To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (889 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.I admit I was VERY apprehensive about attempting to install my own trailer hitch until I watched the video. I thought, "I can do this!", and I did. It only took a little over an hour and I am extremely pleased with the results. Good quality product and fast shipping. I will recommend eTrailer any chance I get.
It is an amazing hitch functions extremely well. Here is the drawback. The nut is to tall. When Installed installed the cover for the hole the the nut goes in the cover just pops off every time.
Jim
5/31/2023
It works fine, as you can see the top piece is just too tall for the bumper and a cap will not stay on it so it is a pain and costly to have to buy a new cap every 30 days.
I received notification when the Hitch shipped and a follow up notification when it was received. I am pleased with the build quality and finish of the Hitch. I found the unit fairly easy to install and recommend lowering the spare tire for clearance of the Torque Wrench. Hex Bit Socket required. Watch the installation video. The FishWire worked great. Saved $$$ by not getting the factory Hitch and Installation. Installed in about 45 minutes. Looks Great!
Brian
7/11/2023
Its been a year and I am very pleased with the build quality and finish has held up well....
I’m really happy with my new hitch. I refused to pay ridiculous prices with even more ridiculous installation fees. So, I’ve been keeping my eyes open for the last year or so. I found this site by accident. I had never heard of it so I did some research to make sure it was legit. I’m really glad I did.
This hitch is affordable and it took my no more than 20 minutes to install myself. I was happy about that too because it’s cold outside. It’s sturdy and will fit my needs which are towing small things like mowers, motorcycles, and pallets of pellets.
I did not lower my spare. If you want to use air/cordless tools you will most likely have to do that.
For the girls out there, you can install this on your own with a torque wrench, 19mm wrench, and 1/2 external hex bit (with 1/2 drive), in case you’re on the fence about it.
I bought the matte black version because I hate shiny things. I would recommend it if it fits your needs.
Thanks for everything. Git it in 2 days. Ship out same day orders.
2022 1.
7/1/2023
Great
Very easy install but you might need to buy a large drive socket for the top bolt. Tip, dont completely detach the fish wire from bolt before you get the nut started to avoid the bolt falling into the tube. Also dont completely tighten the 2 underneath bolts before tightening the top bolt otherwise you may not be able to replace the plastic cover cap.
The trailer hitch was great & easy to install. Whoever designed it was a genious. The people in your company are real professionals and a pleasure to work with. I'm very happy with my order even though there was a delayed delivery.
Very easy installation should work fine. One side fishing wire did not want to pull bolt through as easy as the other, good to have a long flexible magnet handy. Could not reinstall plastic cap to cover hex bolt as it sat to high.
I have used this heavily over the last year of having it and I can't say enough good things about it. Installation while a little difficult at times was easy. From different sized loads and trailers this item had held up without even 1 issue to this date. Would recommend to everyone.
Alex
5/31/2023
I have loved this so much I have convinced over a dozen of my friends to either consider purchasing or actually purchase this for their trucks.
Easy installation and looks great on my truck. Highly recommend!
EZ install. First, discard included instructions.
There is a better way. I came up with techniques to easily fish wire. Dont mount hitch yet, as per instructions. Find a semi-rigid "pull" wire about 2 feet. Tape one end to the "threaded" end supplied wire in kit. Fish the plain end of "pull" wire into outlet hole and out other end. Now thread bolt onto kit wire. Fish kit wire back thru and pull bolt out of outlet hole, and into hitch holes until bolts are protruding from hitch mounting holes. (Rest hitch on top of tall bucket) Tip #2. Dont completely removed threaded wire from bolt; pull/unwrap wire from bolt exposing 2-3 threads. (This prevents bolt from falling into hole). Start bolt onto these 2 threads,than completely remove kit wire. Tip#3. Leave both bolts loose, now place hitch in place (may need a helper here) insert main bumper bolt, tighten all bolts.
Jon G.
4/15/2021
I think you meant to say discard the included instructions when it comes to the fish wire? The instructions do have specs that you will need as well as other info for the installation so you want to make sure you hang on to the instructions.
Very good hitch, easy to install, took under 30 minutes once I got the 1/2" hex socket
James M.
5/24/2022
Its been a year now since installing the hitch and it works perfectly, pull a trailer with it every weekend.
The hitch installation was very simple and the fit was right on with no troubles. Carries the load of my Coleman 22ft trailer with no difficulty. The hitch is a Great Product. I would recommend it to anyone that asks me about the hitch
Foolishly I first purchased the knockoff [online vendor] version big mistake!
During install trying to torque the main bolt it stipped out forcing me to drill it out to get it off them the square nuts bent trying to torque them to specs! Do you self a favor and spend the extra for a better grade steel. Left is [online vendor] version!! Fits perfectly on a 2022 ram classic!!
Bought 1 year ago.. Pulled a trailer and a boat. No problems. Great customer service.
Erin
6/22/2023
Still working great. Pulls the trailer and 2 4 wheelers.
Quick delivery and easy installation I’m happy
The hitch fit perfect and the service that I had received from etrailer was awesome. Fast shipping. I couldn't be happier.
Duane
4/2/2023
Couldnt be happier, strong hitch ,no rusting ,no issues, very solid hitch
Today I installed my new trailer hitch and it was a perfect install and fit!!!
Easier install than changing a lightbulb. Hitch looks and feels stout. Matte black matches my exhaust tips too so that's a plus.
The hitch arrived and fit as it was supposed to. A lot of people complain about the need of a 1/2" hex bit for the install. That is in fact true. I was able to borrow one from work, but not many people are going to have that laying around. Everything worked as it should. The fish wires worked really good. Coating was good on the hitch. I have not used it yet, but I expect it to work fine. The required torque for the 3/4" bolt is not something the typical torque wrench will be able to do. I dont have a 3/4 torque wrench and again had to borrow the tool. I have torque wrenches up to 1/2" and that one was still coming up about 70lb-ft too short. Product seems good so far.
I’ve towed many things including cars since installing with no issues
After receiving hitch,I installed it. Was very impressed by quality of it and the ease of installing it myself. This was installed on a 2022 ram 1500 classic, and it was a perfect fit. All I can say is, if you want a hitch just goto e trailer and save your time and get a quality product from them. Definitely a grade A company.
Very easy to install, make sure you see the installation video. I recommend removing spare tire. Video says remove if you want but not necessary. It is necessary to get socket and wrench in. Other than that its a 20 minute project. Very happy with the quality of the hitch. Looks great too.
Excellent hitch. Easy to put on and great customer service. I was able to see where the package was from the moment I ordered it to the moment it arrived. Highly recommended
Install was easy and maybe took 15 minutes.video was a great help.
Do you have a question about this Trailer Hitch?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rlyons
8/11/2023
No problems at all! It is as though it was installed by a professional installer. Im very pleased with both the product AND saving $150 on an install.