bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter
  3. 5 on 5 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased

Item # 84556UC3-EZ
Our Price: $154.26
Trailer Hubs and Drums
Shipping Weight: 22 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Great Prices for the best trailer hubs and drums from Dexter. Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased part number 84556UC3-EZ can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (58)
  • Q & A (0)
  • Photos

Dexter Trailer Hubs and Drums - 84556UC3-EZ

  • 5 on 5 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Pre-Greased
  • L44649
  • L68149
  • Dexter

This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Pre-greased hub is easy to install - no need to pack bearings
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 3,500-lb trailer E-Z Lube axles with #84 spindles
  • Wheel size: 13" to 15"
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Works with 10" brake assembly
  • Bolt pattern: 5 on 5"
  • Grease cap flange diameter: 1.98"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,750 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube-Compatible Hub for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-249-1G Dexter Pre Greased Trailer Hub and Drum Assembly - 3.5K Axle with Hardware - 5 on 5

Replaces 84556UC3-EZ and 008-249-95





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased - 84556UC3-EZ

Average Customer Rating:  4.8 out of 5 stars   (58 Customer Reviews)

This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

by:

Last Saturday, after several weeks of research, my wife and I purchased a trailer. It had everything we wanted except for brakes. I asked the dealer if they could install brakes, he said it would take weeks if not longer for him to get the parts and then he would have to arrange for them to be installed.

I told the dealer that I had already done some preliminary research on eTrailer.com for brake parts. On a long shot, I asked the dealer if he could beat eTrailer.com prices for the brake parts and if so I would install. To the dealer's credit, he told me I would be much better off getting the brake parts I needed on my own. So, late Sunday evening I went onto the eTrailer.com website. After taking a couple of measurements to ensure I was ordering the correct parts, I placed the order. Their website is user friendly and intuitive, and the tutorial videos are excellent.

Early Monday morning I got a message from one of eTrailer's employees notifying me that my parts had shipped. He also offered his services if I needed anything further or if I had any questions. I did have questions, so I called him, I wanted to confirm that I had ordered the correct bolt pattern for the hub/drums. Within a couple of minutes we confirmed that I had taken the correct measurements. The reassuring part was, he said if you find the hub/drums are not the correct ones, let me know and we will get a return label out to you and get the correct parts out to you.

By early Thursday afternoon the parts had arrived. I had already watched the installation tutorial video that is on their website. Following the video process, the install was straight forward and PAINLESS. This company is so refreshing!

Ken

11/15/2017

Thanks for the follow up. For almost 10 years now, I have been very happy with the service, products and value that I get from etrailer. So much so, that I refer friends and family to your website as their needs arise. As the mechanic in the family, and around the neighborhood, I often have people approach me for help. Several times a year I find myself referencing etrailers website to find a part we need or that will make a job easier to complete. Additionally, I CANT SAY ENOUGH how helpful etrailers on line video library has been with installations and to help answer questions or trouble shoot problems. I really appreciate that etrailer would take the time and resources to build such a library to help their customers.



by:

Excellent product, easy installation, brakes work great

Mark

8/5/2023

Still working great



by:

Easy to install, helpfull staff and fast shipping . I installed a switch to turn on all my brakes for loading and I turned it on to check the brakes and when I released it I herd the brakes adjust (almost felt giddy) no more crawling under the trailer for adjustment! You cant see any difference in the trailer but, i know my brakes will work for a long time to come. THANK YOU etrailer.com for an easy pleasant experience and all of the help in the past. you have made me want to come back for future parts.



by:

I installed these Dexter 10" Nev-R-Adjust Electric Trailer Brake Kit with Hub & Drum Assembly on my 72"X10' trailer (that came equipped with a Dexter axle) to help ease the brake load as well as preventing rotor warping on my F150 especially during heavy loads. I have pretty much eliminated any 'push-thru' effect when braking especially for the unexpected quick stop(s). They were easy to install and (so far) have been low/no maintenance.



by:

Heads up!!
ordered 4 sets of hub, drums
and brakes over two years ago for a project I've been slowly working on. when I received the items, I noticed the packaging was damaged and reported it to etrailer. 2 years later, I finally went to use the items and discovered the bearings, caps and races had been damaged. I notified the management at etrailer and within a week had complete replacements.
What company in this day and age is willing to stand behind a damage claim two years on? Truly remarkable customer service and willingness to go the extra mile.
etrailer, You've won me forever as a devoted and satisfied customer. you guys are rock stars! Thank You.



by:

I upgraded my open bed car-hauler's electric brakes from single axle to double axle for added safety. My trailer was originally set up with manual adjusters on one axle and they stopped okay when new; but adding the second set adds absolutely unbelievable stopping power and stability. The best part; they went on in about three and a half hours. I replaced the original units on the existing axle, bolted new matching units on the front and wired them in with no problems. Dexter quality is excellent. I used the new brake assemblies and new drum assemblies and they are really nice units. It was only a few bucks more to replace with new than to rebuild the old units.



by:

The hub, drum and brakes were excellent quality and everything was included that was needed to facilitate the perfect install. The guys at e-trailer were extremely helpful and their response to my mistake of ordering the wrong drums was immediate and fast. This is one top shelf company; I will definitely deal with them in the future.



by:

The products I ordered were as I expected. Everything arrived quickly and without damage.
My only negative and a warning for others, if you are ordering similar parts with the intention of adding brakes to an axle...
1) There are no nuts to attach the brake assembly backing plate with. Even if I was replacing an existing unit, I would want fresh hardware.
2) The bearing/seal assemblies for the hub do not include a new washer/retainer/nut for the axle. Again, anyone replacing these would want fresh hardware.



by:

I had a tandem axle trailer that only had brakes on the rear axle. ordered these hubs and brakes the fit perfect and now I have more braking capability.



by:

Heavy items were packed nicely in heavy duty box. Everything was received intact and complete. Delivered quick, day UPS guy came was 100 degrees and very humid. Poor guy never made it to door, but set it next to trailer which was fine with me. I used a dolly to get it inside. Parts all fit perfectly, only issue i had was getting very last bolt removed from old brake plate. The nut broke loose from plate, couldn't get nut off. So used angle grinder, problem resolved. Install was smooth and easy.



by:

I installed the new electric brakes and drums on a new off road teardrop type camper we just purchased. I have always had excellent service with Dexter axles and the parts I just installed were as usual, top quality. Thank you!



by:

My first order did not go through because I failed to change my billing address for my card and my card was declined. etrailer.com contacted me right away and I reordered my brakes. They showed up quickly and were exactly what I ordered. Communication was great, price was awesome, and our trailer is back in service. I have bought from etrailer before and will do so again. Thanks etrailer.com!



by:

Great product. Super easy to install. Highly recommend to anyone needing brakes.



by:

etrailer customer service is excellent with fast response and super fast delivery. this dexter drum is biffier than the china ones and better made. excellent service and great dexter product. cant beat this!



by:

Working great. This was a replacement for a factory hub that failed. I just checked the bearings last week and they look like they did a year ago.
Thanks!



by:

Customer service at etrailer.com was nothing less than fantastic. Hub arrived as described. All of the necessary components were included in the package. Easy to put together and install.



by:

Good quality drum and bearing races were already installed so that was a chore i didnt have to deal with. I didnt care for the China brand bearing otherwise it was a good fit for my Dexter EZ lube axles.



by:

Have not installed it yet so I can't review the product. I can tell you that etrailer's customer service is top notch. I called about a shipping delay after I placed my order. They assured me it would only be a day and not a week like my order confirmation said. Called back the next day and my order was already shipped. Good people to do business with.



by:

These drum/hub units are great quality and price. Everything is supplied to make installation fast and easy. Ordering was easy with salespeople that know their products. Very happy dealing with etrailer..



by:

I ordered Hub/Drum Assembly, 10" Nev-R-Adjust Break Assembly and seals. Products were as advertised. Shipping was very Fast.



by:

