etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98847
Retail:$279.68
Our Price: $206.50
You Save: $73.18
Confirmed to Fit
2018 Subaru Outback Wagon
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (673)
- Q & A (0)
- Photos
2018 Subaru Outback Wagon - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Class III
- 2 Inch Hitch
- 4000
- Visible Cross Tube
- etrailer
- 600
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Subaru Outback Wagon's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum tongue weight: 600 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98847 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
Drilling required for installation , Access holes may need to be enlarged by drilling, filing, or rotary tool , Exhaust must be temporarily lowered for installation , Heat shield must be modified or trimmed for hitch installation
Complete Towing Package for 2018 Subaru Outback Wagon
Retail:$447.50
Package Price:$335.51
2018 Subaru Outback Wagon Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Outback Wagon Trailer Hitch Accessories
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- Product did not meet expectations
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98847
Average Customer Rating: 4.8 out of 5 stars (673 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Dan D07/08/2023
2017 SubaruOutback Wagon
I really nice custom fit for my Outback. The hitch seems like it's high quality and looks good on the car. Be aware however that you have to drill/make and absolutely enormous access holes in your frame rail to install this hitch. I would suggest that etrailer modify the instructions to require the use of the appropriate size step drill bit to make the hole. They should also include rubber grommets and perhaps touch up paint to seal up the hole you made. Otherwise things are pretty straight forward.
by: Grady03/06/2024
The trailer hitch receiver has worked as designed. I am very pleased with the product and the service of etrailer.
by: Steve12/23/2023
SubaruOutback Wagon
Installed yesterday. Went pretty smooth. Have an Outback and didn’t need to lift the vehicle to install it. Used my car stands to position the hitch and then rotated it up into position. Was able to install with one person
by: Bill08/25/2023
2019 SubaruOutback Wagon
Installation was exactly as the video showed. Easy Peezy. Hardware kit even includes two fish wires that are needed to install the hardware. Make sure you have a nice new drill bit because the Subaru frame is super hard. Stoked. Thanks E-trailer !!
by: Tim07/08/2023
2018SubaruOutback Wagon
Item e98847 etrailer Trailer Hitch Receiver is NOT a confirmed fit for a 2018 Subaru Outback 3.6L touring vehicle. The spacing between the vertical supports does not clear the spare tire wheel well. The vertical supports also press against the rubber muffler hangers on both exhausts. Etrailer agreed that the hitch from their manufacturer was out of tolerance but could not provide me with sufficient details on whether or not a replacement hitch would fit any better. I would not recommend this hitch - try your luck with another brand.
by: Mark 01/14/2023
The products were exactly as advertised, and the delivery was perfect. One year later it is still going strong! I would use etrailer again.
Mark
1/15/2024
Good. It is very strong but needs to be checked along the way to be sure it stays tight or else it will be loose and shake.
Mike L.
1/16/2024
@Mark If the bolts are properly torqued according to the ratings listed in the linked install instructions, the hardware should not be coming loose.
Helpful Links
by: Phil05/14/2019
2019 SubaruOutback Wagon
I decided to go with the etrailer branded class 3 hitch for my wife's 2019 Outback after getting etrailer's recommendation on which one would be best paired with my Thule T2 Pro XTB bike rack, which is a great rack, btw. Main reasoning was that the hitch sits back on the vehicle a little more and gives better clearance for the rack when folded up. This would apply to other kinds of hitch mounted accessories too. The hitch is not quite as hidden under the vehicle as some of the others but I was more concerned about using the bike rack as intended.
Installation was not too bad, with the biggest challenge for me being the tight spaces around the muffler to drill the necessary holes even with the exhaust lowered as described in the video. I even considered removing the muffler for better access but was able to get it done without that. Main concern was damaging the exhaust system in the front if it was lowered too much. Using lubricant on the rubber exhaust hangers worked great for removing and putting them back on at the end. The tip for using a step drill bit worked great to enlarge the access holes the appropriate amount, as well. I was able to do the installation by myself with the help of a small rolling dolly on which to sit the hitch on while I bolted up the first set of bolts. It held the hitch up enough to work on one side at a time without having to support the entire weight of the hitch by myself. Having a helper would be better for sure. The 6 out of 10 installation difficulty scale seems about right to me.
The hitch itself seems to be good quality, nice welds, matte finish looks great on the vehicle too. It also fits like a glove around spare tire well. No adjusting really necessary, just install the first set of bolts in the existing frame holes and you are lined up. You do have to drill the 2 more forward set of holes but using the hitch frame as the template (it's already mounted on the vehicle at this point) of where the holes go, it was a snap from there.
