To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 5.0 out of 5 stars (25 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.So far so good. Install really wasn't that hard, the videos and instructions made it much easier. Definitely grab some silicone spray for the exhaust, and those couple bolts over the exhaust are tough to reach. All in all, I am pleased! Stoked to take the bikes out!
I would highly recommend this product and company. Ordering was simple and E-trailer kept me up to date with details concerning delivery and follow up once delivered. The installation instructions have the right amount of detail, and the installation went off without a hitch. (dad joke). My only recommendation during installation would be to use a 3/8 pin to hold the passenger side up and in place temporarily, align and secure the driver side with the hardware and then secure the passenger side with the hardware-gentle tapping of the horizontal bolts was necessary. Hitch looks great on my 2022 Telluride and the complete installation took an hour and 15 minutes
Great hitch that looks better and 1/5th the cost for the OEM hitch, plus the instructions made the install a breeze.
The instructional video says about one hour. I am an absolute beginner and it took me about 3 hours. A few tips. Silicone lube helps a lot with removal of the exhaust restrainers. The two restrainers nearest the rear passenger side tire were the hardest until I realized I could get these off with my bare hands. Wasted a lot of time trying to get a pry bar in position back there. The two horizontally positioned bolts were very hard to push through on that side as well. Use some lube. Also there is an aluminum heat shield above the exhaust which interferes with getting your bolt washer combo level as you push them through on this side. You may need to tap at this a bit to push it up as you muscle the bolt through. The guys in the video doesn’t trim the panel, but if you follow the measurements in the instructions and use a box cutter with a straight edge it works out fine. Haven’t towed with it yet. But install was manageable for someone like me with zero experience working on cars.
Easy to install. Video was exactly what to do. Only thing I installed plastic cover that we cut out after hitch was installed and it was easy too. Looks better with it installed. Thank you
The YouTube video of the installation and the printed instructions were spot on. There was no need for any extra tools and amazingly no drilling necessary. The hitch lined up perfectly.
First off excellent customer service and follow through!
Second the hitch has a fantastic fit and instructions are right on point.
Was very easy install.
Thanks e-trailer made this upcoming a ski trip easier!
The video instructions were very good. More detail could be added regarding inserting the long bolts on the side with the muffler. The flashing just above the muffler makes it more difficult to insert these bolts. I lightly tapped the bolt through with a long screw driver and hammer. Other than that it was as smooth as the video described. Took me and my son about an hour and 45 min.
Fast delivery. Excellent installation video. Quality parts.
the fit was exact. All the holes lined up and it is a solid hitch. The hardest part of the install was getting the rubber exhaust hangers back on the pins. Maybe I'm just getting old LOL
Easy to install! It took me about 45 minutes. Saves hundreds in comparison to getting from the dealer. Great product.
Solidly built, strong installation, and hidden.
Perfect. It was a little tough installing but it's solid.
Fitment was perfect
Great product. Fairly easy install and fits my Telluride perfectly.
Everything in the carton and installed just as they advertised. Easy install for an old guy.
Quick fast and easy to install Great pr oduct
Love it!!!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.