bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter
  3. 6 on 5-1/2 Inch
  4. For 5200 lbs Axles
  5. Hub
  6. 14-1/2 Inch Wheel
  7. 15 Inch Wheel
  8. 16 Inch Wheel
  9. 16-1/2 Inch Wheel
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2

Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2

Item # 8-213-5UC1-EZ
Our Price: $103.38
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 14 lbs
Quantity: 
Trailer Hubs and Drums 8-213-5UC1-EZ - For 5200 lbs Axles - Dexter
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter. Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2 part number 8-213-5UC1-EZ can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (27)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Hubs and Drums - 8-213-5UC1-EZ

  • 6 on 5-1/2 Inch
  • For 5200 lbs Axles
  • Hub
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • EZ Lube
  • LM67048
  • 25580
  • Dexter

Hub is designed for use on trailer idler axles. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included
  • E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Hub and drum are made in the USA


Specs:

  • Application: 5,200-lb E-Z Lube trailer axles
  • Wheel size: 14" to 16-1/2"
  • Bolt pattern: 6 on 5-1/2"
  • Grease cap flange diameter: 2.44"
  • Wheel stud diameter: 1/2"
  • Weight capacity: 3,000 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: LM67048 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: LM67010
  • Grease seal (included): 10-10
    • Inner diameter: 2.125"
    • Outer diameter: 3.376"

E-Z Lube-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-213-92 Dexter Trailer Idler Hub Assembly for 5.2K Axle with Hardware - 6 on 5-1/2 - EZ Lube

Replaces 8-213-5UC1-EZ





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2 - 8-213-5UC1-EZ

Average Customer Rating:  4.7 out of 5 stars   (27 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

by:

Good quality product




by:

Super fast shipping. Rare hub that nobody supplied locally so I ordered it through etrailer. Put it on hay wagon and hauled today. Etrailer's shipping time is awesome. Highly recommended


Comments
Hub still working after hauling thousands of pounds of hay on 1.5 hour trips....No problems
greg - 06/19/2017


by:

was happy with the whole experience... Every one was helpful and professional




by:

Good Job EtrailerI ordered 3 tire and rim packages with a couple of hubs for converting the modile home axle under my trailer to a normal lug hub. Just put them on tonight and hubs and tires spun centrally and were very smooth. The hubs were included in oversize boxes for the tires. The boxes were a little beat and the bearing kits were rubbing on the metal parts inside. Just a little more packageing would have prevented a little wearing on the small parts. Sorry guys, the tape just doesn't keep the parts in place to prevent damage. Good job E-trailer




by:

Great product and just what I needed for my trailer. very fast shipping also. I would purchase from them again.


Comments
They are still working like a charm. have not had any issues out of them.
Kenneth C - 03/10/2015


by:

Hey everybody I just wanted to let you know that I'm very happy with with etrailer because their customer service is great ,I bought a set of hubs and one of them wasn't right I emailed them on a Saturday and they reply the next day ,told them what was happening and they didn't hesitate to send me another one. ..so recommend etrailer.com to everyone the prices are great and the service better..thanks etrailer.com...




by:

These hubs are great. I am currently running these with about 100,000 miles on them. Give them a little grease and travel worry free. Ordered a new set as backups. You can’t go wrong with etrailer.com either. Their customer service is among the best I have ever experienced, they will go the extra mile to get you the answers and products you need.




by:

As usual, eTrailer delivers an excellent product at an excellent price. Service and communication are top notch. They always get my business for all my trailer/towing needs.




by:

Excellent product. Put on offroad trailer. Solid hub




by:

Worked great - attached to spindle welded to hudson bros trailer axle




by:

I am in Honduras but i brought a trailer from Texas. No parts here, but these folks filled my order promptly. Solved our problem!




by:

The hub and bearing combo I ordered came in pretty quick, and was a perfect fit, the races already being pressed in was a big time saver.




by:

I am very satisfied with axle stubs. I am using on a heavy-duty towable backhoe. Holding up real well.




by:

Works well for the trailer that was built.




by:

perfect fit and easy install




by:

Awesome, Excellent, Fast.
Will buy from
again in the future...