I'll attach a couple of pics with the bike rack installed to show how much clearance there is. I also tested with a bike on the rack and was able to open the rear hatch all the way with the bike rack in the lowered position (a feature of the Thule T2). Hopefully, this will help others that want to use accessories that require clearance for bumper and hatch. Great communication and follow up from the etrailer team too!
Phil
5/15/2020
A year later and the etrailer class3 hitch still looks and works great. Very satisfied with eTrailer again!
by: Dennis06/23/2020
So I recently purchased mountain bikes and knew I needed a bike rack and hitch. When making more expensive purchases, I research the product, competitors, pricing, customer services and reviews. I finally decided on the etrailer Trailer Hitch Receiver. I had it professionally installed and it looks great! I appreciate the help and assistance Teresa J. provided in helping me make my decision. Thank you eTrailer!
Dennis
6/24/2021
After one year, my hitch still looks and functions great! I love it so much, I ordered another etrailer Hitch for my other vehicle, a 2012 GMC Terrain and it works great on this and by 2015 Subaru Outback!
by: Sean 04/08/2024
2015 SubaruOutback Wagon
heavy duty hitch
very fast shipping
by: David 09/13/2023
Works good But I believe if the hitch was about 1/4" or 1/2" inch wider it would help in the mounting process. The bracket with was very tight on the sides of the spare tire between the frame due to the spray insulation.
by: Caleb10/02/2022
2022 SubaruOutback Wagon
Fun to install for the DIY person. Powder coating is nice and the thing is sturdy. I’ve just used it for a bike rack so far but everything is good. It’ll be ready if/when I need to use a trailer for something.
by: Dave S09/21/2023
2017 SubaruOutback Wagon
This is a PERFECT fit for my 2017 Subaru Outback. It was easy to install after viewing the installation video. Thanks for providing that, rather than just paper instructions. And the fishing wire for the bolt and washer inside the frame is inspired and worked great. Same specs as the other "name brand" at a lower price. Thanks!
by: Kaarel09/02/2022
Great hitch receiver. Needed a bike rack with enough capacity for 2 ebikes. Combo is perfect
by: David 04/19/2024
I had my hitch professionally installed and have not given it a thought since. It fit perfectly and does what it’s supposed to do.
by: Greg05/10/2022
2004 SubaruOutback Wagon
I installed this myself. Excellent packaging on hitch as it arrived undamaged. All hardware and bolt fish wires were firmly attached to the hitch. Instructions and video were very helpful in making this an easy project. I used car ramps and backed m wife’s Outback on them to provide a comfortable work area. Only thing different that I did from the video instructions was to mount the hitch with the 1st two bolts, mark the location, and drop the hitch to drill the forward bolts with a step drill. All newly drilled surfaces were painted for protection. Also found a couple of elongated frame hole plugs from our ’67 Mustang project to seal the hardware installation hole.
by: Josh H.08/03/2019
2019 SubaruOutback Wagon
This was a super easy install. I don't have access to a lift, so I just used ramps I picked up from Home Depot for oil changes. I am a pretty good sized guy but this gave me plenty of room to work. No issues at all on the install. Instructional video was great and easy to follow. The only comments I have would be that if you are using ramps, be sure to have a long sleeve shirt on and safety glasses. The metal chips from drilling are hot and sharp. The pull wires worked excellent, I only used one of them. You do need to put a couple bends in the wire which they don't mention in the video. All in all I am really happy and would highly recommend this as a DIY install.
Josh H.
8/4/2020
A year later and no complaints at all. I have been happy to recommend this product and company to friends.
by: Austin04/30/2023
2017 SubaruOutback Wagon
Product arrived quickly, instructions were clear and product works great
by: Michael12/14/2018
2017 SubaruOutback Wagon
Custmer service is great. They keep you well informed from the time you place the order to the time its delivered.
The quality of the etrailer brand hitch is very apparent to the point that I would rate it above the others and making for a trouble free installation
The hitch will be used for a platform bike rack.
by: Susan 11/08/2023
Good price and reasonable installation cost by my auto shop. Excellent product with a durable finish. No rust caused by salt road spray over its first winter.
by: sdnomad08/15/2019
2019 SubaruOutback Wagon
When reinstalling the muffler heat shield, there is one hitch bolt that interferes with remounting the heat shield. All you need to do is mark and drill out the location of the one hitch bolt that's under the heat shield. Once hitch is installed and muffler is still hanging down, place the heat shield in its original location with the 2 small bolts under the muffler. Then in order to mark the hitch bolt location under the heat shield, take a hammer and tap on the heat shield to indent the hitch bolt location. Take the heat shield off and drill the hitch bolt location on the heat shield. Take the nut off that hitch bolt, reinstall the heat shield with the two small bolts behind the muffler and the nut on the hitch.