Good fit and finish, this drum with bearings fit nicely. The bearing cap was properly installed but did end up falling off after about 100 miles of use but that's a cheap part that can be obtained online.



by:

What can you say about brake drums? Everything fit like it was supposed to. I found the video on bearing adjustment useful.



by:

I was broke down, ordered a new drum in the early afternoon. It was shipped the same day and I was back in business in 48 hours.
Good parts, good prices, and good shipping. Etrailer gets all my parts business.



by:

Fit right (thanks to etrailer staff for asking the right questions) easy to install. Kinda wish the adjusting holes were a bit bigger, but they work.



by:

Product is as advertised. 5 on 5 bolt pattern and fits a ten inch brake. Comes with what is in the picture. Note: there is no Cotter pin, nut or washer included. Should be no problem to reuse the old but if you can't you need to order separate.


25
58
Show More Reviews

See what our Experts say about this Dexter Trailer Hubs and Drums

  • How Tight Should the Castle Nut be When Installing a Trailer Hub or Hub and Drum Assembly
    What our installers do is tighten the castle nut with channel locks then back it off. He does this several times to ensure it is all the way on then backs it off one notch to the next nearest slot for the pin or tang washer. I have linked an installation video below showing this.
    view full answer...
  • Distance From Wheel Mount Surface To End Of EZ-Lube Grease Cap On EZ-Lube Hub And Drum Assy
    I have attached photos of the Trailer Hub, part # 84556UC3-EZ, and of the 2 grease caps that are included. The distance from the hub where the wheel mounts and the top of the hub opening that the cap installs, is 1-5/8 inches. With the EZ-Lube cap installed, that adds an additional 1 inch, so the total is 2-5/8 inches from the wheel mounting surface to the end of the EZ-Lube grease cap. If you decide to use the standard grease cap that is included instead of the EZ-Lube cap, the total...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Outer Diameter of the Hub Bore for Trailer Hub and Drum Assembly 3,500-lb Axles 5 on 5 E-Z Lube
    I went out to the warehouse and pulled trailer hub and drum assembly # 84556UC3-EZ to measure the outer diameter of the hub bore. I used digital calipers to take the measurement and came up with 2.659 inches in diameter.
    view full answer...
  • How to Measure the Bolt Pattern to Make Sure the Correct Drum is Ordered?
    As you are getting a measurement that is slightly off, I am going to suggest one more way to confirm your bolt pattern. Attached is a link to a printable diagram that will confirm which you have. Make sure you print at 100% on 8.5x11" paper. We do have a drum kit that matches the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 # 84556UC3-EZ, but has a 5 on 4 3/4 bolt pattern ( # 845476UC3-EZ ), so I highly suggest using the printable diagram to...
    view full answer...
  • Re-Surfacing Specification for Hub/Drum Assembly on 3500-lb Axle
    First, thank you for your recent order from etrailer. Most hub/drum assemblies, including the Dexter # 84656UC3 that you purchased, will indicate their maximum re-bore dimension right on the hub outer surface. Please refer to the photo I have linked for you.
    view full answer...
    Image 1 for
  • Hub and Drum for a Dexter 3,500 Lb Axle with 5 on 5 Inch Bolt Pattern
    The correct hub/drum for your Dexter 3,500 lb axle is more than likely going to be the Dexter Trailer Hub and Drum Assembly part # 84556UC3 or part # 84556UC3-EZ (E-Z Lube). The L68149/L44649 bearings and 10-19 grease seal that this kit uses is fairly standard for this axle. However, there are certain instances in which this is not the case. In order to be sure you can either give me the serial number off of the white tag on the axle or read me the bearing and seal numbers off the parts...
    view full answer...
  • 3,500 Hub and Drum Assembly Recommendation with 5 on 5 inch Bolt Pattern
    For a similar hub as the Dexter hub and drum part # 8-247-50UC3-EZ with a 5 on 5 inch bolt pattern you would want the Trailer Hub and Drum Assembly part # 84556UC3-EZ. For a pair of these you would just need to order a quantity of 2.
    view full answer...
  • Recommended Hub and Drum Assembly for Homemade Trailer with Rubicon Wheels
