bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter
  3. 5 on 4-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

Item # 84546UC3-EZ
Our Price: $169.70
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Great Prices for the best trailer hubs and drums from Dexter. Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased part number 84546UC3-EZ can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (672)
  • Q & A (0)
  • Photos

Dexter Trailer Hubs and Drums - 84546UC3-EZ

  • 5 on 4-1/2 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Pre-Greased
  • Standard
  • 1/2 Inch Stud
  • L44649
  • L68149
  • Dexter

This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Pre-greased hub is easy to install - no need to pack bearings
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 3,500-lb E-Z Lube trailer axles with #84 spindles
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Works with 10" brake assembly
  • Bolt pattern: 5 on 4-1/2"
  • Grease cap flange diameter: 1.986"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,750 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 10-19
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-247-94 Dexter Pre Greased 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2

Replaces 84546UC3-EZ





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased - 84546UC3-EZ

Average Customer Rating:  4.8 out of 5 stars   (672 Customer Reviews)

This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

by:

The brake parts were all correct for my application and installation was straightforward with minimal tools needed. I did take the extra step of soldering the wire connections because that is the best way to do it IMO.

Stephen at etrailer was very helpful. He made sure I had all the right parts for my application. and they were on their way very quickly.

I will say that I tried to use my local dealer first because I like to support local businesses, but unfortunately, they were having trouble finding the right parts for my trailer. When we did find them, they were 50% more expensive for the exact same parts that etrailer supplied. I would also have had to drive 80 miles round trip to get them.

The reason for the 4-star rating is because of shipping/packing. The parts were heavy in large boxes with no packing material to hold them in place. Two of the hub sets were out of their boxes and there was a crushed grease cap. So, better packing to keep things in place in the boxes or use a smaller box would be nice.

I attached a few pics of before and after also tmy very worn hubs. You can see that eh armature is worn down to the studs and the magnets are starting to show the coils. It was time. Also a short video or timelapse that I titled, Trailer Brakes in 18 seconds

Etrailer Expert

Katrina D.

11/11/2023

I am sorry that the hubs arrived in this condition. Let me get you over to our customer service department for them to see what we can do for you.



by:

I was a bit intimidated by the thought of taking apart my hubs and had no idea where to start. But the etrailer live chat gave me a complete parts list based on my trailer GVWR, I watched a couple of videos on the website, and then spent about 1.5 hours on the job (honestly, at least 45 mins was me figuring out where I wanted to run the wire and strapping it in, then stopping to drink a beer and admire my work, with the actual hub work taking less than 20 mins apiece).

I was able to install the new whip, box, and run power to the hubs in about an hour afterwards. I then got in the truck, toggled to my trailer braking control, set my sensitivity, and went for a test drive. Works flawlessly!



by:

Bought new Dexter brakes and drums to replace the original brakes on my 1995 Haulmark car trailer. The original drums and magnets were badly worn, and I wanted to replace them before going to the car cruise in Ocean City. I received an email from etrailer.com within hours of placing the order, stating that the order has shipped! The absolute best customer service I ever had. The parts arrived within days, and the packaging was superb. Thank you etrailer!

Paul K.

9/24/2018

The Dexter parts are working great so far! Although I only used the trailer twice for about 450 miles total. Ive always had good service from etrailer. Thank you for the follow up, I appreciate it.



by:

I destroyed a hub/drum when i lost a bearing. I was able to clean up the spindle just enough for it to be salvageable and I put this new hub assembly on. So far, so good!



by:

Hi Alex,

This is NOT my first order
with you guys, there has been a few.
This order arrived on time, in perfect condition, and the replacement went FANTASTIC…….THANK YOU!!!
Every order with etrailer has been absolutely Perfect!
Keep up the Great work and customer service. E-trailer is Great!!!



by:

Got this with a 10 inch trailer brake. Everything was as expected. I had to buy a couple nylock nuts from Menards. They are 7/16 by 40 pitch. Which is a fine thread.

