!




by:
Saturn Relay

Curt trailer hitch arrived as scheduled. Installation without raising the vehicle was a challenge. Definitely had to release the muffler. Did not have to trim the bumper plastic--there is sufficient flexibility of the plastic to allow placement of the trailer hitch and not overly distort the bumper contour. Did not possess die tap to clear out the vehicle threaded holes, but small metal brushes finally did the job. Make certain that all vehicle holes will accept their appropriate bolt or screw before placing the trailer hitch, otherwise it can be difficult to then access the vehicle threaded hole for cleaning. Alignment of the trailer hitch attachment holes was just a little off-center. As one reviewer suggested, place the bolts and screws to attach the trailer hitch to vehicle, but don't tighten to specification until all have been placed.

After 1 year, trailer hitch still looks great and functions well. Connecting the trailer electrical wiring did impact the turn signal switch relay with an audible clicking sound when operating the vehicle, but vehicle dealer corrected that by just unplugging and replugging the trailer wiring connectors.


Comments
Hitch is still working well. No issues with electrical wiring. I do keep the rubber cover over the electrical connector while not in use.
Virginia f - 11/26/2017


by:

was delivered when told and installed as expected, thank you


Comments
Still happy with my purchase, etrailer is a good company to deal with
Steven - 04/04/2022


by:
2013 KiaSorento

Installed on a 2013 Kia Sorento. After I dropped the spare tire out of the way everything was mush easier. Bolted on good, did not have to do any cutting of the plastic trim on the bumper. Pretty awkward doing it by yourself. Clean out the mounting holes!!! I did not even attempt to install before I cleaned out the holes and a lot of dirt came out.
Overall looks good and very happy with the hitch.


Comments
Great product!!!!
Joshua - 05/17/2020


by:
2012 KiaSorento

Excellent bolted right up no problem I didn't take no pictures I just wanted to get it on there and start pulling my trailer great hitch




by:
2013 KiaSorento

Order was received in five business days, very easy to install, took more time to drop muffler from rubber mounts, trimming heat shield was a snap, having the right tools is a big help and being a motorhead healps too.
Very satisfied with hitch product and the PRICE.

Thank You.......


Comments
The hitch fit perfectly and was quick and easy to install.
C - 03/15/2018