    The Dexter Trailer Hub and Drum Assembly # 84556UC3-EZ referenced in your answer is a 5 on 5 inch assembly that is designed for most 3,500 pound axles. The drum dimensions are 10 inch diameter x 2-1/4 inches wide. This will slide over the axle spindle on the trailer you are building. Whether this assembly will be compatible will depend on the capacity of the axle you have and also the spindle dimensions. I have attached an image that shows the different measurements you can take on a spindle...
    view full answer...
    Image 1 for
  • Dexter 8-249 Trailer Hub And Drum Replacement
    We do have the correct replacement hub and drum for your Dexter 8-249, and there are a couple of options. The only thing that separates them is if you have an E-Z Lube axle (your spindle will have a grease zerk) and what your hub's bolt pattern is. You will want to match your bolt pattern so you can match your current wheels, and you will have either a 5 on 5" bolt pattern or a 5 on 5-1/2" bolt pattern. If you are unsure, I have added a link below to a printable bolt pattern template,...
    view full answer...
  • Are The Dexter Nev-R-Adjust Brakes Available With The Brake Drums as a Package?
    We do not currently offer the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 you found with the brake drums as a package. This is mainly due to the large selection of brake drums which will work with these brakes. Here is just of few of the standard hub/drum kits listed below by the bolt pattern for the wheel. These hubs are sold individually per side so you will need 2 to go along with the brake kit above. 5 on 4-1/2" # 84546UC3-EZ 5 on 4-3/4" # 845476UC3 5 on 5" # 84556UC3-EZ 5...
    view full answer...
  • Should Washer Be Installed on Trailer Spindle Prior to Nut and Cotter Pin for Hub Assembly
    Yes, when installing a hub and drum like the 3.5K Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-EZ-K, you will want to have a washer installed as it helps to keep the bearing evenly compressed inside the hub. Attached is a sample installation video for you to check out.
    view full answer...
  • Replacement 10 Inch 5-on-5 Bolt Pattern Brake Drums for Old Car Trailer
    I did a Google search on the information you found on your brake drums and wasn't able to find anything conclusive regarding a replacement. We offer one 10 x 2-1/4 inch brake drum with a 5 on 5 bolt pattern, part # 84556UC3 for a standard or # 84556UC3-EZ for an EZ-Lube spindle. If your existing hub uses an #L68149 inner and an # L44649 outer wheel bearing, either of these hubs would be compatible. The hubs include the bearings, races, seal, grease cap, wheel bolts and lug nuts. If you...
    view full answer...
  • Determining Replacement Hubs for EZ Lube Spindles
    EZ Lube spindles are compatible with all idler hub and brake hub and drum assemblies, and the only difference is the seal and grease cap. To determine the correct replacement hub for your trailer, you will need to pull off your existing hubs to determine the bearing numbers. The difference between the EZ lube hub and drums and the non EZ lube hub and drums is the grease cap and seal. The EZ lube ones like the # 84546UC3-EZ have a removable rubber seal on the cap that allows you to access...
    view full answer...
  • Correct Brakes for Big Tex Tandem Axle Trailer with 8-249 Hub
    It looks like you have a Dexter 3,500 Lb Axle so in order to replace the braking assemblies you can use the Electric Trailer Brake Kit part # AKEBRK-35-SA. If you want to replace the hubs as well then you can use the Dexter Trailer Hub and Drum Assembly part # 84556UC3-EZ.
    view full answer...
  • Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00
    We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents. The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively. The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you want...
    view full answer...
  • Replacement Hub/Drum and Brake Assemblies for 2010 Jayco Jay Flight 23FB
    For your 2010 Jayco Jay Flight 23FB the correct hub/drum is the part # 84557UC3-EZ which is a 3,500 lb axle hub/drum with a 5 on 5-1/2 inch bolt pattern. This comes with bearings and seals but if you wanted them separately you'd want the bearing kit # BK2-100. For brake assemblies you'd want the part # 23-468-469.
    view full answer...
