1. Trailer Hitch
  2. etrailer
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Item # e98862
lowest price pledge
Retail:$290.66
Our Price: $119.57
You Save: $171.09
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 36 lbs
Quantity: 
In Stock
E98862 - 350 lbs TW etrailer Trailer Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. Lowest Prices for the best trailer hitch from etrailer. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e98862 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (357)
  • Q & A (21)
  • Photos
  • Why etrailer?

etrailer Trailer Hitch - e98862

  • etrailer
  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Visible Cross Tube
  • 350 lbs TW
  • 5000 lbs WD GTW
  • Custom Fit Hitch
  • 500 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty


Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.


Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



e98862 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Installation Details E98862 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98862

Average Customer Rating:  4.8 out of 5 stars   (357 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

- e98862
by:
2015 Honda Odyssey

Installed the hitch tonight. I did need some extra tools to complete the job and went back and forth to the store until I had all of the right stuff: Fastener Remover tool Wire brush After that, it was a very easy install. The videos on the website were clear and concise, this was the reason that this website is so key!! This was a great purchase along with the trailer light kit, also an easy install with the great instructional video! 580685



- e98862
by:
2011 Honda Odyssey

This review pertains only to the hitch that I installed on my 2010 Honda Odyssey. The hitch was arrow straight, nothing twisted or offset in the welding. The bolt mated to the wire lead required to pull it through the frame perfectly and slid into place with ease. The hardware included everything that I needed. Installation was literally so easy that I did it with my 11 year old son. I can't fathom having paid the additional $80 that it would have cost for local purchase and installation as I was able to chase the threads and install the hitch in well under an hour. A few things to note: If your vehicle has been on the road for a few years, as mine has, you are very likely going to need to purchase a tap to clean the threads in the frame where the bolts mount. An M12 x 1.25 tap will run you 6 bucks on Amazon, plus a bit extra if you need a driver to go with it. The hitch is just as heavy as you think it will be. I used a floor jack to lift it into place, but if you don't have one you'll want a friend to help here. I only needed to remove the rear most exhaust hanger. The video will tell you to drop that plus the one in front of it, but in my case that wasn't necessary. 569707



- e98862
by:

The original hitch arrived packed loosely in plastic and was damaged with lots of scrapes and exposed metal. I contacted customer service and they sent a second hitch with no questions asked. The second hitch arrived well packed in a cardboard box with bracing inside. The hitch was is excellent condition.It took me a little under an hour to install the hitch myself from opening the box to putting away the tools. You can install the hitch without lowering the exhaust, but you have to be a little creative with the wrench angles. I was also able to reinstall the plastic fairing on the drivers side by trimming it back a bit to get around the hitch. There's a little reinforcing rib that is perfect to cut along.Overall I am pleased with the hitch (we'll see how it goes through a few winters though) and the ease of installation. While the condition of the first hitch was disappointing, I am happy with how the situation was handled. 536762



- e98862
by:
2004 BMW 3 Series

Good rack, great price, poor fit out of the box . Exactly what we need on our minivan; we will use it for a bike rack 99% of the time. Construction looks great, hardware was perfect, shipping container was great. The big issue was fit. When put in place it was obviously short by about 3/8 of an inch, the holes would not line up. Took it off and I noticed the bends in the piece were not completed; they needed to be flatter where it joined against the frame. Given this arrive Friday evening, rather than return it I did the following to flatten it. 1) Take two pipe wrenches and clinch tightly on the flats where it attaches to frame. 2) Lift the hitch up so the wrenches are braced on the ground 3) Using the length of the hitch as a lever, complete the bend on the flat 4) Remove the pipe wrenches and repeat for the other side I was then able to complete installation as per the instructions. 785971



- e98862
by:

fit perfect... easiest install ever... done in less than 20 minutes 756200



- e98862
by:

I've installed 4 hitches on different vehicles and this by date was the best fit and easiest install ever. After reading the instructions took no more than 20 mins and my van now has a hitch. Not to mention it got to me in 3 days after purchasing. Couldn't be more pleased 716734



