Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner bearing (L68149) and race, outer bearing (L44649) and race, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (80 Customer Reviews)
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner bearing (L68149) and race, outer bearing (L44649) and race, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.The hubs are good and came with grease but the bearings were not packed. One carrying case got destroyed during shipping, they were just thrown inside the box. You know how shipping employees treat packages these days. Hubs seem to be high quality. Time will tell.
I have a Lowe 1710 deep v fishing boat on a Karavan trailer. Very satisfied with the pregreased hubs as well as the knowledge and helpfulness of customer service. Delivery was prompt and I replaced both trailer hubs in slightly more then an hour. I will be a future customer.
good service knowledgeable people but not 5 stars because the waiting time for a timken bearing was more than a month out
I would have given this product an Excellent rating but the plastic storage box was broken on delivery. The storage box was the reason I purchased the pre-packed hub set; I planned on using the hub as an extra emergency roadside hub if one of my hubs ever failed. The pre-packed hub is a great idea for people who put a lot of miles on the trailers and know the cost associated with a tire or hub failing while on the road and this hub is worth the money just for the peace of mind.
Easy installation neatly packed and ready to install
Great wheel hubs no problems at all. I would certainly purchase again..
The staff at etrailer.com is awesome, I received my C.E. Smith trailer hud kit and everything is perfect. With all the different trailer axle configurations they go out of there way to try and. Are sure you have exactly what up you need and when you have an issue and need to return an item they work with you, no question asked.
Thank you for all the support and fast delivery. I will definitely recommend and purchase all trailer needs from etrailer.com Again!
One year later and the still are working great.
Very easy to install a real timesaver
It’s delivered ready to go. Greased up and ready to install immediately. The carrying case keeps everything together. This is perfect for a road traveler who wants some spare parts for on the road repairs.
Ordered Monday delivered Thursday on the trailer Friday 150 miles round trip to the lake Saturday great product
Always good to have a quality backup in case of roadside blowout
The online ordering was easy and customer service is the best,,,and will be putting in an order in a few weeks
Great service and very informative about the product that I needed.
So my 8 year old trailer had worn bearings and tires. I purchased wheels, tires and the CE Smith bearing kit from ETrailer.
My order arrived in 3-4 days and I received a follow up email. The wheel/tire combo is bolt on ready and OEM to my trailer. The bearing kit comes in a sealed plastic case and is a drop in part (pre greased). So in less than an hour I had a fresh trailer.
I drove my trailer to the beach (a 600+ mile round trip) loaded down. I had zero issues, so I am thrilled!
Only time will tell overall, but ETrailer is earning my trust. Cheers
The hubs seem like excellent replacements for my 30 year old trailer. It came with a nice hard case that I plan on using with my old hubs for an emergency kit. I docked 2 stars because both bearings weren't properly packed. Of course I damaged the grease seals during removal forcing me to order 2 new seals. Luckily grease seals are relatively cheap but still highly disappointed that the manufacturer over looked a vital part. I would still recommend this kit but be prepared to pack the bearings. I rarely write reviews but I hope this review helps someone in the future from making a costly and potentially dangerous mistake.
Tab that keeps lid shut arrived broken, making the case not able to close Bearings have grease on the outside but are not packed properly.
Great idea on a whole hub kit for on the road but not executed well.
Jenny N.
7/18/2022
It sounds like we missed the boat for packing on this order. I will have our customer service team reach out to you.
Jenny N.
7/18/2022
It sounds like we missed the boat for packing on this order. I will have our customer service team reach out to you.
Easy to install. Exactly what I needed
My old hubs were not bad. Whoever had the boat before me kept them greased well. Just took off wheels then nuts and washer that holds hub on and slide new one on. They are heavily pre greased some will push out the front which is fine just be prepared. So far everything is great. Came with new koter pin and nice case. I put my old hubs in the cases and will have in case of emergency. Highly recommend
New hub works great and fits the tapered spindle on our Calkins boat trailer perfectly. Very smooth wheel bearing rotation and easy to adjust. Arrived pre-packed with just the right amount of marine grease. Dust cap is a very tight fit and requires a pretty good tap to seat, so I'm confident that it'll keep the water out. Includes a zerk fitting to inject more grease if needed in the future.
Perfect package for an emergency repair. Fortunately I have not had to use it since the hubs and bearings I bought from etrailer.com have worked flawlessly. Many local trips and one 1,500 mile trip with no problems at all.
I'm glad I bought wheel hub and bearings thru these folk at etrailer. The hub assembly was sent right out, even with the Covid lock down. The product itself was ready to go// I'm a happy guy.
It was easy to install and was fast. I have ordered one for the other side of my pontoon trailer.
Nice spare hub kit. I don't even have to pack the bearings. I hope I never need it but as compact as it is I will store it under my truck's rear seat and it may save me some grief someday. I love the plastic carry case. Even came with lug nuts.
Although I love the convenience of the whole kit, the fact that the bearings were not packed disappointed me, they did have grease on them but that is not the same. Outers were easy but trashed the grease seals to take the inners out and pack them correctly.
GREAT customer service. I actually tried to order a different manufacturer's hubs but they were out of stock! Got an email within an hour of placing the order with recommendation of these CE Smith Hubs. They were CHEAPER! They were high quality and pre-greased!! Saved over $60.00 overall on my order! Cant say enough good!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
2/28/2024
Oh my goodness! I will have our Customer Service team reach out to you.