Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included.
Features:
Specs:
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (223 Customer Reviews)
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included.Item is damaged, 1 lug nut missing, 1 stud cross thread, dust cap damaged.
I was in desperate need for new hub/drum assemblies for my flatbed trailer. Once again etrailer came through for me. I particularly like the fact these arrive assembled with seals and pre-packed bearings.
Just got back from trip to Bowling Green. Pulled camper with 3/4t Ram. Adjusted electric brake and all worked perfect. Now, I did have 3 tire separations. They were 3318 date code load E on a 6500# camper. 3 of four separated, today replaced. Now FYI, 3 YEARS REPLACE TIRES!!! I try to replace between 3 to 5 years but haven't used the camper but 4 times and about 2k miles.
I like ordering from here because of good service and quick delivery. I’ve only got about two thousand miles on my trailer since I changed bearings and hubs but everything seems to working out very well so far,very satisfied.
Our Flat bed trailer can do some pretty heavy work however we do not use this trailer all the time.
When the brakes failed we ordered from etrailer and the parts came in and we installed them without much ado.
Thank you for having all the parts we needed. After a year of seldom but heavy usage the self adjusting brakes are still working splendidly.
these arrived ups in poorly wrapped boxes with one hub openly displayed but after close inspection it appears no damage and they fit onto the hub without issue. like they're pre-packed with grease, bearings so they are ready to install. they slid on easily and matched up with new brakes ordered earlier. all around great package for brakes overhaul. highly recommend
Christina helped me make sure that I ordered the correct hub. Ordered on Monday arrived on Thursday. Hubs came assembled and greased as advertised. Not knowing what grease was in the hub, I was concerned that there might not be enough grease to finish the job, like coating the axle or that finishing touch on the outer bearing. No worries, there was plenty of grease, more than I would have normally used. I'm not a grease expert but it seemed to be good stuff, very sticky and not overly stiff. I noticed that the couple of places that I could see a bearing, that the bearing had been pressure packed with streams of grease between the rollers. The hubs came in heavy, individual, corrigated boxes, and in a heavy plastic bag, perhaps explaning why they were clean and not banged up when I got them. Each end of the hub had a plastic plug in it to keep it clean. You'll need your axle washer, nut and retainer. Good on ya' Etrailer.
Hub and drum assembly fell apart in the center within one year! Bearings look fine!
This was a perfect fit replacement assembly, pre-greased and everything ready to go. It made the repair an easy process.
Great alternative to putting OE Dexter brakes on. Saved us over $1000 on each of our trailers that needed brakes replaced!
This was way easier than expected, the hardest part was the mess inside, but installing the kit per the online video instructions was a snap and I encourage anyone to do theirs. Here's a couple after pictures.
The hubs bearings and seals are outstanding products and pretty simple to install. I had a small issue with the dust caps as they were to tight to just tap into the hub. I like the fact that the wheel studs in these hubs are a little longer than factory parts!
Great Product.
Hubs were bent, poor packaging
Doing everything I was wanting it to do.
Parts were an exact match. I replaced the brake assemblies, drums and bearings on my toy hauler. Was not sure these would work with Lippert 5200 lb. axles but, etrailer assured me I was buying the parts I needed.
David W. Was awesome!!!!! Got 4 hubs in three days, delivered to the campground.... amazing!!! Have the ability to return home after vacation. Unbelievable!!
The product seems ok. I ordered four and two packages out of the four were damaged to the point the grease was coming out of the outer bearing, covering the outside of the box.
Perfect fit. Fast shipping
We have ordered many hubs for trailers through here and they are always so prompt at getting them to us.
The wheel hub was extremely easy to replace. The video went into detail on how to remove the old and install the new. Since my RV was parked in a austere place, I went in prepared and the replacement was quick and easy. The wheel hub was exactly as described. It arrived a couple of days late but that was purely due to a bad winter storm that shut everything down.
I purchased this hub assy to replace a bad hub on a Lippert 5200# axle (race was spinning). Also replaced brake shoes on both sides of axle using shoes ordered at same time hub was ordered from e trailer. Hub & brake shoes have been installed and tested. All works fine. The replacement hub and shoes were an exact match to old parts except for some minor casting differences in replacement hub exterior. Hub and brake shoes were shipped in the same carton and although hub movement squashed a brake shoe box in transit all parts were there and none had damage. Parts arrived 1 day ahead of schedule. Hub assy is very complete, I only needed to supply grease and cotter pin. I was unable to install new hub dust cover supplied for some reason, seemed oversize, but old one fit fine. I will use e trailer again because of my positive experience with my order, Thanks.
After the old backing plate was removed from my 20 year old boat trailer, the installation of the new backing plate and break assemble took less then one hour . The drum with the bearings installed slid right on .
These brakes are excellent. I have had zero issues with them since the day they were installed.
NOTE: On average I haul around 8K lbs and also not often so take my review with a grain of salt. Sometimes the load is heavy (a front end loader) and other times it's not (trash run). Either scenario, no issues. A quick gain adjustment and brake check and I'm gone. I checked the bearing play after a week or so and around the 8 month mark. Both times were A+. I think I'm 17 months into ownership. They're still working flawlessly.
When new, these drums had little OOR (out-of-round) which surprised me. Most drums have some sort of noticeable OOR. These no so much. My trailer stops quietly and effortlessly now. No pulsation, skipping, tugging, etc.
Would I buy these again? ABSOLUTELY!!
Seems to work well no visible problems. Not sure what kind of grease was used in hub. Hopefully it wasn't a moly grease or the hub won't last long. Was to much in it to clean so took the chance. Would of liked it to come without any so I could use #2 lithium.
great product. super easy to grease wheel bearings with these. easily remedies one of the most forgotten and most important parts of trailer maintenance.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.