1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 5 on 5 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. Standard
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5

Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5

Item # 84556UC3-EZ
lowest price pledge
Our Price: $119.27
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
84556UC3-EZ - For 3500 lbs Axles Dexter Axle Hub with Integrated Drum
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 part number 84556UC3-EZ can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (44)
  • Q & A (25)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 84556UC3-EZ

  • 5 on 5 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • Standard
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • L44649
  • L68149
  • Dexter Axle

This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 3,500-lb trailer E-Z Lube axles with #84 spindles
  • Wheel size: 13" to 15"
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Works with 10" brake assembly
  • Bolt pattern: 5 on 5"
  • Grease cap flange diameter: 1.98"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,750 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube-Compatible Hub for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


008-249-95 Dexter Trailer Hub and Drum Assembly - 3,500-lb Axles - 5 on 5 - EZ Lube

Replaces 84556UC3-EZ






Customer Reviews

Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 - 84556UC3-EZ

Average Customer Rating:  4.8 out of 5 stars   (44 Customer Reviews)

This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

- 84556UC3-EZ
by:

Last Saturday, after several weeks of research, my wife and I purchased a trailer. It had everything we wanted except for brakes. I asked the dealer if they could install brakes, he said it would take weeks if not longer for him to get the parts and then he would have to arrange for them to be installed. I told the dealer that I had already done some preliminary research on eTrailer.com for brake parts. On a long shot, I asked the dealer if he could beat eTrailer.com prices for the brake parts and if so I would install. To the dealer's credit, he told me I would be much better off getting the brake parts I needed on my own. So, late Sunday evening I went onto the eTrailer.com website. After taking a couple of measurements to ensure I was ordering the correct parts, I placed the order. Their website is user friendly and intuitive, and the tutorial videos are excellent. Early Monday morning I got a message from one of eTrailer's employees notifying me that my parts had shipped. He also offered his services if I needed anything further or if I had any questions. I did have questions, so I called him, I wanted to confirm that I had ordered the correct bolt pattern for the hub/drums. Within a couple of minutes we confirmed that I had taken the correct measurements. The reassuring part was, he said if you find the hub/drums are not the correct ones, let me know and we will get a return label out to you and get the correct parts out to you. By early Thursday afternoon the parts had arrived. I had already watched the installation tutorial video that is on their website. Following the video process, the install was straight forward and PAINLESS. This company is so refreshing!


Comments
Thanks for the follow up. For almost 10 years now, I have been very happy with the service, products and value that I get from etrailer. So much so, that I refer friends and family to your website as their needs arise. As the mechanic in the family, and around the neighborhood, I often have people approach me for help. Several times a year I find myself referencing etrailers website to find a part we need or that will make a job easier to complete. Additionally, I CANT SAY ENOUGH how helpful etrailers on line video library has been with installations and to help answer questions or trouble shoot problems. I really appreciate that etrailer would take the time and resources to build such a library to help their customers.
Ken - 11/15/2017



- 84556UC3-EZ
by:

Easy to install, helpfull staff and fast shipping . I installed a switch to turn on all my brakes for loading and I turned it on to check the brakes and when I released it I herd the brakes adjust (almost felt giddy) no more crawling under the trailer for adjustment! You cant see any difference in the trailer but, i know my brakes will work for a long time to come. THANK YOU etrailer.com for an easy pleasant experience and all of the help in the past. you have made me want to come back for future parts.



- 84556UC3-EZ
by:

Fit right (thanks to etrailer staff for asking the right questions) easy to install. Kinda wish the adjusting holes were a bit bigger, but they work.



- 84556UC3-EZ
by:

I installed these Dexter 10" Nev-R-Adjust Electric Trailer Brake Kit with Hub & Drum Assembly on my 72"X10' trailer (that came equipped with a Dexter axle) to help ease the brake load as well as preventing rotor warping on my F150 especially during heavy loads. I have pretty much eliminated any 'push-thru' effect when braking especially for the unexpected quick stop(s). They were easy to install and (so far) have been low/no maintenance.



- 84556UC3-EZ
by:

Heads up!! ordered 4 sets of hub, drums and brakes over two years ago for a project I've been slowly working on. when I received the items, I noticed the packaging was damaged and reported it to etrailer. 2 years later, I finally went to use the items and discovered the bearings, caps and races had been damaged. I notified the management at etrailer and within a week had complete replacements. What company in this day and age is willing to stand behind a damage claim two years on? Truly remarkable customer service and willingness to go the extra mile. etrailer, You've won me forever as a devoted and satisfied customer. you guys are rock stars! Thank You.



