Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs
(35 reviews)
Price: $255.20
In Stock
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs
Item # 8-219-13UC3
Retail:$270.02
Our Price: $255.20
You Save: $14.82
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (35)
- Q & A (0)
- Photos
- Why etrailer?
Dexter Axle Trailer Hubs and Drums - 8-219-13UC3
- 8 on 6-1/2 Inch
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- Hub with Integrated Drum
- Standard
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 9/16 Inch Stud
- 14125A
- 25580
- Dexter Axle
This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb to 7,000-lb trailer axles with #42 spindles
- Wheel size: 16" to 17-1/2"
- Drum dimensions: 12" diameter x 2" wide
- Works with 12" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Grease cap flange diameter: 2.72"
- Wheel bolt diameter: 9/16"
- Weight capacity: 3,500 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 14125A (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 14276
- Grease seal (included): GS-2250DL
- Inner diameter: 2.25"
- Outer diameter: 3.376"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
8-219-13UC3 Dexter 12" Trailer Hub and Drum Assembly for 5.2K to 7K Axle with Hardware - 8 on 6-1/2 - 9/16" Studs
Customer Reviews
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - 8-219-13UC3
Average Customer Rating: 4.5 out of 5 stars (35 Customer Reviews)
This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Richard11/17/2021
I received 3 boxes all of which had some sort of damaged or destroyed parts in it. All of the bearing kits are garbage, I will need replacements. The back plate and pad assemblies were ok, only two I had to installed the adjuster bolt back into and inspect for damage, but only received 2 of 4 nut and plug kits seen in pictures attached. Everything was improperly boxed, boxes are way too large for these components and hardware/bearing kits were packaged with very heavy components. Bearing kits should have been shipped separately in a small package. Bearing kit was also not in a proper bag, if not a ziploc at least tape the bag shut. I hope the drums are ok, I will have to grind on 2 of them just to allow the wheel to mate properly. I will have to measure all of the races and drum dimensions to ensure they are not warped or bent in any way. Extremely unhappy with this purchase. What a waste of components.
Comments
I will have our customer service team reach out to you.
-- 
Jenny N - 11/19/2021by: Jay M.09/15/2015
I ordered Dexter backing plate assembly and drum. Great prices! The drum came with races, bearings and grease seal. Everyone else that I checked with, races, bearings and the were extra and at higher price! I received all the items when expected. I would definitely recommend etrailer to anyone looking for great prices and customer service. Thank you etrailer
Comments
Wow! it’s already a year?. So far so good. No problems with any of the parts I ordered..
Jay M - 09/14/2016by: Olemax03/10/2017
I bought these to use on a fairly heavy (about 12k #, loaded) 5th wheel. These were bought to replace ones previously purchased w/ 1/2" lugs. I didn't realize there was a difference until they were already installed.
Now everything is working beautifully, except I'm now in the middle of replacing the chinese-made wheel bearings that came with the replacements from Etrailer, the reason for 3 stars, vs. 5.
Not only is the origin questionable, but the bearings and cups were shipped loose in a bag with the rest of the hardware (lug nuts, etc.) Precision bearings must be individually wrapped, boxed, and never touched directly by human hands, to prevent corrosion, and contamination which lead to early failures. Sorry, but these things are only good for low-speeds, and short distances, such as farm equipment.
Comments
The hubs and drums are working well after a season of camping, which didnt see more than a couple hundred miles of travel.
Olemax - 03/24/2018by: Kelvin01/02/2018
Product was shipped quickly and very well packed , absolutely no box damage for such a heavy item. The hubs look well made and came with all the hardware. Bearings are made in china but what isn't these days my advice is to purchase a bearing grease packing cone so you insure your bearings are fully packed . Everything fit perfectly .
Comments
I couldnt be more satisfied with my purchase I have logged over 10000 miles on my rig since I installed my new brakes & drums . just rotated my wheels and inspected my bearings, they look great!
Kelvin - 01/02/2019by: Joe11/15/2013
I recently borrowed a trailer from a friend of mine and it had to have been infested with grease worms. Needless to say, burnt up a bearing and spit the hub off before I made it to load. I found the parts I needed on this website, but had to purchase seals and dust caps I didn't need along with a kit as well as the correct seal and dust cap for my trailer. I was also disappointed when the EZ LUBE dust cap I purchased did not come with the rubber access plug. I got it put back together, and with a little duct tape to cover the dust cap, the tractor will be moved tomorrow.
by: Andy06/19/2019
Brake drums and backing plate assembly had great availability and pricing was excellent , shipping was fast...
