To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This completely hidden hitch keeps your vehicle looking like it just came off the assembly line. Remove the receiver for a fully concealed look when you're not carrying your bikes to the trail. Only for use with hitch-mounted racks and carriers.
Features:
Specs:
Note: This rack receiver is for hitch-mounted accessories only. The receiver tube included with this hitch cannot be used for towing.
If you would like to upgrade this rack receiver for towing, you will need to purchase the Stealth Hitches towing kit (391CONVB7 - sold separately). The ball mount included in this kit inserts into the center block of the hitch in place of the receiver attachment. A 2" hitch ball is included with the ball mount, making it ready to tow with out of the box.
If you want to take your bikes to the trail with your family this summer, you have plenty of options. You can carry your bikes on top of your car with a roof rack, but that bulky rack can increase drag on your ride. You can use a trunk rack, but that's a pain to mount and it can scratch your car's paint. Or you can install a hitch on your ride and use a hitch-mounted bike rack to carry your bikes.
This rack receiver is designed to act as a mounting point for your hitch bike rack or cargo carrier. Just slide the shank of your carrier into the receiver for use, and when you're done you can not only remove the carrier, but the receiver as well, leaving your vehicle looking clean and unmodified.
Nothing can ruin the clean, stylish look of your vehicle like a giant piece of metal bolted beneath its bumper. Luckily, with the Stealth Hitches rack receiver, you never have to worry about messing up your vehicle's lines.
This hitch installs behind your bumper, keeping the cross tube concealed and leaving only the hitch receiver visible. Even better, the receiver can be easily removed from the cross tube when it's not in use so that you won't see any trace of the hitch. This means that you can retain that clean, from-the-factory look for your ride, while still being able to carry your bikes and gear on the next family road trip.
The receiver can be attached or detached in seconds with no tools required. To insert the receiver, simply pop the base up into the stainless steel block at the center of the hitch until it automatically latches in place.
Be sure to then press the lock on the side of the block to fully secure the receiver. When you're finished carrying your bikes or cargo, use the included key to unlock the latch. Then turn the handle on the block clockwise and remove the receiver. You can stow the receiver in a safe place, like your vehicle's rear cargo area, or you can use a convenient carrying case (391CASER - sold separately).
And when you're not using the receiver attachment, the included hitch plug covers the center block's opening to protect the hitch's body from dirt and debris.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (98 Customer Reviews)
This completely hidden hitch keeps your vehicle looking like it just came off the assembly line. Remove the receiver for a fully concealed look when you're not carrying your bikes to the trail. Only for use with hitch-mounted racks and carriers.The video and instructions are spot on. Recommend watching the video once fully before doing anything and keeping it handy at each step. Note you will want to curse taking apart the electrical connections. They were the toughest part of the whole job. The job took 2.5 hours with a buddy.
Fits perfectly with model 3 2022. The only thing I noticed is the right side of my crush bar had only 2 holes instead of 3 as in the installation manual. Other than that installation went smooth. Thanks etrailer for prompt delivery.
I installed this hitch in about 3 hours, took my time to make sure everything was right. There’s nothing worse than completing a job then realizing you forgot a screw. The etrailer instructional video was perfect and made the job so much easier. Shipping was super fast !!! Ordered and received within 3 days !!! Best prices for most anything you order from them and customer support is on point. I’ve ordered several items from etrailer in the past and always get the absolute best price … oh yeah, they price match too !!!! Luv etrailer !!!
Well made kit with usable instructions for the Tesla Model 3. Tesla changes their assembly techniques frequently so the instructions may not be completely accurate, however, it is easy to see where you need to modify. Highly recommend using jack stands or ramps for easier access to the under tray. Also, use painters tape to protect the body panels due to removal and more importantly reinstalling the bumper. It took two of us just over 3 hours to complete.
The hitch seems well designed and doesn't affect the profile of the car when the receiver isn't installed. You can replace the hitch panel on newer model 3s and nobody would ever know it is there. Once the hitch receiver is installed it does stick out prominently from the body. Depending on your rack, this may be a great thing, or a slightly bad thing. My Yakima Dr. Tray sticks out quite a bit maybe impeding approach angles. I haven't had any issues yet, but does cross my mind while driving.