- 84556UC3-EZ
by:

Same as I used as replacements on my tandem trailer, Dexter is the best manufacturer



- 84556UC3-EZ
by:

I received these quickly and they were well packaged!



- 84556UC3-EZ
by:

Perfect fit and arrived faster than expected. 5 stars!!!



- 84556UC3-EZ
by:

Have not installed it yet so I can't review the product. I can tell you that etrailer's customer service is top notch. I called about a shipping delay after I placed my order. They assured me it would only be a day and not a week like my order confirmation said. Called back the next day and my order was already shipped. Good people to do business with.



- 84556UC3-EZ
by:

I upgraded my open bed car-hauler's electric brakes from single axle to double axle for added safety. My trailer was originally set up with manual adjusters on one axle and they stopped okay when new; but adding the second set adds absolutely unbelievable stopping power and stability. The best part; they went on in about three and a half hours. I replaced the original units on the existing axle, bolted new matching units on the front and wired them in with no problems. Dexter quality is excellent. I used the new brake assemblies and new drum assemblies and they are really nice units. It was only a few bucks more to replace with new than to rebuild the old units.



- 84556UC3-EZ
by:

I had a tandem axle trailer that only had brakes on the rear axle. ordered these hubs and brakes the fit perfect and now I have more braking capability.



- 84556UC3-EZ
by:

The products I ordered were as I expected. Everything arrived quickly and without damage. My only negative and a warning for others, if you are ordering similar parts with the intention of adding brakes to an axle... 1) There are no nuts to attach the brake assembly backing plate with. Even if I was replacing an existing unit, I would want fresh hardware. 2) The bearing/seal assemblies for the hub do not include a new washer/retainer/nut for the axle. Again, anyone replacing these would want fresh hardware.



- 84556UC3-EZ
by:

I was broke down, ordered a new drum in the early afternoon. It was shipped the same day and I was back in business in 48 hours. Good parts, good prices, and good shipping. Etrailer gets all my parts business.



- 84556UC3-EZ
by:

My first order did not go through because I failed to change my billing address for my card and my card was declined. etrailer.com contacted me right away and I reordered my brakes. They showed up quickly and were exactly what I ordered. Communication was great, price was awesome, and our trailer is back in service. I have bought from etrailer before and will do so again. Thanks etrailer.com!



- 84556UC3-EZ
by:

Heavy items were packed nicely in heavy duty box. Everything was received intact and complete. Delivered quick, day UPS guy came was 100 degrees and very humid. Poor guy never made it to door, but set it next to trailer which was fine with me. I used a dolly to get it inside. Parts all fit perfectly, only issue i had was getting very last bolt removed from old brake plate. The nut broke loose from plate, couldn't get nut off. So used angle grinder, problem resolved. Install was smooth and easy.



- 84556UC3-EZ
by:

I installed the new electric brakes and drums on a new off road teardrop type camper we just purchased. I have always had excellent service with Dexter axles and the parts I just installed were as usual, top quality. Thank you!



- 84556UC3-EZ
by:

The hub, drum and brakes were excellent quality and everything was included that was needed to facilitate the perfect install. The guys at e-trailer were extremely helpful and their response to my mistake of ordering the wrong drums was immediate and fast. This is one top shelf company; I will definitely deal with them in the future.



- 84556UC3-EZ
by:

These drum/hub units are great quality and price. Everything is supplied to make installation fast and easy. Ordering was easy with salespeople that know their products. Very happy dealing with etrailer..



- 84556UC3-EZ
by:

What can you say about brake drums? Everything fit like it was supposed to. I found the video on bearing adjustment useful.



- 84556UC3-EZ
by:

Everything as told, one of the products wasn't in stock but found a similar one and fit perfectly. Definitively will purchase from you again



- 84556UC3-EZ
by:

Customer service at etrailer.com was nothing less than fantastic. Hub arrived as described. All of the necessary components were included in the package. Easy to put together and install.



- 84556UC3-EZ
by:

Working great. This was a replacement for a factory hub that failed. I just checked the bearings last week and they look like they did a year ago. Thanks!