Comments
Excellent ! I have had no issues at all. Still working great..
andy d - 06/20/2020by: William 01/18/2022
all is good
by: brad s12/07/2018
Looks like an exact replacement hub for dexter 7k axle
lost a brake shoe on a new 42 foot 2019 forest river fifth wheel, overheated the bearings and seal,
this has the same bearings as the original, yes, bearings are from china but so are the original hubs and bearings from dexter,
I bought 4 of these a few years ago to update our previous fifth wheel a 32 foot nuwa
ran them for over 8k miles with no problem
by: Stan07/01/2015
I made a big mistake and ordered the wrong hubs for my trailer. Called etrailer and got a return authorization and expedited the correct ones. Delivered on time and fit great.
Everyone at etrailer and the on line info was very helpful.
by: Kelly01/30/2020
Great quality! Made in USA. Fit perfec tly!
by: Darrell Block08/30/2019
The product, Dexter brake drum assembly, was exactly as advertised and delivered as promised. I could not have asked for any better product quality or service.
by: Joe06/15/2020
Quick efficient and economical
Superb service
Got us rolling again!!!
by: Keith Halsey08/02/2015
Had some rust on outside bearing race but I think it cleaned up good enough that it won't be a problem. Otherwise very happy with transaction.
by: Steve 08/12/2021
Same or better than original hubs. Packaged well and arrived 100% intact.
by: Kendra05/10/2021
Products are good quality and came in q uickly.
by: Sidney 08/17/2020
Order arrived ahead of time, everything was complete. Will definitely use Etrailer again.
by: Ken C05/17/2019
Everything looks good. I purchased this hub assy a a spare for my 50ft Featherlight and thankfully have not had to use it
by: Tim05/04/2019
Product arrived damaged. The bearings and grease caps are damaged. Retailer posted a credit due to the problem. Great company a fast reply on products.
by: Jessica08/07/2018
Your team member was very helpful!! I had tried 2 other companies who just shot me down your guy went the extra mile to get me the right hub!!! Thanks!!!
by: Adam 02/22/2021
Fit excellent, exactly what i expected.
by: Universal towing11/20/2014
It was a pleasure doing business with them. Receive the item quickly and at a great price. My customer was very please with how fast I got the job done. Will definitely do business in the future.
by: Tyler 10/08/2019
Exactly what I needed and works well!
by: George 03/19/2021
Comments
Couldnt be happier. Heavy duty USA made products. I pull with peace of mind.
George - 03/20/2022by: Brian 05/10/2020
Exactly what was needed and dexter genuine parts
by: Debra 03/26/2020
What we needed for the Big Tex trailer.
25
35
Show More Reviews
Ask the Experts about this Dexter Axle Trailer Hubs and Drums
- Hub & Drum Assembly 8 lug for a 2007 Kaufman 3 Car TrailerYou will need to remove the existing trailer hub from your axle to be able to find the correct hub and drum assembly replacement for your trailer. The things you will need to know are listed below. Inner Bearing Part Number Outer Bearing Part Number Grease Seal Part Number Inner Diameter of the Hub if it has Brakes Width of the Brake Pads on the Brake Assembly Mounting Pattern for the Brake Assembly Bolt Pattern for the Wheels on the Trailer Wheel Stud Diameter for Lug Nuts on the Trailer If...
view full answer... - Identifying Replacement 8-Bolt Hub for Jayco Designer 5th WheelIn order to select a correct replacement hub for the damaged unit on your Jayco 5th Wheel trailer you will need to match several identifiers from the original. First, you will want to note the axle capacity, which is usually found on a sticker or plate on the axle. Next you will need to pull the bearings and grease seal to obtain their part numbers. Of course you also need to choose a new hub with the same bolt pattern as the original so that your existing wheels will mount. The linked...
view full answer...