Jonathan

8/23/2016

The brakes work great! Im really happy that I took the time to install them.



by:

Customer service was extremely helpful! Order arrived earlier than expected. All the new parts fit exact. Bolted on and was done in 10 minutes! Have always been pleased with every purchase.



by:

Easy installation, quality parts.
During
shipment the box was busted open and one of the 4 hub/drums came out. So the box arrived taped up and 1 hub short to complete the job.
I called the contact number, great customer service. They are currently rushing me the missing hub. Thanks!



by:

The brakes from etrailer were of excellent quality. They installed easily, and no adjustments were needed for the installation. After bleading the system, the brakes worked fine. I will definitely recommend etrailer to my friends and relatives needing trailer parts and accessories.



by:

Customer service was excellent, fast shipping and perfect replacement parts.



by:

Worked with Helen at etrailer to make sure the correct parts were ordered and supplied. Helen was a pleasure to work with and the hubs and bearings fit perfectly. A year later everything is still working great.
Thank you Helen and etrailer.



by:

Installed perfectly and performed as expected.
This
was a switch out to a new trailer without brakes to adding Hubs & Drums with brakes. Everything worked out as planned and it was a quick change out.
Thanks for your help etrailer

Peter

7/4/2023

Everything is still working as planned. The change out for the installation of trailer brakes is as planned. I specified these parts for the brakes but also so I could add a hand brake lever when the trailer is parked. I didnt want the possibility of it rolling. Additionally, this allowed me to drill a hole through the hand brake lever to lock it against theft. The entire parts and planning worked.



by:

Parts r good quality fit good would order from trailer again



by:

Who doesn’t love a 20 minute hub change with bearings and grease?? I sure do and replaced all my hub bearing assemblies with these. It took about an hour and I was back on the road. I drove our TT about 150 miles over the weekend and it did great! Thanks to the staff at ETrailer for going above and beyond with the sale as well!



by:

Reassembly of parts went perfectly, I made the right choice with etrailer !!



by:

installed brakes on my 97 Rogue boat trailer. E-Trailer had everything I needed for the job. Trailer already had the 4-hole mounting plate for the backing plate. It was all bolt on, brakes work great. I have bought quite a few items from them over the past few years, including an axle assy with brakes for another boat trailer, 2 brake controllers and also a trailer hitch for our older Lexus suv. I am very satisfied with there service and quality of there merchandise.



by:

Everything worked out well and are good replacements for existing drums. My only issue was the nuts and washers were too large for my spindle. Luckily my existing nut and washer were in good condition and could be reused.



by:

We have been going camping out West snd Southwest for five years now. Pulling 2003 Jayco 12 Sd popup behind 2006 Chevrolet Express 2500. A lot of mountains. Big Mountains. I noticed that the hydraulic brakes on the camper didn't work properly. I have tried to adjust them multiple times but it didn't help. I decided to replace them with electric brakes . It looked like etrailer had exactly what I needed. I ordered the electric brakes assembly first and then hub and drum assembly. Had to take some measures for the brake plate mounting and also get part numbers of the old bearings in the hub. All parts arrived two days after order was placed. Amazing. All the parts were there. . I am not the greatest mechanic but I was able to install them fairly quickly. Installation videos on etrailer website and YouTube were very helpful. We just went on our first camping trip this year. Only two hours drive. It seems that everything works fine I can feel that new brakes actually work. Thanks to Nicole at etrailer for helping me with this order.



by:

The Dexter brakes and hubs are great - a bit pricey but far and above the no-name brands. There was one problem with the order (well 2 actually), they only shipped one brake in the package so there go my plans for installing the new hubs and brakes this weekend. This was an order for left-and-right brakes and two hubs. Mistakes happen so I'm not real upset about it. I'll update this review when I see how customer service handles this.

The second problem is the packaging. Nothing was damaged, which surprises me, but the two Drums and one brake were in their own boxes inside a bigger (huge) box with no peanuts or anything to keep them from flopping around. I lifted the box up on end so I could pick it up to carry it back to my work shed. When I did, it almost rolled out of my hands because the contents shifted so violently. When I got back there and opened the big box, the three smaller boxes were piled atop each other at one end.

FORTUNATLEY, they made it through the carrier's system, of which I am very familiar since I worked there for years. I was shocked they did. Better care when packing into larger boxes would go a long way.

Five stars for the products. Three (average) for the care in shipping the order.



by:

I purchased a used cargo trailer. We used it in October to go to Colorado on a hunt. We had a horrible time with the brakes failing. I tore it down this Spring and found there were no brakes on the front axle. I started checking around locally and could not find the parts I needed. I found etrailer online and took a chance and ordered(something Idon’t do shop online)the parts I was sure I needed. The parts arrived Tuesday and I installed them today. Everything was just as advertised and the fit was exact. Now I just need to get two new tires and wheels and the trailer will be ready for our trip to Colorado this year. Thanks E-Trailer.
John



by:

Really detailed helpful videos made installation a snap. I put brakes on a trailer that didn’t have them.