If you're carrying bikes on the Model 3, this seems like the best choice. I wanted to use suction cups on the glass, but both reviews and manufacturer recommends against it due to Tesla's glass crack issues. No guarantees it won't crack even when following updated suction cup locations. The Tesla roof rack is too cumbersome to mount and unmount and also has glass cracking issues. So, that leaves hitch racks and this seems to be the best solution.
High quality product that works really well on 2019 M3. Very solid attachment. A lot of work to take the whole back end off, but doable if you are motivated and careful with all the snap features. Nice to avoid needing to cut the bottom panel of the car (on older cars) for the hitch to remain stealth, although so far the hitch has been exposed the whole time (but planning on hibernating it for the winter...).
This was my 1st time installing and it took a few hours. The passenger side 25mm torx screw was hard to get off and on from the Tesla. The kit is perfect and fits my 2021 Tesla Model 3 with no cutting. I did buy the separate black and orange plastic tool set, it made the job easier. I did use painters blue tape to prevent scratches. I did trim the small Rubber cap so I could out the removable black cover back on underneath when I am not usine the hidden hitch. Note older Teslas do not have the removable cover, so minor trimming of that cover will be required.
The only downside I saw using this hitch was that the ground clearance is too low. I attached a Yakima bike rack and it scrapes my driveway, which has a little slope (maybe 10 degrees).
Excellent product. Installed in a 2022 LRM3. My wife and I installed in about three hours. We found a loose wire that was causing a bulge in the bumper, the car looks better than before!
The installation instructions were not very clear. The reinstallation of the bumper trim was very hard and to have another person help. That should be included on the instructions to understand the process and have another person available. Bumper trim was very hard to place back on correctly and I still have an edge that is not flush.
Great quality and packing. Instructions were great but anyway huh do it, install was long but easy as I dud it myself. Great product for the Model 3. Have not put a rack yet but looking forward to it. Thanks Etrailer!!!
So far so good. Have had hitch for a year and it’s a game changer. Can reveal it quickly and throw on a bike rack to carry 4 bikes including an ebike. Amazes me that it’s so solid. But it is. And invisible when not in use
I bought a new bottom plastic panel for my Tesla model 3 from Tesla.
Relatively easy installation with the detailed instructions that we’re provided. The YouTube videos were a must.
I have not had any issues with this hitch. I use both a bike rack and now I have the tow package. All has worked great. It is very convenient to be able to take the receiver on and off to hide it.
Nobody knows I have a trailer hitch until I mount the receiver tube.
Very happy with my hitch. It was a bit of work to install.
I used posterboard to seal around it, and I never remove it.
Very happy with the hitch! Installed myself in about 2.5 hours. Video and documentation is easy to follow.
Instructions on how to actually use/lock the receiver could use more info.
The hitch works well and is very well hidden. Only complaint is that is is very low to the ground and can cause my bike rack to drag on dips in parking lot entrances. If I am careful, then it usually isnt an issue
This Stealth hitch receiver was easier to install on my Tesla than I had feared, and the product feels like quality. There were no missing parts, and with the help of [online] videos (including one from trailer) it was easy to install-took me 3 hours vs. the 2.5 suggested but I spent some time looking for tools as I often do.
Easy install using the errailer video. Works flawlessly
Really enjoyed etrailer.com. Their website had everything displayed so we could see it, read about it, understand it, and compare it with others (including good videos). When it came time to buy this hitch, we simply went back to etrailer.com and bought from them to say thank you for the good product presentations. Several online staff people helped us with questions, too. Meanwhile, the hitch is standing in our front hall. It's so monumentally heavy that I haven't opened it yet, because our install date is still weeks off. But I certainly expect we'll be very pleased with it. Thank you, etrailer.com!
Great product. Complicated install for a diy but very solid hitch. Works as advertised and completely hidden when disenguaged. Hangs a little low but I've never noticed it scrape. 4 stars because of the high price and pricy install cost.
The stealth hitch is worth the money spent. Easily detaches when not in use and does not affect the profile of the car. The process of setting up the free install with etrailer makes it even better.
Very pleased. Easy to use and the installers had no problems. The bike rack fits perfectly, with no wobble.
Installation was pretty easy. I have had it about a year now. It is simple to use and reliable. When I travel long distances I remove the receiver and there is no evidence of having a hitch. If you are going to put a hitch on a Tesla, this is the one.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.