I cut out the location of the bolt on the heat shield but I should have drilled it.
Hitch was an easy install. I recommend having a step drill that's at least 1". Impressed with the hitch but was slightly disappointed that hitch was scratched up when opening the box.
by: Michael06/16/2020
2016 SubaruOutback Wagon
The hitch is built like a tank and fit perfectly. I watched the instructions online before beginning and the process was very simple. I was grateful they provided the wire fishes for the bolts. I managed to do the whole thing myself by simply laying the hitch on my belly as I was under the car, and set the first two bolts. I regret not following advice I saw in another review about making a hole for the heat shield, and capturing it under one of the hitch bolts, since with only 3 screws remaining, the heat shield might end up rattling in time. If I were to do it over again, I would do it that way. Do make sure to drill out the first holes big enough for not only the washer, but also the bolt head, which is a touch wider.
The whole job took me about 3 hours, working slowly with gimpy knees. I was happy to spend a sunny morning doing that, rather than paying hundreds of dollars for such a simple task.
by: JR08/08/2018
Subaru
Just put on etrailers hitch. This is my third one that I have installed from etrailer on my past Subaru. I went with the etrailer hitch because I liked the matte black finish over the gloss black Curt. This one is easier than the Draw- Tite because it weighs less and I was able to handle it myself. I would suggest using a good step drill bit when enlarging the holes and make sure they are big enough. It took me 2 hours to complete mainly because of cutting the new holes and enlarging the other holes. Hitch was delivery very timely from etrailer just like the previous ones that I installed.
by: Pete S07/22/2023
IT WORKS GREAT FOR MY PURPOSE, WHICH IS TO CARRY A COUPLE 80LB E-BIKES. I PUT A HARBOR FREIGHT ELECTRIC WINCH IN THE ceiling of the garage and lower to the correct level and back my car in to hook it up.
by: Noah 10/18/2023
Perfect hitch and the installation video was very helpful!
by: HappyCustomer03/31/2023
I love this hitch! I am using it exclusively for bicycle transportation.
Installation: it was relatively easy to install, but I did have to purchase some additional tools that added to the overall cost. Instructions were very helpful.
Sturdiness: No complaints at all! It has been holding up very well and I am glad I opted for the 600lbs tongue weight since I have since upgraded my bike rack to a much heavier one and my setup is now e-bike ready (much heavier than regular bikes).
Compliments: I was somewhat surprised to even have by passers ask about my trailer hitch. The little logo sticker came in handy, they could just take a picture of that after I recommended the product to them. :)
25
676
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Will the etrailer Receiver Hitch Fit my 2018 Subaru Outback Wagon with Dual Exhaust?The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" item # e98847 is a confirmed fit for all models of the 2018 Subaru Outback Wagon. It's not stated in the instructions but if you look at the diagram it has both exhaust hangers identified for the dual exhaust models. You will just have to repeat that step which will add installation time to the estimate on the instructions.
view full answer... - Does the etrailer Hitch for a 2014 Subaru Outback Wagon Fit Models with Dual ExhaustYes, the etrailer Trailer Hitch Receiver part # e98847 which is a fit for a 2014 Subaru Outback Wagon does indeed fit models with dual exhaust.
view full answer... - Install Video of etrailer Hitch for 2019 Subaru Outback WagonI have attached an install video for you below of the etrailer Trailer Hitch Receiver part # e98847 on a 2019 Subaru Outback Wagon. It can be streamed and viewed online but not downloaded. The install is pretty easy, just common hand tools required and you don't need a lift.
view full answer... - Is There a Real Benefit of a Class III Hitch Over a Class II Hitch for a 2015 Subaru OutbackYes, a class III hitch comes with a 2" receiver and a class II hitch comes with a 1-1/4" receiver. The larger 2" receiver allows for a much greater variety of hitch mounted accessories to choose from. Therefore, although you can't carry or pull more weight with the class III because the vehicle is rated lower, it's still beneficial because it allows for greater compatibility. Honestly, I really can't think of too many good reasons to install a class II over a class III when one is available....
view full answer... - Trailer Hitch Receiver With Most Clearance For 2016 Subaru OutbackWe do have a hitch with clearance less than 3.9 inches from the hitch pin hole to the edge of the bumper for your 2016 Subaru Outback wagon. The hitch with the best clearance - 2-1/2 inches from the hitch pin hole to the edge of the bumper - is the following: - etrailer Trailer Hitch Receiver # e98847 The # e98847 does not have the exact same hole pattern as your Draw-Tite though, as they are closer together.
view full answer... - What Does Enlarging Frame Holes in etrailer.com Hitch Installation on 2015 Subaru Outback Mean?The etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # E98847 requires using a 17/32 inch drill bit to install and then we recommend using a rotary tool with a carbide bit to enlarge the hole for the spacers to 1.125 inches. I've attached a photo as well as the complete instructions to assist. The spacer is 1/4 inch by 1 inch by 3 inches. I've attached a video of this installation to assist.
view full answer...