- 84556UC3-EZ
by:

Good quality drum and bearing races were already installed so that was a chore i didnt have to deal with. I didnt care for the China brand bearing otherwise it was a good fit for my Dexter EZ lube axles.



- 84556UC3-EZ
by:

The product was delivered super fast for free shipping. Was easy to put on. And is working great. Etrailer has a lot of helpful videos and info that helped me figure out what I needed to order and install. Thanks Etrailer.



- 84556UC3-EZ
by:

etrailer customer service is excellent with fast response and super fast delivery. this dexter drum is biffier than the china ones and better made. excellent service and great dexter product. cant beat this!


29
48
Show More Reviews

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

  • Recommended Hub and Drum Assembly for Homemade Trailer with Rubicon Wheels
    The Dexter Trailer Hub and Drum Assembly # 84556UC3-EZ referenced in your answer is a 5 on 5 inch assembly that is designed for most 3,500 pound axles. The drum dimensions are 10 inch diameter x 2-1/4 inches wide. This will slide over the axle spindle on the trailer you are building. Whether this assembly will be compatible will depend on the capacity of the axle you have and also the spindle dimensions. I have attached an image that shows the different measurements you can take on a spindle...
    view full answer...
    Image 1 for
  • How Tight Should the Castle Nut be When Installing a Trailer Hub or Hub and Drum Assembly
    What our installers do is tighten the castle nut with channel locks then back it off. He does this several times to ensure it is all the way on then backs it off one notch to the next nearest slot for the pin or tang washer. I have linked an installation video below showing this.
    view full answer...
  • Distance From Wheel Mount Surface To End Of EZ-Lube Grease Cap On EZ-Lube Hub And Drum Assy
    I have attached photos of the Trailer Hub, part # 84556UC3-EZ, and of the 2 grease caps that are included. The distance from the hub where the wheel mounts and the top of the hub opening that the cap installs, is 1-5/8 inches. With the EZ-Lube cap installed, that adds an additional 1 inch, so the total is 2-5/8 inches from the wheel mounting surface to the end of the EZ-Lube grease cap. If you decide to use the standard grease cap that is included instead of the EZ-Lube cap, the...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Can I Change a 5 on 4-1/2 Drum With A 5 on 5 Drum For A Trailer With 3,500 lb Axles
    As long as the drums have the same weight capacity as the axles that you are putting them on then there should be no problems there. If you don't already have the 5 on 5 drums that you are asking about, I recommend using the E-Z Lube Hub and Drum Assembly # 84556UC3-EZ. It has the E-Z lube cap on the end of the drum so if you have E-Z-lube axles it makes greasing your axles easier. It also works great with axles that do not have the E-Z lube option. Since you are taking the 5 on 4-1/2...
    view full answer...
  • Outer Diameter of the Hub Bore for Trailer Hub and Drum Assembly 3,500-lb Axles 5 on 5 E-Z Lube
    I went out to the warehouse and pulled trailer hub and drum assembly # 84556UC3-EZ to measure the outer diameter of the hub bore. I used digital calipers to take the measurement and came up with 2.659 inches in diameter.
    view full answer...
  • How to Measure the Bolt Pattern to Make Sure the Correct Drum is Ordered?
    As you are getting a measurement that is slightly off, I am going to suggest one more way to confirm your bolt pattern. Attached is a link to a printable diagram that will confirm which you have. Make sure you print at 100% on 8.5x11" paper. We do have a drum kit that matches the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 # 84556UC3-EZ, but has a 5 on 4 3/4 bolt pattern ( # 845476UC3-EZ ), so I highly suggest using the printable diagram to...
    view full answer...
  • Timbren Axle-Less System Compatible with 5 on 5 Inch Bolt Pattern
    To get the 5 on 5 bolt pattern, you will need the Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased # 84550BX or the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 # 84556UC3-EZ and brake assemblies # AKEBRK-35-SA. These options work with the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Tires - 2,000 lbs # ASR2KHDS03. Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road...
    view full answer...
    Image 1 for
  • Recommended Timbren Axle-Less Suspension with 4 Inch Lift and 5 on 5 Bolt Pattern for Jeep Trailer
    The Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR3500S06 is what you would want to start. If you will be using off-road or wide tires, then you will want # ASR35HDS02 instead. Then you will use hubs that have the # L68149 inner bearing and # L44649 outer bearing. For your 5 on 5 bolt pattern I recommend the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased # 84550UC1-EZ or the etrailer.com # AKIHUB-550-35-EZ-K....