  • Comparing 3,500 lb Dexter and etrailer Axle Hubs for Trailer with 5 on 5 inch Bolt Pattern
    All of the hubs you mentioned are correct for your application as they are for 3,500 lb axles with a 5 on 5 inch bolt pattern like you need. The brake assemblies part # 23-468-469 would also work with them all as well. So the Dexter brand is widely considered to be the highest quality so that would explain why they cost more. The Dexter hubs # 84556UC3-EZ have the EZ lube grease cap that allows you to access the grease fitting by pulling off the rubber plug. The part # 84556UC3 is exact...
    view full answer...
  • Replacement Electric Trailer Brakes for a Dexter 8-249 Hub
    You have done your research! I can confirm that the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K item # 23-468-469 is the correct brake kit you need for your Dexter 8-249 drums. If you are interested in replacing your Dexter 8-249 drums we have two options. The first is in a 5 on 5-1/2 bolt pattern item # AKHD-555-35-K. The second option is a 5 on 5 bolt pattern item # 84556UC3. If you trailer currently has a functional 7-way connector...
    view full answer...
  • Can Dexter Trailer Axle w/ Electric Brakes 7359765-EB Be Ordered With The 5 on 5" Bolt Pattern?
    I would be happy to piece together an axle with the components you need, but unfortunately the Dexter Trailer Axle w/ Electric Brakes # 7359765-EB you were looking at cannot be ordered with hubs that have the 5 on 5" bolt pattern you are needing. Instead you will need to go with the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs # 7359765 which has the 95" hub face measurement and 80" spring center measurement you mentioned that you need, Dexter Electric Trailer...
    view full answer...
  • 5 on 5 inch Bolt Pattern Hub and Brake Assembly for Trailer with Hub 008-256-07
    The hub part number you mentioned matches info we have for a 3,500 lb trailer axle hub but there aren't any hubs with a 4 lug bolt pattern for a 3,500 lb axle though. Did you maybe mean a 4 lug bolt pattern for the assembly to the spindle.
    view full answer...
  • Hub Assembly For Timbren Axle-Less Suspension System ASR35HDS02
    I do have an option for you but the bearings that fit the spindle of the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 are part # 25580 for inner and part # 15123 for outer. There is not going to be a 5 on 5 bolt pattern hub with those bearings. You would need the 6 on 5-1/2 Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ to use this particular system. If you want to use your existing wheels with the 5 on 5 bolt pattern you can use Dexter Trailer Hub and...
    view full answer...
  • Parts Needed To Swap Out The Axle On A 1991 M101A2 Military Trailer
    If you're going to swap out your trailer's axle you'll first need to measure the distance from center to center for the spring seats (B) and from hub face to hub face (A) to find the correct length. Then we can narrow down the selection to a 3,500lb weight capacity and choose compatible hubs. For example if you had a hub face measurement of 89" and spring center measurement of 74" you could use part # T3584F-8974. Next you would need some hydraulic drum brakes like part # AKFBBRK-35 since...
    view full answer...
    Image 1 for
  • Timbren Axle-Less Suspension Recommendation for M1101 Trailer
    From my available specs on your M1101 trailer, it has a maximum vehicle weight of 3,400 pounds. It also looks like it uses off-road tires. With that capacity and tire type, we only carry 2,000 pound Timbren Axleless systems that are compatible with the 5 on 5 bolt pattern you need. That is the # ASR2KHDS09. The hubs that go along with this are the # 84556UC3-EZ. With this system, you will be limited to a 2,000 pound weight capacity. As far as brakes, I always recommend Nev-R-Adjust...
    view full answer...
  • Why Does Timbren Axleless 2k Axle Kit Use 3,500 lb Hub/Drums and Brake Assemblies
    The HD Timbren axle less 2k axle kits use the 3,500 lb trailer spindle since it's a little heavier duty which is why the hub/drums and assemblies seem to be rated too high. So the # ASR2KHDS03 does use the # 23-468-469 and the # 84556UC3-EZ.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Patrick B
Installed by:
Patrick B
Employee Jeff D
Installed by:
Jeff D
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.