Comments
Its great, would buy again.
Dennis M - 10/15/2020


by:

Great quality parts, fast delivery, perfect replacement




by:

Arrived in PERFECT time to continue on with my boating trip! That makes me happy!




by:

heavy duty




by:




by:

completly satisfied




by:




by:

I received the hub today. So far, I am impressed. We will see how my customer likes it.




by:




by:



25
27
Show More Reviews

See what our Experts say about this Dexter Trailer Hubs and Drums

  • Is the Distance Between Bearings In a Hub an Important Measurement When Finding a Replacement Hub
    First, thanks for the kind words. We work hard to provide the best online experience in the industry. If the axle you have is a MOBILE home axle and not a motor home axle, then you will have to replace the axle. Mobile home axles are designed for one time use only and should not be reused. As a result of this one time use, there are very few replacement parts available. Now if it is an axle from a motor home then it is most likely a trailer axle and you will not need to replace it. If...
    view full answer...
  • Measurement Of Through Length Of 6,000 lb Capacity Hub # 8-213-5UC1-EZ
    The through length of the Trailer Hub Assembly - 5,200-lb and 6000-lb Axles - 6 on 5-1/2 - E-Z Lube, # 8-213-5UC1-EZ is 4-3/4 inches. I went out to the warehouse to measure it for you. This is outside edge to inside edge on only the hub, not the cap.
    view full answer...
  • Is Removing Hub From Trailer Axle Easy
    The part # 8-213-5UC1-EZ is an idler hub, but since it is not intended for brakes it does not have a drum attached to it that it can can be separated from. If instead you are asking how hard it is to remove the hub from the axle, the answer is it's pretty easy. It's pretty much removing a cotter pin, unscrewing the castle nut, and then sliding the hub off. I attached an install video that shows how to easily install and remove a trailer hub as well.
    view full answer...
  • Fit of Dexter Trailer Idler Hub Assembly for 6,000 lb E-Z Lube Axles
    Your photos did not come through but I think I can still answer your question. The hubs you get must be compatible with your spindle, and that means you will need to look at your hub bearings; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo...
    view full answer...
    Image 1 for
  • Recommendation For EZ Lube Hub That Fits Inner Bearings 25580 And Outer Bearings LM67048
    Yes. The EZ lube hub like this one is Item # 8-213-5UC1-EZ. It is designed for idler hubs and fits inner bearings like Item # 25580 and outer bearings like Item # LM67048. This hub is specially designed to work with Dexter EZ lube axles. Contact me if you have any other questions. Additional information and video attached.
    view full answer...
  • Replacement Hub Solution for Dexter 8-155
    Yes, we had a customer who was able to replace his Dexter 8-155 hubs with the # 8-201-5UC3-EZ that you referenced so they should work well for you. You can verify that this hub will work for you by pulling your current hub and making sure they have inner bearing 25580 and outer bearing LM67048.
    view full answer...
  • Are all 5,200 Lbs. Axle hubs Standard on all 5,200 Lbs. Rated Axles
    Most hubs will be standard in the weight capacities for that sized axle. This range is usually 5200 to 7000 lbs. However, you will need to know some specific information about the hubs before you can pick the correct product for your application. There are a few things you need to consider when choosing hubs for 5200 lbs. trailer axles. The first thing you will need to know is what the bolt pattern of the hub you want to replace. A hub assembly like # 8-213-5UC1-EZ for 5200 to 6000 lbs...
    view full answer...
  • Recommended Hubs for 5200-lb Timbren Axle-Less Trailer Suspension System
