Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Everything you need to replace 1 hub on your trailer fits inside of this carrying case. Inner and outer bearings (L44643) and races, and grease seal are all pre-packed in this hub. Included wheel bolts screw into pre-threaded flange.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (58 Customer Reviews)
Everything you need to replace 1 hub on your trailer fits inside of this carrying case. Inner and outer bearings (L44643) and races, and grease seal are all pre-packed in this hub. Included wheel bolts screw into pre-threaded flange.etrailer helped me in a couple ways regarding this purchase before I received package which was a big help. I was called by Kim O to make sure I wanted to order the practice and I did not so that save a headache. When the package stalled after they shipped it I reached out and was promptly emailed explaining. Thanks! The part is what I expected and got my little trailer back on the road. I will use them in the future.
Bought 2 to replace on 1970 tee nee boat trailer was a exact fit like these hubs have built in grease fittings
Perfect fit and they work as designed
I recently upgraded my 43 year old small boat trailer with parts from ETRAILER. New hubs, bearings, Bearing Buddy's, wheels and tires. Natalie L spent quite a bit of time on the phone with me to figure out what I needed and when it arrived everything was perfect. This is the first time I have replaced the hubs and wheels in 43 years. Timely service, great prices and I could not be more pleased.
Hubs fit perfectly. Will be good for years to come. Thank you
Great heavy duty hubs! Note that this kit doesn’t include the nut needed for the axle.
Great product. This was an extremely hard part to find until I learned about etrailer. I replaced the hubs on a boat trailer that has been sitting since the 80's. Hubs were greased and ready to go out of the box. Great packaging that is easy to keep one as a spare in a trailer.
Excellent service and good product. Went on trailer easily!
The inside bearing is so close to the grease seal that the rubber of the seal won't flex enough to allow the hub to go all the way on the axle; i.e. allow the seal to go on to the step up of the axle. I wouldn't tighten the nut any further thinking I might damage the bearings. I only use the trailer to launch a jet ski from the beach. No road use. So I just left it as is.
Easy to install and well put together.
I am very pleased with my trailer hub assembly. Essentially it made my trailer useable again since the old trailer hub was worn out. I was pleased that it came pre-greased and ready to install. Thank You!
The hub was pregreased and ready to install. The hub arrived on time and the instructions and video where very helpful. I have pulled the trailer on several occasions and the hub preformed as promised. I am very pleased and would encourage any one looking for quality trailer parts to shop at etrailer.com
Richard P.
3/21/2021
I am very satisfied with the hubs. I have taken the trailer on a couple of 500 mile round trips on top of a lot short fishing trips. The hubs are holding up very well.
I received 2 new 4 lug hubs and bearing buddy. All came in great condition the lugs were in special plastic cases to protect them. I replaced but hubs with ZERO problems from the new units. Great results when I wasn't sure what would happen. Very easy to replace the old bearings and being already packed with grease made it a lot cleaner.
The carrying case makes it convenient to take a spare hub assembly with you.
Excellent and fast service. Had an issue with one factory sealed box containing the wrong part - not etrailer's fault. Erica and the etrailer team got me the correct part shipped the same day I called. And they checked the box to make sure there was not another factory mistake. Really nice people to trade with.
Perfectly fit as a replacement for a boat trailer made in the 1960's.
Rachael H.
6/23/2017
Thanks for the feedback. We would love to see photos of your restoration work on your trailer.
Received in a timely manner (3 days after ordering) and I couldn't be happier. This is in its own carry case and comes greased with everything you need to slide it on, put the castle nut on and drop a cotter pin in. I am planning to make a longer trip up to Northern Wisconsin this coming weekend and wanted to have a spare hub for quick repair if something went wrong.This is the ticket for a reasonable price. Hopefully I wont need it but if I do I have it ready to go.
I have an old trailer with this type hub. Was easy to install and being prelubed was great too! Solid kit!
Everything went together well. My only concern was that there could have been more grease in the pre-greased bearings. Others have noted this in earlier reviews.
Plenty of information on product information on the website, making the selection easy. Fantastic order follow up and tracking information. Great product packaging product looks very well made. Should make for an easy and durable installation. Highly recomended!!!! Very happy!!!!
Product specs were listed clearly and helped to make an easy decision. They shipped quickly and arrived with everything I ordered. Have not yet tried them on my application but if they don't work it will not be etrailer's fault. Couldn't find these hubs anywhere else and wanted to put the same thing back on the trailer that I will be taking off.
Excellent replacement for my old boat trailer hub
Product is of excellent quality and retailer provided quick shipping. etrailer is the place to obtain all your trailing needs.
I did not realize relaxing a boat trailer hub would be this easy. With just one axle it has to be Right! Thanks
Excellent product, so easy to install, I really love the carrying case so that you may bring a extra bearing hub along on trips, just incase of emergency!!!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brian
10/13/2024
Still going strong with no problems at all