25
311
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Does Curt Trailer Hitch C13073 Require Use of Stabilizer Strap with Bike Rack
    At one point Curt required the use of stabilizer straps with their hitches like the # C13073 but they recently stopped requiring the straps so based on that this hitch would be the one you'd want. I attached an install video for this hitch on a similar vehicle for you to check out as well.
    view full answer...
  • Thread Pitch of Hitch Mounting Bolts on 2005 Hyundai Santa Fe
    You are correct. According to Draw-Tite, each frame member has 5 mounting holes with the corresponding mounting nuts welded up into the frame. The forward-most nuts are M12 x 1.25 and the remaining four are M10 x 1.25. I've provided a diagram showing the locations.
    view full answer...
    Image 1 for
  • How to Clean Nuts Welded into Frame of 2011 Kia Sorento to Install Trailer Hitch
    Absolutely. If the wire brush and WD-40 treatment didn't work, brake out the big guns and hit that frame mounted weld nut with a M10 x 1.25 thread tap. Be sure to spray a generous amount of WD-40 or other spray lubricant up into the weld nuts before using the thread tap.
    view full answer...
  • Trailer Running Lights Do Not Work for Trailer Towed by 2012 Kia Sorento
    If the 4-Way does not show power for the running lights then it could be the converter or it could be something with the vehicle. Consult the vehicle owners manual first to find the locations of the tow package wiring fuses or relays and check the ones related to the running lights. If blown, you should just have to replace with a new one and everything will work again. If everything is intact you will want to use your tester to test the wires going into the converter from the vehicle....
    view full answer...
  • Can the Curt Hitch # C13073 Handle 575 lbs of Tongue Weight
    All of the hitches available for your 2013 Kia Sorento will have a max tongue weight rating of 350 lbs like the Curt hitch part # C13073 that you referenced. Because of that I cannot safely recommend you put 575 lbs of tongue weight on the hitch. Looks like you'll have to either find a different vehicle or use lawn chairs.
    view full answer...
  • What is the Size of the Shipping Box for Curt Trailer Hitch # C13073
    I went out to the warehouse and spoke with one of our shippers. He looked up the box dimensions for Curt Trailer Hitch, # C13073, and it is 58 inches by 8 inches, by 26 inches. I have included a link to the installation details below for reference.
    view full answer...
  • Compatibility of Curt Class III Receiver Part # C13073 With 2011 Kia Sorento LX
    I have spoken with one of my contacts in Technical Support with Curt Manufacturing, who assures me that the Curt Class III Receiver, part # C13073 will fit your 2011 Kia Sorento LX. It is only the SX model, with dual exhaust exiting both sides of the vehicle, that presents a fit problem. For your convenience, I will provide a link to the installation instructions for you to examine.
    view full answer...
  • Trouble Installing Full-Size Spare With Hitch Mounted on 2010 Hyundai Santa Fe
    The tow bar, or hitch that you selected, Curt Trailer Hitch Receiver - Custom Fit - Class III, part # C13073, will fit your 2010 Hyundai Santa Fe. I contacted our representative at Curt and he informed me that the Santa Fe they installed part # C13073, on had a full size spare and had no issues. He informed me that to re-install the spare tire after lowering it, you would want to wedge or position the spare against the tubing of the hitch and underside of the vehicle and then lift the...
    view full answer...
    Image 1 for
  • Does installation of the Curt Hitch # C13073 Require Trimming of the Rear Fascia
    I spoke with my contact at Curt Mfg. and he said that trimming of the rear fascia should not be required for the 2010-2011 Santa Fe or 2011 Sorento vehicles. I have provided a link to installation instructions for you to review and a photo of the # C13073 hitch on a 2011 Sorento for you.
    view full answer...
    Image 1 for
  • Does Installation of Curt Class III Hitch # C13073 Affect Factory Warranty on a 2012 Kia Sorento LX
    There is actually a Federal Law called the Federal Magnusson-Moss Warranty Act. This Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the prob­lem in question. Because of this law I would not worry about adding an aftermarket trailer hitch or trimming the heat shield voiding your vehicles factory warranty, unless you overload the trailer...
    view full answer...
  • Do Bolts for Trailer Hitch Install have to be Torqued in Specific Order on 2011 Hyundai Santa Fe
    It does not matter which bolts you torque down first. Alternating sides will be beneficial because it should make tightening the other bolts easier (so none bind). All the torque specs can be found in the installation instructions which I have linked. I have also included a link to a video showing a typical installation for you.
    view full answer...
  • What Size are the Trailer Hitch Receiver Bolts and Weld Nuts on a 2012 Hyundai Santa Fe
    The weld nuts in your 2012 Hyundai Santa Fe will use Grade 5 bolts that are M10- 1.25 x 30. There is also another bolt, washer, and nut on each side required for the installation of the Curt # C13073. The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75684 will only use those four bolts and washers.
    view full answer...
  • Does Curt and Draw Tite Hitch for 2012 Kia Sorento EX Allow for Full Size Spare
    Yes both the Curt Hitch part # C13073 and the Draw Tite part # 75684 which fit your 2012 Kia Sorento fit with a full size spare. I'd say the Curt gives easier access to it so it would be what I'd go with.
    view full answer...
    Image 1 for Image 2 for
  • Best Hitch Stabilizer for 2" Hitch on 2011 Kia Sorento
    The best hitch stabilizer for the Curt # C13073 hitch on your 2011 Kia Sorento is the Anti-Rattle Trailer Hitch Receiver Lock # 63232 which will both secure and stabilize your towing setup. The only thing to note is that to use the Anti-Rattle Lock you are going to have to have a hollow shank on your ball mount or accessory. I've added a link to a video review of this lock for you to check out.