- What Size Drill Bit is Used to Enlarge Hole to Install Hitch on 2017 Subaru Outback WagonThe tool list for the etrailer hitch part # e98847 includes a 17/32 inch drill bit, a rotary tool/carbide bit, and tin snips related to the hole enlargement and fascia trimming required.
view full answer... - Does etrailer.com Hitch # e98847 Fit 2014 Subaru Outback WagonWe have confirmed that the etrailer.com Trailer Hitch Receiver # E98847 that you referenced does fit your 2014 Subaru Outback wagon. I attached an install video for this on a similar 2015 Outback which is the oldest vehicle model we have a video for this hitch on.
view full answer... - Do you Recommend the etrailer # e98847 or the Draw-Tite # 75673 for My 2018 Subaru Outback?As far as the Draw-Tite - 2" # 75673 and the etrailer Hitch - 2" # e98847, these two hitches are almost identical in every way when installed on your 2018 Subaru Outback. They both provide you with 600 pounds of maximum tongue weight capacity and 4,000 pounds of maximum gross towing weight capacity. Also, the installation difficulty and process is virtually the same. Two things, however, stand out as an advantages for the etrailer hitch. First off, it is made in the U.S.A. while the Draw-Tite...
view full answer... - Best Trailer Hitch For 2019 Subaru Outback Wagon To Carry BikesThe best trailer hitch option for the 2019 Subaru Outback Wagon to a bike rack with a 2" shank is etrailer.com Trailer Hitch Receiver part # e98847 which provides better ground clearance than the other hitch options available. The extra ground clearance will come in handy during low ground clearance situations like turning into a steep driveway the bike rack won't drag the ground. It's also a very easy installation that does not require drilling I have attached an installation video for...
view full answer...
- Replacement Hardware for etrailer Trailer Hitch Receiver e98847 for 2015 Subaru OutbackFor replacement hardware for your # e98847 you need the Replacement Hardware Kit # RHK. You will need to enter e98847 in the "Hitch Item Number" field and then choose etrailer in the drop down menu under "Manufacturer." I went ahead and included an installation video on a 2015 Outback for your reference.
view full answer... - Comparing etrailer.com and Draw-Tite Class III for Using Bike Rack on 2016 Subaru Outback WagonBoth the ettrailer.com # e98847 and Draw-Tite # 75673 Class III Trailer Hitches that you mentioned are great options for your 2016 Subaru Outback Wagon, however I do recommend the etrailer.com model for a couple of reasons. These are both custom hitches that will mount to the same area on the Outback's frame rails but the etrailer.com # e98847 is going to stick out just a tad further towards the rear of the bumper than the Draw-Tite. This ends up providing a perfect combination of allowing...
view full answer... - Replacement Install Hardware for etrailer e98847 Class III Hitch for 2014 Subaru OutbackWe can certainly provide that for you! You'll need to order our # RHK replacement hardware kit. Use the provided link to take you to the # RHK product page. In the provided field, type in the hitch part number. Then, use the drop down menu to select the hitch manufacturer.
view full answer... - Trailer Hitch Recommendation for 2016 Subaru Outback for Bike RackThe etrailer hitch part # e98847 that you referenced is a confirmed fit for your 2016 Subaru Outback Wagon and would work well if the Kuat Transfer bike rack you have now. The other option you might consider is the Draw Tite # 76227 which has a concealed cross tube which allows it to be a little less visible and also better ground clearance. We don't have installers we specifically recommend for hitch installs but if you go with a local mechanic to you that has a good reputation they...
view full answer...