A word of caution. Unlike the brake kit, the drum kit only does one wheel. So if you order a brake kit and a drum kit you don’t have enough to do two wheels.



by:

As always, great doing business with E trailer. Great products



by:

Great Price on a new brake drum for my Casita. Included everything - bearings, seals, dust cap, retainer, axle nut and lug nuts. Did not include the washer, but that's no big deal (I have a few extra!). Arrived much faster than expected, too. Got my Casita back on the road after a bearing failure that scored the inside of the hub. Great price and good service from etrailer! I must also mention that etrailer has so much good INFORMATION and tutorials as well. There might be other online sites that have it for a penny cheaper, but they don't have the information you need to get the job done right. Thanks again etrailer!



by:

Melissa provided excellent service and follow-up on delivery



by:

Got it on today. No problems


25
672
Show More Reviews

See what our Experts say about this Dexter Trailer Hubs and Drums

  • Parts Needed to Add Self-Adjusting Electric Brakes And Hub & Drum on 3,500 lb Axle
    Thanks so much for all that specific info and we do have exactly what you need for the hub and drum and self-adjusting electric brakes for your trailer with a 3,500 lb axle. The exact parts you need are the following: - Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84546UC3-EZ - Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 - Bright Way Push-to-Test Trailer Breakaway Kit # 3802308 You'll need two hubs, but the electric brakes are a complete set with both the...
    view full answer...
  • Replacement Dexter Hub for 2007 Casita Freedom Deluxe Camper Hub K08-247-94
    You can select a suitable replacement hub for your Casita Freedom Deluxe camper by matching up the existing hub's bolt pattern, axle capacity and bearing set. If your original hub has a 5-on-4-1/2-inch bolt pattern, is fitted to a 3500-lb axle and uses inner bearing 68149 and outer bearing 44649 then the 10 x 2-1/4-inch Dexter part # 84546UC3-EZ is a correct replacement. My contact at Dexter confirmed hub K08-247-94 has these attributes.
    view full answer...
  • Replacement Non E-Z Lube Hub & Drum For 3,500 lb Dexter Axle 8327812
    I wouldn't want to say that all of the 3,500 lb axles use the same set of bearings and seals, but in general, most do. Still, it's important to verify the bearings and seals you have, but since you mentioned you have the 3,500 lb Dexter Trailer Axle Beam # 8327812-I, I can tell you exactly what hub and drum you need. And you can indeed use a non E-Z lube hub and drum if you'd like, though I'll go ahead and list out both options for you just to be thorough: - E-Z Lube Hub & Drum: Dexter...
    view full answer...
  • Are The Dexter Nev-R-Adjust Brakes Available With The Brake Drums as a Package?
    We do not currently offer the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 you found with the brake drums as a package. This is mainly due to the large selection of brake drums which will work with these brakes. Here is just of few of the standard hub/drum kits listed below by the bolt pattern for the wheel. These hubs are sold individually per side so you will need 2 to go along with the brake kit above. 5 on 4-1/2" # 84546UC3-EZ 5 on 4-3/4" # 845476UC3 5 on 5" # 84556UC3-EZ 5...
    view full answer...
  • Is Additional Grease Needed to be Pumped into Dexter Trailer Hub that is Pre-Greased
    You do not need to add additional grease to a Dexter trailer axle hub that came pre-greased. It has the correct amount in it and is ready to be used. Adding additional grease will most likely blow out the grease seal.
    view full answer...
  • How to Tell if a Dexter Axle Hub and Drum Kit Fit a 1997 Elite Trailer
    As long as the hubs on your 1997 Elite Trailer use the bearings and grease seal listed below then yes, the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles # 84546UC3-EZ will work: - Inner Bearing # L68149 - Outer Bearing # L44649 - Grease Seal 10-19 (1.719" ID) About 2000 is when trailers started to sort of us standardized parts which is why it's important to check your bearings and grease seal for compatibility.
    view full answer...
  • Will Dexter Electric Brakes w/ Parking Brake Work w/ Timbren Axleless ASR2KHDS02 Brake Flange
    The Dexter Electric Trailer Brake Kit w/ Parking Brakes - 7" - Left/Right Hand Assemblies - 2.2K # K23-103-104-00 fit a 4-bolt pattern so yes, they will technically fit the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Wide Tires - 2,000 lbs # ASR2KHDS02. But those brakes are too small for the hub that fits the Timbren # ASR2KHDS02, which is the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ. This is a...