    Timbren does offer two 5200-lb-rated axle-less suspension systems that can be seen by clicking on the link provided. These accept either 6-on-5-1/2 idler hub # 8-213-5UC1-EZ or hub/drum assembly # 8-201-5UC3-EZ if your trailer will have brakes. Please note that these systems may require reinforcement of the trailer frame. These hubs' bolt pattern is slightly different than your Ford F-150's 6-bolt hubs. The two are not interchangeable and odds are that your wheels would not fit, or at...
    view full answer...
  • Idler Hubs to Replace Hub/Drums on 5200 lb Capacity Axle
    From what you describe, you have a 5200 lb axle. We do offer idler hubs compatible with a 25580 inner/LM67048 outer bearing which have a 6 on 5-1/2 inch bolt pattern. If you have EZ lube spindles, use # 8-213-5UC1-EZ or # 8-213-5UC1 for standard spindles. Both idler hubs assemblies include the inner and outer bearings and races, the 10-10 grease seal which has a 2.125 ID and 3.376 inch OD, the grease caps and lug nuts. I've linked to an install video showing the installation process...
    view full answer...
  • Hub Size and Axle Weight Rating to Fit Bearings 25580 and LM67048
    Based on the bearing sizes # 25580 and # LM67048, there are two possible hubs that will fit. The first has a wheel bolt pattern of 6 on 5-1/2 and fits axles rated for 5,200 lbs to 6,000 lbs. This hub can be purchased with the standard hub assembly # 8-213-5UC1 or the E-Z Lube axle hub assembly # 8-213-5UC1-EZ. Your bearing combination indicates that your axle capacity is 5,200 lbs. The other hub option has a bolt pattern of 6 on 6 and fits axles rated for 6,000 lbs. This hub can be...
    view full answer...
  • Replacement Wheel Stud for Dexter 8-213-5UC1-EZ 5200 lb Idler Hub
    According to my Dexter Axle representative, the correct drive-in 1/2 inch wheel stud for your # 8-213-5UC1-EZ idler hub is part # 7-122.
    view full answer...
  • Replacement Idler and Hub Drum Using LM67048 and 25580 Bearings with 2.25 I.D. Grease Seal
    It sounds like you have two 5200 or 6000 lb capacity axles with a 6 on 5-1/2 bolt pattern. If this is the case, we have some hubs that will work for you. If you have EZ lube spindles, you would need the # 8-213-5UC1-EZ idler hub, and the # 8-201-5UC3-EZ hub/ drum. If you have standard spindles, you would need the # 8-213-5UC1 idler hub, and the # 8-201-5UC3 hub/ drum. The hubs include bearings, races, a grease seal and dust cap but the included grease seal will have the wrong inside...
    view full answer...
  • Compatible Spindles for Dexter Hub 8-213
    For a Dexter 8-213 hub like # 8-213-5UC1 you can use Redline spindle # TRU57FRor for an EZ-Lube kit like # 8-213-5UC1-EZ you can use spindle # TRU37FR. Both spindles work with bearings 25580 and LM67048.
    view full answer...
  • Which Spindle is Compatible with the 8-213-5UC1-EZ Trailer Hub Assembly
    For a spindle that will work with the # 8-213-5UC1-EZ Trailer Hub Assembly, you will want to use the EZ Lube Spindle # TRU37FR. This EZ lube spindle has a 2,600 pound capacity, making it great for 5,200 pound trailer axles. I have attached a photo showing the dimensions of this spindle for you. This spindle is compatible with the LM67048 outer bearing and 25580 inner bearing, as well as the 10-10 grease seal that come with the # 8-213-5UC1 hub and drum.
    view full answer...
    Image 1 for
  • Availability of High Rated Trailer Spindle
    The highest capacity trailer spindle we offer is the part # TRU37FR which is for 5,200 lb axles. The diameter is 2-1/4 inch. For a hub to fit this spindle we have the part # 8-213-5UC1-EZ which has the same capacity and a 6 on 5-1/2 inch bolt pattern.
    view full answer...
  • Replacement Wheel Bearings for Dexter 5,200 lb Axle