- e98862
by:
2011 Honda Odyssey

Great product and deserving of 5 stars. A couple of notes on installation. It took me about an hour and half for the entire job including tow hitch and wiring harness. YouTube videos and the instructions make it seem very easy, and it is in fact very straightforward ......until you have issues with your car. For the tow hitch. I had trouble removing the driver side plastic guard and one of the threaded holes on the passenger side had some significant rust that required a tap. The wiring harness installation is really quite difficult with big hands. My 11 year old daughter saved the day both fishing the harness through the trim panel to the rear fuse box and then also reaching into the back rear corner to attach the grounding strap to the grounding bolt. All-in-all, absolutely worth the five star rating. Just be realistic with your time for installation and be prepared for issues with your car including having the right tools for contingencies. 567702


Comments
Working great! No issues and still a 5-star product.
Steve - 09/22/2019

61411

- e98862
by:
Ford Edge

Works well, looks sharp. Install was relatively painless. I do wish it extended further to the edge of our odyssey's bumper. But whether this is an issue depends on your attached equipment. So check the measurement specs carefully. Very helpful videos and tutorials here at etrailer, thanks a bunch. 536701



- e98862
by:
2009 Honda Odyssey

great hitch, but third bolt on left side was impossible to put in, at least on my 2009 odyssey. treads on rest was perfect in Florida weather didn't need to extra thread it 657344


Comments
When a trailer hitch is constructed, the manufacturer uses softer steel in the side plates as opposed to the harder steel used in the crossbar and receiver tube. This allows the hitch to flex along with the vehicle to a certain degree. This flexibility can also allow the hitch to get slightly bent out of position during shipping and handling which can cause the bolt holes to be misaligned. The good news is that its very easy to fix this if you know a few tricks as shown in the linked article. All the mounting locations need to be utilized in order for the hitch to be used safely.
-- Mike L - 06/15/2019

56610

- e98862
by:

Car was only 3 years old but threads in frame were already lousy. Was a struggle to get bolts in even with wrench. Cleaning with the brush didn't do much. Ended up getting a 12x1.25 thread tap and used it to clean/rehab all the threads. Night and day difference! After the tap I was able to hand-thread the bolts in effortlessly with just my fingers. After that, hitch was easy to install by myself without the car jacked up. Just prop up one end of the hitch with boards while you're bolting in the opposite side. 694874



- e98862
by:
2010 Honda Odyssey

As always, etrailer has come through with a great product. Installation was easy and the satin finish on the receiver looked great. The installation video on their website made it a whole lot easier. 595152



- e98862
by:
2015 Honda Odyssey

Extremely well made product!! This quality at this price is a bargain. The install was effortless with the provided directions and bolt feed wire. Most hitches do not come with this contraption. If I ever need another hitch, I will only buy from ETrailer.com. 627873



- e98862
by:

Great, straight forward installation. I debated between the 'hidden' version and the bar version. As far as I can tell from pictures, the OEM hitch is hidden in the center area, but the sides stick down similar to this style, so it's doesn't look that clean. There is a Draw Tite 76025 version that looks to be hidden on the sides as well which gives the cleanest look, but a lot more effort to remove the bumper, etc. This one isn't very noticeable, and hey, it's a mini-van - convenience is more important than looks. I don't believe the Draw Tite gets the hitch up any higher, looking at all the other videos, pictures, etc. So I opted for the etrailer version instead of the Curt, as the price was a bit better. I debated whether I should put the rear end up on floor jacks to give me a bit more room. Feeling lazy, I didn't, and probably should have just to give me a bit more working room. Couple notes that might help - Removing the drivers side underbody panel (that you can discard when finished or reinstall), there's a step where you unscrew a Phillips screw that is tucked in the wheel well. My minivan has the black plastic mudflaps, and even though there is a hole through them to access that screw, I removed the mudflaps - made it way easier to get to (and re-install - I chose to trim the plastic fitting and re-install). Also, on the passenger side, you can work around the exhaust pipe, but it's kind of in the way - I should have pulled it off the hangers (see the Curt hitch video) - would have saved a few curse words and socket extensions, etc. Don't forget the bristle brush to clean the weld nuts. Also, thread the bolts in once without the hitch in place, to make sure they'll go in smoothly. Overall, a pretty easy project to complete. One other plus - the fish-wire bolt installation is brilliant - it does go in as easy as the video shows, and works great. My only complaint is that I wish I had a hoist... :) Good luck! 647022