    view full answer...
  • Replacement Grease Cap With Rubber Plug For 3,500LB Trailer Axle Hub
    Yes, we do offer the Lubed Dust Cap & Rubber Plug # DC200L-DCRP which is the size used on the Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ you are looking at. It will fit a hub bore of 1.98", if your hub bore for the cap is a different size please let me know so I can find you the correct cap.
    view full answer...
  • Is There a 2,000 lb Timbren Axle-Less Suspension System With Rise
    There is an option for one of these systems with a rise, but there isn't an axle riser kit for the Timbren Axle-Less Trailer Suspension System - 2,000 lbs # ASR2000S01. Reason for that is since these aren't a thru-axle and mount right to the frame, there isn't a way to lift that system. What you can use though, is a 2,000 lb kit that has a built-in 4 inch rise: - Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - 2,000 lbs # ASR2KHDS04 This will give your trailer the...
    view full answer...
  • Hub & Drum And Electric Brakes For 2,000 lb Timbren Axle-Less Suspension System
    We do have the correct hub and drum as well as electric brakes you can use with the 2,000 lb Timbren Axle-Less system, though it is different than the hub you mentioned. That hub does not have the correct bearings to fit the spindle of the Timbren system, so instead, here is what you need: - Timbren Axle-Less Trailer Suspension System - Spindle w/ Brake Flange - Regular Tires - 2,000 lbs # ASR2000S02 - Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ - Electric Trailer Brake Kit -...
    view full answer...
  • Adding Electric Brakes to Mehler 3750 lb Axle
    From my research, it looks like your 3750 lb axles use the same bearing kit as a standard 3500 lb axle. I wasn't able to determine from the Mehler Group website which bearings your spindles use, but you can easily determine that by pulling one of your hubs. As long as the bearings on your current hub are an L68149 inner and an L44649 outer, and your current wheels have a 5 on 4-1/2 inch bolt pattern, the # 84546UC3-EZ hub drums you mentioned would be compatible. Your photo shows that the...
    view full answer...
    Image 1 for
  • Electric Brakes and Hub/Drum Assemblies for Dexter 3500 Axle
    I can definitely help you out with what you're needing, but we don't have full-on kits with the brake sets and hub/drum assemblies basically because most of the time people are only needing to replace one or the other, and then there are some variances between what fits so there would be just about as many options as we currently have. With all of that being said, the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 can be paired with the Dexter Trailer Hub and Drum Assembly...
    view full answer...
  • Correct Replacement Hub/Drum for Roadmaster Tow Dolly with Electric Brakes RM3477
    The correct replacement hub/drum for the Roadmaster Tow Dolly with Electric Brakes (RM3477) part # RM-2050-1 is the Dexter Trailer Hub and Drum Assembly part # 84546UC3-EZ. This is a complete kit and what I recommend using to get back up and running. The retainer or cotter pin likely came out causing the castle nut to back off and that is what caused the hub to become loose. There could have been damage to the hub or bearings and races which is why I recommend a full replacement.
    view full answer...
  • Option For Replacement 2,200 lb Axle System on Boat Trailer
    While we have an option for your suspension system, there aren't standard axles of that size, but what will work for you is an axle-less system from Timbren, and there is even an option for one with a lift if you want a little more height: - Timbren Axle-Less Trailer Suspension System # ASR1THDS01 or - Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle # TASR1THDS04 Both of these are 2,200 lb capacity systems that have a brake flange if your boat trailer has brakes. The Timbren...
    view full answer...
  • Bearing Kit for Dexter D28H Axle on Calkins Trailer
    A Dexter D28H axle is rated for 2800-lbs and its spindle requires a hub that uses inner bearing # L68149 and outer bearing # L44649. For a bearing kit you can use # BK2-100. These are the same bearings used in the hub/drum # 84546UC3-EZ that you referenced. This hub is rated for 3500-lb axles.
    view full answer...
  • Recommended Spindles and Electric Brake Assemblies with Parking Brake for Trailer Build
    For that axle dimension, you would need to use the Timbren Axle-Less Suspension System. This will allow you to determine the distance of your hub faces and simply cut a 2 inch square bar to length to use in the integrated holes. I recommend you use the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05. With these spindles, you can then use the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ....