    view full answer...
  • Parts Needed to Complete 2200-lbs Timbren Axle-Less Suspension System for Off Road Trailer
    I have a solution for you, but the Timbren Axle-less suspension system you're looking for does not exist as a complete kit, so you would need to piece it together. However, you can use the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Off-Road Tires - 2.2K # ASR1THDS03 you were looking at in a few different configurations. I don't know that you'll be able to go all the way up to 33"s on this, but you might be able to make it work depending on the overall width...
    view full answer...
  • Jeep Wheel Compatibility with Timbren Axle-Less Trailer Suspension System
    Jeep wheels have the 5 on 5 inch bolt pattern and we do have hubs that fit the Axle-Less Systems and your Jeep wheels. It is recommended to use trailer wheels with trailer hubs because of the zero offset and tire design, but people have been using Jeep wheels especially for off-road trailers for years so we know they can work. We only have a couple compatibles option for that size hub. You will want the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Off-Road...
    view full answer...
  • Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00
    We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents. The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively. The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you...
    view full answer...
  • Replacement 10 Inch 5-on-5 Bolt Pattern Brake Drums for Old Car Trailer
    I did a Google search on the information you found on your brake drums and wasn't able to find anything conclusive regarding a replacement. We offer one 10 x 2-1/4 inch brake drum with a 5 on 5 bolt pattern, part # 84556UC3 for a standard or # 84556UC3-EZ for an EZ-Lube spindle. If your existing hub uses an #L68149 inner and an # L44649 outer wheel bearing, either of these hubs would be compatible. The hubs include the bearings, races, seal, grease cap, wheel bolts and lug nuts. If...
    view full answer...
  • Hub and Drum for a Dexter 3,500 Lb Axle with 5 on 5 Inch Bolt Pattern
    The correct hub/drum for your Dexter 3,500 lb axle is more than likely going to be the Dexter Trailer Hub and Drum Assembly part # 84556UC3 or part # 84556UC3-EZ (E-Z Lube). The L68149/L44649 bearings and 10-19 grease seal that this kit uses is fairly standard for this axle. However, there are certain instances in which this is not the case. In order to be sure you can either give me the serial number off of the white tag on the axle or read me the bearing and seal numbers off the parts...
    view full answer...
  • Determining Replacement Hubs for EZ Lube Spindles
    EZ Lube spindles are compatible with all idler hub and brake hub and drum assemblies, and the only difference is the seal and grease cap. To determine the correct replacement hub for your trailer, you will need to pull off your existing hubs to determine the bearing numbers. The difference between the EZ lube hub and drums and the non EZ lube hub and drums is the grease cap and seal. The EZ lube ones like the # 84546UC3-EZ have a removable rubber seal on the cap that allows you to access...
    view full answer...
  • Is Timbren Axle-Less Suspension TASR35HDS04 Compatible With 3500 Hub and Drum Assemblies?
    I have another option for you, but the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 3,500 lbs # TASR35HDS04 you were looking at actually uses 5200lb hub and drum assemblies and is not available with the 5 on 5" bolt pattern you mentioned. Instead you will need the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05. This option takes standard 3500lb hub and drum assemblies, so for one with the 5 on 5" bolt...
    view full answer...
  • Can Dexter Trailer Axle w/ Electric Brakes 7359765-EB Be Ordered With The 5 on 5" Bolt Pattern?
    I would be happy to piece together an axle with the components you need, but unfortunately the Dexter Trailer Axle w/ Electric Brakes # 7359765-EB you were looking at cannot be ordered with hubs that have the 5 on 5" bolt pattern you are needing. Instead you will need to go with the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs # 7359765 which has the 95" hub face measurement and 80" spring center measurement you mentioned that you need, Dexter Electric Trailer...
    view full answer...
  • Adding Trailer Brakes to a 3.5K Dexter EZ Lube Axle and Brake Control/7-Way on 2016 Subaru Outback
