This hub-and-drum assembly fits 7,000-lb Nev-R-Lube axles with BTR spindles. Nev-R-Lube design eliminates bearing maintenance. Compatible with electric and hydraulic brakes. 50mm cartridge bearing, snap rings, grease cap, and lug nuts included.
Features:
Specs:
This hub-and-drum assembly uses Nev-R-Lube cartridge bearings that are designed to move slightly in accordance with your axle, minimizing the wear on your bearings. With this long-lasting hub-and-drum design, you don't need to grease bearings or replace seals. Simply install your hub-and-drum assembly and you're finished.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a trailer hub and drum assembly. Now, this assembly is designed to be used on Dexter 50 millimeter never lube axles. This part number includes one assembly so, it comes with everything you see laid out here on the table.It has the snap rings, which are already pre installed. Bearings already pre installed. Comes with the lug nuts as well as the included cap, which goes over this area here and you just press fit that into position. The studs on the unit have a diameter of a half inch.
Capacity is 3500 pounds per assembly. So, when paired with another one you would have the capacity of 7,000 pounds, so it is designed for 7,000 pound axles.And, it works with both electric and hydraulic brakes. Drum size on this unit is 12 inch by two inch. Again, stud size is half inch. Has really nice durable construction to it with protective finishing, so you don't have to worry about rust or corrosion.Bolt pattern is eight on six and half inches and again, it comes with everything laid out here on the table.
That's gonna do it for today's look at the trailer hub and drum assembly. Again, this is designed to be used on Dexter 50 millimeter never lube axles with a capacity of 7,000 pounds.
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
This hub-and-drum assembly fits 7,000-lb Nev-R-Lube axles with BTR spindles. Nev-R-Lube design eliminates bearing maintenance. Compatible with electric and hydraulic brakes. 50mm cartridge bearing, snap rings, grease cap, and lug nuts included.etrailer came through as always, part wasn’t in stock but called customer service & communication was great. Part arrived as soon as possible & as described. Thank you!
Exactly what we ordered. Was a pleasure doing business with etrailer got my order out same day even though we were a little late on getting order in. Made my customer very happy to get back on the road. Thank you
Great quality. E-trailers customer is top of the line.
Do you have a question about this Trailer Hubs and Drum?
Condition: Missing Parts
Notes: Item is missing the cap and nuts. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.