- e98862
by:
2013 Honda Odyssey

We have been considering a hitch receiver for some time, primarily for our hitch-mount bike rack. We have held off because of the $1,500+ dealer cost, which includes a transmission cooler that we do not need. After seeing the YouTube video showing installation of this receiver, I decided I would do it myself for a fraction of the cost. Ordering was easy, and delivery was quick. Installation took me about an hour from start to finish, a bit longer than the 6-minute YouTube video, and the video was a great help. It looks great, and I can't wait to use it. 581870


Comments
According to the owners manual of the Honda Odyssey a transmission cooler is required when towing. The best transmission cooler option for the Honda Odyssey is a Derale transmission cooler part # D13503. I have attached an installation video of the cooler on a 2013 Honda Odyssey.
-- Heather A - 11/13/2018

45693

- e98862
by:
2014 Honda Odyssey

The product is fine but the instructions do not emphasize enough how seriously you may need to clean out the rusty threads under your vehicle in order to mount the hitch. Do yourself a favor and watch the video on cleaning out the threads. I’m pretty handy and it turned into a mess when one bolt broke off inside the vehicle and another nut broke loose from the chassis. Get a $3.00 battery terminal cleaner and some rust remover to prep the area before installing. Work the bolt in and out slowly WITHOUT trying to initially mount the hitch. Spend time under the vehicle just working on the rust without the hitch hanging down over you. I suggest spraying the area and let the chemicals work for a while. The primary goal when setting out on this project should be to get bolts to go smoothly into place. Finally, if you can’t get the bolts moving smoothly (by working them in and out) beware and don’t apply too much force. Stop and consider having a mechanic install the hitch for around $100. That might sound crazy, but a new set of bolts from etrailer is money and if one breaks off in your chassis you are in for hours of work and stress. It all worked out in the end but I learned a tough lesson and I hope this helps someone. 552026



- e98862
by: 11/23/2020

915942



- e98862
by:

Easy to install. Works great. 915939



- e98862
by:
2015 Honda Odyssey

Installation was simple using the supplied hardware and instructions. Fit and function met all expectations. Thanks again! 913335



- e98862
by:

Everything worked great. The only issue was no fault of the kit's - I had to go to the hardware store and get some tools so I could re-tap the mounting holes under the car. It is 10+ years old so the threads were pretty gunked up. 911078



- e98862
by:

Packaging wasn't great including allowing the wire brush that I ordered to be packaged directly against this hitch, and so there were several spots where the paint was worn through to the metal. Didn't want to take the time to return and get a new part, as I was needing it very soon. The fit was challenging, as the holes for the hitch were almost an inch wider than the corresponding holes on my vehicle. Took a couple hours of head scratching and trying different approaches to figure out how to make it all work. Once installed (and black paint purchased and applied to cover up the missing paint), it has worked perfectly for me ever since, and the price was good. 909690



- e98862
by:

Fast shipment, good product, thanks! 908062



- e98862
by:
2014 Honda Odyssey

Bolted right on, no issues 906235



- e98862
by:

I talked to your group before I bought this hitch, I also watched a video to see what was needed to do if I wanted to do this myself. I am handy , and have tools.... and after watching the video realize it could be done. I am very thankful for the thorough video showing me step by step on everything from start to finish. The only problem that I got stuck with was the passenger side thread bolt receiver was rusty because of no cover and took some time cleaning it with a wire brush and WD 40. I should have bought the brush they showed in the video .... but got through it anyway. Wish Honda would have put plugs to stop the rust on those two holes , they are there for someone to use and there is nothing to protect them. Overall.... I am happy with etrailer, and all the help from the video and customer service 905789



- e98862
by:

The trailer hitch works well. We have had it for a year and was easy to install and has been durable. Instead of using my truck all the time, using my van to tow things around has been great. 905210



- e98862
by:

897162


28
365
Show More Reviews

Ask the Experts about this etrailer Trailer Hitch

  • Bolts Won't Thread After Cleaning With Brush for Installing Trailer Hitch on 2007 Honda Odyssey
    If you weren't able to get the 12M x 1.25 bolts for the etrailer.com Trailer Hitch Receiver # E98862 started even after applying WD40 and cleaning out the weld nuts with a wire brush # 814092 on your 2007 Honda Odyssey the next step is to use the 12 mm x 1.25 Tap and Drill Bit # PTW8662 to use drill power to clean out the threads. Typically cleaning the threads with the brush will do the trick but since that isn't working for your application the tap is what you need. Let me know what...
    view full answer...
  • Ground Clearance of Trailer Hitch Options for 2014 Honda Odyssey
    For your 2014 Honda Odyssey, the etrailer # e98862 has a ground clearance of 10.75 inches. The Draw-Tite # 75270 has 10 inches clearance. The Draw-Tite # 76025 has the best ground clearance at 11 inches.
    view full answer...
  • Recommended 4 Bike Rack for 2015 Honda Odyssey
    I'll start off by saying that the only way you will be able to carry 4 bikes on your 2015 Honda Odyssey is if you've got a 2" trailer hitch like the etrailer # e98862; as long as you've got a hitch, you're well on your way. There currently aren't any trunk mounted bike racks that will carry 4 bikes. To carry 4 bikes I recommend using the Curt Platform Tilting Bike Rack # C18087 which is made from steel and covered with a heavy powder coating, so it will provide great protection from...
    view full answer...
  • Does etrailer Hitch part # e98862 Come with Everything Needed to Install on 2014 Honda Odyssey
    The etrailer hitch part # e98862 that fits your 2014 Honda Odyssey comes with all needed install hardware. You do not need to purchase anything else to install the hitch on your vehicle. I attached an install video for this for you to check out as well.
    view full answer...
  • What Size Thread Tap for Installing etrailer Hitch on 2008 Honda Odyssey
    Weldnuts on vehicles as old as yours are going to be pretty dirty. Your plan of ordering a thread tap at same time as hitch is smart and will save you time as it's the most efficient way to clean dirty weld nuts. The thread tap size you'd need to install the etrailer hitch # E98862 is M12-1.25 which is a pretty standard size but not always same size as every vehicle. The thread tap kit part # PTW8662 is the right size though and would be exactly what you need.
    view full answer...
  • Does Trailer Wiring Come with etrailer.com Hitch for Honda Odyssey E98862
    Trailer wiring harnesses need to be purchased separately from the hitches like the part # E98862 that you referenced since they are not sold together. You didn't list what year Honda Odyssey you have but for example the part # 118521 fits 2011 through 2017 models.
    view full answer...
  • Replacement Mounting Bolts for Trailer Hitch on 2007 Honda Odyssey
    Did you purchase the etrailer.com hitch, part # E98862, you referenced? Whichever hitch you have, use part # RHK and select the hitch manufacturer from the drop down menu and type the model number into the box. That will order the exact hardware kit that was originally included with the hitch you have. I've attached a link to all of our current hitches that fit your 2007 Honda Odyssey for you. If you don't know the model number of the hitch you have this may help. If it doesn't let...
    view full answer...
  • Does etrailer Hith # e98862 Fit 2017 Honda Odyssey SE
    Sounds like the hitch you attempted to install was bent in shipping which is more common than we'd prefer. That said the etrailer hitch part # e98862 is a fit and most likely would show up just fine and ready to bolt up. In some rarer circumstances the mounting flanges of the hitch get bent during shipping but can be bent back as long as there isn't obvious signs of stress like creasing or paint flaking.
    view full answer...
  • Recommended Trailer Hitch for 2003 Honda Odyssey
    For a trailer hitch for your 2003 Honda Odyssey, I recommend our etrailer Trailer Hitch Receiver # e98862. This trailer hitch has a 2" hitch receiver with a gross towing weight capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. Check out the video linked below for more details.
    view full answer...
  • Recommendation Between the Thule Camber 4 and Yakima Ridgeback 4 Bike Carriers
    The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98862 you referenced will have the hitch pin hole recessed 4-1/2 inches from the outer bumper. This will allow for compatibility with both the Thule Camber or the Yakima Ridgeback you referenced. The biggest difference between the two bike carriers for your application is the arm spread distances. The Thule Camber # TH9056 has outside cradle to outside cradle measurement of 13 inches. The Yakima...
    view full answer...
  • 4-Bike Rack Recommendation for a 2014 Honda Odyssey with 1-1/4 Hitch
    I really like the Yakima BackRoad 4 Bike Rack # YA44FR because it's a quality bike rack that is easy to use, cost-effective, and features 7" between the cradles (center to center) for a much easier loading experience of your bikes. The BackRoad comes with a cable lock for the bikes but if you want to add a lock to the bike rack itself then you can use part # Y07235. You'll likely need to use the Adapter Bar # Y02531 for your kid's bikes so that they will fit properly, and I also recommend...