- Wheel Stud Length on Dexter Trailer Hub and Drum Axxembly # 8-219-13UC3I went out to the warehouse and measured the studs on the Dexter hubs, part # 8-219-13UC3, and they're 2-1/2 inches long. So these should work great for your trailer.
view full answer... - Center Bore Diameter for Dexter Trailer Hub and Drum Assembly With 8 on 6-1/2" Bolt PatternThe pilot hole for your wheel will need to be 4-3/4" or more to be used with Dexter Trailer Hub and Drum Assembly # 8-219-13UC3. This is a lug-centric hub which uses lug nuts to secure the wheel to the hub and your wheel will need to have an 8 on 6-1/2" bolt pattern to work with the hub.
view full answer... - Compatibility of Dexter Drum Hub on Lippert Axle of 2017 Jayco North Point 5th WheelThe Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs # 8-219-13UC3 will fit on your Lippert axle. They use the same size bearings and seal.
view full answer... - Replacement Hub Recommendation for Hub Stamped 8-219Since you said your hub says 8-219 that would indicate that you need the Dexter hub part # 8-219-13UC3 as a replacement. This is a hub for higher capacity axles between 5,200 and 7,000 lbs and has a bolt pattern of 8 on 6-1/2 inches.
view full answer... - Hub Recommendation to Replace Lippert Hub 141290We don't have that exact part number but for basically the exact same hub except made by Dexter you'd want the part # 8-219-13UC3. This is the sam 6k-7.2k hub with an 8 on 6-1/2 inch bolt pattern that uses 9/16 inch studs just like the one you referenced. I attached a review video for this hub for you to check out as well.
view full answer... - Hub and Drum Assembly with 8-on-6-1/2-Inch Bolt Pattern and 9/16-Inch StudsDexter Axle part # 8-219-13UC3 is a hub-and-drum assembly rated for 5200-7000-lb axles with an 8-on-6-1/2-inch bolt pattern and 9/16-inch studs. This hub comes complete with lug nuts, bearings, races, seal and grease cap. This unit uses the same bearing set, 25580/14125A, as your existing unit. Two linked videos illustrate this item and an example of a hub/drum installation.
view full answer... - Hub and Drum # 8-219-13UC3 with EZ Lube Grease Cap RecommendationYes, we do offer the Trailer Hub Assembly part # 8-219-13UC3 with the EZ lube grease cap. For that you would want the part # 42866UC3-EZ.
view full answer... - What Size are the Studs for the Trailer Hub and Drum Assembly # 42866UC3-EZThe studs on the trailer hub and drum assembly # 42866UC3-EZ, are 1/2 inch-20. The assembly comes with lug nuts, bearings, grease seal, and a dust cap. The bolt pattern is 8 on 6-1/2. If you needed the same hub and drum assembly but with the 9/16 inch studs, use # 8-219-13UC3.
view full answer... - Can Taskmaster Modular Wheel LT589DMPWX be Mounted to a Dexter Hub with Flange NutsYes, you could use flange nuts with wheel # LT589DMPWX but the hole size on this wheel is 5/8 and the hub and drum # 8-219-13UC3 has 9/16 inch studs. For a similar hub and drum with 5/8 inch studs you can use # 8-219-18UC3. It has the same bolt pattern and uses the same bearings and seal. It just has the 5/8 inch studs instead of 9/16.
view full answer... - Thread Pitch of Dexter 9/16 Trailer Wheel Lug Nut STN569On Dexter 9/16-inch lug nut # STN569 the thread pitch is 18-TPI. I went to our warehouse and did a test fit of this lug nut on Dexter hub/drum # 8-219-13UC3, which meets your description of an 8-on-6-1/2 Dexter hub with 9/16-inch studs for 7K axles.
view full answer... - Stud Length for 5.2K - 7K Dexter Trailer Hub and Drum AssemblyThe studs on the Dexter Trailer Hub and Drum Assembly # 8-219-13UC3 are just over 1-1/4" long so they will be able to accommodate the 3/4" thickness of your aluminum wheel just fine.
view full answer... - How to Choose a Replacement Dexter Hub/Drum AssemblyDexter hub drum assembly # 8-219-13UC3 is a replacement for your hub drum according to my contact at Redneck Trailer Supply. This is rated for 7K, has a 8-on-6-1/2 bolt pattern and 9/16-inch studs. You can also identify compatible replacement hub/drums for your trailer by matching up a few characteristics from your existing set up. You'll need to match up the bearings used, the hub's bolt pattern and your axle weight rating. The linked photo shows the usual appearance of bearing part...
view full answer...