    The Replacement Trailer Hub Bearing # 15123 and the Replacement Trailer Hub Bearing # LM67048 have the same inner diameter so both would fit the spindle correctly. The race inside the hub is where the difference in bearings would be, so if you traded out the entire hub to pair the bearing with the corresponding race there wouldn't be an issue.
    view full answer...
  • Replacement Seal for Dexter Trailer Hub 8-213
    Yes we have the bearing kit part # BK3-310 which comes with the correct seal, bearings, and races for your Dexter hub # 8-213-5UC1-EZ.
    view full answer...
    Image 1 for
  • 5,200LB Trailer Axles For a Tandem Axle Car Hauler 80" Spring Center and 95" Hub Face
    You will need the Dexter Trailer Axle # 6340624 and the Dexter Trailer Axle w/ Electric Brakes # 6340624-EB. These are 5,200lb axles with the one having a plain spindle and the other outfitted with electric drum brakes and a 6 on 5-1/2" bolt pattern. Do be sure to verify the local laws in your area for trailer brakes as most now require both axles to be braking axles on trailers over a certain weight. Otherwise we do offer the Dexter Trailer Idler Hub Assembly # 8-213-5UC1-EZ which you...
    view full answer...
  • Replacement Hubs for Dexter 5200-lbs Axle
    I have a solution for you, but there is not an available hub that uses those bearings and also has a 5 on 5 bolt pattern. Also, the # LM67010 you're referring to is bearing race that is found with the # LM67048 outer bearing, so you'll need a hub that takes the # 25580 inner bearing and # LM67048 outer bearing with the # LM67010 race. To replace these hubs you'll want to use the Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2 # 8-213-5UC1, which come with the above mentioned...
    view full answer...
  • Idler Hubs and Hub/Drums That Use Bearings 25580 and LM67048
    All idler hubs and hub/drums that use your bearing set # 25580 and # LM67048 appear on the linked page. For the idler hub use either standard 6-on-5-1/2 hub # 8-213-5UC1 or EZ-Lube hub # 8-213-5UC1-EZ. These include seals with a different I.D. so you'll also need 2.250-inch I.D. seal # GS-2250DL. For a 6-on-5-1/2 hub/drum use either standard model # 8-201-5UC3 or EZ-Lube model # 8-201-5UC3-EZ. Again you'll need to add the alternate seals # GS-2250DL. These various hubs use either a...
    view full answer...
  • Timbren Axle Less System Recommendation to Replace Axle on Mobile Home Trailer
    Since your spring center dimension is 76 inches the best recommendation we can provide you with would be the part # A35RS545. This is a universal axle design that would work great on your mobile home trailer and comes with hubs as well. If you really want to go with a straight axle you would instead need to find a dealer near you who can order you in some custom axles to the dimensions you need. You will need to give them the hub face to hub face dimension as well as the spring center...
    view full answer...
  • Timbren Axle Less System Setup for 6 on 5-1/2 inch Bolt Pattern
    The lug pattern of 6 on 139.7 in inches is 6 on 5-1/2 inches which is a very standard bolt pattern for trailer wheels. Which for a Timbren axle-less kit that will fit a hub with that bolt pattern you would want the part # ASR5200S01 which has a 5,200 lb capacity and then the hubs part # 8-213-5UC1-EZ.
    view full answer...
  • Replacement Grease Seals Needed for 5.2K Dexter Axle Beam with EZ-Lube Spindles
    Thanks for the info! Looks like you got the Dexter Trailer Axle Beam with E-Z Lube Spindles # 6340624 and the Dexter Trailer Idler Hub Assembly # 8-213-5UC1-EZ. This means the grease seals you need are the 10-10 which comes in a pack of 2 with part # RG06-090.
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Patrick B
Installed by:
Patrick B
Employee Conner L
Installed by:
Conner L
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.