    view full answer...
  • What is Difference Between Curt and etrailer Hitches for 2016 Honda Odyssey
    The only difference between the Curt hitch for your 2016 Honda Odyssey part # C13068 and the etrailer # e98862 is the powdercoat finish. The Curt has a gloss black finish and the etrailer has a matte finish that is harder to damage. Aside from that they are made the exact same. So I'd recommend the etrailer htich. The best trailer wiring harness would then be the part # 118521 as it has the easiest install and the most reliable converter box. I attached install videos for both for you...
    view full answer...
  • Bike Rack Recommendation For Easy Cargo Area Access on 2015 Honda Odyssey
    Hollywood Racks doesn't recommend opening the rear hatch or trunk of a vehicle once a rack has been installed for many reasons. First and foremost, it's an unsafe practice. The struts that hold up the liftgate on a minivan are only rated for a certain amount of weight. Having the extra weight on the liftgate could cause it to slam shut without warning, which could be extremely dangerous. Opening and closing the liftgate while it's installed can also damage the vehicle or the rack. If having...
    view full answer...
  • Could Rola Convoy Bike Rack Fit 2012 Honda Odyssey
    The Rola Convoy part # 59308-4 would fit your 2012 Honda Odyssey as long as you had a 2 inch hitch installed like the # e98862 and also would allow you rear hatch clearance when the rack is tilted.
    view full answer...
  • Is Fascia Trimming Required To Install Draw-Tite Hitch On 2014 Honda Odyssey
    In order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76025 on a 2014 Honda Odyssey you"ll need to trim the fascia in the center to allow the receiver tube opening to pass through and above the tail pipe. The reason you must trim the portion of the fascia above the tail pipe is that the hitch will come into contact with this piece if not remove. It is possible not to remove this piece but by not doing so you"ll put stress on other parts of the bumper which can lead to...
    view full answer...
  • Hitch and Bike Rack That Allows Rear Cargo Access In Honda Odyssey
    The Hollywood Racks Over-the-Top 2 Bike Carrier for Vehicles w/ Spoilers part # HRF2 is a nice choice for the 2015 Honda Odyssey however it is not a good idea to open the rear door with the rack installed. The rack uses the door for stability and may fall off if the door is opened. I have attached an installation video for the Hollywood Rack on a 2012 Honda Odyssey you would remove the rack the same way but in reverse. Since you would like to open your rear door with the bike rack installed,...
    view full answer...
  • How To Install a 7-Way Trailer Connector On a 2016 Honda Odyssey
    I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part # 118521 which is plug-n-play. Then you can convert this to a 7-way using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part # ETBC7L. The 7-way is easy to install; just plug the two 4-ways in, ground the white wire, then run the black wire up to the battery but that's...
    view full answer...
  • What Sort Of MPG's Will A 2015 Honda Odyssey Get While Towing
    I do have a device that will help to increase your fuel mileage while towing but unfortunately, I would not be able to give you any sort of accurate estimates on fuel mileage while towing as there are way too many variables involved for this. I recommend you reach out to others on towing forums who have first hand experience with your vehicle. In order to help you improve your fuel mileage you can use the Edge Insight CS2 Comprehensive Gauge Display part # EP84030 which has a feature...
    view full answer...
  • Bike Rack Solutions to Carry a Trike and 3 Bikes with 2011 Honda Odyssey
    The best option for that would be to use the Hollywood Racks Sport Rider SE2 Bike Rack for 1 Trike or Recumbent and 1 Bike # HR1450Z-E-TRKADP3 to carry the trike and one of the bikes and then a roof rack mounted bike rack option for the other two bikes. You'll need a hitch installed for the bike rack like with # e98862 which fits and gives you a 2 inch hitch with plenty of weight capacity. Then for roof bike racks the Malone Pilot TC part # MPG2103 is a great rack at a great price...
    view full answer...
  • Best Way To Carry Cargo on a 2016 Honda Odyssey
    I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
    view full answer...
  • Recommended Trailer Hitch Cargo Carrier for 2012 Honda Odyssey
    The 24x60 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs # C18153 is a great carrier for your desired use. The shank of the carrier is hollow so I recommend using the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span # 63232 which will lock it to your receiver but also hold it really tight so you will have almost no movement at the hitch receiver. You can use a cable lock like # e98891 to secure your cargo to the carrier and hitch through the chain loops. If...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Updated by:
Sarah W
Video by:
Zach D
Video by:
Jonathan Y
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.