- Could Cap of Dexter Hub # 8-219-13UC3 be Replaced with EZ Lube CapYes, you could replace the dust cover/cap of the # 8-219-13UC3 with an EZ lube style cap and you'd basically have an EZ lube hub as that's the only difference. For that you'd only need the # rg04-120 for a pair and you'd be set.
view full answer... - Brakes and Hubs for Rockwell American 7000lb Torsion Trailer AxlesThe two part numbers you mentioned are exactly the two Dexter part numbers you'd want! The brake assemblies part # 23-464-465 are a pair of self adjusting brake assemblies with a 7k capacity and then for brake/hubs you'd want the part # 8-219-13UC3.
view full answer... - Replacement Hub and Brake Assemblies for Dexter 8-219 Wheel HubsYou have some options with the 8-219 for replacement parts. These kits will include new brake hubs, bearings, races, seals, caps and wheel nuts. 1/2" Wheel Studs Grease Cap # 8-219-4UC3 1/2" Wheel Studs EZ-Lube Cap # 8-219-4UC3-EZ 1/2" Wheel Studs Oil Bath Hub # 8-219-9UC3 9/16" Wheel Studs Grease Cap # AKHD-865-7-1-K 9/16" Wheel Studs EZ-Lube Cap # 8-219-13UC3 5/8" Wheel Studs EZ-Lube Cap # 8-219-18UC3 The Dexter Electric Trailer Brake Kit # 23-180-181 will require the brakes to be...
view full answer... - Fit and Compatibility of Upgraded Hubs on a 84 Eager Beaver 9 Ton Tri Axle TrailerYes, the # 8-219-13UC3 will fit onto your 84 Eager Beaver 9 ton tri axles. Your old outer bearing # 15123 has the same inner diameter as the # 14125a on the 9/16 stud # 8-219-13UC3 hub. Some important things to know about this new hub compared to your old ones is that the bolt pattern will change from a 6 on 5-1/2 to 8 on 6-1/2 bolt pattern. Also the bearings you will need to use will be different, even though they will both fit the spindle the new hub will require the use of the new...
view full answer... - Tandem Axle Equalizer Kit for a Trailer with 10,000 Pound AxlesTandem axle trailer equalizer kit # HAP-258-01 isn't a 2-piece equalizer set. It has 2 equalizers and 2 hangers. The equalizers are 14-1/4 inches long though. If the recommended spring is longer than the old springs then the equalizer kit still may work for you. Otherwise we have kits with longer equalizers including # HAP-158-258-02 which has 18-3/8 inches long equalizers.
view full answer... - Spindle Recommendation for Use with the Trailer Hub and Drum Assembly # 8-219-13UC3The Trailer Hub and Drum Assembly # 8-219-13UC3 that you referenced is designed to fit a number 42 spindle like the part # TRU57FR.
view full answer... - Replacement Brake Magnet for 12 Inch Dexter Braking AssembliesYes, the Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies part # AKBRKR-M12 which is the same as part KB12E-06 will work for you. The Dexter Trailer Hub and Drum Assembly part # 8-219-13UC3 that you referenced is for a 12" braking assembly so if this is the hub/drum that you have then the above magnet will work great for you.
view full answer... - Can 1/2 Inch Wheel Studs be Changed to 9/16 Inch Wheel StudsIt may be possible to change your studs from 1/2" to 9/16" so long as the studs are drive-in (as opposed to threaded); also, the length and knurl diameter needs to be the same. For example, the Kodiak Wheel Bolt - 9/16" Diameter x 2-1/2" Long # K916WB25 has a 0.685" knurl diameter. So you do need to have some very specific measurements, otherwise you will need to change your hub to get that size wheel stud. I have added a link to a video review for you to check out as well as a link to...
view full answer... - Should Hub and Drum Assemblies Have Wheel Bolts That are the Same on Both Sides of the Axle?You should have the same wheel bolt sizes on your hub and drum assembly; parts should be uniform on both sides of your suspension to minimize any potential issues as well as rectify those issues should they occur. Since you know you have axles rated for 7,000 lbs and you know that your drums have 8-219 stamped on them, replacement assemblies are available, though I highly recommend confirming what you need by taking apart your hub assembly and looking at the bearings themselves; wipe away...
view full answer...
- Replacement Trailer Brake Assembly and Hub/Drum for 2019 Forest River Cedar Creek 37TRH 5TH WheelThe Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-465 is the replacement for your passenger side brake assembly. This matches what was put on by Dexter. The Dexter Trailer Hub and Drum Assembly # 8-219-13UC3 matches what was originally put on your 2019 Forest River Cedar Creek 37TRH, with one exception. You axle has the E-Z cap that you can either transfer to the new hub assembly or the Hub Grease Cap # 21-43-1 and Rubber Lube Plug # DC-RP can be used as a replacement.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer hubs and drums for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer hubs and drum information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Hannah L
Updated by:
Mike S
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.