    The brakes you have chosen, # 23-468-469, are compatible with the hub and drum assembly # 84556UC3-EZ and those assemblies will fit the Dexter 3.5K EZ Lube axle. The thing about this hub and drum is the bolt pattern. It has a 5 on 5 bolt pattern which is not very common anymore. I would verify that is indeed the pattern you need by using our help article on measuring for bolt pattern which I have linked for you. If you have a different bolt pattern let me know and I can make some recommendations. Wiring...
    view full answer...
  • Which Axle-Less Trailer Suspension For Custom Kayak Trailer With 15" wheels and 33x12.5 Tires
    For your custom kayak trailer I recommend the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS02 which is a straight spindle 2000lb rated axle-less system for wide tires. The Timbren # ASR2KHDS02 will use the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # 84545UC1-EZ which will fit a 15" wheel with 5 on 4 1/2 bolt pattern, or the # AKIHUB-550-35-K if the wheels you plan on using are a 5 on 5 bolt pattern. Either option will work with the 33x12.5 tire you plan...
    view full answer...
  • Recommended 7000 lb Capacity Trailer System with 5 on 5 Inch Bolt Pattern
    I am happy to take a look at your axle layout drawing. From what I'm gathering it seems like you have a desire to use an 89 inch 3500 lb axle with 5-on-5 inch bolt pattern. For your axle, you will want the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs # T3584F-EZ-8974. For your hub/drums you will want the Dexter Trailer Hub and Drum Assembly - 3,500-lb Axles - 5 on 5 - E-Z Lube # 84556UC3-EZ or the idler hubs # 84550UC1-EZ. For brake assemblies you will...
    view full answer...
    Image 1 for
  • Recommended Trailer Brakes With Parking Brake For 10 Inch 5-On-5 Bolt Pattern Drums
    For your custom trailer build, I recommend using the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 2,000 lbs # ASR2KHDS04 or the # ASR2KHDS03 for wide tires. Either of these options will work perfectly with the Dexter Electric Trailer Brake Assembly with Parking Brake - 10" - Left Hand - 3,500 lbs # K23-086-00 and Right Hand # K23-087-00. The parking brake capability will also require the Titan Breakaway and Parking Kit for Drum Brakes # T2385200. For...
    view full answer...
  • Dexter 8-249 Trailer Hub And Drum Replacement
    We do have the correct replacement hub and drum for your Dexter 8-249, and there are a couple of options. The only thing that separates them is if you have an E-Z Lube axle (your spindle will have a grease zerk) and what your hub's bolt pattern is. You will want to match your bolt pattern so you can match your current wheels, and you will have either a 5 on 5" bolt pattern or a 5 on 5-1/2" bolt pattern. If you are unsure, I have added a link below to a printable bolt pattern template,...
    view full answer...
  • Hub Assembly For Timbren Axle-Less Suspension System ASR35HDS02
    I do have an option for you but the bearings that fit the spindle of the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 are part # 25580 for inner and part # 15123 for outer. There is not going to be a 5 on 5 bolt pattern hub with those bearings. You would need the 6 on 5-1/2 Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ to use this particular system. If you want to use your existing wheels with the 5 on 5 bolt pattern you can use Dexter Trailer Hub and...
    view full answer...
  • 3,500 Hub and Drum Assembly Recommendation with 5 on 5 inch Bolt Pattern
    For a similar hub as the Dexter hub and drum part # 8-247-50UC3-EZ with a 5 on 5 inch bolt pattern you would want the Trailer Hub and Drum Assembly part # 84556UC3-EZ. For a pair of these you would just need to order a quantity of 2.
    view full answer...
  • Parts Needed to Add Brakes to a Trailer Axle
    The Brake Mounting Flange for 2-3/8" Round Axles that you would need is # 4-35. As far as brakes go for your set up, I recommend # 23-26-27. There are a few different bolt patterns that will determine what drums you get and you will want to match them to your wheels. We have the following that will match up with the brakes and mounting plates above: - 5 on 4 1/2" bolt pattern - # AKHD-545-35-K - 5 on 4-3/4" bolt pattern - # AKHD-5475-35-K - 5 on 5" bolt pattern - # 84556UC3-EZ -...
    view full answer...
  • Correct Brakes for Big Tex Tandem Axle Trailer with 8-249 Hub
    It looks like you have a Dexter 3,500 Lb Axle so in order to replace the braking assemblies you can use the Electric Trailer Brake Kit part # AKEBRK-35-SA. If you want to replace the hubs as well then you can use the Dexter Trailer Hub and Drum Assembly part # 84556UC3-EZ.
    view full answer...

Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Patrick B
Installed by:
Patrick B
Employee Jeff D
Installed by:
Jeff D
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.