Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and nuts included.
Features:
Specs:
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (118 Customer Reviews)
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and nuts included.The dexter hub and drums came complete with all the required new installation components that made installation simple and easy. My brake magnets had grooved the inside on some of the original drums, and I noted a broken brake wire at the axle entry so I wound up replacing the brake assembly, wiring, and hub and drums on all four wheels to restore the RV to full brake efficiency and safe function. In the future I'll add visual inspection of the brake wiring to my list of annual and pretrip inspections.
I have purchased from eTrailer numerous times and have always received excellent service and customer support. I had a technical question about available Dexter hub/drum kits and got a reply very quickly despite it being submitted on a weekend.
I was able order what I needed and delivery was very prompt.
These are genuine Dexter components and exactly what I needed to get my tired axles back in perfect condition The drums are an exact match and are high quality, as are all the parts that come with this kit.
I don’t experience such good customer relations very often these days, so eTrailer really shines in my opinion.
Excellent service from etrailer, they had my parts to me in 1 day from the time of placing the order. These hubs seem to be well made and fit nicely onto the Timbren 5200 lb axel assembly with the 12" self adjusting brake kit. I have not ran these on the road as of yet but will give another review at that time.
I got these to replace my hosed up 4-9.44 hubs (8-155). One was a 3-9.44 hub (one hole was bad), the other three hubs had two different sized bolts in them. This was for a 1988 HMD 20 foot stock trailer with #5200 axles. The outer bearing for the 4-9.44 hub was an LM67048 so I opted to stick with that bearing to fit the spindle. Fit perfect. Very happy with my purchase.
I bought the kit with bearings, All fit perfectly!! Installed the self adjusting Electric Brake Assemblies as well, All parts fit together perfectly. Thanks George.
Personally I was completely thrilled with everything about my experience here & with products. I’ve been struggling to get the right brake drums/bearings/etc for this dang boat trailer from the mashed/blow up drum/pieces I had to work with and etrailer.com …. made it so easy, I got every single part I needed to redo both forward wheels/bearings/drums/etc on the trailer from this one kit/one order that was exactly what I needed.
They fit like they are supposed to. In my opinion it is a lot easier doing this service as an assembly than buying individual parts. Faster and easier.
We built a custom trailer for elk hunting. We took it up the jeep trails loaded down and it did amazing. 34” off-road tires.
We are a Commercial boat dealership. All purchases with Etrailer are great! Fast and efficient and great customer service
Fit perfectly except the kit included the wrong axle seals for my application. Had to source seals to install.
Awesome product, heavy duty equipment! Will be testing brakes soon while pulling my camper soon.
Thanks.
This was a great acquisition and worked perfectly. It took very little effort to make things as good as new!
Price and timeliness very reasonable
Quick delivery and exactly what I order ed
Great product. Arrived quickly and everything was as it should be. Very satisfied with this purchase.
Fit perfectly and easy to install
Just like to say that those self-adjusting brakes that I bought a year ago working fine way better that my old breaks that I had to adjust myself you got yourself a satisfied customer etrailer
The product itself I would give five stars!! but the shipping I will give one star I ordered it on 5/24. They said it was in stock and processed in Salt Lake City warehouse but it took nine days to get to California…. this is the first time that I’ve ordered through etrailer and not been happy with the service and shipping!!
Product, service & technical information is great. Mike provided confirmation of all the correct parts for my trailer hub assembly.The price was so reasonable that I carry the assembly in the trailer and ready to mount so, no rebuilds on the side of the interstate. Thanks Mike!.
Not happy that it came with made in China bearings.
Thank You for a follow-up !! The update was done on a home made trailer that had trailer house axels and wedge type rims! The difference was astounding !! With new tires and the wheels and rims made it into an entirely different trailer!!
Thanks Again for the follow up, I have to say that hasn’t happened to me before! One usually one has the “tail-light” Warranty if you catch what I’m saying!!! Thanks Again
Parts were very reasonably priced and shipping was same day.
Thanks Marti for your support!
Have always used dexter products for my trailers and etrailer has always had what I needed in stock. Great company to order from never a problem with any parts I have ordered.
It was delivered quick, fit perfectly. Tomorrow we are taking our trailer back to work.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob C.
8/4/2015
I actually bought these parts as spares which I carry in my 26ft loaded cartrailer. We had a bearing failure on I71 heading to Akron, OH on a Sundaynight last summer. I had all the parts to change the bearings and seal but,it wasnt much fun or safe on the side of a busy interstate. We were on ourway within an hour. Right after that I ordered the assembly which will cut our change out time to about 20 mins. Given the minimal cost, any trailerowner should carry a spare assembly.