Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (181 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.I was in need of a set of hubs to go on a small enclosed trailer, time was of the essence and from the time I purchased the hubs they were delivered to my door step not even two full days later. For FREE. Which if you order parts for anything you know that’s insane !!!!!!! The hubs seem like great quality, they went on with zero issue. There was even included parts to use either a castle nut or a tab style washer, plus lug nuts ! And I have faith they’ll make the 3700 mile trip I have coming up. 10/10 would recommend to anyone.
I wasn't replacing hubs but rather installing them on new axles (Timbren Axle-less system also purchased here). It was convenient to get the hubs here as I was also purchasing the Timbren system so I knew the setup would work together.
Being a novice at working on trailers, these hubs installed without a problem using the instructions provided. I had read several articles on problems with new hubs and the key comments I heard echoed was to be generous with greasing the bearings. It's been a year and I only have about 500 miles on the hubs but everything still sounds good.
I use the trailer for pulling my motorcycle so the load has been roughly 1200 pounds. The tires are ST145-R12 trailer tires.
Kit came with everything. Perfect fit. No issues or problems noted during the past year. Last November towed my 3500 lb boat/trailer package from Savannah GA to Port Charlotte FL and return at speeds up to 65 mph in addition to all the local miles racked up during the year -- all with no issues or problems.
Jack S.
9/16/2021
So far so good ! Ive towed my boat wtrailer from Savannah to Port Charlotte Florida and return and many local trips with no incident.
Put new brakes,drums, bearings and seals and hubs on boat trailer found all parts here and received really fast always order parts for trailers here and always will
All products arrived correct and complete on the date promised. Will definitely order from here in the future.
Delivered what I ordered as promised. Very easy to install. I did watch the tutorial video before starting was easy to comprehend.
Quick shipping. The pieces appear to be of good quality. The welds looked solid. I haven’t put it on yet but it appears to be a straight forward installation. It’s going on a single axle trailer.
These have held up for 30k miles so far and still perform like new. Serviced in 10k increments. Overlanding trailer weighs 1360 lbs empty 2k fully loaded.
Unlike other 3500 lb idler hub, this one does not come pre assembled. Glad I had bought the grease as well! Easy to install thanks to excellent videos.
Thanks to ETrailer i got my hubs i needed for my trailer and everything went smooth. Very satisfied with the results of service and product. I recommend ETrailer to anyone and everyone needing good service and parts.
etrailer was quick to respond to questions with relevant and knowledgeable information. I would not hesitate to order from here again.
Purchased to replace a similar hub that would not hold the grease cap. This is working as expected after 4000 miles of use. Pleased with the results!
After a slight bit of technical confusing on my part the customer service staff set me straight and I was able to get the correct hubs for my application.
Overall, I am quite pleased with my experience with buying from etrailer. The website is very detailed and helpful. The response to my questions took only a few minutes and was very helpful in placing my order. The parts arrived in only 3 days. Minor downsides was that one cotter pin was missing from an axle, one hubcap was bent rather oval and will take some reshaping to make it work, and one grease seal was slightly bent. Additionally, the axles I ordered were described as having 4 inch stubs, but only have 3 1/2 inch stubs, so I will need to weld on and extension to make them fit my needs. Overall though, I am pleased with the service. Nothing goes really perfectly these days with online shopping. I will be ordering more items from etrailer sometime today, and will hope that my minor issues will cause them to improve their service a little more.
Jenny N.
11/17/2022
Thank you for letting us know. I will share this feedback with our shipping department and Customer Service will be in touch.
I couldn’t find parts for my customers boat trailer . Nobody had a complete trailer axle . So I finally found etrailer they answered the phone I had all my measurements they took the time to search out what I was asking for . Awsome sales lady she knew what I wanted and found all my parts so I can replace the spindle on the axle
Nice to talk to a person instead of a answering machine
Thanks for your help
I had a broken hub on a 21' pontoon trailer, so I went ahead and replaced both hubs on a #84 spindle with these. They appear to be good quality but I have yet to see how they perform on the road. They assembled and were mounted easily. The only issue I had was one of the grease seals was slightly bent and I had to bend it back into shape, otherwise no problem. One other thing, I don't believe you will be able to beat the speed of shipping from etrailer, and that's a very big deal with me. I will definitely use these folks again.
Casey W.
7/4/2015
I just recieved mine, and the grease seals were also bent, I also had a lug stud that was buggered up pretty good on the end. I had to get the trailer back into service so itll be another day of knocking out the stud and putting in a new one. In general, looks to be good quality but I wish theyd pack the items better to avoid this type of problem.
Rachael H.
7/6/2015
Easy to install and perfect fit!
Everything was as advertised. Quality is very good. They look great behind my new wheels. Thanks etrailer!
Doug
3/13/2023
These hubs are still working great. No issues. Would definitely buy again. I only go to etrailer.com for trailer parts.
Fast Delivery! Great customer service!
Customer Service helped me determine the best hub for my trailer - very knowledgeable folks at etrailer !!!
The parts were received VERY quickly - etrailer always does great with order fulfillment - and were of high quality. The hubs, bearings and hardware were all "correct" and installed easily on my Load-Rite boat trailer. One EZ-LUBE dust cap was received with minor damage (bent). I straightened it to allow immediate installation, and etrailer quickly responded to my request for a replacement - it arrived within days and didn't affect my overall project. But please note that a lot of reviews for hubs will mention damaged components (grease seals being most common) and so I'd recommend waiting for the parts to arrive BEFORE starting a hub rebuild... just in case you get a damaged part, too. And if you do - know that etrailer will stand behind their product and get you a replacement very quickly.
Also, if you have EZ-LUBE hubs like me - remember that you need to spin the hub while pumping in the new grease. Otherwise it just blocks up and will not fill the hub and bearing properly.
sirs/mams
Good afternoon from Seabeck Washington!
Your customer service is awesome, this was all due in to Darren and I will be back!
I have attached some pics of my application. the spindle was used for an old military trailer, the steering axel is different, as it is not a typical steer axle and is able to rotate 360 degrees. it pivots on a axel spindle and it was sheared off at the base just above the seal area.
so i had to cut it out and do a re-install with your replacement and it was a perfect match.
Thank you guys again!
The hub assembly came a little later then I would have liked.BUT it was not e-trailers fault. It was covid-19's and China's fault. They are working great, went right on the spindles, no problem. Really have found a great place to buy parts. Keep up the good work.
Product was a perfect replacement for the old sets that had failed. Packaging was poor, and wheel studs were dinged up because of it.
Will
9/2/2016
After a year and over 1,000 miles I am still happy with these hubs.
Just bought these as a spare for my trailer. Also purchased a 3500 lb axle and couldn't be happier. Really solid and was easy to install.
Shane G.
1/4/2018
They have been awesome! No issues at all. Thx for the follow up.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Pat A.
3/15/2018
The hubs are still sound after a year of occasional use. The configuration has worked well for me and still pleased with the results of the products Im using.