- Recommended Trailer Hitch for 2018 Subaru ForesterIn my opinion a Class III hitch is a better option whenever possible. They have a higher weight capacity and there are far more accessories to fit the 2 inch receiver than the smaller 1-1/4 inch of the Class II. I definitely recommend a Class III hitch for your 2018 Subaru Forester. Now, the best Class III hitch depends on what you're going to be using it for. Personally, I like the looks of the Draw-Tite # 76227 above the rest. The crosstube is hidden behind the rear bumper so all...
view full answer... - etrailer Trailer Hitch that Fits 2019 Subaru Outback WagonWe do have an etrailer hitch that fits your 2019 Subaru Outback Wagon with the part # e98847 but the part number you mentioned does not fit.
view full answer... - Gross Towing Weight Capacity and Recommended Hitch for a 2017 Subaru Outback Thanks so much for purchasing your hitch from us! I understand the confusion associated with towing weight capacity. There are many factors that contribute to the gross towing weight capacity of a vehicle. In many cases, it is not necessarily the size of a vehicle alone that determines the rating. This can be misleading. Manufacturers produce vehicles with varying structural integrities, and these factors have a large influence on a vehicle's towing capacity. With that being said, through...
view full answer... - Recommended Trailer Hitch for 2019 Subaru Outback with Bike RackThere are really two main types of trailer hitches for a 2019 Subaru Outback, visible like the etrailer Trailer Hitch Receiver part # e98847 and hidden like the etrailer Trailer Hitch Receiver part # e42TR. The visible hitch means you can see the cross tube under the bumper and the hidden means you can't. That said, there is a benefit to the visible as you don't have to pull the bumper off so it's much easier to install. If you're handy, the hidden option is what I recommend since you have...
view full answer...
- Comparing Curt and etrailer Hitches for a 2019 Subaru Outback WagonThe Curt Trailer Hitch Receiver part # C13206 and etrailer Trailer Hitch Receiver part # e98847 are both excellent options for a 2019 Subaru Outback Wagon. These two options install in the exact same way. The difference between them is in regards to the finish. The Curt hitch has a glossy finish and the etrailer hitch has a matte finish. The matte finish will blend in with the vehicle more and work better to hide scratches so this is what I recommend.
view full answer... - Thule EasyFoldXT Bike Rack Compatibility With An etrailer Trailer Hitch Receiver The etrailer Trailer Hitch Receiver # e98847 is a confirmed fit for your 2017 Subaru Outback Wagon so you'll have no issues using it to haul the Thule EasyFold XT Bike Rack for 2 Electric Bikes # TH903202. This hitch has a 4000lbs GTW and 600lbs TW. This bike rack has a per bike weight capacity of 65lbs and uses padded clamps with hand knobs to hold your bikes firmly on the rack.
view full answer... - Tongue Weight Capacity of 2016 Subaru Outback 3.6R with etrailer.com Trailer Hitch ReceiverThe etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # E98847 will not increase the towing or tongue weight capacities of your vehicle but it can limit it. Trailer hitches are not rated for weight capacities on each vehicle but rather on the hitch itself as many hitches will fit different models and different years. For your 2016 Subaru Outback 3.6R the manufacturer lists your towing capacity at 3,000 lbs with a tongue weight capacity of 200 lbs....
view full answer... - Recommended Trailer Hitch Receiver To Fit A 2019 Subaru Outback WagonThe recommended hitch really depends on which model T2 you have. For the TH9044 Thule T2 for 2" hitches you will need a 2" hitch receiver. In that case I recommend the etrailer.com Trailer Hitch Receiver # e98847. I like this hitch because the low profile design and matte black finish blends in the receiver tube so that it looks like it was always a part of the Subuaru Outback from the rear of the vehicle. Included is an installed example for reference. If you have the Thule T2 Classic...
view full answer... - Curt 24" X 60" Cargo Carrier Capacity Calculation On a 2016 Subaru OutbackThe video you saw on Curt's website about the dividing tongue weight with distance in feet of the carrier is referring to the weight of your receiver. So if you had the etrailer Receiver # e98847 on your 2016 Subaru Outback with a tongue weight rating of 600lbs, then Curt would recommend not exceeding 300lbs of weight including the 64lbs of the 24x60 Curt Cargo Carrier # C18152. Or a total gear capacity of 236lbs.
view full answer... - Best Trailer Hitch and Bike Rack For 2019 Subaru Outback Wagon To Carry Heavy BikesI recommend the etrailer.com hitch part # e98847 for the 2019 Subaru Outback Wagon which provides an inch more ground clearance than the other hitch options for the Outback Wagon. The extra clearance is helpful when carrying a bike rack when driving in low ground clearance situations such as backing down a hill. I have attached an installation video for your reference. For an easy to load bike rack, I recommend a platform rack because you won't need to lift the bikes to put them on the...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Andrew K
Video by:
Joshua S
Video by:
Jonathan Y
Video by:
Aidan B
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Kathleen M
Updated by:
Wilson B
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
7/13/2023
If you are wanting something that is going to be less invasive, you can always check out part # C13410. This will not require any drilling and you will not have to adjust your muffler for this installation.