    view full answer...
  • Can Dexter 10 inch Brake Assemblies Fit Timbren Axle Less # ASR35HDS02
    A 10 inch Dexter hub/drum part # 84546UC3-EZ will fit on the Timbren Axle-Less kit part # ASR3500S06 that you referenced. Then for a set of self-adjusting brake assemblies to fit this you'd just need the part # 23-468-469 as well and you'd be set.
    view full answer...
  • Will Timbren Axle-Less System Allow Lower Deck Height on Trailer?
    There is a Timbren Axle-Less Suspension System which will allow you to lower your deck height, though it won't give you quite the amount you are looking for. The Timbren # A35RD545E has a 4-inch drop spindle so it will lower your deck height by that much. This system comes with electric brakes and hubs with a 5 on 4-1/2 bolt pattern. You would be able to use a wheel and tire combination such as the Provider # TA82MR which have 14-inch wheels and a total diameter of 26.1 inches.
    view full answer...
  • Availability of 15 x 6 Trailer Wheels With 5 On 5 Bolt Pattern
    The 5 on 5 bolt pattern is not very common so the choice on wheels is fairly limited. We have the following wheel styles that fit your 15" x 6" with a 5 on 5 bolt pattern criteria: -Dexstar Steel Spoke Trailer Wheel - 15" x 6" Rim - 5 on 5 - White Powder Coat # AM20528DX -Vesper Steel Modular Trailer Wheel - 15" x 6" Rim - 5 on 5 - Black # TA97RR -Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 5 on 5 - Silver Powder Coat # AM20538DX -Vesper Steel 10-Spoke Trailer Wheel - 15"...
    view full answer...
  • Option to Upgrade Axle to 3,500 lb Axle-Less System & Hub With 5 on 4-1/2 Bolt Pattern
    While there's an option to consider, the shortest 3,500 lb axle is 89 inches hub face to hub face, so the only option for upgrading to a 3,500 lb axle is using an axle-less system: - Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05 The Timbren are simply bolted or welded so you do not have to worry about finding an axle that meets any specific measurements. Also, leaf springs are also not needed because they have progressive springs built in...
    view full answer...
  • Measuring To Determine If Timbren Axle-Less Trailer Suspension Fits a 2022 Encore Camping Trailer
    To verify if you will be able to use the Timbren Axle-Less Trailer Suspension System # ASR3500S04 on your 2022 Encore ROG overlanding camping trailer there are some measurements you will need to take. This system will place the hub face of the wheel 6" from your trailer frame and the wheel centerline will be 1/4" below the frame with 1-3/4" vertical deflection. It appears your trailer came with a 2,500lbs axle and 15" wheels so you may be able to use the same brakes, and hubs from your...
    view full answer...
  • Should Trailer Hub/Drum be Replaced if it Has 1/8" Groove
    A trailer hub & drum should be smooth, and should not have any groove in it. A 1/8" groove is pretty concerning and you should replace the drum right away, turning them won't work. I have added a link below to our selection of hubs which you can filter to find the right one, like for a 3,500 lb hub and drum the Dexter # 84546UC3-EZ.
    view full answer...
  • Can LubriMatic Marine Grease Be Used with Dexter Axle Pre-Greased Hub Assembly
    You can mix the LubriMatic Marine Trailer Wheel Bearing Grease # L54FR with the grease that comes in your Dexter Trailer Hub & Drum Assembly # 84546UC3-EZ, but if you want an exact replacement then you want to use the LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red # L11380. This Prime Guard is a lithium complex base while the Marine style you mentioned calcium sulfonate base. According to our compatibility chart (see attached) these are okay to mix together, but it's...
    view full answer...
    Image 1 for
  • Will Trailer Hub and Drum # 84546UC3-EZ Fit an ALKO 3500 Pound Axle
    I read through the other question you sent and I can clear some things up for you. First, the ALKO axle brake mounting flanges have a different bolt pattern than do Dexter or similar assemblies when you go up to a 12 inch brake assembly and that is why they will not fit ALKO axles. The top mounting holes on an ALKO mounting flange are wider than they are on a Dexter. But on a 10x2-1/4 inch brake assembly the 4 bolt pattern should be the same. So you can use other 10x2-1/4 inch assemblies...
    view full answer...


< Previous
123. . .8



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Rick A
Installed by:
Rick A
Employee Andy C
Installed by:
Andy C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Carrie F
Updated by:
Carrie F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924