Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (163 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Outer bearing #14125A was damaged. Notified Davine at etrailer and emailed her a picture of the damaged bearing. Currently awaiting a response. Everything else in the package was ok.
Thanks so much etrailer for making me feel so much better/safer about carrying heavier loads in my trailer. Katrina also went the extra mile when it came to customer service and patience with my order. I had 15" six lug hub and drum assembly which held all I could load on them, like I said I just did not feel safe so I went with this hub and drum assembly which came with all necessary items for the install, and it allowed me to put 16" tires with a heavier weight rating. Very pleased.
Parts are always great but need to improve packaging when shipping. Twice I got drum kits and the boxes were either open or had holes and parts fell out. I got a third order in the same condition but fortunately all the parts were still these. One seal was damaged.
I love ordering from etrailer. They have a great team. The brake assemblies and hubs arrived on time and the installation was easy. The only negative was one of the drum assemblies arrived with a crushed seal and the outer bearing cage was bent up. I know etrailer would have sent replacement parts but do to time constraints I made a trip to our local trailer parts store. $20 later and a little time I was back to work. There was no damage to the box. The bag with the bearings and seal in it got to where it could get damaged by the weight of the drum.
Josh at Etrailer was very helpful got my grand design 376 ready for our next trip.Thank
Would to see this package available with optional upgrades for name brand bearings and grease seals (eg. Timken, national, skf).
Perfect fit and excellent quality. That is why I use etrailer.
I thought there might be an issue with the parts because the old drum was an Axiletech. Measured everything and turns out it all fit PERFECT! Did have to use the old nut and cotter key due to no slot in the spindle. Other than that it's all good. Thanks for the proper parts for my trailer and good shipping.
ordering what i needed was a breeze with your wonderful staff
need part asap for equipment trailer for customer
and you made it happen thanks again from myself an my customer
Hub was better than i hoped for the races were already installed just grease the bearings and put it together and they came sooner than expected.I have used etrailer in the past.couldnt be happier
The confidence with part selection from the website put me at ease and made it easier for me to order these break parts.I am very pleased with the install videos and products.
Delivered quick and timely. I was surprised to see how much better made this drum assembly was compared to the equivalent manufactured and sold by Lippert. Will be replacing the other three drums on our trailer with this Dexter drum assembly.
Good quality and good service
OEM parts that are affordable
These guy's at etrailer are hard to beat! Customer care is over the top. That's why Allison Creek does business with etrailer.
I ordered and it came in 2 business dsys
Always a pleasure dealing with the etrail team!!!
Great product and exact replacement for our 42ft Keystone Montana High Country 375FL.
Fast shipping and correct part is extremely important as we are full time RVers and with limited time.
I've ordered several items over the years and always received great service.
worthless customer service! Lied to me, no overnight. No follow up no communication. Very bad. They talk a good game until you need them then etrailer is MIA!
The US made Dexter axle was worth the wait. The shipping through UPS was not the best experience for getting heavy items to Alaska. etrailer customer service was great at resolving the issues with UPS.
I purchased 4 of these to convert a trailer to 8 lug rims. The kits arrived but one bearing was damaged prior to arrival. Carol shipped a new one no questions asked. Great customer service. Thank you.
I ordered this as spare hub assembly for my 5th Wheel RV. We are leaving next month on a 5000+ mile, 3 month trip. I figure if I have a bearing go bad I can swap out the whole hub and be back on the road in no time. The hub is the same Dexter hub that I have on my rig now.
Shipping was fast and free, Helen was great, helping me find the part numbers of some of the other accessories that I needed to have spares of. Speaking of shipping I had checked other places for the hub and while the price was similar the freight charges were half the price of the hub. I will definitely be giving trailer my business going forward.
Andrew - 02/16/2020Very valued supplier with quality parts and excellent customer service!
This is exactly what I need for an on-the-road repair! I ordered a second because I had a wheel-lug issue on I-95, and this kit got me rolling again! Thanks for offering a very complete setup at a great price. Finally, the free shipping is EXCELLENT! With some vendors "free shipping" means "you will receive it sometime next year." Not etrailer.com! Thanks!
Al - 03/31/2015Excellent service. Had a small problem and it was handled quickly and professionally
Shipped a few hours after ordering. It’s what I needed and got the job done!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.