    view full answer...
  • Will Curt Trailer Hitch # C13073 Fit a 2010 Hyundai Santa Fe With Under Mounted Spare Tire Carrier
    Is the spare tire carrier you are referring to a factory option, or is it something you installed aftermarket? The Curt hitch # C13073 may work, as a space saver tire carrier is visible in the installation pictures, but it does have a closer fit than the Draw-Tite, as it runs above the exhaust. We do not have any confirmation on whether any of the hitches available for the 2010 Hyundai Santa Fe would or would not work with an aftermarket under mounted spare tire carrier. I would recommend...
    view full answer...
  • What Trailer Hitches Fit a 2011 Kia Sorento with Dual Exhaust
    By dual exhaust, it means exhaust pipes on both the driver and passenger side of the vehicle. The type with two small pipes on the same side would still be considered single exhaust. All three available trailer hitches for the 2011 Kia Sorento will fit models with the single exhaust. The Curt trailer hitch, # C13004, will fit a dual exhaust model as it is shaped to fit around this type of exhaust on both sides. The Draw-Tite # 75684 is designed to fit only the single exhaust models (the...
    view full answer...
  • Is Draw-Tite Trailer Hitch # 75684 Visible Once Installed on a 2011 Kia Sorento
    Since the 2 inch hitch opening on Draw-Tite # 75684 is in line with the cross tube, you will be able to see the cross tube running below your bumper. This would be true for any of the hitches available for your 2011 Kia Sorento, but the Curt model # C13073 would be the best looking option, as it features a round cross tube, and the sides of the tube are recessed toward the front of the vehicle. You would still be able to see the center portion of the cross tube on either side of the...
    view full answer...
  • Visiblilty of Hidden Hitch Class III Receiver Part # 75684 on a 2010 Hyundai Santa Fe
    Hidden Hitch is a brand name, it is not necessarily a description of how or where the hitch would install on the vehicle. Once the Hidden Hitch Class III Receiver is installed on a 2010 Hyundai Santa Fe, the entire length of the crossbar will be visible under the rear fascia. If you were interested in something that is not quite so visible, I would recommend the Curt Class III Receiver Hitch, part # C13073. This hitch is constructed of round tube, rather than the square tube. Many find...
    view full answer...
  • Will a CURT Trailer Hitch Fit a 2012 Kia Sorento SX with Single Exhaust
    The CURT Trailer Hitch # C13073, is designed to fit on your 2012 Kia Sorento SX since it has single exhaust, with only minor heat shield modification required under the vehicle. For the hitch to install properly, the heat shield will need to be cut and reinstalled. You will remove about 8 inches from the heat shield and you can use aviator shears to trim it. I have included a link to the installation details and a link to a video showing a typical installation for you. If you plan on doing...
    view full answer...
  • Installation Details for a CURT Trailer Hitch on a 2011 Kia Sorento LX
    Trimming the heat shield will not damage the frame of your 2011 Kia Sorento when installing CURT Trailer Hitch, # C13073. The heat shield is a separate piece of thin metal that you can bend by hand. It is used to dissipate heat from the exhaust. The area that will be trimmed will leave a gap taken up by the trailer hitch bracket. The heat shield will still function without that removed section and the hitch will be perfectly fine. It will not cause a fire under the vehicle or damage the...
    view full answer...
  • Hitch Classes Available for a 2013 Kia Sorento 4 Cylinder
    For hitches the Classification is in numbers and not letters. For example for your 2013 Kia Sorento with a 4 cylinder engine we have the Class III hitch part # C13073 which has a 2 inch opening and we have a Class II hitch # 36511 which has a 1-1/4 inch opening. I like to recommend 2 inch hitches more than 1-1/4 inch as they have more options available for them for accessories. I attached a help article on hitch Classifications for you to check out as well.
    view full answer...
  • Will the Bumper Need to be Modified to Install the Draw-Tite # 75684 on a 2013 Kia Sorento
    There are no models of the 2013 Kia Sorento that will require you to notch out any portion of the bumper to install this Draw-Tite # 75684. The installation of this 75684 is very straightforward and basically just involves raising the hitch into position and then bolting it in place. There is a Curt hitch that will require some trimming of the heat shield and trimming of the lower fascia on some models though. This hitch is Curt hitch # C13073. I have attached installation instructions...
    view full answer...
  • Why Does Curt Trailer Hitch Receiver # C13073 For 2013 Kia Sorento Require Support Straps
    Although the trailer hitch itself will support non-trailer loads like bike racks and cargo carriers, this type of weight does put added strain on the hitch. In order to alleviate the leveraging affect that a non-trailer load places on the hitch, Curt likes to error on the side of caution and require the use of stabilizing/support strap, like part # 18050, to maintain their warranty. With this being said, I can not say that the Curt Trailer Hitch Receiver, # C13073, is of a lesser quality...
    view full answer...
  • Trailer Hitch Receiver Compatibility For a 2012 Hyundai Santa Fe With Dual Exhaust
    For your 2012 Hyundai Santa Fe with dual exhaust I recommend the Curt Trailer Hitch Receiver # C13073. This receiver is confirmed to fit with your dual exhaust. This receiver also looks better as you do not have as much crossbar that hangs below the bumper fascia that you get with the Draw-Tite # 75684. The Draw-Tite Max-Frame Trailer Hitch Receiver # 75684 will not fit your Santa Fe with the dual exhaust.
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Mike H
Video Edited:
Mike H
Employee Dustin K
Video Edited:
Dustin K
Employee Chad S
Video Edited:
Chad S
Employee Sue W
Video by:
Sue W
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830